Tender For 31. Renovation Of Govt. Building And Toilets And Boundary Wall, Cross Nalli Pipe, Pipe Cross, Iron Jalli, Ferro Cover And Repair And Construction Of Cc Road In Ward No. 31, Nathdwara.
Tender Value
20 Lakhs
Estimated cost
Bid Submission
22 Aug 2024
0 days left
EMD
40000
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
nathdwara → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Renovation Of Govt. Building And Toilets And Boundary Wall, Cross Nalli Pipe, Pipe Cross, Iron Jalli, Ferro Cover And Repair And Construction Of Cc Road In Ward No. 31, Nathdwara.
BOQ
| Sl. No. | Item Description |
| 1 | Dressing of earth work in surface excavation including cutting and filling upto 30cm depth including disposal of excavated earth upto50m and lift upto 1.5 m. |
| 2 | Dismantling of existing structures like culverts, bridges, retaining walls, CC road and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever necessary,sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 50 metres as directed by Engineer.Cement Concrete Grade M-15 and above and PCC blocks |
| 3 | Earth work in excavation for roadway, including trimming bottom and side slopes in accordance with requirement of line, grades and cross sections, including disposal of surplus material with all lift and lead upto 1000 metre as per MoRT&H specification clause 301.In ordinary rock |
| 4 | Earth work in excavation in foundation, trenches etc. including dressing of sides and ramming of bottoms, including getting out the excavated material, refilling after laying pipe/ foundation and disposal of surplus excavated material at a lead upto 50m suitable site as per direction of Engineer for following depths, below natural ground / Road top level. In all types soils/ saturated soil such as moorum, sand, sandy silt, clay, black cotton soil, kankar, etc.depth uo to 1.5 m |
| 5 | Dismantling of existing structures like culverts, bridges, retaining walls, CC road and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 50 metres as directed by Engineer.Lime Concrete, cement concrete grade M-10 (1:5:10) and below |
| 6 | Dismantling Brick / Tile work In cement mortar |
| 7 | Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring, shuttering, finishing and reinforcement - All work upto plinth level :1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 8 | Brick work with FPS bricks of class designation 75 in foundation and plinth in: Cement mortar 1:6 (1 cement :6 coarse sand) |
| 9 | Half brick masonry with FPS bricks of class designation 75 in superstructure above plinth level upto two stories. Cement mortar 1:4 (1 cement :4 coarse sand) |
| 10 | Cement plastering including T&P, scaffolding, material and complete labpour, including cost of water, curing, racking of joints etc. with 12 mm cement plaster of mix : |
| 11 | Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - All work upto plinth level :1:2:4 (1 Cement : 2 fine/ coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 12 | Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work |
| 13 | P & F indian type white glazed viterous china 1st quality W.C. orissa pan (I.S:2556 Mark) kwith 100 m vitreouts china P or S trap including cutting and making good the wall and floor. Size 580 x 440 mm |
| 14 | Finishing walls with textured exterior paint of required shade : New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including base coat of water proofing cement paint applied @ 2.20kg/10 sqm. |
| 15 | SS wire gauge with average width of aperture 1.4 mm on bothdirections with wire of dia 0.63 mm |
| 16 | Structural steel work riveted, bolted or welded in built up sections,trusses and framed work, including cutting, hoisting, fixing in positionand applying a priming coat of approved steel primer all complete: |
| 17 | Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring, shuttering, finishing and reinforcement - All work upto plinth level : 1:1½:3 (1 cement : 1½coarse sand : 3 graded stone aggregate 20mm nominal size) |
| 18 | Centring and shuttering with plywood or steel sheet upto two stories or height upto 7.5 metre above plinth level including strutting,propping etc. and removal of form for : Lintels, beams, plinth beams, girders, bressumers and cantilevers. |
| 19 | Columns, Pillars, Piers, Abutments, Posts and Struts. |
| 20 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets,columns, pillars, piers, abutments, posts and struts etc. upto two stories excluding cost of centring, shuttering, finishing and reinforcement : 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20mm nominal size) |
| 21 | Random rubble masonry with hard stone in foundation and plinth Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 22 | Extra for random rubble masonry with hard stone in superstructureabove plinth level and upto two stories. |
| 23 | Reinforcement for R.C.C. work at all levels including straightening,cutting, bending, placing in position and binding all complete. Cold twisted bars |
| 24 | Providing & fixing door, window, chowkhats and other frames, including antitermite treatment, M.S. flat, hold fasts of size 250 x 40 x 3mm fixed with M.S. bolt 5mm dia 50mm long duly embedded in cement concrete M-15 grade :Second class teak wood |
| 25 | Providing and fixing white vitreous china wash basin includingmaking all connections but excluding the cost of fittings :Angle back wash basin of size 400x400mm |
| 26 | Providing and fixing 1st quality MAT finished ceremic tile size 300x300mm confirming to IS : 13755 and IS : 15622 colour such as white, grey, ivory, fume red brown, light green, light blue and other light shades in floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (including the cost of cement mortar bed 1:4). |
| 27 | Providing and fixing 1st quality ceramic glazed vitrified tiles of colour standard white, grey, ivory, fume, red brown, light green, light blue, and other light shades with water absorbtion less than or equal to 0.08% confirming to IS : 13753 & IS : 15622 in floor, steps etc laid on bed on neat cement slury finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (excluding the the cost of cement plaster on wall and pillar) size 600mm x 600mm |
| 28 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitablelocking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank |
| 29 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 15 mm nominal bore. |
| 30 | Providing and fixing brass stop cock of approved qualit 15 mm nominal bore. |
| 31 | 110 mm ID/ND PVC-U pipes (stiffness class SN 8) as per IS 15328 |
| 32 | 110 mm dia U-PVC double/ single socketed 90° bend (class III, 6kg/sqcm) confirming to IS:7834 |
| 33 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work including cutting chases and making good the walls etc.,(A)15 mm nominal outer dia .Pipes |
| 34 | (B)20 mm nominal outer dia .Pipes |
| 35 | Granite stone of any colour and shade. |
| 36 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with PVC/ neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-incharge . (Cost of aluminium snap beading shall be paid in basic item) : With float glass panes of 5.50 mm thickness |
| 37 | Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Rectangular shape 1500x450 mm |
| 38 | Providing and fixing PTMT Bottle Trap forWash basin and sink.Bottle trap 31mm single piece moulded with height of 270mm, effective length of tail pipe 260mm from the centre of the waste coupling 77mm breadth with 25mm minimum water seal, weighing not less than 260gms. |
| 39 | P.T.M.T. Bottle Trap 38/40MM |
| 40 | P&F of Heavy duty capacitor start 900/1400 RPM single phase ISI marked Exhaust fan,IS:2312 marked in existing opening including making connections testing etc. as required 300 mm sweep(900/1400 RPM) |
| 41 | Providing and fixing external grade board solid core single leaf flushdoor shutters ISI 2202-67 marked using Phenol formal dehyderesinin glue both sides including approved ISI marked Stainless Steel butthinges fittings with necessary screws complete as per annexure \"A\" :Decorative teak veneer One side |
| 42 | Extra for Providing and fixing flush doors with decorative veneering on one side |
| 43 | Providing and applying plaster of paris putty of 2 mm thickness overplastered surface to prepare the surface even and smooth complete |
| 44 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,having thermal stability for hot & cold water supply including allCPVC plain & brass threaded fittings i/c fixing the pipe with clampsat 1.00 m spacing. This includes jointing of pipes & fittings with onestep CPVC solvent cement and the cost of cutting chases andmaking good the same including testing of joints complete as perdirection of Engineer in Charge. Concealed work including cutting chases and making good the walls etc., 25 mm nominal outer dia .Pipes. |
| 45 | Providing and fixing PTMT 15 mm Urinal spreader size 95x69x100mm with 1/2\" BSP thread and shapes. Weighing not less than 60gms. |
| 46 | Providng & fixing PTMT urinal cock of approved quality |
| 47 | Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350mm with white PVC automatic flushing cistern,with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass including painting of fittings and cutting and making good the walls and floors wherever required : Single half stall urinal with 5 litre P.V.C. automatic flushing cistern. |
| 48 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require :White Vitreous China Surgeon type wash basin of size 660x460 mm with a pair of 15 mm C.P. brass pillar taps with elbow operated levers. |
| 49 | Making connection of GI Pipedistribution branch with GI main of following size. A. 32mm |
| 50 | B. 40mm nominal boare |
| 51 | Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball.15 mm nominal bore, 105 mm long. Weighing not less than 138 gms. |
| 52 | Supplying and drawing FR PVC insulated & unsheathed flexible copper conductor ISI marked (IS:694) of 1.1 kV grade and approved make in existing surface or recessed conduit/casing capping including making connections etc. as required. A. 2 x 1.5mm |
| 53 | B. 2 x 2.5 sqmm |
| 54 | Providing and fixing double bearing capacitor celling fan of approved make complete with regulator 1400mm sweep. |
| 55 | Providing and fixing aluminium work for doors, windows, ventilatorsand partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically whereverrequired including cleat angle, Aluminium snap beading for glazing /panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing and panelling to be paid for separately) :For fixed portion. Powder coated aluminium (minimum thickness of powder coating 50 micron) |
| 56 | For shutters of doors, windows & ventilators including providing andfixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of PVC / neoprene gasket required (Fittings shall be paid for separately).Powder coated aluminium (minimum thickness of powder coating 50micron) |
| 57 | Providing and fixing 12mm thick Pre-laminated particle board flat pressed three layer or graded wood particle board conforming to IS:12823 Grade l Type ll, in panelling fixed in aluminium doors,windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side. |
| 58 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with PVC/ neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-incharge . (Cost of aluminium snap beading shall be paid in basicitem) With float glass panes of 5.50 mm thickness |
| 59 | Providing and fixing aluminium tubular handle bar 32 mm outer dia,3.0 mm thick & 2100 mm long with SS screws etc .complete as perdirection of Engineer-in-Charge. Anodized (AC 15 ) aluminium tubular handle bar |
| 60 | Providing and fixing 100mm brass locks (best make of approvedquality) for aluminium doors including necessary cutting and makinggood etc. complete. |
| 61 | Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2mm and braced with flat iron diagonals 20x5mm size with top and bottom rail of T-iron 40x40x6mm with 40mm dia,steel pulleys complete with bolts, nuts, locking arrangement,stoppers, handles, including applying a priming coat of approvedsteel primer. |
| 62 | Wiring of light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq. mm FR PVC insulated unsheathed flexible copper conductor 1.1 kV grade and 1.5 sq.mm FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade (IS:694) of approved make in surface / recessed ISI marked medium duty PVC conduit & it\"s accessories, round tiles,18 SWG M.S. box with earth terminal, screwless cage connectors for neutral looping in switch board & falce ceiling point, 6 A switch, 3.0 mm thick phenolic laminated sheet, zinc plated / brass screws, cup washers, making connections, testing etc. as required.(i) Short point (up to 3 mtr.) |
| 63 | (ii) Medium point (up to 6 mtr.) |
| 64 | (iii) Long point (up to 10 mtr..) |
| 65 | Supplying and drawing FR PVC insulated & unsheathed flexible copper conductor ISI marked (IS:694) of 1.1 kV grade and approved make in existing surface or recessed conduit/casing capping including making connections etc. as required.(l)1 x 1.5 sq.mm |
| 66 | (ll)1 x 2.5 sq.mm |
| 67 | (lll)2 x 2.5 sq.mm |
| 68 | (ll)2 x 4.0 sq.mm |
| 69 | Wiring of 3 pin 5 amp. light plug point with 1.5 sq. mm FR PVC insulated unsheathed flexible copper conductor 1.1 kV grade and 1.5 sq.mm FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade(IS:694) of approved make in surface / recessed ISI marked medium duty PVC conduit & it\"s accessories, 18 SWG M.S. box with earth terminal, screwless cage connectors for neutral looping in switch board & falce ceiling point, 6 A switch, 6 A socket, 3.0 mm thick phenolic laminated sheet, zinc plated / brass screws, cup washers, making connections, testing etc. as required. On board(I) Short point (up to 3 mtr.) |
| 70 | (II) Medium point (up to 6 mtr.) |
| 71 | (III) Long point (up to 10 mtr..) |
| 72 | Wiring of 3 pin 6 amp. Light plug point with 1.5 sq. mm FR PVC insulated unsheathed flexible copper conductor 1.1 kV grade and 1.5 sq.mm FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade(IS:694) of approved make in surface / recessed ISI marked steel conduit & it\"s accessories, 18 SWG M.S. box with earth terminal, screwless cage connectors for neutral looping in switch board & false ceiling point, 6 A switch, 6 A socket, 3.0 mm thick phenolic laminatedsheet, zinc plated / brass screws, cup washers, bushes, check nuts, making connections, testing etc. as required.(I) Short point (up to 3 mtr.) |
| 73 | (II) Medium point (up to 6 mtr.) |
| 74 | (III) Long point (up to 10 mtr..) |
| 75 | Wiring of 6 pin 15 amp. Light power point with 4.0 sq. mm PVC insulated unsheathed solid / stranded copper conductor 1.1 kV grade of approved make in surface / recessed ISI marked pvc conduit & it\"s accessories, 18SWG M.S. box with earth terminal, screwless cage connectors for neutral looping in switch board , 15 A switch, 15 A socket, 3.0 mm thick phenolic laminated sheet, zinc plated / brass screws, cup washers, bushes, check nuts, making connections, testing etc. as required.(I) Short point (up to 3 mtr.) |
| 76 | (II) Medium point (up to 6 mtr.) |
| 77 | (III) Long point (up to 10 mtr..) |
| 78 | P & F 18 SWG Sheet steel boxes duly finished with two coats of red oxide and with earthing terminal of following sizes (nominal size) on surface or in recessed as required.75mm x 75mm x 50mm |
| 79 | 150mm x 75mm x 60mm |
| 80 | 200mm x 250mm x 75mm |
| 81 | 250mm x 300mm x 75mm |
| 82 | P&F 240/415 V isolator conforming to IS:13947-III/ IEC 60947-3 on existing board / sheet including making connections with lugs, testing etc. as required. Triple pole Isolator. 63 Arating |
| 83 | P & F of IP20 LED batten type light fixture made from CRCA sheet stlle housing suitable for mounting LED tube system (integral driver), Power consumption of18W/36W, 1500/3000 lumens, system lumen efficiency 80 lm/ watt output, life time of 50000 burning hours with 70% initial lumen maintained. CCT 3000° K, 4000° Kand 6000° K. 4’ LED Tube shape fixture 18W/20w |
| 84 | Plate Earthing as per IS:3043 with G.I. Earth plate of size 600mmx600mm x 6.0mm by embodying 3 to 4 mtr. below the ground levelwith 20 mm dia. G.I. \"B\" class watering Pipe including all accessories like nut, bolts, reducer ,nipple, wire meshed funnel, and C.C. finished chamber covered with hinged type with locking arrangement C.I. Cover, C.I. Frame of size300mm x 300mm complete with alternate layers of salt and coke/ charcoal, testing of earth resistance as required. |
| 85 | P&F 240/415 V MCB of breaking capacity not less than 10 KA (B/ C/ D tripping charact- eristic) ISI marked IS 8828(1996)]/ confor- ming to IEC 60898 in existing board/sheets including making connections with lugs, testing etc. as required. Double pole MCB.(l) 6 A to 32 A rating |
| 86 | (ll) 40 A to 63 A rating |
| 87 | P&F Recessed/ Surface mounting heavy duty horizontaltype sheet steel Distribution board phophatised/ powder painted complete with copper bus bar, shorting link , neutral link, earth link and din bar, conforming to IS13032 & IS8623 including making internal DB terminations with copper lugs , testing etc. as required. Single door (Three phase) 12Way |
| 88 | P & F of IP20 LED Recessed/ Surface Mounted Round/ sqaure Non Dimmable Downlight with die-cast aluminum housing & Heat sink for heat dissipation, high purity reflector with external driver having efficiency > 85% and inompliance to IEC standards. ( supplied together with luminaire) Power consumptionof =<7w/10w/8w/12w/15w/18W with100/500/750/1100/1250 lumens, system lumen, efficeancy of 70 lm / Watt or 100 lm / Watt output suitable to replace 1x18W/ 2x18w/2x26w CFL downlights, life time of 50000 Burning Hours with 70% of intial Lumen maintained. CCT 3000° K, 4000° K and 6000° K. Fixture shall be CE Compliance. LED downlight 12/15/20 W(I) LED downlight 2/3 W |
| 89 | (Il) LED downlight 6/7 W |
| 90 | (Il) LED downlight 9/10W |
| 91 | (Il) LED downlight 14/15 W |
| 92 | (Il) LED downlight 18/20 W |
| 93 | Surface Mounting(lV) LED downlight 6/7 W |
| 94 | (lV) LED downlight 12/14 W |
| 95 | (lV) LED downlight 18/20 W |
| 96 | Providing & Fixing of IP40 LED Surface/ Recessed / suspended mounting Mid power SMD type LED Light fixture made from CRCA sheet steel housing, high purity / transmisivity UV stabilized Non -yellowish diffuser for uniform light distribution. High efficiency with 2.5 KV internal/external surge protection BIS certified isolated driver having efficiency > 85% , with Short & Open circuit protection and in compliance to IEC standards (Integral with light fixture). System lumen efficacy of ≥ 120 lm/Watt ,THD < 10 % , p.f.≥0.95,CRI >80 , life time of minimum 50000 Burning Hours with , 70% of intial Lumen maintaned till life ends , CCT 3000°K / 4000°K / 5700°K /6000°K/6500°K (As per ANSI Bin) , maximum power consumption should not more than the specified rating and Fixture shall be of BISstandard and trade mark certificate ( T.C.). Manufactures WordMark/ Name Engraved/ Embossing/ Screen printing on housing. OEM must have its own in house NABL lab setup for all testing facilities for LED fixtures. (LM79/LM80) certificate / Report from OEM shall be submitted. All as per pre approved by engineer in charge . foe additional technical parameters of product/ work, refer Annexure \"A\" attacheded with this BSR.36W LED light fixture 2\"x2\" with acrylic / prismatic front cover. |
| 97 | 48W LED light fixture 2\"x2\" with acrylic / prismatic front cover. |
| 98 | Providing & Fixing of IP 20 box made out from 1.2mm thick CRCAsheet steel with depth of minimun 30 mm and finished with powdercoating and suitable for mounting LED tube including side covers,holders , internal wiring to illuminate the single sided connectionLED tube. ( Without tube). All as per pre approved by Engineer incharge. For additional technical parameters of products/ work ,refer Annexure \"A\" attached with this BSRSuitable for 4\" LED Tube shape fixture 1 X 18/20 W |
| 99 | Suitable for 4\" LED Tube shape fixture 2 X 18/20 W |
| 100 | P/Laying P.V.C/XLPE insulated & P.V.C sheathed cable of 1.1 KV grade with Copper conductor of IS: 1554 P-I/IS: 7098 P-I of Group 1of approved make in ground as per IS: 1255 including excavation of 30cm x 75cm size trench, 25cm thick under layer of sand, second class bricks covering, refilling earth, compaction of earth, making necessary connection, testing etc. as required of size.(I) 36/40W LED Light 1’x4’ with acrylic/ prismatic front cover(I) 2.5sq mm. Armored 4 core |
| 101 | (Il)1.5 Sq.mm Armoured 6 Core |
| 102 | (Ill)1.5 Sq.mm Armoured 12 Core |
| 103 | Providing and fixing of fuse box size 250(H) x 200(W) x 150(D) mm with base shape accomodating the pole partly, fabricated of 1.6mm MS sheet with hinged cover, dust and vermin proof, rubber gasket, locking arrangement, duly holded with 2 nos pole clamps of 25mm x 3mm flat with nut and bolts, complete with anticorrosive treatment,finished with two coat of approved enamel paint. The box shall be provided with 2/ 4 nos copper bus bar 150 x 20 x 3mm with brassscrews suitable supports,earth terminal, inter connection, brass cable gland upto 10 Sqmm size cable, 2nos 16 Amp kitkat fusecomplete in all respect. |
| 104 | P & F double ball bearing capacitor start ceiling fan of approved make complete with regulator and other accessories as required. (for estimation purpose only). 1400 mm sweep |
| 105 | 5 step fan regulator |
| 106 | P&F of capacitor start single phase metallic blade fresh air fan, in existing opening including cost of hardware , flexible copper conductor ,making connections, testingetc. as required. 225 mm sweep |
| 107 | P&F 240/415 V isolator conforming to IS:13947-III/ IEC 60947-3 on existing board / sheet including making connections with lugs , testing etc. as required.Four pole Isolator 63 A rating |
| 108 | P & F office one module call bell system comprising of indicator, push to reset switch housed in pvc/metallic sheet including making connection testing etc. as required |
| 109 | P & F ISI marked single tone electronic call bell including making connection testing etc. as required. |
| 110 | P & F of 3.00mm PVC sheet for fan box with help of screws, cup washer as required |
| 111 | Labour charges for removing and refixing of Ceiling fan/ Exaust fanfrom site |
| 112 | Charges for oiling, greasing, overhauling of ceiling fan, table fan, pedestal fan irrespect to the size of fan including removing,refixing offan from site and testing etc. as required. |
| 113 | Labour charges for dismantling of surface PVC/ Steel conduit including wiring in conduit, conduit fittings and depositing the same with listing of material in store. |
| 114 | Labour charges for dismantling of surface/ recessed switch board of any size and depositing the same with listing of material in store. |
| 115 | Labour charges for dismantling of wiring in existing conduit of following size and depositing the same with listing of material instore.(l) up to 2.5 sq. mm. wire |
| 116 | (ll) 4/ 6 sq. mm. wire |
| 117 | Supply , Drawing and Testing of 4 pair , 100 ohm, 24 AWG UTP E Cat 5 Cable as per latest ammendments of TIA /EIA 568 B.2 Specifications in existing MS/PVC Conduits including making connections to Informationoutlets and Patch Panels with ferruling at both ends for identification with necessorry tools for punching, stripping, crimpping and testing required . |
| 118 | Supply and Installation of Information outlets made of high impact plastic bodyABS FR Grade with spring loaded collapsible shutters in jack Recess, suitable for Ecat 5 application complying to latest ammendments EIA/ TIA 568 B.2 specifications in existing modular /MSBoxes along with necessory connections as required. I/O\"s to have Terminator caps for toolless termination Single Outlet |
| 119 | Supply Installation, Testing and Comissioning of Rack mounted 19\", ECat 5 UTP,1.5-1.6 MM CRS chasis , powder coated Modular Patch Panels (upgradable tointelligent panels with use of sensor strips) with collapsible shutters on jacks to support latest ammendments of TIA / EIA ECat 5 Specifications in Existing Communication Rack along with necessory connections of ECat 5 UTP Cables, With Rear Cable management trays and clamps.12 Ports |
| 120 | P & F following size mounting grid plates with cover plates(I) 1/2 Module |
| 121 | (ll) 3 Module |
| 122 | (llI) 4 Module |
| 123 | (lV) 5 Module |
| 124 | (V) 6 Module |
| 125 | (VI) 8 Module |
| 126 | (VII) 16- 18 Module |
| 127 | Providing and fixing Mild steel railing including painted, complete as per drawing and technical specification and as per clause 1900 & 2703.2 of MoRT&H Specification including all material, labour, machinary etc. |
| 128 | Stone work ( machine cut edges) for wall lining upto 10 m height etc. (Veneer work) backing filled with a grout of 12mm thick cement mortar 1:3 (1 Cement : 3 coarse sand) and jointed with Cement mortar 1:2 (1 cement : 2 stone dust) including rubbing and polishing complete. (To be secured to the backing by means of cramps whichshall be paid for separately)Kota stone slabs exposed face dressed and rubbed.25 mm thick. |
| 129 | Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - All work upto plinth level :1:4:8 (1 Cement : 4 fine/ coarse sand : 8 graded stone aggregate 40mm nominal size). |
| 130 | 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 131 | Providing and fixing of precast concrete interlocking tiles of desired shape of M 30 grade manufactured from fully computerized automatic stationery hydraulic viebro pressed machine and fully computerized automatic batching plant of class A1/A2 as per BS 6717:2001. The CC interlocking paving blocks be laid on average 50mm. thick bed of coarse sand and the joint is to be filled with fine sand. Laying procedure on compacted sub-base as defined. Complete job is to be executed as per the instruction of Engineer incharge. The rates to be inclusive of all lead & Lifts etc. complete asper specifications. Tensile splitting strength, abrasion and brakingload etc. as per BS 6717:2001, Grey cement.60mm thick |
| 132 | 80mm thick |
| 133 | 100mm thick |
| 134 | Flooring with Cobble stone of approx. Size 125x125x75 mm (thick) laid on 25 mm average thick cement mortar 1:3 ( 1 cement : 3 Coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the stone, laid in approved pattern complete in all respect as per direction of Engineer-in-charge. |
| 135 | Supplying and stacking good earth at site of work.Note: 1) Loading, unloading and carriage to be paid extra as peractual lead.2) Earth measured in stacks will be reduced by 20% foe payment |
| 136 | Carriage of Materials by mechanical transport including loading, unloading and stacking :: upto 3 km Earth |
| 137 | Wall painting with plastic emulsion paint of approved brand andmanufacture to give an even shade:Two or more coats on new work |
| 138 | Dressing of earth work in surface excavation including cutting andfilling upto 30cm depth including disposal of excavated earth upto50m and lift upto 1.5 m. |
| 139 | Earth work in excavation for roadway, including trimming bottom and side slopes in accordance with requirement of line, grades and cross sections, including disposal of surplus material with all lift and lead upto 1000 metre as per MoRT&H specification clause 301In all type of soil |
| 140 | Earth work in excavation for roadway, including trimming bottom and side slopes in accordance with requirement of line, grades and cross sections, including disposal of surplus material with all lift and lead upto 1000 metre as per MoRT&H specification clause 301In Ordinary rock |
| 141 | Providing and laying cast-in-situ cement concrete M-20 grade kerb stone channel top and bottom width 115 and 165 mm respectively, 250mm high laid with kerb laying machine, on 150 mm thick PCC M- 10 grade foundation (laid manually) as per design, including fixing at site as per clause 408 of MoRT&H Specification including all material, labour, machinery, lighting, guarding and maintenance of iversion.Using Concrete Mixer |
| 142 | Brick on edge flooring with bricks of class designation 75 including cement slurry etc. complete in cement mortar:1:4 (1 cement : 4 coarse sand) |
| 143 | Chequered terrazo tiles 22 mm thick with graded marble chips of size up to 6 mm in floors jointed with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing complete on 20 mm thick bed of cement mortar 1:4 (1cement :4 coarse sand) :Light shade using white cement. |
| 144 | Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard jointed with neat cement slurry mixed with pigment to match the shade of tiles including rubbing and cleaning etc. complete on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand).Medium shade using 50% white cement 50% Grey cement. |
| 145 | Random rubble dry stone Kharanja (soling) under floor. |
| 146 | Providing and laying of skirting 89 mm wide having both sidelaminations with moulding in upper side with matching of floor fixingwith nails and screws & fevicol complete in all respect as perdirection of EI. |
| 147 | Providing and fixing fine dressed \" marble stone flooring \" with white lime stone (raj nagar stone) machine cut of approved shade set in pattern over 20mm thick base of cement mortar 1:3 including jointing finished flush with white cement and stone powder with an admixture of pigment as per direction of Engineer incharge. (50-75mm thick) |
| 148 | Grassing with \"Carpet\" grass (selection no. 1) including watering and main tenance of the lawn for 30 days or more till the grass forms a thick lawn free from weeds and fit for moving including supplying good earth if needed.(The good earth shall be paid separately) In rows 5 cm apart in either direction |
| 149 | Supply at site of work well decayed farm yard manure, from anyavailable source, approved by the engineer in charge includingscreening and stacking |
| 150 | Trenching in specified soil upto a depth of 60 cm. including removaland stacking of serviceable materials and then disposal byspreading and neatly leveling within a lead of 50 metres and makingup the trenched area to proper levels by filling with earth or earthmixed with sludge or/and farm-yard manure before and after floodingwith water (excluding cost of imported earth and sludge or farm-yardmanure). |
| 151 | Uprooting rank vegetation and weeds by digging the area to a depthof 60 cm removing all weeds and other growth with roots by forkingrepeatedly, breaking, clods, rough dressing, flooding with water,uprooting fresh growth after 10 to 15 days and then fine dressing forplanting new grass, including disposal of all rubbish with all leadsand lifts. |
| 152 | Turfing slopes of new banks with rough grassing includingpreparation of ground by loosening soil with kassi, flooding withwater, rough dressing, fine dressing, supplying and spreading farm yard manure at the rate of 0.18 cum per 100 sqm and supplying and planting doob grass roots at 15 cm apart, complete.Of Old banks |
| 153 | Planting permanent hedges including digging of trenches, 60 cmwide and 45 cm deep, refilling the excavated earth mixed withfarmyard manure, supplied at the rate of 4.65 cum per 100 metres and supplying and planting hedge plants at 30 cm apart |
| 154 | Making tree guard 53 cm dia and 1.3 m high as per design fromempty bitumen drum, slit suitably to permit sun and air, (supplied bythe department at stock issue rate) including providing and fixing2 nos MS sheet rings 50 x 0.5 mm with rivets, complete in allrespect. |
| 155 | Providing and fixing MS iron tree guard 60 cm dia and 2 metre high above ground level formed of 4 Nos (25 x 6 mm) and 8 Nos (25 x 3 mm) vertical MS riveted to 3 Nos (25 x 6 mm) iron rings in two halves, bolted together with 8 mm dia and 30 mm long bolts including painting two coats with paint of approved brand over a coat of priming, complete in all respects |
| 156 | Supply and planting following in poly bags / earthen pots wellbranched, well established & free from disease of 300 mm min.height ground covers at site in 0.3 m dia holes, 0.3 m deep dug inthe ground, mixing the soil with decayed farm yard/sludge manure,backfilling the hole watering etc as required.Wedelia trilobata ( SunFlower Family) |
| 157 | Asparagus myerii (Fox Tail) |
| 158 | Lantana sellowiana |
| 159 | Golden duranta |
| 160 | Pennisetum setaceum (Fountain Grass) |
| 161 | Supply and planting following in poly bags / earthen pots wellbranched, well established & free from disease of 900 mm min.height plants at site in 0.60 m dia holes, 1 m deep dug in theground, mixing the soil with decayed farm yard/sludge manure,backfilling the hole watering etc as required.Ficus panda |
| 162 | Tabernaemontana variegated ( Chandni) |
| 163 | Hibiscus variegated ( Guddal) |
| 164 | Supply and planting following in poly bags / earthen pots wellbranched, well established & free from disease of 600 mm min.height shurbs at site in 0.45 m dia holes, 0.45 m deep dug in theground, mixing the soil with decayed farm yard/sludge manure,backfilling the hole watering etc as required.Rhaphis excelsa with 3-4 suckers ( Lady Palm) |
| 165 | Agave with 10-12 leaves (Kamal Cactus) |
| 166 | Phonenix sylvertris ( Date Palm) |
| 167 | Supply and planting following species best quality container grown healthy trees of 2 mt. min. height, well established & free from disease at site in 0.90 m dia holes, 1 m deep dug in the ground, mixing the soil with decayed farm yard/sludge manure, backfilling the hole watering etc as required. |
| 168 | Gulmohar(Delonix regia) |
| 169 | Jacaranda mimosifolia (Neelli Gulmohar) |
| 170 | Erythrina variegata (Lantern Tree) |
| 171 | Bougain villea |
| 172 | Supply and planting following species best quality container grownhealthy trees of 3 mt. min. height, well established & free fromdisease at site in 1.20 m dia holes, 1.20 m deep dug in the ground,mixing the soil with decayed farm yard/sludge manure, backfillingthe hole watering etc as required.Plumeria alba ( Champa) 3 M height minimum |
| 173 | Gulmohar(Delonix regia) |
| 174 | Neem(Azadirachta indica) |
| 175 | Erythrina variegata (Lantern Tree) |
| 176 | Construction of Tube-well upto 100 Meter depth and above in alltype of rocks by DTH system and over burden to accommodatecasing pipe of following sizes in all types of soils and over burden including lowering of casing pipes but excluding cost of casing pipesas per IS : 2800 (Part I & II) 1979 specifications. The work would be completed after obtaining sand free water. The tube well should have a throughout bore as per nominal dia of casing pipe:200 mm dia Nominal bore |
| 177 | Supply of strainer pipes made of ERW M.S. black pipe ISI mark of following sizes at the site of work including required size of slotting as per IS:8110-1985 of following nominal bore sizes at site of work. 200 mm dia |
| 178 | Providing & Fixing of Single Stage, water cooled, High Speed(2880RPM), Horizontal, Centrifugal, Openwell Submersible pumps set prefilled with coolent water and fitted with mechanical seal - T/C Vs T/C,Thrust bearing shall be of carbon + S.S.The stator body of singlephase pump shall be of SS and rest of all shall be of cast iron. Allcasting parts should be cathod electro deposition (CED) coated andother construction material should be confirming to IS : 14220: 2018. The overall performance of pump shall confirm to BEE energyefficiency level of 3 star. Valid BEE certificate from OEM must besubmitted for the same. Motor should be IE2 class as per IEC60034-2-1: 2007, IEC 60034-30: 2008, & IS12615:2011, includingmaking connection etc as required complete in all respect. All as perpre approved by Engineer in charge. For additional technicalparameters of products/ work , refer Annexure \"A\" attached withthis BSR .3.0 HP, 1-Ø, (40 -170)Mtr, (60- 20) LPM |
| 179 | 150 mm diameter Submersible pump shall have following HPRating, phase, Head range, Discharge range respectively.3.0 HP, 3-Ø, (54 -95)Mtr, (250-50) LPM |
| 180 | Supply and fixing of tube well cover of M.S. sheet (6mm thick) withnuts and bolts complete for casing size:200 mm dia |
| 181 | Providing, lowering, laying & jointing MDPE/ HDPE pipes (Class-PE 80) PN 12.5 composite pipes for extra length for house service connections as per drawing and specifications complete including all material, labour, testing and commissioning as per Technical Specifications and as per direction of Engineer. With HDPE pipe32 mm dia service pipe |
| 182 | Supply and fixing of M.S. clamp set of 50 ×6mm flat iron with nutsand bolts etc. for holding the riser pipe assembly of submersiblepump set. |
| 183 | Providing and fixing Granite stone slab mirror polished and machine edge cut in walls, pillars, steps, Shelves, Sills Counters, Floors etc. laid on 12mm (Av.) thick base of cement mortar 1:3 (1 cement : 3 coarse sand) jointing with white cement mortar 1:2 (1white cement : 2 marble dust) with pigment to match the shade of the marble slab including grinding, rubbing and polishing complete. Green / Black Above 3601 Cm2 Slabs |
| 184 | Providing and fixing at all height false ceiling including providing andfixing of frame work made of special sections power pressed fromM.S. sheet and galvanised in accordance with zinc coating of grade350 as per IS : 277 and consisting of angle cleats of size 25mm widex 1.6mm thick with flanges of 22mm and 37mm at 1200mm centre tocentre one flange fixed to the ceiling with dash fastener 12.5mmdiax40mm long with 6mm dia bolts to the angle hangers of25x25x0.55mm of required length, and other end of angle hangerbeing fixed with nut and bolts to G.I. channels 45x15x0.9mm runningat the rate of 1200mm centre to centre to which the ceiling section0.5mm thick button wedge of 80mm with tapered flanges of 26mmeach having clips of 10.5mm at 450mm centre to centre shall befixed in a direction perpendicular to G.I. channel with connectingclips made out of 2.64mm diax230mm long G.I. wire at everyjunction including fixing the gypsum board with ceiling section andperimeter channels 0.5mm thick 27mm high having flanges of 20mmand 30mm long, the perimeter of ceiling fixed to wall/partition withthe help of rawl plugs at 450mm centre to centre with 25mm longdrive-all screws @ 230mm interval including jointing and fixing to a flush finish of tapered and square edges of the board withrecommended filler, jointing tapes, finisher and two coats of primersuitable for board as per manufactures specification and alsoincluding the cost of making openings for light fittings, grills,diffusers, cutouts made with frame of perimeter channels suitablyfixed all complete as per drawing and specification and direction ofthe Engineer in Charge but excluding the cost of painting with :12.5 mm thick tapered edge gypsum board conforming to IS: 2095-Part I, |
| 185 | Providing & fixing UV stabilised fibreglass reinforced plastic sheetroofing upto any pitch including fixing with polymer coated \"J\" or \"L\"hooks, bolts & nuts 8mm dia. G.I plain/bitumen washers completebut excluding the cost of purlins, rafters, trusses etc. The sheetsshall be manufactured out of 2400 TEX panel rovigs incorporatingminimum 0.3% Ultra-violet stabiliser in resin system underapproximately 2400 psi and hot cured. They shall be of uniformpigmentation and thickness without air pockets and shall conform toIS 10192 and IS 12866.The sheets shall be opaque or translucent,clear or pigmented, textured or smooth as specified2mm thick flat. |
| 186 | Supply , Installation, Testing and Comissioning of ducting made fromaluminium sheet metal fabricated as per IS:655 with minimumgalvanising coating not less then 100 GSM and as per approveddrawings & designs including the cost of hangers, supports , angle ,expansion fasteners , closed cell neoprene gasket T&P etc. asrequired of following gauge:- All as per pre approved by Engineer incharge. For additional technical parameters of products/ work ,refer Annexure \"A\" attached with this BSR .1.20mm |
| 187 | SITC of ISO certified company made air cooled ducted split typeair conditioning machine with each having a capacity and details asmentioned below suitable for operation on R-32/R-410A R-407Green refrigerant comprising of single/twin Scroll / Rotary /Reciprocating type compressor hermatically sealed complete withautomatic capacity, safety switches, lubrication system,with min 5year OEM warranty both compressor and PCB , Suitable capacitysquirrel cage induction motor with class \"B\" insulation suitable foroperation on 415 + 10% volts, 50 Hz, A.C. supply for Blower motor,Necessary drive arrangement for blower motor, Matching Air cooledcondenser with necessary fittings for refrigerant piping connections,necessary structural support for mounting condensers,Microprocessor based control panel complete with accessories,machine isolation / disconnect switch, valves and accessories tointer conne ct compressor and condender including pressure testing,vacuum. Necessary starters suitable for Indoor & outdoor unitcomplete with O/L , U/V, phase reversal protection, single phasepreventors etc complete as required.NABL accredeated as per IS/ISO/IEC 17025 standards / CPRI/ERDA lab testing reports as per IS 1391 with OEM certificate mustsubmitted to engineer in charge. All as per pre approved byEngineer in charge. All as per pre approved by Engineer in charge.For additional technical parameters of products/ work , referAnnexure \"A\" attached with this BSR .5.5 TR |
| 188 | Providing and laying lean cement concrete 1:4:8 in Sub- base over a preparedsub-grade withcoarseandfineaggregateconformingto IS:383,thesizeofcoarseaggregatenotexceeding25mm, aggregatecementrationottoexceed15:1,aggregategradation afterblendingtobeaspertable600-1,cementcontentnottobe lessthan 150 kg/ cum, optimum moisture contentto be determined during trial length construction, concrete strength not to be less than 10 Mpa at 7 days, mixed in a batching plant, transported to site, laid withapaverwithelectronicsensor,compactingwith8-10tonnes vibratory roller, finishing and curing complete as per clause 601, 112 of MoRT&H specificationincludingall material,labour, machinery, lighting, guarding and maintenance of diversion. ( Using 20 mm aggregate size) |
| 189 | Providing and laying un-reinforced, dowel jointed, plain cementconcrete mix in pavement over a prepared sub base with 43 gradecement, coarse and fine aggregate conforming to IS: 383, maximumsize of coarse aggregate not exceeding 25 mm, mixed in a batchingand mixing plant as per approved mix design, transported to site,laid with a fixed form or slip form paver, spread, compacted andfinished in a continuous operation including provision of contraction,expansion, construction and longitudinal joints, joint filler, separationmembrane, sealant primer, joint sealant, debonding strip, dowel bar,tie rod, admixtures as approved, curing compound, finishing to linesand grades complete as per drawing and as per clause 602, 112 ofMoRT&H specification including all material, labour, machinery,lighting, guarding and maintenance of diversion. PCC-M20 |
| 190 | Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring, shuttering, finishing and reinforcement - All work upto plinth level :1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20mm nominal size) |
| 191 | Supplying and Laying ISI marked P.V.C. insulated submersiblecable as per PWD specification for electrical Works confirming toIS:694 and as per IS 8130 : 2013 of 1.1 kV grade .Wire should be made from 99.99% purity copper, class 5 stranding in acc. to IEC 60228 for lower watt loss , oxygen free ( <10 ppm) for less chances of oxidization and higher silver content for gives better conductivity, insulation PVC type A or C ,flame retardant as per IS 10810-53,better amperage rating as per VDE 0298 part 4 including making connection etc. as required. OEM Must have its own in house NABL lab setup for all testing facilities for wires. All as per pre approved by Engineer in charge, making connections. For additional technical parameters of products/ work , refer Annexure \"A\" attached with this BSR4.0 Sq.mm 3 core flat / Round |
| 192 | Providing and fixing of precast concrete interlocking tiles of desired hape of M 30 grade manufactured from fully computerized automatic stationery hydraulic viebro pressed machine and fully computerized automatic batching plant of class A1/A2 as per BS 6717:2001. The CC interlocking paving blocks be laid on average 50mm. thick bed of coarse sand and the joint is to be filled with fine sand. Laying procedure on compacted sub-base as defined. Complete job is to be executed as per the instruction of Engineer incharge. The rates to be inclusive of all lead & Lifts etc. complete as per specifications. Tensile splitting strength, abrasion and braking load etc. as per BS 6717:2001, Grey cement.80mm thick |
| 193 | Providing at site, lowering & laying in trenches, aligning & jointing of PVC-U pipes (SN 8) as per IS 15328 (amended up to date) and as per specifications with rubber rings with socket and spigot joint, (EPDM/SBR) for all depths for pipe length as per drawing and specification including hydraulic field testing (including the cost and conveyance of water to site for testing) and commissioning etc complete as directed by Engineer.Note : E/w to be measured and paid separately. B160 mm Nominal Dia |
| 194 | 200 mm Nominal Dia |
| 195 | 250 mm Nominal Dia |
| 196 | Centring and shuttering with plywood or steel sheet upto two stories or height upto 7.5 metre above plinth level including strutting, propping etc. and removal of form for :Suspended floors, roofs, landings, balconies and access platform. |
| 197 | Providing, laying and spreading of granular sub-base by providing coarse graded Material (Table 400-2), spreading in uniform layers with motor grader on prepared surface, mixing BY MIX IN PLACE METHOD with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete as per MoRT&H specification clause - 401 including all material, labour, machinery,lighting, guarding and maintenance of diversion Grading - III Material |
| 198 | Providing and fixing on wall face Unplasticised - PVC moulded fittings/ accessories for Unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion.Single tee without door 110x110x110 mm |
| 199 | Bend 87.5°110 mm bend |
| 200 | Providing and fixing stone slab covering of required size over drainsincluding filling of joints with cement sand mortar 1:3 complete asper direction of Engineer-in-charge.Average thickness 60 to 75 mm |
| 201 | Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard jointed with neat cement slurry mixed with pigment to match the shade of tiles including rubbing and cleaning etc. complete on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand).Medium shade using 50% white cement 50% Grey cement. |
| 202 | Providing and fixing of reinforced Ferro-Cement drain coversdesigned for \"AA\" class loading duly marked on cover with adequatesteel reinforcement having thickness 75mm to 150mm anti corrosivebitumen painted M.S. plate , Rim and M.S. lifting hooks, Admixtureslike plasticizer, bond improving compound, shrinkage, resistancecompound, abrasion resistant complete as per approved design etcStandard Size 600x800mm (75mm thick) for span 300 to 450mm |
| 203 | Standard Size 1000x800mm (100mm thick) for span 451 to 700mm |
| 204 | Standard Size 1500x600mm (125mm thick) for span 701 to 1200mm |
| 205 | Standard Size 2100x500mm (150mm thick) for span 1201 to1500mm |
| 206 | Providing at site, lowering & laying in trenches, aligning & jointing of RCC pipes NP3 class (with s/s ends) IS: 458 - 1988 (amended up to date) marked and pipes from 300 mm upto 2000 mm manufactured through vertical casting process all levels with Rubber gaskets (EPDM/SBR) for sewer lines as per IS: 5382 (including cost of Rubber gaskets lubricants) as per drawing, sectional hydro testing of the sewer pipe line (including cost and conveyance of water to site for testing) etc., complete as directed by Engineer Note : E/w to be measured and paid separately 600 mm internal diameter |
| 207 | 200 mm internal diameter |
| 208 | 300 mm internal diameter |
| 209 | 400 mm internal diameter |
AI Tender Summary
Tender Timeline
Aug 13, 2024
11:30 IST
Tender Published
Tender notice published.
CompletedAug 22, 2024
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedAug 23, 2024
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender