Tender For Providing Fire And Electrical Safety Measures As Per National Safety Councils Safety Audit Recommendations At J J Hospital Campus Buildings Byculla Mumbai, Mumbai-Maharashtra

TDR : 44674658

Tender Notice
BOQ

Expired

Mumbai , Maharashtra

Tender Brief : Tender For Providing Fire And Electrical Safety Measures As Per National Safety Councils Safety Audit Recommendations At J J Hospital Campus Buildings Byculla Mumbai

Document Fees
₹ 3540 /-

EMD
₹ 1997736.0 /-

Tender Value
₹ 39.95 Crore /-

Submission Date
23-08-2024

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !


1	Supplying and erecting PVC trunking (PVC casing-n-capping)ofsize25 mm with accessorieson wall/ceiling as per specification No: WG-MA/CON.
2	Supplying and erectingHMS PVC conduit FRLS grade 25 mm dia. with necessary accessories in wall/floor with chiselling appropriately as per specification No: WG- MA/CC.
3	Supplying and erecting mains with 2x4 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specificationNo: WG-MA/BW
4	Supplying and erecting mains with 1x4 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW
5	Supplying and erecting mains with 2x1.5 sq.mm FRLSHcopperPVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW
6	Supplying and erecting mains with 1x1.5 sq.mm FRLSHcopperPVC insulated wire laid in provided conduit/trunking/insidepole/Bus bars or any other places as per specification No: WG-MA/BW
7	Supplying and erecting mains with 2x2.5 sq.mmFRLSH copper PVC insulated wire laid in provided conduit/trunking/insidepole/Bus bars or any other places. as per specification No: WG-MA/BW
8	Supplying and erecting mains with 1x2.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW
9	Point wiring for light/fan/bell in 20 mm FRLS grade HMS PVC conduit with 1.5 sq.mm (2+1E) FRLSH grade copper wire with flush type switch and required accessories as per specification No: WG-PW/SW
10	Point wiring for light/bell/exhaust fan in 20 mm FRLS grade HMS PVC conduit with 1.5 sq.mm (2+1E) FRLSH grade copper wire, modular type switch, earthingand requiredaccessories as per specification No: WG- PW/SW.
11	Point wiring for independent plug in 20 mm FRLS grade HMS PVC conduit with 1.5 sq.mm (2+1E ) FRLSH grade copper wire, modular type switch, earthing and required accessories as per specification No: WG- PW/SW
12	Supplying and erecting single pole and neutral distributionboard (SPNDB), with 2 ways for incoming and 6 ways (6 poles) for outgoing SP MCBs, with door, 1.2mm thickness surface / flush mounted, IP 43 Protection on iron / GI frame as per specification no. SW-SWR/MCBDB
13	Supplying & erecting inverter LED batten 20W tube light fitting with polycarbonate housing, heat sink, integrated HF electronic driver, Min. 2600 mAhLithium ion Battery with charging time of 8-10 Hours and backup time of Min. 3 hrs. with minimum 25% of initial Watts having luminous efficacy of 100 lumen/watt, CRI>80, CCT of 6500K and THD<=20% having useful life of minimum 25000 hrs. with overheating protection with 2 years warranty.
14	Supplying and erecting fresh air cum exhaust fan of light duty 250 V A.C. 50 cycles 300mm. 1400 RPM rust proof body & blades, wire mesh, duly erected, complete.
15	Supplying and erectingmodular type switch 16Aduly erected on provided plate and boxwith wiring connections complete.
16	Supplying and erectingmodular type 3 pin 6 / 16A multi socket with safety shutter, duly erected on provided plate and box with wiring connections complete.
17	Supplying and erecting PVC Surface modular switch box with double mounting plate for 3 module duly erected.
18	Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 95sq. mm. aluminium conductor completeerected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipeas per specification no. CB-LT/AL
19	Supplying, erecting &terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½ core 300 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipeas per specification no. CB-LT/AL(mainincoming cable to main fire panel).
20	Supplying, erecting& terminatingFR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 4 sq.mm. copperconductor completeerected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipeas per specification no. CB-LT/CU(for booster Pump)
21	Supplying, erecting& terminatingFR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 6 sq. mm. copperconductor completeerected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipeas per specification no. CB-LT/CU
22	Supplying & laying (including excavation) reinforced cement concrete pipe of IS 458:2003 NP-2 class of 150 mm internal diameter in proper line, level and slope including providing and fixing collars in cement mortar 1:2 and curing etc. complete.
23	Providing & erecting 3 Pole MCCB 415V, 400A, rated short-circuit breaking capacity 36 kA (Ics=100% of Icu), adjustable thermal (overload) setting and adjustable magnetic setting with provided leads, provision for installation of shunt/ UV/ trip alarm contact and MCCB should have phase barriers both sides, with insulation withstand capacity 800V, no line-load bias in provided enclosure /panel as per specification no. SW- SWR/MCCB. Note : For use of 4 pole MCCBs in place of 3 pole MCCBs add 20% in rate of 3 pole MCCB. Hence 18563 X 20%= 3712.60/-
24	Supplying and laying (including excavation of suitable width & depth up to 90 cm) 146 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete.
25	Providing & erecting hot dipped galvanised ladder type cable tray manufactured from 16 SWG (1.6 mm thick) GI sheet of 150 mm width & 100 mm height comprising all required standard accessories.
26	Providing & erecting hot dipped galvanised ladder type cable traymanufactured from 16 SWG (1.6 mm thick) GI sheet of 300 mm width & 100 mm height comprising all required standard accessories.
27	Providing & erecting hot dipped galvanised ladder type cable traymanufactured from 16 SWG (1.6 mm thick) GI sheet of 400 mm width & 100 mm height comprising all required standard accessories.
28	Providing earthing with galvanized iron earth plate size 60 x 60 x 0.6 cm complete with all materials, testing & recording the results as per specification no. EA-EP (earthig schedule: 2 nos for each 2 nos main fire pump for hydrant and sprinkler , 2nos for each 2 nos jockey pump for sprinkler and hydrant , 1 nos for main fire panel and 1 nos for disel engine pump).= total 6 nos of earthing.
29	Supplying and erecting GI strip of required size used for earthing on wall and/or any otherpurpose with necessary GI clampsfixed on wall painted with bituminous paint in an approved manner with joints required. As per specification no EA-EP.(25x5) (1kg/m x 60 m=60 kg)
30	Supplying, installation, testing and commissioning ofmain fire pump(MFP / EP) suitable for water discharge of 2280 to 2850 LPM at 120 to 90 m head driven by electric motor 415 volts, 3 phase 50 Hz, AC supply of 75kW or of suitable kW capacity for manual/automatic operation and consisting of following :(a) Horizontal type, single stage, centrifugal/split casing pump of cast iron body & bronze impeller with stainless steel shaft(SS410 grade), mechanical seal conforming to IS 1520.(b) Squirrel cage induction motor, TEFC, synchronous speed 3000 RPM, suitable for operation with IP 55 protection for enclosure, horizontal foot mounted type with Class-\"F\" insulation, conforming to IS-325.(c) M.S. fabricated common base plate, coupling, coupling guard, foundation bolts etc. as required.(d) Erected on provided suitable size cement concrete foundation duly plastered with anti vibration pads with perfect aligning, proper levellingcomplete pump set with accessories duly painted with two coats of synthetic enamel paint of fire red colour over a coat of primer (ISC code 536 as per IS 2932 of 2003) complete, asper specification no. FF- MFP/SSC/EP
31	Supplying, installation, testing and commissioning of jockey fire pump (JP) suitable for water discharge of 180 to 240 LPM at 110 to 90 m head driven by electric motor415 volts, 3 phase 50 Hz, AC supply of 11 kW or of suitable kW capacity for manual/automatic operation and consisting of following :(a) Horizontal/vertical type, multi stage, centrifugal casing pump of cast iron body & bronze impeller with stainless steel shaft (SS410 grade), mechanical seal conforming to IS 1520.(b) Squirrel cage induction motor, TEFC, synchronous speed 3000 RPM, suitable for operation with IP 55 protection for enclosure, horizontal foot mounted type with Class-\"F\" insulation, conforming to IS-325.(c) M.S. fabricated common base plate, coupling, coupling guard, foundation bolts etc. as required.(d) Erected on provided suitable size cement concrete foundation duly plastered with anti vibration pads with perfect aligning, proper levelling complete pump set with accessories duly painted with two coats of synthetic enamel paint of fire red colour over a coat of primer (ISC code 536 as per IS 2932 of 2003) complete, asper specification no. FF-MFP/JP
32	Supplying, installation, testing and commissioning of booster fire pump [BP] suitable for water discharge of 900 LPM at 35 m head driven by electric motor 415 volts, 3 phase 50 Hz, AC supply of 7.5 kW or of suitable kW capacity for manual/automatic operation and consisting of following :(a) Horizontal/vertical type, single/multi stage, centrifugal casing pump of cast iron body & bronze/CI impeller with stainless steel shaft (SS410 grade), mechanical seal conforming to IS 1520.(b) Squirrel cage induction motor, TEFC, synchronous speed 3000 RPM, suitable for operation on with IP 55 protection for enclosure, horizontal foot mounted type with Class-\"F\" insulation, conforming to IS-325.(c) M.S. fabricated common base plate, coupling, coupling guard, foundation bolts etc. as required.(d)Erected on provided suitable size cement concrete foundation duly plastered with anti vibration pads with perfect aligning, proper levelling complete pump set with accessories duly painted with two coats of synthetic enamel paint of fire red colour over a coat ofprimer (ISC code 536 as per IS 2932 of 2003) complete, as per specification no. FF-MFP/BP
33	Supplying, installation, testing and commissioning of main fire pump (MFP/DP) suitable for water discharge of 2280 to 2850 LPM at 120 to 90 m head driven by 110 HP or suitable HP capacity diesel engine at required working speed suitable for automatic operation and consisting of following :(a) Horizontal type, single stage, centrifugal casing pump of cast iron body & bronze impeller with stainless steel shaft(SS410 grade), mechanical seal conforming to IS 1520.(b) Water cooled with radiator, diesel engine conforming to relevant IS standard complete with auto starting mechanism, 12/24 volts DC electric starting equipment with battery of required AH capacity with necessary charger suitable to work on 230v, 50Hz AC supply, diesel tank of minimum 150ltr capacity with first filling of diesel up to 100% level with necessary piping with valves up to engine , exhaust pipe extended up to 10 m outside pump house duly insulated with 50 mm thick glass wool with 1.0 mm thick aluminium sheet cladding, residential silencer, instruments and protection as per standard specification, stop solenoid for auto stop in the event of fault with audio indications etc. as required.(c) M.S. fabricated common base plate, coupling, coupling guard, foundation bolts etc. as required. (d) Erected on provided suitable size cement concrete foundation duly plastered with anti vibration pads with perfect aligning, proper levelling complete pump set with engine assembly and accessories duly painted with two coats of synthetic enamel paint of fire red colour over a coat of primer (ISC code 536 as per IS 2932 of 2003) complete, as per specification no. FF-MFP/SSC/DP
34	Supplying, erecting, testing & commissioning of fire pump control panel (FCP) of cubical construction, floor mounted type, fabricated from minimum 2 mm thick CRCA sheet, compartmentalised with hinged lockable doors, with enclosure protection class IP54, duly powder coated or painted with accessories duly painted with two coats of synthetic enamel paint of fire red colour over a coat of primer (ISC code 536 as per IS 2932 of 2003), cable alley, interconnection with suitable size solid copper busbar strip of adequate size for all power connections having switchgears and accessories, mountings and internal wiring with adequate size copper conductor cable, earth terminals, numbering etc. complete in all respect, suitable for satisfactory operation of main fire pump and jockey (pressurisation) pumps (1working+1standby) with necessary accessories, wiring & cabling along with allied accessories with following incoming and outgoings, suitable for automatic & manual operation on 415V, 3 phase, 50Hz ac supply as per specificationsthe capacity of electric motor driven pump are as followsa. Main fire pump(MFP) having capacity of 22kW 1no (1 working)b. Jockey pump(JP) capacity of suitable capacity 2 nos(1 working +1 standby, alternate run per start in auto mode)comprises of the following features & switchgears:1. Main incomer FP SFU having rotary handle with HRC fuses of suitable rating.2. Electrolytic grade copper strips for busbar of suitable sizes for main incomer andbranches to motor SFU\"s, starters & outgoing terminals with necessary accessories like stainless steel nut bolts with spring washers for connections, mounted on required no of epoxy or porcelain support insulators of suitable ratings etc.3. Individual pump TPN SFU having rotary handlewith HRC fuses of suitable rating.)4. Digital voltmeter & ammeter & RYB indicating lamps & push buttons & SPP, O/L & phase reversal protection with emergency stop switch.5. TPN SPD 100kA Type 1 +2 tested.6. Required pressure transducer with pressure indication on panel with cabling required for monitoring & automatic operation of fire pumps.7. System controller to control operation of main electric fire pump, jockey (pressurization) pumps in sequence with interlocking for operation of pumps as per specification with automatic/manual operation with selector switch & alternate run of standby Pumps consisting of relays, timers. sensors, annunciation window for fault indication, complete as per specification.8.Suitable capacity electric motor starters for all individual pumps with necessary push buttons & indications.9. Siren of required capacity to be activated when main pump starts & allied accessories as per requirements of local CFO or as directed by engineer in charge.10. Danger board as per IS.11. Spare HRC fuses minimum 2nos of each individual rating with required bakelite fuse holder for main & jockey fire pumps MFP=(1working), JP = (1working+1standby,
35	For addition of booster pump for fire hydrant/sprinkler, add as follows in the basic cost of item no 13-5-1 towards necessary accessories, indicators etc. with necessary interlocking and updation of control logic.....for 5.5/ 7.5 kW centrifugal type booster pump 1no(5working) , add Rs…....
36	Supplying anderecting100 mm dia Cast Iron end line strainer of Y-type flanged end pattern, PN16 pressure rating, SS screen, end connection with Flanged / Screwed / Socket Weld / Butt Weld End etc with standard OAR (open area Ratio) forpositive suction complete asper specification no. FF-VL/ELS ( 2 nos for jockey pump + 5 nos for booster pump=7 Nos.
37	Supplying anderecting200 mm dia Cast Iron end line strainer of Y-type flanged end pattern, PN16 pressure rating, screen of SS end connection with Flanged / Screwed / Socket Weld / Butt Weld End etc with standard OAR (open area Ratio) forpositive suction complete as per specification no. FF- VL/ELS ( 1 nos main pump+1 nos for sprinkler pump+ 1 for disel pump= 3 Nos).
38	Supplyinganderecting100mm dia.cast iron double flange sluice valve complete with PN16 pressure rating, asper specification no. FF-VL/SV
39	Supplyinganderecting200mm dia.cast iron double flange sluice valve complete with PN16 pressure rating, asper specification no. FF-VL/SV
40	Supplying and erecting 50 mm dia. cast iron double flange butterfly valve of size complete with PN16 pressure rating, asper specification no. FF-VL/BFV
41	Supplying & erecting cast iron double flange butterfly valve of size 75/80 mm dia. complete asper specification no. FF-VL/BFV
42	Supplying & erecting cast iron double flange butterfly valve of size 100 mm dia. complete asper specification no. FF-VL/BFV
43	Supplying & erecting cast iron double flange butterfly valve of size 150 mm dia. complete asper specification no. FF-VL/BFV
44	Supplying & erecting cast iron double flange butterfly valve of size 200 mm dia. Complete asper specification no. FF-VL/BFV
45	Supplying and erecting cast iron double flange ball type NRV of size 75mm/80 mm diacomplete asper specification no. FF- VL/NRV
46	Supplying and erecting cast iron double flange ball type NRV of size 100 mm dia complete as per specification no. FF-VL/NRV
47	Supplying and erecting cast iron double flange ball type NRV of size 150 mm dia complete as per specification no. FF-VL/NRV
48	Supplying and erecting cast iron double flange ball type NRV of size 200 mm dia complete as per specification no. FF-VL/NRV
49	Supplying&erectinggunmetal gatevalve of size25 mmdia complete asper specification no. FF-VL/GV
50	Supplying and installing air vessel of 300 mm dia1.5min heightM.S.tank installed inside pump house / on terrace complete as per specification no. FF-FFA/ACT(1 nos for hydrant + 1 nos for sprinkler= 2 nos).
51	Supplying and erecting 20/25mm dia gun metal air release cock, with necessary G.I. coupling to be fitted on top of air vessel or on wet riser complete asper specification no.FF-FFA/ARV (7no. For Riser + Two for Air Vessel= 9 nos.
52	Supplying and erecting 100 mm dia. pressure gauge , 0-300 PSI or 0-14 kg per cm square fitted with 12/15 mm dia. pad cock valve, erected with provided G.I. pipe, elbow etc.complete asper specification no. FF-FFA/PG
53	Supplying and erecting12/15 mm dia pressureswitchwith provided isolation valve,G.I. nipple, elbow, etc complete asper specification no. FF-FFA/PS
54	Making trench in Hard murum/Tar road having 0.75 m depth and minimum 0.3m width as per IS for laying provided cables up tovoltage level1.1Kv cable complete as per specification No. CW-EXN-CTR
55	Making cement concrete foundation in 1:2:4 cement concrete with foundation bolts and nuts complete ( cost of wooden box is included) for pumps(1.2x 1.2 x0.8)= 1.15 x 5= 5.76 cum for overhead tank foundation (1.8 x 1.8 x 0.3)=0.972 x 5=4.86 cum total(6.9+5.82)= 10.62 Cu-M. For Hydrant Line Pedastal of size 1.2 m X 0.6 m X 0.6 m =0.432 cum per pedastal , total terrace overhead ring line length 720 m /pedastal support will be at 4 m each ,hence total qty would be - 720/4 = 180 Nos ,so 180 X 0.432 = 77.76 cum( pump foundation 10.62 cum + Pedastal 77.76 cum = 88.38 cum total)
56	Supply, Instalation, testing of zinc aluminite fire water storage tank having capacity 50 KL having structreaboce ground which gives positive suction to fire Pumps. The tank shall include all civil work including site prepartion , excavation , PCC which can load of tank including of 100% water.( for booster pump as per NBC).
57	Supplying and erecting iron, sheet metal work consisting of CRCA sheets, various sections of iron, plates, chequered plates, rods, bars,MSpipes,etc. forpanel board or any other purpose with bending, cutting, drilling and welding completeerectedatthe position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority ( separate Iron work calculation sheet attached).
58	Supplying anderectingstainless steel single outlet hydrant valve fitted with necessary accessories complete asper specification no. FF-VL/HV.
59	Supplying and installing wall mounting swinging hose reel drum fitted with 19 mm dia. 30m long high pressure polypropylene (Polyhose)along with necessary accessories complete asper specification no. FF-FFA/HV
60	Supplying fire fighting reinforced rubber lined (R.R.L.) hose pipe, 63mm dia, 15m inlength, fitted with necessary accessories complete as per specification no. FF-FFA/RRL
61	Supplying & erecting stainless steel branch pipe 63 mm dia fitted with 20 mm dia detachable hexagonal nozzlecomplete as per specifications no. FF-FFA/NZ
62	Supplying and erecting brass orifice plate having 6 mm. thickness, 140 mm outer dia with required diameter of inner hole at every single outlet hydrant valve as per specification no. FF-FFA/OP (For Internal Hydrant).
63	Supplying and erecting M.S./CRCA cabinet for housing single hydrant valveof size ( 400 x 400 x 400)mm or hose pipe box of size ( 600 x 600 x 200)mmmade from min. 1.5 mm thick CRCA sheet with angle iron work of min. of size (25 x 25 x 4) mmhaving front doors with viewing glass of size (200x150) mmandlockingarrangement with necessary fixingmaterialsuch as rubber biddingetc. dulypainted in post box red colour( Code 538 of IS 5)
64	Carrying out core cutting of size 3\" to 5\" dia x 15\" length in the C.C./rock/stone wall with the help of specialized core cutting machine in proper manner and finishing the site as original.
65	Supplying and erecting G.I. pipe above ground of ‘C’ class ERW of size 25 mm dia with necessary fittings complete asper specification no. FF-PP
66	Supplying and erecting G.I. pipe above ground of ‘C’ class ERW of size 50 mm dia with necessary fittings complete asper specification no. FF-PP
67	Supplying and erecting G.I. pipe above ground of ‘C’ class ERW of size 65 mm dia with necessary fittings complete asper specification no. FF-PP
68	Supplying and erecting G.I. pipe above ground of ‘C’ class ERW of size 75/80 mm dia with necessary fittings complete asper specification no. FF-PP
69	Supplying and erecting G.I. pipe above ground of ‘C’ class ERW of size 100 mm dia with necessary fittings complete asper specification no. FF-PP
70	Supplying and erecting G.I. pipe above ground of ‘C’ class ERW of size 150 mm dia with necessary fittings complete asper specification no. FF-PP
71	Supplying and erecting G.I. pipe above ground of ‘C’ class ERW of size 200 mm dia with necessary fittings complete asper specification no. FF-PP
72	Supplying&erectinggun metal gatevalve of size20 mmdia complete asper specification no. FF-VL/GV
73	Supplying&erectinggunmetal gatevalve of size25 mmdia complete asper specification no. FF-VL/GV
74	Supplying and installing corrugated SS flexible conduit of size 25mm dia for connecting sprinkler head with necessary fittings as per specifications having 1000mm long with UL/FM
75	Supplying, erecting, testing and commissioning of quartzoid bulb sprinkler, 15 mm (½\") dia. NBCM Body chrome finished, 68º C fixed temperature rating with deflector disc of conventional construction complete as per specification no. FF-SPR.
76	Supplying, erecting, testing and commissioning of horizontal sidewall quartzoid bulb sprinkler, 15 mm (½\") dia quartzoid bulb. NBCM Body chrome finished, 68º C fixed temperature rating with deflector disc of conventional construction complete as per specification no. FF-SPR/SS
77	Supplying and erecting fire resistant mortar (20 kg) with fire resistance class S90 as per National Electrical Code (NEC) SP30-2011 suitable to seal the openings of all kinds of cables, pipes and cable support system in steel, aluminium and plastic profiles ( except hollow core conductors). The residual openings shall be closed with filler, as per specification no FF-FRM. Note :- For estimating purpose consider 1 bag of 20kg to cover 300mm x 400mm area 150mm thick or 0.018 m3. ( Approx 780 rooms in Hospital, Each rooms having Fire sprinkler and other utility opening ,hence conidered one 20 kg bag per room. Total Set Required ( 300 X 400 X 150 = 1 room X 780 =780 Nos)
78	Supplying, installing, testing and commissioning of micro processor based intelligent addressable main fire alarm panel, central processing unit with the 8 loop capacity and capable of supporting upto 250 devices and detectorsper loop,with on-board LCD display with min 16 lines of text, operating at 230 V 50 HZ - AC with inbuilt Battery Backup of a minimum 24 hours in normal condition and 30 min in alarm condition, suitable provision for network connectivity, interfacing with third party equipment via a MODBUS/ OPC/ L-ON interface etc. conforming to IS 15908:2021, IS 2189: 2008, EN 54 & VDS / FM/UL8
79	Supplying, installing, testing and commissioning ofrepeater panel with suitable battery backup of a minimum of 24 hours in normal condition and 30 min in alarm condition, 80 backlit alphanumeric LCD display with inbuilt buzzer to indicate fault/fire alarm, manual control keys for silence/mute and to reset the FACP from the repeater station. Panel size shall not more than 175 x 275 x 65 mm conforming to EN 54 or UL approvedwith 3 years equipment replacement warranty FF-AFAS/RP
80	Supplying, installing, testing and commissioning of addressable optical smoke detector, single/twin LED’s with 360 degree view, suitable for low voltage 15 to 32 V DC two wires supply, in-built locking mechanism to check the removal and pilferage of the detector, in built isolation mode, start up current 300µA and alarm condition current shall be maximum 6.5 mA, operating temperature 0°C to 50°C, humidity 0-95% RH, IP 41, conforming to IS 2189: 2008, 11360_1985_Reff2020 EN 54 or ULApproved with 3 years equipment replacement warranty FF-AFAS/SD
81	Supplying, installing, testing and commissioning of intelligent addressable thermal/heat detector with rate of rise cum fixed temperature thermistor complete with base as required, suitable for temperature variations from -20°C to 38°C for fixed-heat and rate-of-rise type detectors and 0°C to 66°C for high heat type detectors, in built isolation mode, suitable for offices/ceiling cable trenches/less ventilation area\"s etc. with 3 years equipment replacement warrantyIS : 2175 - 1988 reaffirmed 2000,IS 15908:2021standards FF-AFAS/SD.
82	Supplying, installing, testing and commissioning of addressable manual call points ( break glass type/pull station type), made of addressable break glass plastic square in shape surface/flush mounted with \"Break Glass\" massage embedded on the glass, complete erected with mounting base and required accessories conforming to EN 54 or UL listedwith 3 years equipment replacementwarrantyFF-AFAS/MCP.
83	Supplying, installing, testing and commissioning of addressable fire control/relay module complete as required, with 3 years equipment replacement warranty conforming to IS 5051Part 2 (Sec 1 to 3) : 1982 reed relays,EN 54 or UL Listed FF- AFAS/CRM
84	Supplying, installing, testing and commissioning of addressable fire monitor module complete as required. EN 54 or UL Listed with 3 years equipment replacement warranty conforming toIS 5051Part 2 (Sec 1 to 3) : 1982 Reed relaysFF-AFAS/MM
85	Supplying, installing, testing and commissioning of addressable fire isolator module complete as required.EN 54 /FM or UL Listed with 3 years equipment replacement warranty conforming to IS5051Part 2 (Sec 1 to 3) : 1982 Reed relays FF-AFAS/ISM
86	Supplying, installing, testing and commissioning of addressable horn cum strobe sound/ hooter, output frequency 500 to 1000 Hz with dB as per Chart given in IS 15908:2021, with flashing at 1 Hz over the strobe’s entire operating voltage rangeEN 54, conforming to IS 2189: 2008, IS 15908:2021standards with 3 years equipment replacement warranty FF-AFAS/SSH.
87	Supplying, installing, testing and commissioningFR, XLPE armouredcable 2 core 1.5 sq.mm. copper conductor complete erected on wall/ ceiling complete asper specification no. CB-LT/CU
88	Supplying, installing, testing and commissioningFR, XLPE armouredcable 8 core 1.5 sq.mm. copper conductor complete erected on wall/ ceiling complete asper specification no.CB-LT/CU
89	Supplying, Installing, Testing & Commissioning of Microprocessor based system 6 zone controller complete with capacity upto 16 Zone designed as per tender specifications for Zone wise Announcement can connect upto 2 call station upto 255 messages to be stored with 12 input points for trigger points for EVAC compliment IFC 60489. Routers with 3 EMG inputs contacts and 6 volume contacts shall have a superviosry features dual tone controls for speech & music processor with relays for activating pre recorded fire alarm messages it shall be rack mountable.
90	Supplying, Installing, Testing & Commissioning of Announcement Console/Call Station shall be designed for 6 Zone Call Station with Expansion Keypads of At least 2 Additional Zones and Capable of Integration with at least 8 such keypads should be selected.
91	Supplying, erecting, testing and commissioning 120 W amplifier suitable to operate on 230VoltsA.C. / 12VoltsD.C. supply complete asper specification no. FF- PA/AFR
92	Supplying, erecting, testing and commissioning 15 to 30 Watts sound column or ceiling mounted complete asper specification no. FF-PA/SOC
93	Supplying and fixing 42 U floormount server rack (Dimension-DxWxH – 800x1000x2070mm) as per specification No. WG-NAS/RAK
94	Supplying, erecting, testing and commissioning stand mounted/handheld type wired microphone having 2 mV/Pa sensitivity, impedance level limit 300 ohms and 50 - 16000 Hz suitable to operate in -10 deg C to +55 deg C with min. 7 metre shielded cable and 3 Pin Professional XLR Connector, stereo jack complete asper specification no.FF- PA/MIC
95	Supplying, erecting, testing and commissioningrust free microphone floor stand of chrome plating/powder coating or S.S. material , 500 mm to 1500 mm height and sturdy mechanism ensuring trouble free movement complete.
96	Supplying, erecting, testing and commissioning of 2 core shielded sound cable complete asper specification no.FF- PA/MCC
97	Supplying & erecting Carbon Dioxide (CO2) fire extinguisher of 4.5 kg. capacity cartridge type conform to IS 2878 /15683 complete erected with necessary clamp made from 50 x6 mm. M. S. flat with nut & bolts routed in wall complete.
98	Supplying and erecting 4 kg clean agent gas Nitrogen pressurised controllable dicharge mechanism, pressure guage, Discharge hose and nozzle epoxy polyster powder coated as per IS 15683 ISI mark fire. extinguisheroperating temperature (-)20 to (+) 55 C kg capacity suitable for A,B,C class ofFIRE complete.
99	Supplying and erecting DCP Type 25 kg capacity trolley Mounted with controllable dicharge mechanism, pressure guage, Discharge hose and nozzle epoxy polyster powder coated as per IS 15683 ISI mark fire extinguisheroperating temperature (-)20 to (+) 55 C kg capacity suitable for A,B,C class of FIRE complete.
100	Supplying and erecting of fire Exit & Eire Exinguishersignlge Indicating the floor- numtber in words &syslem(Fire Exiinguisher& Accessories ) (Non CSR Approved by S.E.Office ,mumbaivide T.Sletterno- 108Date- 13/01/2022 )
101	Supplying , Installation , Testing And Commissioning of Hinged Metal fire door 120 min fire rated un insulated single 50mm THK Honey Comb Infill single double RBT 143 x 57mm frame Straight with anchor fast erness frame 1.0 & shutter 0.9 mm powder coated to ral shade SFP SS Ball bearing 4\" x 3\" x 3\"mm hionghed for steel doors ingersoll rand briton 121, NCE. SES Door closer size 3 with standard ARM , sprayed silver finish SFP SS sashlock with 70mm back set and 24 mmfor end , SS lever handle 22x 125 mm on rose , Euro profile cylinder 70 mm with both side key 29 SS strike plate Escutchenosschott pyran fire rated clear Glass 6mm thick 240 x340 33 Hinged Metal Fire Door 120 min fire Rated(Non-Csr)
102	Supply installation testing and commissioning of Fire Curtains with Galvanized MS powder coated head top box of suitable size, Powder coated side guides (100mm x 50 mm) and bottom bars with Gravity fail safe DC motors one per roller for curtain up operation with standard battery back-up fixed into 76/88 mm steel rollers with FAB690PU fabric must be according to DIN EN 13501-1 and stainless steel reinforced glass fibre with fire-retardant aluminum pigmented polyurethane coating, with its control panel and all installation assemblies & accessories required to complete the installation. The operation shall be suitable for dedicated 230 volts UPS, 50 Hz AC supply. Complete system tested in accordance with EN 1634-1 and EN 12101-1 (foar minimum 120 minutes integrity & tested at 1000°C) with CE certificate from European Notified Body. Both test reports EN 1634-1 & EN 12101-1 must be according to the requirement of particular project, if single roller curtain is there then single roller certificates and double roller curtain is there than double roller certificates must be submitted accordingly. The fire curtain must be according to Classification of Fire Resistance Performance in Accordance with EN 13501-2: 2016. The manufacturer’s valid EN certification for oversized fire curtains according to EN 15269-11 covering the sizes of offered fire curtains as per BOQ, should be available. Each Fire Curtain shall have independent control Panel suitable for 230V AC supply, provision to integrate with Fire signal, and battery backup. The emergency retract switch shall be provided on both sides of curtain. The Fire curtain shall reset automatically when fire control panel is reset. Fabric and all components sourced from the original manufacturer who has valid type test certificate of the fire curtain and third-party quality surveillance audit as per above standards including oversize certification according to applicable EN standards. The scope also includes fabrication, supply and installation of closed MS sections corner supports for fixing side channels, design suitable for stability and integrity with two hours fire rating, wherever required for full height of Fire curtain, as per approved design, duly finished with powder coating of finish matching toside channels of fire curtains.All the required test / certificates must be less than 5 Years validity. No mirror certificates allowedInstallation: The fire curtain has fixing options to suit all types of ceiling configurations and can be integrated into either a suspended or a solid ceiling. It remains hidden until required. Upon receiving a signal from the fire detection system or on loss of power with the gravity fail safe system, the curtain automatically unwinds to its operational position.
103	Supplying and erecting PVC trunking (PVC casing-n-capping)ofsize25 mm with accessorieson wall/ceiling as per specification No: WG-MA/CON.
104	Supplying and erecting mains with 3x2.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW
105	Supplying and erectingmodular type switch 6A / 10A duly erected on provided plate and box with wiring connections complete.
106	Supplying and erectingmodular type 3 pin 6 / 16A multi socket with safety shutter, duly erected on provided plate and box with wiring connections complete.
107	Supplying and erecting PVC Surface modular switch box with double mounting plate for 3module duly erected.
108	Carrying out core cutting of size 3\" to 5\" dia x 15\" length in the C.C./rock/stone wall with the help of specialized core cutting machine in proper manner and finishing the site as original.
109	Supplying and erecting iron, sheet metal work consisting of CRCA sheets, various sections of iron, plates, chequered plates, rods, bars,MSpipes,etc. forpanel board or any other purpose with bending, cutting, drilling and welding completeerectedatthe position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority ( separate Iron work calculation sheet attached).
110	Supplying, erecting& terminatingFR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 4 sq.mm. copperconductor completeerected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipeas per specification no. CB-LT/CU(for booster Pump)
111	Providing earthing with galvanized iron earth plate size 60 x 60 x 0.6 cm complete with all materials, testing & recording the results as per specification no. EA-EP (earthig schedule: 2 nos for each 2 nosmain fire pump for hydrant and sprinkler , 2nos for each 2 nos jockey pump for sprinkler and hydrant , 1 nos for main fire panel and 1 nos for disel engine pump).= total 6 nos of earthing.
112	Supplying and erecting GI strip of required size used for earthing on wall and/or any other purpose with necessary GI clamps fixed on wall painted with bituminous paint in an approved manner with joints required. As per specification no EA-EP.(25x5) (1kg/m x 40 m=0 kg)
113	Supplying, installation, testing and commissioning of booster fire pump [BP] suitable for water discharge of 900 LPM at 35 m head driven by electric motor 415 volts, 3 phase 50 Hz, AC supply of 7.5 kW or of suitable kW capacity for manual/automatic operation and consisting of following :(a) Horizontal/vertical type, single/multi stage, centrifugal casing pump of cast iron body & bronze/CI impeller with stainless steel shaft (SS410 grade), mechanical seal conforming to IS 1520.(b) Squirrel cage induction motor, TEFC, synchronous speed 3000 RPM, suitable for operation on with IP 55 protection for enclosure, horizontal foot mounted type with Class-\"F\" insulation, conforming to IS-325.(c) M.S. fabricated common base plate, coupling, coupling guard, foundation bolts etc. as required.(d)Erected on provided suitable size cement concrete foundation duly plastered with anti vibration pads with perfect aligning, proper levelling complete pump set with accessories duly painted with two coats of synthetic enamel paint of fire red colour over a coat ofprimer (ISC code 536 as per IS 2932 of 2003) complete, as per specification no. FF-MFP/BP
114	For addition of booster pump for fire hydrant/sprinkler, add as follows in the basic cost of item no 13-5-1 towards necessary accessories, indicators etc. with necessary interlocking and updation of control logic.....for 5.5/ 7.5 kW centrifugal type booster pump 1no(1working) , add Rs…....
115	Supplying and erecting G.I. pipe above ground of ‘C’ class ERW of size 25 mm diawith necessary fittings complete asper specification no. FF-PP
116	Supplying and erecting G.I. pipe above ground of ‘C’ class ERW of size 50 mm dia with necessary fittings complete asper specification no. FF-PP
117	Supplying and erecting G.I. pipe above ground of ‘C’ class ERW of size 65 mm dia with necessary fittings complete asper specification no. FF-PP
118	Supplying and erecting G.I. pipe above ground of ‘C’ class ERW of size 75/80 mm dia with necessary fittings complete asper specification no. FF-PP
119	Supplying and erecting G.I. pipe above ground of ‘C’ class ERW of size 100 mm dia with necessary fittings complete asper specification no. FF-PP
120	Supplying and erecting G.I. pipe above ground of ‘C’ class ERW of size 150 mm dia with necessary fittings complete asper specification no. FF-PP
121	Supplying anderecting100 mm dia Cast Iron end line strainer of Y-type flanged end pattern, PN16 pressure rating, SS screen, end connection with Flanged / Screwed / Socket Weld / Butt Weld End etc with standard OAR(open area Ratio) forpositive suction complete asper specification no. FF-VL/ELS
122	Supplyinganderecting100mm dia.cast iron double flange sluice valve complete with PN16 pressure rating, as per specification no. FF-VL/SV
123	Supplying and erecting 50 mm dia. cast iron double flange butterfly valve of size completewith PN16 pressure rating, asper specification no. FF-VL/BFV
124	Supplying and erecting 75/80 mm dia. cast iron double flange butterfly valve of size complete with PN16 pressure rating, asperspecification no. FF-VL/BFV
125	Supplying & erecting cast iron double flange butterfly valve of size 100 mm dia. complete asper specification no. FF-VL/BFV
126	Supplying & erecting cast iron double flange butterfly valve of size 150 mm dia. completeasper specification no. FF-VL/BFV
127	Supplying and erecting cast iron double flange ball type NRV of size 100 mm dia complete asper specification no. FF-VL/NRV
128	Supplying&erectinggunmetal gatevalveof size25 mmdia complete asper specification no. FF-VL/GV
129	Supplying anderectingstainless steel single outlethydrantvalve fitted with necessaryaccessories complete asper specification no. FF-VL/HV.
130	Supplying and installing wall mounting swinging hose reel drum fitted with 19 mm dia. 30m long high pressure polypropylene(Polyhose)along with necessary accessories complete asper specification no. FF-FFA/HV
131	Supplying fire fighting reinforced rubber lined (R.R.L.) hose pipe, 63mm dia, 15m inlength, fitted with necessary accessories complete asper specification no. FF-FFA/RRL
132	Supplying & erecting stainless steel branch pipe 63 mm dia fitted with 20 mm dia detachable hexagonal nozzle complete as perspecifications no. FF-FFA/NZ
133	Supplying and erecting 20/25mm dia gun metal air release cock, with necessary G.I. coupling to be fitted on top of air vessel or on wet riser complete asper specification no.FF-FFA/ARV (7no. For Riser + Two for Air Vessel= 9 nos.
134	Supplying and erecting 100 mm dia. pressure gauge , 0-300 PSI or 0-14 kg per cm square fitted with 12/15 mm dia. pad cock valve,erected with provided G.I. pipe, elbow etc. complete asper specification no. FF-FFA/PG
135	Supplying and erecting brass orifice plate having 6 mm. thickness, 140 mm outer dia with required diameter of inner hole at everysingle outlet hydrant valve as per specification no. FF-FFA/OP (For Internal Hydrant).
136	Supplying and erecting M.S./CRCA cabinet for housingFloorHydrant valve,hosepipe, hosereeland branch pipe(size 1000 x 736 x 736 mm.) made from 16 SWG sheetand angle iron 25 x 25 x 4 mm. having front doors with viewing glass (8\"x6\") and locking arrangement with necessary fixing material such as rubber bidding etc. duly painted in post box red colour( Code 538 of IS 5) (BoX for Two set of Hose Pipe along with 1set of Branch Pipe).
137	Supplying, installing, testing and commissioning ofmicro processor based intelligent addressable main fire alarm panel, central processing unit with the 8 loop capacity and capable of supporting upto 250 devices and detectorsper loop,with on-board LCD display with min 16 lines of text, operating at 230 V 50 HZ - AC with inbuilt Battery Backup of a minimum 24 hours in normal condition and 30 min in alarm condition, suitable provision for network connectivity, interfacing with third party equipment via a MODBUS/ OPC/ L-ON interface etc. conforming to IS 15908:2021, IS 2189: 2008, EN 54 & VDS / FM/UL864(10th edition)with 3 years replacement warranty FF-AFAS/CP
138	Supplying, installing, testing and commissioning ofrepeater panel with suitable battery backup of a minimum of 24 hours in normal condition and 30 min in alarm condition, 80 backlit alphanumeric LCD display with inbuilt buzzer to indicate fault/fire alarm, manual control keys for silence/mute and to reset the FACP from the repeater station. Panel size shall not more than 175 x 275 x 65 mm conforming to EN 54 orUL approvedwith 3 years equipment replacement warranty FF-AFAS/RP
139	Supplying, installing, testing and commissioning of addressable optical smoke detector, single/twin LED’s with 360 degree view, suitable for low voltage 15 to 32 V DC two wires supply, in-built locking mechanism to check the removal and pilferage of the detector, in built isolation mode, start up current 300µA and alarm condition current shall be maximum 6.5 mA, operating temperature 0°C to 50°C, humidity 0-95% RH, IP 41, conforming to IS 2189: 2008, 11360_1985_Reff2020 EN 54 or ULApproved with 3 years equipment replacement warranty FF-AFAS/SD
140	Supplying, installing, testing and commissioning of intelligent addressable thermal/heat detector with rate of rise cum fixed temperature thermistor complete with base as required, suitable for temperature variations from -20°C to 38°C for fixed-heat and rate-of-rise type detectors and 0°C to 66°C for high heat type detectors, in built isolation mode, suitable for offices/ceiling cable trenches/less ventilation area\"s etc. with 3 years equipment replacement warrantyIS : 2175 - 1988 reaffirmed 2000,IS 15908:2021standards FF-AFAS/SD.
141	Supplying, installing, testing and commissioning of addressable manual call points ( break glass type/pull station type), made of addressable break glass plastic square in shape surface/flush mounted with \"Break Glass\" massage embedded on the glass, complete erected with mounting base and required accessories conforming to EN 54 or UL listedwith 3 years equipment replacementwarrantyFF-AFAS/MCP.
142	Supplying, installing, testing and commissioning of addressable fire control/relay module complete as required, with 3 years equipment replacement warranty conforming to IS 5051Part 2 (Sec 1 to 3) : 1982 reed relays,EN 54 or UL Listed FF-AFAS/CRM
143	Supplying, installing, testing and commissioning of addressable fire monitor module complete as required. EN 54 or UL Listed with 3 years equipment replacementwarranty conforming toIS 5051Part 2 (Sec 1 to 3) : 1982 Reed relaysFF-AFAS/MM
144	Supplying, installing, testing and commissioning of addressable fire isolator module complete as required.EN 54 /FM or UL Listed with 3 years equipment replacement warranty conforming to IS5051Part 2 (Sec 1 to 3) : 1982 Reed relays FF-AFAS/ISM
145	Supplying, installing, testing and commissioning of addressable horn cum strobe sound/ hooter, output frequency 500 to 1000 Hz with dB as per Chart given in IS 15908:2021, with flashing at 1 Hz over the strobe’s entire operating voltage rangeEN 54, conforming to IS 2189: 2008, IS 15908:2021standards with 3 years equipment replacement warranty FF-AFAS/SSH.
146	Supplying, installing, testing and commissioningFR, XLPE armouredcable 2 core 1.5 sq.mm. copper conductor complete erected on wall/ ceiling complete asper specification no. CB-LT/CU
147	Supplying, erecting, testing and commissioning 120 W amplifier suitable to operate on 230VoltsA.C. / 12VoltsD.C. supply complete asper specification no. FF- PA/AFR
148	Supplying, erecting, testing and commissioning 15 to 30 Watts sound column or ceiling mounted complete asper specification no. FF-PA/SOC
149	Supplying, erecting, testing and commissioning stand mounted/handheld type wired microphone having 2 mV/Pa sensitivity, impedance level limit 300 ohms and 50 - 16000 Hz suitable to operate in -10 deg C to+55 deg C with min. 7 metre shielded cable and 3 Pin Professional XLR Connector, stereo jack complete asper specification no.FF- PA/MIC
150	Supplying, erecting, testing and commissioningrust free microphone floor stand of chrome plating/powder coating orS.S. material , 500 mm to 1500 mm height and sturdy mechanism ensuring trouble free movement complete.
151	Supplying, erecting, testing and commissioning of 2 core shielded cable complete asper specification no.FF- PA/MCC
152	Supplying and installing corrugated SS flexible conduit of size 25mm dia for connecting sprinkler head with necessaryfittings as per specifications having 1000mm long with UL/FM
153	Supplying, erecting, testing and commissioning of quartzoid bulb sprinkler, 15 mm (½\") dia. NBCM Body chrome finished, 68º C fixed temperature rating with deflectordisc of conventional construction complete as per specification no. FF-SPR.
154	Supplying, erecting, testing and commissioning of horizontal sidewall quartzoid bulb sprinkler, 15 mm (½\") dia quartzoid bulb. NBCM Body chrome finished, 68º C fixed temperature rating with deflector disc of conventional construction complete as per specification no. FF-SPR/SS
155	Supplying & erecting Carbon Dioxide (CO2) fire extinguisher of 4.5 kg. capacity cartridge type conform to IS 2878 /15683 complete erected with necessary clamp made from 50 x 6 mm. M. S. flat with nut & bolts routed in
156	Supplying and erecting 4 kg clean agent gas Nitrogen pressurised controllable dicharge mechanism, pressure guage, Discharge hose and nozzle epoxy polyster powder coated as per IS 15683 ISI mark fire extinguisheroperating temperature (-)20 to (+) 55 C kg capacity suitable for A,B,C class of FIRE complete.
157	Supplying and erecting DCP Type 25 kg capacity trolley Mounted with controllable dicharge mechanism, pressure guage, Discharge hose and nozzle epoxy polyster powder coated as per IS 15683 ISI mark fire extinguisheroperating temperature (-)20 to (+) 55 C kg capacity suitable for A,B,C class ofFIRE complete.
158	Supplying and erecting fire resistant mortar (20 kg) with fire resistance class S90 as per National Electrical Code (NEC) SP30-2011 suitable to seal the openings of all kinds of cables, pipes and cable support system in steel, aluminium and plastic profiles ( except hollow core conductors). The residual openings shall be closed with filler, as per specification no FF-FRM. Note :- For estimating purpose consider 1 bag of 20kg to cover 300mm x 400mm area 150mm thick or 0.018 m3. ( Total 108 rooms in Hospital, Each rooms having Fire sprinkler and other utility opening ,hence conidered one 20 kg bag per room. Total Set Required ( 300 X 400 X 150 = 1 room X 186 =38 Nos)
159	Making trench in Hard murum/Tar road having 0.75 m depth and minimum 0.3m width as per IS for laying provided cables up tovoltage level1.1Kv cable complete as per specification No. CW-EXN-CTR
160	Making cement concrete foundation in 1:2:4 cement concrete with foundation bolts and nuts complete ( cost of wooden box is included) for pumps for pump (1.2x 1.2 x0.8)= 1.15 x 6 = 6.9 cum for overhead tank (1.8 x 1.8 x 0.9)=2.91 x 2= 5.82 cum total (6.9+5.82)= 12.72 Cu-M
161	Supplying and erecting of fire Exit & Eire Exinguisher signlge Indicating the floor- numtber in words &syslem(Fire Exiinguisher& Accessories
162	Supply, Installation, testing of zinc aluminite fire water storage tank having capacity 20 KL having structreaboce ground which gives positive suction to fire Pumps. The tank shall include all civil work including site prepartion, excavation , PCC which can load of tank including of 100% water.( for booster pump as per NBC).
163	Supplying , Installation , Testing And Commissioning of Hinged Metal fire door 120 min fire rated un insulated single 50mm THK Honey Comb Infill single double RBT 143 x 57mm frame Straight with anchor fast erness frame 1.0 & shutter 0.9 mm powder coated to ral shade SFP SS Ball bearing 4\" x 3\" x 3\"mm hionghed for steel doors ingersoll rand briton 121, NCE. SES Door closer size 3 with standard ARM , sprayed silver finish SFP SS sashlock with 70mm back set and 24 mmfor end , SS lever handle 22x 125 mm on rose , Euro profile cylinder 70 mm with both side key 29 SS strike plate Escutchenosschott pyran fire rated clear Glass 6mm thick 240 x 340 33 Hinged Metal Fire Door 120 min fire Rated
164	Supplying and erecting PVC trunking (PVC casing-n-capping) of size 25 mm with accessorieson wall/ceiling as per specification No: WG-MA/CON.
165	Supplying and erectingHMS PVC conduit FRLS grade 25 mm dia. with necessary accessories in wall/floor with chiselling appropriately as per specification No: WG- MA/CC.
166	Supplying and erecting mains with 2x4 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW
167	Supplying and erecting mains with 1x4 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specificationNo: WG-MA/BW
168	Supplying and erecting mains with 2x1.5 sq.mm FRLSHcopperPVC insulated wire laid in provided conduit/trunking/insidepole/Bus bars or any other places as per specification No: WG-MA/BW
169	Supplying and erecting mains with 1x1.5 sq.mm FRLSHcopperPVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as perspecification No: WG-MA/BW
170	Supplying and erecting mains with 2x2.5 sq.mmFRLSH copper PVC insulated wire laid in provided conduit/trunking/insidepole/Bus bars or any other places. as per specification No: WG-MA/BW
171	Supplying and erecting mains with 1x2.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW
172	Point wiring for light/fan/bell in 20 mmFRLS grade HMS PVC conduit with 1.5 sq.mm (2+1E) FRLSH grade copper wire withflush type switch and requiredaccessories as per specification No: WG-PW/SW
173	Point wiring for light/bell/exhaust fan in 20 mm FRLS grade HMS PVC conduit with 1.5 sq.mm (2+1E) FRLSH grade copper wire, modular type switch, earthing and requiredaccessories as per specification No: WG- PW/SW.
174	Point wiring for independent plug in 20 mm FRLS grade HMS PVC conduit with 1.5 sq.mm (2+1E ) FRLSH grade copper wire, modular type switch,earthing and required accessories as per specification No: WG-PW/SW
175	Supplying and erecting single pole and neutral distributionboard (SPNDB), with 2 ways for incoming and 6 ways (6 poles) for outgoing SP MCBs, with door, 1.2mm thickness surface / flush mounted, IP 43 Protection on iron / GI frame as per specification no. SW-SWR/MCBDB
176	Supplying & erecting inverter LED batten 20W tube light fitting with polycarbonate housing, heat sink, integrated HF electronic driver, Min. 2600 mAhLithium ion Battery with charging time of 8-10 Hours and backup time of Min. 3 hrs. with minimum 25% of initial Watts having luminous efficacy of 100 lumen/watt, CRI>80, CCT of 6500K and THD<=20% having useful life of minimum 25000 hrs. with overheating protection with 2 years warranty.
177	Supplying and erecting fresh air cum exhaust fan of light duty 250 V A.C. 50 cycles 300mm. 1400 RPM rust proof body & blades,wire mesh, duly erected, complete.
178	Supplying and erectingmodular type switch 16Aduly erected on provided plate and boxwith wiring connections complete.
179	Supplying and erectingmodular type 3 pin 6 / 16Amultisocket with safety shutter,dulyerected on provided plate and box with wiring connections complete.
180	Supplying and erecting PVC Surface modular switch box with double mounting plate for 3module duly erected.
181	Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 95sq.mm. aluminium conductor completeerected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipeas per specification no. CB-LT/AL
182	Supplying, erecting &terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½ core 300 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipeasper specification no. CB-LT/AL(main incoming cable to main fire panel).
183	Supplying, erecting& terminatingFR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 4 sq.mm. copperconductor completeerected with glands & lugs, on wall/ trusses/ pole or laid inprovided trench/ pipeas per specification no. CB-LT/CU(for booster Pump)
184	Supplying, erecting& terminatingFR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 6 sq.mm. copperconductor completeerected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipeas per specification no. CB-LT/CU
185	Supplying & laying (including excavation) reinforced cement concrete pipe of IS 458:2003 NP-2 class of 150 mm internal diameter in proper line, level and slope including providing and fixing collars in cement mortar 1:2 and curing etc. complete.
186	Providing & erecting 3 Pole MCCB 415V, 400A, rated short-circuit breaking capacity 36 kA (Ics=100% of Icu), adjustable thermal (overload) setting and adjustable magnetic setting with provided leads, provision for installation of shunt/ UV/ trip alarm contact and MCCB should have phase barriers both sides, with insulation withstand capacity 800V, no line-load bias in provided enclosure /panel as per specification no. SW- SWR/MCCB. Note : For use of 4 pole MCCBs in place of 3 pole MCCBs add 20% in rate of 3 pole MCCB. Hence 18563 X 20%= 3712.60/-
187	Supplying and laying (including excavation of suitable width & depth up to 90 cm) 146 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete.
188	Providing & erecting hot dipped galvanised ladder type cable tray manufactured from 16 SWG (1.6 mm thick) GI sheet of 150 mmwidth & 100 mm height comprising all required standard accessories.
189	Providing & erecting hot dipped galvanised ladder type cable traymanufactured from 16 SWG (1.6 mm thick) GI sheet of 300 mm width & 100 mm height comprising all required standard accessories.
190	Providing & erecting hot dipped galvanised ladder type cable traymanufactured from 16 SWG (1.6 mm thick) GI sheet of 400 mmwidth & 100 mm height comprising all required standard accessories.
191	Providing earthing with galvanized iron earth plate size 60 x 60 x 0.6 cm complete with all materials, testing & recording the results as per specification no. EA-EP (earthig schedule: 2 nos for each 2 nos main fire pump for hydrant and sprinkler , 2nos for each 2 nos jockey pump for sprinkler and hydrant , 1 nos for main fire panel and 1 nos for disel enginepump).= total 6 nos of earthing.
192	Supplying and erecting GI strip of required size used for earthing on wall and/or any other purpose with necessary GI clamps fixed on wall painted with bituminous paint in an approved manner with joints required. As perspecification no EA-EP.(25x5) (1kg/m x 60 m=60 kg)
193	Supplying, installation, testing and commissioning ofmain fire pump(MFP / EP) suitable for water discharge of 2280 to 2850 LPM at 120 to 90 m head driven by electric motor 415 volts, 3 phase 50 Hz, AC supply of 75kW or of suitable kW capacity for manual/automatic operation and consisting of following :(a) Horizontal type, single stage, centrifugal/split casing pump of cast iron body & bronze impeller with stainless steel shaft(SS410 grade), mechanical seal conforming to IS 1520.(b) Squirrel cage induction motor, TEFC, synchronous speed 3000 RPM, suitable for operation with IP 55 protection for enclosure, horizontal foot mounted type with Class-\"F\" insulation, conforming to IS-325.(c) M.S. fabricated common base plate, coupling, coupling guard, foundation bolts etc. as required.(d) Erected on provided suitable size cement concrete foundation duly plastered with anti vibration pads with perfect aligning, proper levellingcomplete pump set with accessories duly painted with two coats of synthetic enamel paint of fire red colour over a coat of primer (ISC code 536 as per IS 2932 of 2003) complete, asper specification no. FF- MFP/SSC/EP
194	Supplying, installation, testing and commissioning of jockey fire pump (JP) suitable for water discharge of 180 to 240 LPM at 110 to 90 m head driven by electric motor415 volts, 3 phase 50 Hz, AC supply of 11 kW or of suitable kW capacity for manual/automatic operation and consisting of following :(a) Horizontal/vertical type, multi stage, centrifugal casing pump of cast iron body & bronze impeller with stainless steel shaft (SS410 grade), mechanical seal conforming to IS 1520.(b) Squirrel cage induction motor, TEFC, synchronous speed 3000 RPM, suitable for operation with IP 55 protection for enclosure, horizontal foot mounted type with Class-\"F\" insulation, conforming to IS-325.(c) M.S. fabricated common base plate, coupling, coupling guard, foundation bolts etc. as required.(d) Erected on provided suitable size cement concrete foundation duly plastered with anti vibration pads with perfect aligning, proper levelling complete pump set with accessories duly painted with two coats of synthetic enamel paint of fire red colour over a coat ofprimer (ISC code 536 as per IS 2932 of 2003) complete, asper specification no. FF-MFP/JP
195	Supplying, installation, testing and commissioning of booster fire pump [BP] suitable for water discharge of 900 LPM at 35 m head driven by electric motor 415 volts, 3 phase 50 Hz, AC supply of 7.5 kW or of suitable kW capacity for manual/automatic operation and consisting of following :(a) Horizontal/vertical type, single/multi stage, centrifugal casing pump of cast iron body & bronze/CI impeller with stainless steel shaft (SS410 grade), mechanical seal conforming to IS 1520.(b) Squirrel cage induction motor, TEFC, synchronous speed 3000 RPM, suitable for operation on with IP 55 protection for enclosure, horizontal foot mounted type with Class-\"F\" insulation, conforming to IS-325.(c) M.S. fabricated common base plate, coupling, coupling guard, foundation bolts etc. as required.(d)Erected on provided suitable size cement concrete foundation duly plastered with anti vibration pads with perfect aligning, proper levelling complete pump set with accessories duly painted with two coats of synthetic enamel paint of fire red colour over a coat ofprimer (ISC code 536 as per IS 2932 of 2003) complete, as per specification no. FF-MFP/BP
196	Supplying, installation, testing and commissioning of main fire pump (MFP/DP) suitable for water discharge of 2280 to 2850 LPM at 120 to 90 m head driven by 110 HP or suitable HP capacity diesel engine at required working speed suitable for automatic operation and consisting of following :(a) Horizontal type, single stage, centrifugal casing pump of cast iron body & bronze impeller with stainless steel shaft(SS410 grade), mechanical seal conforming to IS 1520.(b) Water cooled with radiator, diesel engine conforming to relevant IS standard complete with auto starting mechanism, 12/24 volts DC electric starting equipment with battery of required AH capacity with necessary charger suitable to work on 230v, 50Hz AC supply, diesel tank of minimum 150ltr capacity with first filling of diesel up to 100% level with necessary piping with valves up to engine , exhaust pipe extended up to 10 m outside pump house duly insulated with 50 mm thick glass wool with 1.0 mm thick aluminium sheet cladding, residential silencer, instruments and protection as per standard specification, stop solenoid for auto stop in the event of fault with audio indications etc. as required.(c) M.S. fabricated common base plate, coupling, coupling guard, foundation bolts etc. as required.(d) Erected on provided suitable size cement concrete foundation duly plastered with anti vibration pads with perfect aligning, proper levelling complete pump set with engine assembly and accessories duly painted with two coats of synthetic enamel paint of fire red colour over a coat of primer (ISC code 536 as per IS 2932 of 2003) complete, as per specification no. FF-MFP/SSC/DP
197	Supplying, erecting, testing & commissioning of fire pump control panel (FCP) of cubical construction, floor mounted type, fabricated from minimum 2 mm thick CRCA sheet, compartmentalised with hinged lockable doors, with enclosure protection class IP54, duly powder coated or painted with accessories duly painted with two coats of synthetic enamel paint of fire red colour over a coat of primer (ISC code 536 as per IS 2932 of 2003), cable alley, interconnection with suitable size solid copper busbar strip of adequate size for all power connections having switchgears and accessories, mountings and internal wiring with adequate size copper conductor cable, earth terminals, numbering etc. complete in all respect, suitable for satisfactory operation of main fire pump and jockey (pressurisation) pumps (1working+1standby) with necessary accessories, wiring & cabling along with allied accessories with following incoming and outgoings, suitable for automatic & manual operation on 415V, 3 phase, 50Hz ac supply as per specificationsthe capacity of electric motor driven pump are as followsa. Main fire pump(MFP) having capacity of 22kW 1no (1 working)b. Jockey pump(JP) capacity of suitable capacity 2 nos(1 working +1 standby, alternate run per start in auto mode)comprises of the following features & switchgears:1. Main incomer FP SFU having rotary handle with HRC fuses of suitable rating.2. Electrolytic grade copper strips for busbar of suitable sizes for main incomer and branches to motor SFU\"s, starters & outgoing terminals with necessary accessories like stainless steel nut bolts with spring washers for connections, mounted on required no of epoxy or porcelain support insulators of suitable ratings etc.3. Individual pump TPN SFU having rotary handlewith HRC fuses of suitable rating. 4. Digital voltmeter & ammeter & RYB indicating lamps & push buttons & SPP, O/L & phase reversal protection with emergency stop switch.5. TPN SPD 100kA Type 1 +2 tested.6. Required pressure transducer with pressure indication on panel with cabling required for monitoring & automatic operation of fire pumps.7. System controller to control operation of main electric fire pump, jockey (pressurization) pumps in sequence with interlocking for operation of pumps as perspecification with automatic/manual operation with selector switch & alternate run of standby Pumps consisting of relays, timers. sensors, annunciation window for fault indication, complete as per specification.8. Suitable capacity electric motor starters for all individual pumps with necessary push buttons & indications.9.Siren of required capacity to be activated when main pump starts & allied accessories as per requirements of local CFO or as directed by engineer in charge.10.Danger board as per IS.11.Spare HRC fuses minimum 2nos of each individual rating with required bakelite fuse holder for main & jockey fire pumps MFP=(1working), JP = (1working+1standby, alternate run per start in auto mode) complete panel, asper specification no. FF-MFP/ECP . Basic price ( 13-5-1) 182320+(A-5) For main electric motor driven fire hydrant system pump of 75kW capacity & relevant capacity jockey pump add Rs…. 99983 ( For Main pump for 75kw) +(B-6) For main electric motor driven fire sprinkler system pump of 75kW capacity (1Working) & relevant capacity jockey pumps (1working+1standby, alternate run per start in auto mode,add Rs…. 304846 +(D) For addition of standby main diesel engine driven fire pump (1 standby), add as follows in the basic cost of Item no 13-5-1 towards required 12/24 v battery charger and diesel engine starter along with necessary accessories, indicators etc. with necessary interlocking and updation of control logic with interlocking for operation of pumps MFP for main (1working+1standby mode) & jockey fire pumps (1working+1standby, alternate run per start in auto mode) , add Rs.......The control for diesel engine comprises of automatic/manual selector switch & 3 attempts starting device, timers and relays as required, push buttons, start/stop in manual mode indicating lamp for high/ low Lub. oil pressure, high water temp and engine on indication battery charger suitable for 12V/24 V DC with boost and trickle selector switch, 0-30 V DC voltmeter, and 0-20 A DC ammeter with all standard relays and accessories required for automatic operation of diesel engine with interlocking for operation of main fire pumps Rs68381 Total =655530
198	For addition of booster pump for fire hydrant/sprinkler, add as follows in the basic cost of item no 13-5-1 towards necessary accessories, indicators etc. with necessary interlocking and updation of control logic.....for 5.5/ 7.5 kW centrifugal type booster pump 1no(1working) , add Rs…....
199	Supplying anderecting100 mm dia Cast Iron end line strainer of Y-type flanged end pattern, PN16 pressure rating, SS screen, end connection with Flanged / Screwed / Socket Weld / Butt Weld End etc with standard OAR (open area Ratio) forpositive suction complete asper specification no. FF-VL/ELS( 2 nos for jockey pump + 2 nos for booster pump=4 Nos.
200	Supplying anderecting200 mm dia Cast Iron end line strainer of Y-type flanged end pattern, PN16 pressure rating, screen of SS end connection with Flanged / Screwed / Socket Weld / Butt Weld End etc with standard OAR (open area Ratio) for positive suction complete asper specification no. FF- VL/ELS ( 1 nos main pump+1 nos forsprinkler pump+ 1 for disel pump= 3 Nos).
201	Supplyinganderecting100mm dia.cast iron double flange sluicevalvecompletewith PN16 pressure rating, asper specification no. FF-VL/SV
202	Supplyinganderecting200mm dia.cast iron double flange sluicevalvecompletewith PN16 pressure rating, asper specification no. FF-VL/SV
203	Supplying and erecting 50 mm dia. cast iron double flange butterfly valve of size complete with PN16 pressure rating, asper specification no. FF-VL/BFV
204	Supplying & erecting cast iron double flange butterfly valve of size 75/80 mm dia. completeasper specification no. FF-VL/BFV
205	Supplying & erecting cast iron double flange butterfly valve of size 100 mm dia. completeasper specification no. FF-VL/BFV
206	Supplying & erecting cast iron double flange butterfly valve of size 150 mm dia. completeasper specification no. FF-VL/BFV
207	Supplying & erecting cast iron double flange butterfly valve of size 200 mm dia. completeasper specification no. FF-VL/BFV
208	Supplying and erecting cast iron double flange ball type NRV of size 75mm/80 mm dia complete asper specification no. FF- VL/NRV
209	Supplying and erecting cast iron double flangeball type NRV of size 100 mm dia complete as per specification no. FF-VL/NRV
210	Supplying and erecting cast iron double flangeball type NRV of size 150 mm dia complete as per specification no. FF-VL/NRV
211	Supplying and erecting cast iron double flangeball type NRV of size 200 mm dia complete as per specification no. FF-VL/NRV
212	Supplying&erectinggunmetal gatevalve of size25 mmdia complete asperspecification no. FF-VL/GV
213	Supplying and installing air vessel of 300 mm dia1.5min heightM.S.tank installed inside pump house / on terrace complete asper specification no. FF-FFA/ACT(1 nos for hydrant + 1 nos for sprinkler= 2 nos).
214	Supplying and erecting 20/25mm dia gun metal air release cock, with necessary G.I. coupling to be fitted on top of air vessel or on wet riser complete asper specification no.FF-FFA/ARV (7no. For Riser + Two for Air Vessel= 9 nos.
215	Supplying and erecting 100 mm dia. pressure gauge , 0-300 PSI or 0-14 kg per cm square fitted with 12/15 mm dia. pad cock valve, erected with provided G.I. pipe, elbow etc. complete asper specification no. FF-FFA/PG
216	Supplying and erecting12/15 mm dia pressureswitchwith provided isolation valve, G.I. nipple, elbow, etc complete as perspecification no. FF-FFA/PS
217	Carrying out core cutting of size 3\" to 5\" dia x 15\" length in the C.C./rock/stone wall with the help of specialized core cutting machine inproper manner and finishing the site as original.
218	Making trench in Hard murum/Tar road having 0.75 m depth and minimum 0.3m width as per IS for laying provided cables uptovoltage level1.1Kv cable complete as per specification No. CW-EXN-CTR
219	Making cement concrete foundation in 1:2:4 cement concrete with foundation bolts and nuts complete ( cost of wooden box is included) for pumps(1.2x 1.2 x0.8)= 1.15 x 5 = 5.76 cum for overhead tank foundation (1.8 x 1.8 x 0.3)=0.972 x 5=4.86 cum total (6.9+5.82)= 10.62 Cu-M. For Hydrant Line Pedastal of size 1.2 m X 0.6 m X 0.6 m = 0.432 cum per pedastal , total terrace overhead ring line length 720 m /pedastal support will be at 4 m each ,hence total qty would be - 80/4 = 20 Nos ,so 20 X 0.432 = 8.68 cum ( pump foundation 10.62 cum + Pedastal 8.68 cum =19.3 cum total)
220	Supply,Instlaation,testingzincaluminite fire water storage tank having capacity 20 KL having structreaboce ground which gives positive suction to fire Pumps. The tank shall include all civil work including site prepartion , excavation , PCC which can load of tank including of 100% water.( for booster pump as per NBC).
221	Supplying and erecting iron, sheet metal work consisting of CRCA sheets, various sections of iron, plates, chequered plates, rods, bars,MSpipes,etc. forpanel board or any other purpose with bending, cutting, drilling and welding completeerectedatthe position with necessary materials duly paintedwith one coat of red oxide and two coats of enamelpaint to match theswitchgears or as per directions by the authority ( separate Iron work calculation sheet attached).
222	Supplying anderectingstainless steel single outlet hydrant valve fitted with necessary accessories complete asper specification no. FF-VL/HV.
223	Supplying and installing wall mounting swinging hose reel drum fitted with 19 mm dia. 30m long high pressure polypropylene(Polyhose)along with necessary accessories complete asper specification no. FF-FFA/HV
224	Supplying fire fighting reinforced rubber lined (R.R.L.) hose pipe, 63mm dia, 15m inlength, fitted with necessary accessories complete asper specification no. FF-FFA/RRL
225	Supplying & erecting stainless steel branch pipe 63 mm dia fitted with 20 mm dia detachable hexagonal nozzlecomplete as per specifications no. FF-FFA/NZ
226	Supplying and erecting brass orifice plate having 6 mm. thickness, 140 mm outer dia with required diameter of inner hole at everysingle outlet hydrant valve as per specification no. FF-FFA/OP (For Internal Hydrant).
227	Supplying and erecting M.S./CRCA cabinet for housing single hydrant valveof size ( 400 x 400 x 400)mm or hose pipe box of size ( 600 x 600 x 200)mmmade from min. 1.5 mm thick CRCA sheet with angle iron work of min. of size (25 x 25 x 4) mmhaving front doors with viewing glass of size (200x150) mmandlockingarrangement with necessary fixing material such as rubber biddingetc. dulypainted in post box red colour( Code 538 of IS 5)
228	Supplying and erecting G.I. pipe above ground of ‘C’ class ERW of size 25 mm dia with necessary fittings complete asperspecification no. FF-PP
229	Supplying and erecting G.I. pipe above ground of ‘C’ class ERW of size 50 mm dia with necessary fittings complete asperspecification no. FF-PP
230	Supplying and erecting G.I. pipe above ground of ‘C’ class ERW of size 65 mm dia with necessary fittings complete asper specification no. FF-PP
231	Supplying and erecting G.I. pipe above ground of ‘C’ class ERW of size 75/80 mm dia with necessary fittings complete asper specification no. FF-PP
232	Supplying and erecting G.I. pipe above ground of ‘C’ class ERW of size 100 mm dia with necessary fittings complete asperspecification no. FF-PP
233	Supplying and erecting G.I. pipe above ground of ‘C’ class ERW of size 150 mm dia with necessary fittings complete asper specification no. FF-PP
234	Supplying and erecting G.I. pipe above ground of ‘C’ class ERW of size 200 mm dia with necessary fittings complete asper specification no. FF-PP
235	Supplying&erectinggunmetal gatevalve of size20 mmdia complete asper specification no. FF-VL/GV
236	Supplying&erectinggunmetal gatevalve of size25 mmdia complete asper specification no. FF-VL/GV
237	Supplying and installing corrugated SS flexible conduit of size 25mm dia for connecting sprinkler head with necessary fittings as per specifications having 1000mmlong with UL/FM
238	Supplying, erecting, testing and commissioning of quartzoid bulb sprinkler, 15 mm (½\") dia. NBCM Body chrome finished, 68º C fixed temperature rating with deflectordisc of conventional construction complete as per specification no. FF-SPR.
239	Supplying, erecting, testing and commissioning of horizontal sidewall quartzoid bulb sprinkler, 15 mm (½\") dia quartzoid bulb. NBCM Body chrome finished, 68º C fixed temperature rating with deflector disc of conventional construction complete as per specification no. FF-SPR/SS
240	Supplying and erecting fire resistant mortar (20 kg) with fire resistance class S90 as per National Electrical Code (NEC) SP30-2011 suitable to seal the openings of all kinds of cables, pipes and cable support system in steel, aluminium and plastic profiles ( except hollow core conductors). The residual openings shall be closed with filler, as per specification no FF-FRM. Note :- For estimating purpose consider 1 bag of 20kg to cover 300mm x 400mm area 150mm thick or 0.018 m3. ( Approx 780 rooms in Hospital, Each rooms having Fire sprinkler and other utility opening ,hence conidered one 20 kg bag per room. Total Set Required ( 300 X 400 X 150 = 1 room X 30 =30 Nos)
241	Supplying, installation, testing and commissioning of micro processor based intelligent addressable main fire alarm panel, central processing unit with the 4 loop capacity and capable of supporting upto 250 devices and detectorsper loop,with on-board LCD display with min 16 lines of text, operating at 230 V 50 HZ - AC with inbuilt Battery Backup of a minimum 24 hours in normal condition and 30 min in alarm condition, suitable provision for network connectivity, interfacing with third party equipmentvia a MODBUS/ OPC/ L-ON interface etc. conforming to IS 15908:2021,,IS 2189: 2008, EN 54 & VDS / FM/UL864 (10th edition)with 3 years replacement warranty FF-AFAS/CP.
242	Supplying, installing, testing and commissioning ofrepeater panel with suitable battery backup of a minimum of 24 hours in normal condition and 30 min in alarm condition, 80 backlit alphanumeric LCD display with inbuilt buzzer to indicate fault/fire alarm, manual control keys for silence/mute and to reset the FACP from the repeater station. Panel size shall not more than 175 x 275 x 65 mm conforming to EN 54 orUL approvedwith 3 years equipment replacement warranty FF-AFAS/RP
243	Supplying, installing, testing and commissioning of addressable optical smoke detector, single/twin LED’s with 360 degree view, suitable for low voltage 15 to 32 V DC two wires supply, in-built locking mechanism to check the removal and pilferage of the detector, in built isolation mode, start up current 300µA and alarm condition current shall be maximum 6.5 mA, operating temperature 0°C to 50°C, humidity 0-95% RH, IP 41, conforming to IS 2189: 2008, 11360_1985_Reff2020 EN 54 or ULApproved with 3 years equipment replacement warranty FF-AFAS/SD
244	Supplying, installing, testing and commissioning of intelligent addressable thermal/heat detector with rate of rise cum fixed temperature thermistor complete with base as required, suitable for temperature variations from -20°C to 38°C for fixed-heat and rate-of-rise type detectors and 0°C to 66°C for high heat type detectors, in built isolation mode, suitable for offices/ceiling cable trenches/less ventilation area\"s etc. with 3 years equipment replacement warrantyIS : 2175 - 1988 reaffirmed 2000,IS 15908:2021standards FF-AFAS/SD.
245	Supplying, installing, testing and commissioning of addressable manual call points ( break glass type/pull station type), made of addressable break glass plastic square in shape surface/flush mounted with \"Break Glass\" massage embedded on the glass, complete erected with mounting base and required accessories conforming to EN 54 or UL listedwith 3 years equipment replacement warranty FF-AFAS/MCP.
246	Supplying, installing, testing and commissioning of addressable fire control/relay module complete as required, with 3 years equipment replacement warranty conforming to IS 5051Part 2 (Sec 1 to 3) : 1982 reed relays,EN 54 or UL Listed FF- AFAS/CRM
247	Supplying, installing, testing and commissioning of addressable fire monitor module complete as required. EN 54 or UL Listed with 3 years equipment replacementwarranty conforming toIS 5051Part 2 (Sec 1 to 3) : 1982 Reed relaysFF-AFAS/MM
248	Supplying, installing, testing and commissioning of addressable fire isolator module complete as required.EN 54 /FM or UL Listed with 3 years equipment replacement warranty conforming to IS5051Part 2 (Sec 1 to 3) : 1982 Reed relays FF-AFAS/ISM
249	Supplying, installing, testing and commissioning of addressable horn cum strobe sound/ hooter, output frequency 500 to 1000 Hz with dB as per Chart given in IS 15908:2021, with flashing at 1 Hz over the strobe’s entire operating voltage rangeEN 54, conforming to IS 2189: 2008, IS 15908:2021standards with 3 years equipment replacement warranty FF-AFAS/SSH.
250	Supplying, installing, testing and commissioningFR, XLPE armouredcable 2 core 1.5 sq.mm. copper conductor complete erected on wall/ ceiling complete asper specification no. CB-LT/CU
251	Supplying, installing, testing and commissioningFR, XLPE armouredcable 8 core 1.5 sq.mm. copper conductor complete erected on wall/ ceiling complete asper specification no.CB-LT/CU
252	Supplying, erecting, testing and commissioning 120 W amplifier suitable to operate on 230VoltsA.C. / 12VoltsD.C. supply complete asper specification no. FF- PA/AFR
253	Supplying, erecting, testing and commissioning 15 to 30 Watts sound column or ceiling mounted complete asper specification no. FF-PA/SOC
254	Supplying, erecting, testing and commissioning stand mounted/handheld type wired microphone having 2 mV/Pa sensitivity, impedance level limit 300 ohms and 50 - 16000 Hz suitable to operate in -10 deg C to +55 deg C with min. 7 metre shielded cable and 3 Pin Professional XLR Connector, stereo jack complete asper specification no.FF- PA/MIC
255	Supplying, erecting, testing and commissioningrust free microphone floor stand of chrome plating/powder coating orS.S. material , 500 mm to 1500 mmheight and sturdy mechanism ensuring trouble free movement complete.
256	Supplying, erecting, testing and commissioning of 2 core shielded sound cable complete asper specification no.FF- PA/MCC
257	Supplying & erecting Carbon Dioxide (CO2) fire extinguisher of 4.5 kg. capacity cartridge type conform to IS 2878 /15683 complete erected with necessary clamp made from 50 x6 mm. M. S. flat with nut & bolts routed in wall complete.
258	Supplying and erecting 4 kg clean agent gas Nitrogen pressurised controllable dicharge mechanism, pressure guage, Discharge hose and nozzle epoxy polyster powder coated as per IS 15683 ISI mark fire extinguisheroperating temperature (-)20 to (+)55 C kg capacity suitable for A,B,C class of FIRE complete.
259	Supplying and erecting DCP Type 25 kg capacity trolley Mounted with controllable dicharge mechanism, pressure guage, Discharge hose and nozzle epoxy polyster powder coated as per IS 15683 ISI mark fire extinguisheroperating temperature (-)20 to (+) 55 C kg capacity suitable for A,B,C class of FIRE complete.
260	Supplying and erecting of fire Exit & Eire Exinguishersignlge Indicating the floor- numtber in words &syslem(Fire Exiinguisher& Accessories ) (Non CSRApproved by S.E.Office ,mumbaivide T.S letterno- 108Date- 13/01/2022 )
261	Supplying , Installation , Testing And Commissioning of Hinged Metal fire door 120 min fire rated un insulated single 50mm THK Honey Comb Infill single double RBT 143 x 57mm frame Straight with anchor fast erness frame 1.0 & shutter 0.9 mm powder coated to ral shade SFP SS Ball bearing 4\" x 3\" x 3\"mm hionghed for steel doors ingersoll rand briton 121, NCE. SES Door closer size 3 with standard ARM , sprayed silver finish SFP SS sashlock with 70mm back set and 24 mmfor end , SS lever handle 22x 125 mm on rose , Euro profile cylinder 70 mm with both side key 29 SS strike plate Escutchenosschott pyran fire rated clear Glass 6mm thick 240 x 340 33 Hinged Metal Fire Door 120 min fire Rated
262	Supplying and erecting PVC trunking (PVC casing-n-capping)ofsize25 mm with accessorieson wall/ceiling as per specification No: WG-MA/CON.
263	Supplying and erectingHMS PVC conduit FRLS grade 25 mm dia. with necessary accessories in wall/floor with chiselling appropriately as per specification No: WG- MA/CC.
264	Supplying and erecting mains with 2x4 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW
265	Supplying and erecting mains with 1x4 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW
266	Supplying and erecting mains with 2x1.5 sq.mm FRLSHcopperPVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW
267	Supplying and erecting mains with 1x1.5 sq.mm FRLSHcopperPVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW
268	Supplying and erecting mains with 2x2.5 sq.mmFRLSH copper PVC insulated wire laid in provided conduit/trunking/insidepole/Bus bars or any other places. as per specification No: WG-MA/BW
269	Supplying and erecting mains with 1x2.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/insidepole/Bus bars or any other places. as per specification No: WG-MA/BW
270	Point wiring for light/fan/bell in 20 mm FRLS grade HMS PVC conduit with 1.5 sq.mm (2+1E) FRLSH grade copper wire with flush type switch and requiredaccessories as per specification No: WG-PW/SW
271	Point wiring for light/bell/exhaust fan in 20 mm FRLS grade HMS PVC conduit with 1.5 sq.mm (2+1E) FRLSH grade copper wire, modular type switch, earthing and requiredaccessories as per specification No: WG- PW/SW.
272	Point wiring for independent plug in 20 mm FRLS grade HMS PVC conduit with 1.5 sq.mm (2+1E ) FRLSH grade copper wire, modular type switch,earthing and required accessories as per specification No: WG-PW/SW
273	Supplying and erecting single pole and neutral distributionboard (SPNDB), with 2 ways for incoming and 6 ways (6 poles) for outgoing SP MCBs, with door, 1.2mmthickness surface / flush mounted, IP 43 Protection on iron / GI frame as per specification no. SW-SWR/MCBDB
274	Supplying & erecting inverter LED batten 20W tube light fitting with polycarbonate housing, heat sink, integrated HF electronic driver, Min. 2600 mAhLithium ion Battery with charging time of 8-10 Hours and backup time of Min. 3 hrs. with minimum 25% of initial Watts having luminous efficacy of 100 lumen/watt, CRI>80, CCT of 6500K and THD<=20% having useful life of minimum 25000 hrs. with overheating protection with 2 years warranty.
275	Supplying and erecting fresh air cum exhaust fan of light duty 250 V A.C. 50 cycles300mm. 1400 RPM rust proof body & blades, wire mesh, duly erected, complete.
276	Supplying and erectingmodular type switch 16Aduly erected on provided plate and boxwith wiring connections complete.
277	Supplying and erectingmodular type 3 pin 6 / 16Amultisocket with safety shutter,dulyerected on provided plate and box with wiring connections complete.
278	Supplying and erecting PVC Surface modular switch box with double mounting plate for 3module duly erected.
279	Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 95sq. mm. aluminium conductor completeerected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipeas per specification no. CB-LT/AL
280	Supplying, erecting &terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½ core 300 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipeas per specification no. CB-LT/AL(main incoming cable to main fire panel).
281	Supplying, erecting& terminatingFR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 4 sq. mm. copperconductor completeerected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipeas per specification no. CB-LT/CU(for booster Pump)
282	Supplying, erecting& terminatingFR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 6 sq.mm. copperconductor completeerected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipeas per specification no. CB-LT/CU
283	Supplying & laying (including excavation) reinforced cement concrete pipe of IS 458:2003 NP-2 class of 150 mm internal diameter in proper line, level and slope including providing and fixing collars in cement mortar 1:2 and curing etc. complete.
284	Providing & erecting 3 Pole MCCB 415V, 400A, rated short-circuit breaking capacity 36 kA (Ics=100% of Icu), adjustable thermal (overload) setting and adjustable magnetic setting with provided leads, provision for installation of shunt/ UV/ trip alarm contact and MCCB should have phase barriers both sides, with insulation withstand capacity 800V, no line-load bias in provided enclosure /panel as per specification no. SW- SWR/MCCB. Note : For use of 4 pole MCCBs in place of 3 pole MCCBs add 20% in rate of 3 pole MCCB. Hence 18563 X 20%= 3712.60/-
285	Supplying and laying (including excavation of suitable width & depth up to 90 cm) 146 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete.
286	Providing & erecting hot dipped galvanised ladder type cable tray manufactured from 16 SWG (1.6 mm thick) GI sheet of 150 mmwidth & 100 mm height comprising all required standard accessories.
287	Providing & erecting hot dipped galvanised ladder type cable traymanufactured from 16 SWG (1.6 mm thick) GI sheet of 300 mmwidth & 100 mm height comprising all required standard accessories.
288	Providing & erecting hot dipped galvanised ladder type cable traymanufactured from 16 SWG (1.6 mm thick) GI sheet of 400 mmwidth & 100 mm height comprising all required standard accessories.
289	Providing earthing with galvanized iron earth plate size 60 x 60 x 0.6 cm complete with all materials, testing & recording the results as per specification no. EA-EP (earthig schedule: 2 nos for each 2 nos main fire pump for hydrant and sprinkler , 2nos for each 2 nos jockey pump for sprinkler and hydrant , 1 nos for main fire panel and 1 nos for disel enginepump).= total 6 nos of earthing.
290	Supplying and erecting GI strip of required size used for earthing on wall and/or any other purpose with necessary GI clamps fixed on wall painted with bituminous paint in an approved manner with joints required. As perspecification no EA-EP.(25x5) (1kg/m x 60 m=60 kg)
291	Supplying, installation, testing and commissioning ofmain fire pump(MFP / EP) suitable for water discharge of 2280 to 2850 LPM at 120 to 90 m head driven by electric motor 415 volts, 3 phase 50 Hz, AC supply of 75kW or of suitable kW capacity for manual/automatic operation and consisting of following :(a) Horizontal type, single stage, centrifugal/split casing pump of cast iron body & bronze impeller with stainless steel shaft(SS410 grade), mechanical seal conforming to IS 1520.(b) Squirrel cage induction motor, TEFC, synchronous speed 3000 RPM, suitable for operation with IP 55 protection for enclosure, horizontal foot mounted type with Class-\"F\" insulation, conforming to IS-325.(c) M.S. fabricated common base plate, coupling, coupling guard, foundation bolts etc. as required.(d) Erected on provided suitable size cement concrete foundation duly plastered with anti vibration pads with perfect aligning, proper levellingcomplete pump set with accessories duly painted with two coats of synthetic enamel paint of fire red colour over a coat of primer (ISC code 536 as per IS 2932 of 2003) complete, asper specification no. FF- MFP/SSC/EP
292	Supplying, installation, testing and commissioning of jockey fire pump (JP) suitable for water discharge of 180 to 240 LPM at 110 to 90 m head driven by electric motor415 volts, 3 phase 50 Hz, AC supply of 11 kW or of suitable kW capacity for manual/automatic operation and consisting of following :(a) Horizontal/vertical type, multi stage, centrifugal casing pump of cast iron body & bronze impeller with stainless steel shaft (SS410 grade), mechanical seal conforming to IS 1520.(b) Squirrel cage induction motor, TEFC, synchronous speed 3000 RPM, suitable for operation with IP 55 protection for enclosure, horizontal foot mounted type with Class-\"F\" insulation, conforming to IS-325.(c) M.S. fabricated common base plate, coupling, coupling guard, foundation bolts etc. as required.(d) Erected on provided suitable size cement concrete foundation duly plastered with anti vibration pads with perfect aligning, proper levelling complete pump set with accessories duly painted with two coats of synthetic enamel paint of fire red colour over a coat of primer (ISC code 536 as per IS 2932 of 2003) complete, asper specification no. FF-MFP/JP
293	Supplying, installation, testing and commissioning of main fire pump (MFP/DP) suitable for water discharge of 2280 to 2850 LPM at 120 to 90 m head driven by 110 HP or suitable HP capacity diesel engine at required working speed suitable for automatic operation and consisting of following :(a) Horizontal type, single stage, centrifugal casing pump of cast iron body & bronze impeller with stainless steel shaft(SS410 grade), mechanical seal conforming to IS 1520.(b) Water cooled with radiator, diesel engine conforming to relevant IS standard complete with auto starting mechanism, 12/24 volts DC electric starting equipment with battery of required AH capacity with necessary charger suitable to work on 230v, 50Hz AC supply, diesel tank of minimum 150ltr capacity with first filling of diesel up to 100% level with necessary piping with valves up to engine , exhaust pipe extended up to 10 m outside pump house duly insulated with 50 mm thick glass wool with 1.0 mm thick aluminium sheet cladding, residential silencer, instruments and protection as per standard specification, stop solenoid for auto stop in the event of fault with audio indications etc. as required.(c) M.S. fabricated common base plate, coupling, coupling guard, foundation bolts etc. as required.(d) Erected on provided suitable size cement concrete foundation duly plastered with anti vibration pads with perfect aligning, proper levelling complete pump set with engine assembly and accessories duly painted with two coats of synthetic enamel paint of fire red colour over a coat of primer (ISC code 536 as per IS 2932 of 2003) complete, as per specification no. FF-MFP/SSC/DP
294	Supplying, erecting, testing & commissioning of fire pump control panel (FCP) of cubical construction, floor mounted type, fabricated from minimum 2 mm thick CRCA sheet, compartmentalised with hinged lockable doors, with enclosure protection class IP54, duly powder coated or painted with accessories duly painted with two coats of synthetic enamel paint of fire red colour over a coat of primer (ISC code 536 as per IS 2932 of 2003), cable alley, interconnection with suitable size solid copper busbar strip of adequate size for all power connections having switchgears and accessories, mountings and internal wiring with adequate size copper conductor cable, earth terminals, numbering etc. complete in all respect, suitable for satisfactory operation of main fire pump and jockey (pressurisation) pumps (1working+1standby) with necessary accessories, wiring & cabling along with allied accessories with following incoming and outgoings, suitable for automatic & manual operation on 415V, 3 phase, 50Hz ac supply as per specificationsthe capacity of electric motor driven pump are as followsa. Main fire pump(MFP) having capacity of 22kW 1no (1 working)b. Jockey pump(JP) capacity of suitable capacity 2 nos(1 working +1 standby, alternate run per start in auto mode)comprises of the following features & switchgears:1. Main incomer FP SFU having rotary handle with HRC fuses of suitable rating.2. Electrolytic grade copper strips for busbar of suitable sizes for main incomer and branches to motor SFU\"s, starters & outgoing terminals with necessary accessories like stainless steel nut bolts with spring washers for connections, mounted on required no of epoxy or porcelain support insulators of suitable ratings etc.3. Individual pump TPN SFU having rotary handle with HRC fuses of suitable rating.4. Digital voltmeter & ammeter & RYB indicating lamps & push buttons & SPP, O/L & phase reversal protection with emergency stop switch.5. TPN SPD 100kA Type 1 +2 tested.6. Required pressure transducer with pressure indication on panel with cabling required for monitoring & automatic operation of fire pumps.7. System controller to control operation of main electric fire pump, jockey(pressurization) pumps in sequence with interlocking for operation of pumps as per specification with automatic/manual operation with selector switch & alternate run of standby Pumps consisting of relays, timers. sensors, annunciation window for fault indication, complete as per specification.8. Suitable capacity electric motor starters for all individual pumps with necessary push buttons & indications.9.Siren of required capacity to be activated when main pump starts & allied accessories as per requirements of local CFO or as directed by engineer in charge.10.Danger board as per IS.11.Spare HRC fuses minimum 2nos of each individual rating with required bakelite fuse holder for main & jockey fire pumps MFP=(1working), JP = (1working+1standby, alternate run per start in auto mode) complete panel, asper specification no. FF-MFP/ECP . Basic price ( 13-5-1) 182320+(A-5) For main electric motor driven fire hydrant system pump of 75kW capacity & relevant capacity jockey pump add Rs…. 99983 ( For Main pump for 75kw) +(B-6) For main electric motor driven fire sprinkler system pump of 75kW capacity (1Working) & relevant capacity jockey pumps (1working+1standby, alternate run per start in auto mode,add Rs…. 304846 +(D) For addition of standby main diesel engine driven fire pump (1 standby), add as follows in the basic cost of Item no 13-5-1 towards required 12/24 v battery charger and diesel engine starter along with necessary accessories, indicators etc. with necessary interlocking and updation of control logic with interlocking for operation of pumps MFP for main (1working+1standby mode) & jockey fire pumps (1working+1standby, alternate run per start in auto mode) , add Rs.......The control for diesel engine comprises of automatic/manual selector switch & 3 attempts starting device, timers and relays as required, push buttons, start/stop in manual mode indicating lamp for high/ low Lub. oil pressure, high water temp and engine on indication battery charger suitable for 12V/24 V DC with boost and trickle selector switch, 0-30 V DC voltmeter, and 0-20 A DC ammeter with all standard relays and accessories required for automatic operation of diesel engine with interlocking for operation of main fire pumps
295	Supplying anderecting100 mm dia Cast Iron end line strainer of Y-type flanged end pattern, PN16 pressure rating, SSscreen, endconnection with Flanged / Screwed / Socket Weld / Butt Weld End etc with standard OAR (open area Ratio) for positive suction complete as per specification no. FF-VL/ELS ( 2 nos for jockey pump + 2 nos for booster pump=4 Nos.
296	Supplying anderecting200 mm dia Cast Iron end line strainer of Y-type flanged end pattern, PN16 pressure rating, screen of SS end connection with Flanged / Screwed / Socket Weld / Butt Weld End etc with standard OAR (open area Ratio) for positive suction complete as per specification no. FF- VL/ELS ( 1 nos main pump+1 nos for sprinkler pump+ 1 for disel pump= 3 Nos).
297	Supplyinganderecting100mm dia.cast iron double flange sluicevalvecomplete with PN16 pressure rating, asperspecification no. FF-VL/SV
298	Supplyinganderecting150mm dia.cast iron double flange sluicevalvecompletewith PN16 pressure rating, asper specification no. FF-VL/SV
299	Supplyinganderecting200mm dia.cast iron double flange sluicevalvecompletewith PN16 pressure rating, asper specification no. FF-VL/SV
300	Supplying and erecting 50 mm dia. cast iron double flange butterfly valve of size complete with PN16 pressure rating, asper specification no. FF-VL/BFV
301	Supplying & erecting cast iron double flange butterfly valve of size 75/80 mm dia. completeasper specification no. FF-VL/BFV
302	Supplying & erecting cast iron double flange butterfly valve of size 100 mm dia. completeasper specification no. FF-VL/BFV
303	Supplying & erecting cast iron double flangebutterfly valve of size 150 mm dia. complete asper specification no. FF-VL/BFV
304	Supplying & erecting cast iron double flange butterfly valve of size 200 mm dia. complete asper specification no. FF-VL/BFV
305	Supplying and erecting cast iron double flange ball type NRV of size 75mm/80 mm dia complete asper specification no. FF- VL/NRV
306	Supplying and erecting cast iron double flangeball type NRV of size 150 mm dia complete as per specification no. FF-VL/NRV
307	Supplying and erecting cast iron double flangeball type NRV of size 200 mm dia complete as per specification no. FF-VL/NRV
308	Supplying&erectinggunmetal gatevalve of size20 mmdia complete asper specification no. FF-VL/GV
309	Supplying&erectinggunmetal gatevalve of size25 mmdia complete asperspecification no. FF-VL/GV
310	Supplying and erecting 150 mm dia firebrigade header suitable for supplying water in fire tank complete asper specification no. FF-FA/FBC
311	Supplying and erecting fire brigade header ( Siamese connection ) of 150 mm dia, for supplying water in fire tank complete asper specification no. FF-FA/FMC
312	Supplying and installing air vessel of 300 mm dia1.5min heightM.S.tank installed inside pump house / on terrace complete asper specification no. FF-FFA/ACT(1 nos for hydrant + 1 nos for sprinkler= 2 nos).
313	Supplying and erecting 20/25mm dia gun metal air release cock, with necessary G.I. coupling to be fitted on top of air vessel or on wet riser complete asper specification no.FF-FFA/ARV.
314	Supplying and erecting 100 mm dia. pressure gauge , 0-300 PSI or 0-14 kg per cm square fitted with 12/15 mm dia. pad cock valve,erected with provided G.I. pipe, elbow etc. complete asper specification no. FF-FFA/PG
315	Supplying and erecting12/15 mm dia pressureswitchwith provided isolation valve,G.I. nipple, elbow, etc complete asperspecification no. FF-FFA/PS
316	Carrying out core cutting of size 3\" to 5\" dia x 15\" length in the C.C./rock/stone wall with the help of specialized core cutting machine inproper manner and finishing the site as original.
317	Making trench in Hard murum/Tar road having 0.75 m depth and minimum 0.3mtr width as per IS for laying provided cables uptovoltage level1.1Kv cable complete as per specification No. CW-EXN-CTR
318	Making cement concrete foundation in 1:2:4 cement concrete with foundation bolts and nuts complete ( cost of wooden box is included) for pumps(1.2x 1.2 x0.8)= 1.15 x 5= 5.76 cum for overhead tank foundation (1.8 x 1.8 x 0.3)=0.972 x 5=4.86 cum total(6.9+5.82)= 10.62 Cu-M. For Hydrant Line Pedastal of size 1.2 m X 0.6 m X 0.6 m =0.432 cum per pedastal , Total ring line length 2984 m /pedastal support will be at 4 m each,hence total qty would be - 2984/4 = 746 Nos,so 746 X 0.432 = 322.28 cum ( pump foundation 10.62 cum + Pedastal 322.28 cum= 332.9 cum total)
319	Supplying and erecting iron, sheet metal work consisting of CRCA sheets, various sections of iron, plates, chequered plates, rods, bars,MSpipes,etc. forpanel board or any other purpose with bending, cutting, drilling and welding completeerectedatthe position with necessary materials duly painted with one coat of red oxide and two coats of enamelpaint to match theswitchgears or as per directions by the authority ( separate Iron work calculation sheet attached).
320	Supplying anderectingstainless steel single outlet hydrant valve fitted with necessary accessories complete asper specification no. FF-VL/HV.
321	Supplying fire fighting reinforced rubber lined (R.R.L.) hose pipe, 63mm dia, 15m in length, fitted with necessary accessories complete as per specification no. FF-FFA/RRL
322	Supplying & erecting stainless steel branch pipe 63 mm dia fitted with 20 mm dia detachable hexagonal nozzlecomplete as per specifications no. FF-FFA/NZ
323	Supplying and erecting brass orifice plate having 6 mm. thickness, 140 mm outer dia with required diameter of inner hole at every single outlet hydrant valve as per specificationno. FF-FFA/OP (For Internal Hydrant).
324	Supplying and erecting M.S./CRCA cabinet for housingFloorHydrant valve,hosepipe, hosereeland branch pipe(size 1000 x 736 x 736 mm.) made from 16 SWG sheetand angle iron 25 x 25 x 4 mm. having front doors with viewing glass (8\"x6\") and locking arrangement with necessary fixing material such as rubber bidding etc. duly painted in post box red colour( Code 538 of IS 5)
325	Supplying and erectingG.I. pipe‘C’ classERW25 mm dia with necessary fittings complete asper specification no. FF-PP
326	Supplying and erectingG.I. pipe‘C’ classERW50 mm dia with necessary fittings complete asper specification no. FF-PP
327	Supplying and erecting G.I. pipe ‘C’ classERW75/80 mm dia with necessary fittings complete asper specification no. FF-PP
328	Supplying and erectingG.I. pipe‘C’ classERW100 mm dia with necessary fittings complete asper specification no. FF-PP
329	Supplying and erectingG.I. pipe‘C’ class ERW150 mm dia with necessary fittingscomplete asper specification no. FF-PP
330	Supplying and erectingG.I. pipe‘C’ class ERW200 mm dia with necessary fittingscomplete asper specification no. FF-PP
331	Providing coating of bitumen paint &4mm thick wrapping for underground 150 mm ringmain of fire fighting system.
332	Providing coating of bitumen paint & 4mmthick wrapping for underground 200 mm ring main of fire fighting system.
333	Supplying and erecting fire resistant mortar (20 kg) with fire resistance class S90 as per National Electrical Code (NEC) SP30-2011 suitable to seal the openings of all kinds of cables, pipes and cable support system in steel, aluminium and plastic profiles ( except hollow core conductors). The residualopenings shall be closed with filler, as per specification no FF-FRM.
334	Supplying & erecting Carbon Dioxide (CO2) fire extinguisher of 4.5 kg. capacity cartridge type conform to IS 2878 /15683 complete erected with necessary clamp made from 50 x 6 mm. M. S. flat with nut & bolts routed inwall complete.
335	Supplying and erecting of fire Exit & Eire Exinguishersignlge Indicating the floor-numtber in words &syslem(Fire Exiinguisher& Accessories
336	Making cement concrete foundation including excavation(60x 60x 150) cm deep in 1:3:6 cement concrete, (20 to 25) mm stone metalwith necessary curing and finishing complete.(for stay).
337	Supplying and erecting Gas Suppression system (Novec 1230-FK1230 Gas Suppression system with CCOE cylinder one no.32 liter capacity with filled Gas, Electrical,Manual,Nozzle and Gas Release panel with Smoke detector, as per Schedule-CSr No.43 specification.
338	Supplying and erecting PVC trunking (PVC casing-n-capping) of size 25 mm with accessorieson wall/ceiling as per specification No: WG-MA/CON.
339	Supplying and erecting mains with 3x2.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/insidepole/Bus bars or any other places as per specification No: WG-MA/BW
340	Supplying and erectingmodular type switch6A / 10A duly erected on provided plate and box with wiring connections complete.
341	Supplying and erectingmodular type 3 pin 6 / 16Amultisocket with safety shutter,dulyerected on provided plate and box with wiring connections complete.
342	Supplying and erecting PVC Surface modularswitch box with double mounting plate for 3 module duly erected.
343	Supplying and erecting iron, sheet metal work consisting of CRCA sheets, various sections of iron, plates, chequered plates, rods, bars,MSpipes,etc. forpanel board or any other purpose with bending, cutting, drilling and welding completeerectedatthe position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by theauthority ( separate Iron work calculation sheet attached).
344	Supplying, erecting& terminatingFR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 4 sq.mm. copperconductor completeerected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipeas per specification no. CB-LT/CU(for booster Pump)
345	Providing earthing with galvanized iron earth plate size 60 x 60 x 0.6 cm complete with all materials, testing & recording the results as per specification no. EA-EP (earthig schedule: 2 nos for each 2 nos main fire pump for hydrant and sprinkler , 2nos for each 2 nos jockey pump for sprinkler and hydrant , 1 nos for main fire panel and 1 nos for disel enginepump).= total 6 nos of earthing.
346	Supplying and erecting GI strip of required size used for earthing on wall and/or any other purpose with necessary GI clamps fixed on wall painted with bituminous paint in an approved manner with joints required. As per specification no EA-EP.(25x5) (1kg/m x 40m=40 kg)
347	Supplying, installation, testing and commissioning of booster fire pump [BP] suitable for water discharge of 900 LPM at 35 m head driven by electric motor 415 volts, 3 phase 50 Hz, AC supply of 7.5 kW or of suitable kW capacity for manual/automatic operation and consisting of following :(a) Horizontal/vertical type, single/multi stage, centrifugal casing pump of cast iron body & bronze/CI impeller with stainless steel shaft (SS410 grade), mechanical seal conforming to IS 1520.(b) Squirrel cage induction motor, TEFC, synchronous speed 3000 RPM, suitable for operation on with IP 55 protection for enclosure, horizontal foot mounted type with Class-\"F\" insulation, conforming to IS-325.(c) M.S. fabricated common base plate, coupling, coupling guard, foundation bolts etc. as required.(d)Erected on provided suitable size cement concrete foundation duly plastered with anti vibration pads with perfect aligning, proper levelling complete pump set with accessories duly painted with two coats of synthetic enamel paint of fire red colour over a coat of primer (ISC code 536 as per IS 2932 of 2003) complete, as per specification no. FF-MFP/BP
348	For addition of booster pump for fire hydrant/sprinkler, add as follows in the basic cost of item no 13-5-1 towards necessary accessories, indicators etc. with necessary interlocking and updation of control logic.....for 5.5/ 7.5 kW centrifugal type booster pump 1no(1working) , add Rs…....
349	Supplying and erecting G.I. pipe above ground of ‘C’ class ERW of size 25 mm dia with necessary fittings complete asper specification no. FF-PP
350	Supplying and erecting G.I. pipe above ground of ‘C’ class ERW of size 50 mm dia with necessary fittings complete asper specification no. FF-PP
351	Supplying and erecting G.I. pipe above ground of ‘C’ class ERW of size 65 mm dia with necessary fittings complete asper specification no. FF-PP
352	Supplying and erecting G.I. pipe above ground of ‘C’ class ERW of size 75/80 mm dia with necessary fittings complete asperspecification no. FF-PP
353	Supplying and erecting G.I. pipe above ground of ‘C’ class ERW of size 100 mm dia with necessary fittings complete asperspecification no. FF-PP
354	Supplying and erecting G.I. pipe above ground of ‘C’ class ERW of size 150 mm dia with necessary fittings complete asper specification no. FF-PP
355	Supplying anderecting100 mm dia Cast Iron end line strainer of Y-type flanged end pattern, PN16 pressure rating, SS screen, end connection with Flanged / Screwed / Socket Weld / Butt Weld End etc with standard OAR (open area Ratio) for positive suctioncomplete asper specification no. FF-VL/ELS
356	Supplyinganderecting100mm dia.cast iron double flange sluicevalvecomplete with PN16 pressure rating, asper specification no. FF-VL/SV
357	Supplying and erecting 50 mm dia. cast iron double flange butterfly valve of size complete with PN16 pressure rating, asper specification no. FF-VL/BFV
358	Supplying and erecting 75/80 mm dia. cast iron double flange butterfly valve of size complete with PN16 pressure rating, asper specification no. FF-VL/BFV
359	Supplying & erecting cast iron double flange butterfly valve of size 100 mm dia. completeasper specification no. FF-VL/BFV
360	Supplying & erecting cast iron double flangebutterfly valve of size 150 mm dia. complete asper specification no. FF-VL/BFV
361	Supplying and erecting cast iron double flange ball type NRV of size 100 mm dia complete as per specification no. FF-VL/NRV
362	Supplying&erectinggunmetal gatevalve of size25 mmdia complete asperspecification no. FF-VL/GV
363	Supplying anderectingstainless steel single outlet hydrant valve fitted with necessary accessories complete asper specification no. FF-VL/HV.
364	Supplying and installing wall mounting swinging hose reel drum fitted with 19 mm dia. 30m long high pressure polypropylene(Polyhose)along with necessary accessories complete asper specification no. FF-FFA/HV
365	Supplying fire fighting reinforced rubber lined (R.R.L.) hose pipe, 63mm dia, 15m in length, fitted with necessary accessories complete as per specification no. FF-FFA/RRL
366	Supplying & erecting stainless steel branch pipe 63 mm dia fitted with 20 mm dia detachable hexagonal nozzlecomplete as per specifications no. FF-FFA/NZ
367	Supplying and erecting 20/25mm dia gun metal air release cock, with necessary G.I. coupling to be fitted on top of air vessel or on wet riser complete asper specification no.FF-FFA/ARV (7no. For Riser + Two for Air Vessel= 9 nos.
368	Supplying and erecting 100 mm dia. pressure gauge , 0-300 PSI or 0-14 kg per cm square fitted with 12/15 mm dia. pad cock valve,erected with provided G.I. pipe, elbow etc. complete asper specification no. FF-FFA/PG
369	Supplying and erecting brass orifice plate having 6 mm. thickness, 140 mm outer dia with required diameter of inner hole at every single outlet hydrant valve as per specification no. FF-FFA/OP (For Internal Hydrant).
370	Supplying and erecting M.S./CRCA cabinet for housingFloorHydrant valve,hosepipe, hosereeland branch pipe(size 1000 x 736 x 736 mm.) made from 16 SWG sheetand angle iron 25 x 25 x 4 mm. having front doors with viewing glass (8\"x6\") and locking arrangement with necessary fixing material such as rubber bidding etc. duly painted in post box red colour( Code 538 of IS 5) (BoX for Two set of Hose Pipe along with 1set of Branch Pipe).
371	Supplying, installation, testing and commissioning of micro processor based intelligent addressable main fire alarm panel, central processing unit with the 4 loop capacity and capable of supporting upto 250 devices and detectorsper loop,with on-board LCD display with min 16 lines of text, operating at 230 V 50 HZ - AC with inbuilt Battery Backup of a minimum 24 hours in normal condition and 30 min in alarm condition, suitable provision for network connectivity, interfacing with third party equipment via a MODBUS/ OPC/ L-ON interface etc. conforming to IS 15908:2021,,IS 2189: 2008, EN 54 & VDS / FM/UL864(10th edition)with 3 years replacement warranty FF-AFAS/CP.
372	Supplying, installing, testing and commissioning ofrepeater panel with suitable battery backup of a minimum of 24 hours in normal condition and 30 min in alarm condition, 80 backlit alphanumeric LCD display with inbuilt buzzer to indicate fault/fire alarm, manual control keys for silence/mute and to reset the FACP from the repeater station. Panel size shall not more than 175 x 275 x 65 mm conforming to EN 54 or UL approvedwith 3 years equipment replacement warranty FF-AFAS/RP
373	Supplying, installing, testing and commissioning of addressable optical smoke detector, single/twin LED’s with 360 degree view, suitable for low voltage 15 to 32 V DC two wires supply, in-built locking mechanism to check the removal and pilferage of the detector, in built isolation mode, start up current 300µA and alarm condition current shall be maximum 6.5 mA, operating temperature 0°C to 50°C, humidity 0-95% RH, IP 41, conforming to IS 2189: 2008, 11360_1985_Reff2020 EN 54 or ULApproved with 3 years equipment replacement warranty FF-AFAS/SD
374	Supplying, installing, testing and commissioning of intelligent addressable thermal/heat detector with rate of rise cum fixed temperature thermistor complete with base as required, suitable for temperature variations from -20°C to 38°C for fixed-heat and rate-of-rise type detectors and 0°C to 66°C for high heat type detectors, in built isolation mode, suitable for offices/ceiling cable trenches/less ventilation area\"s etc. with 3 years equipment replacement warrantyIS : 2175 - 1988 reaffirmed 2000,IS 15908:2021standards FF-AFAS/SD.
375	Supplying, installing, testing and commissioning of addressable manual call points ( break glass type/pull station type), made of addressable break glass plastic square in shape surface/flush mounted with \"Break Glass\" massage embedded on the glass, complete erected with mounting base and required accessories conforming to EN 54 orUL listedwith 3 years equipment replacement warranty FF-AFAS/MCP.
376	Supplying, installing, testing and commissioning of addressable fire control/relay module complete as required, with 3 years equipment replacement warranty conforming to IS 5051Part 2 (Sec 1 to 3) :1982 reed relays,EN 54 or UL Listed FF- AFAS/CRM
377	Supplying, installing, testing and commissioning of addressable fire monitor module complete as required. EN 54 or UL Listed with 3 years equipment replacement warranty conforming toIS 5051Part 2 (Sec 1 to 3) : 1982 Reed relaysFF-AFAS/MM
378	Supplying, installing, testing and commissioning of addressable fire isolator module complete as required.EN 54 /FM or UL Listed with 3 years equipment replacement warranty conforming toIS5051Part 2 (Sec 1 to 3) : 1982 Reed relays FF-AFAS/ISM
379	Supplying, installing, testing and commissioning of addressable horn cum strobe sound/ hooter, output frequency 500 to 1000 Hz with dB as per Chart given in IS 15908:2021, with flashing at 1 Hz over the strobe’s entire operating voltage rangeEN 54, conforming to IS 2189: 2008, IS 15908:2021 standards with 3 years equipment replacementwarrantyFF-AFAS/SSH.
380	Supplying, installing, testing and commissioningFR, XLPE armouredcable 2 core 1.5 sq.mm. copper conductor completeerected on wall/ ceiling complete asper specification no. CB-LT/CU
381	Supplying, erecting, testing and commissioning 120 W amplifier suitable to operate on 230VoltsA.C. / 12VoltsD.C. supply complete asper specification no. FF- PA/AFR
382	Supplying, erecting, testing and commissioning15 to 30 Watts soundcolumn or ceiling mounted complete asper specification no. FF-PA/SOC
383	Supplying, erecting, testing and commissioning stand mounted/handheld type wired microphone having 2 mV/Pa sensitivity, impedance level limit 300 ohms and 50 - 16000 Hz suitable to operate in -10 deg C to+55 deg C with min. 7 metre shielded cable and 3 Pin Professional XLR Connector, stereo jack complete asper specification no.FF- PA/MIC
384	Supplying, erecting, testing and commissioningrust free microphone floor stand of chrome plating/powder coating orS.S. material , 500 mm to 1500 mm height and sturdy mechanism ensuring trouble free movement complete.
385	Supplying, erecting, testing and commissioning of 2 core shielded cablecomplete asper specification no.FF- PA/MCC
386	Supplying and installing corrugated SS flexible conduit of size 25mm dia for connecting sprinkler head with necessaryfittings as per specifications having 1000mm long with UL/FM
387	Carrying out core cutting of size 3\" to 5\" dia x 15\" length in the C.C./rock/stone wall with the help of specialized core cutting machine inproper manner and finishing the site as original.
388	Supplying, erecting, testing and commissioning of quartzoid bulb sprinkler, 15 mm (½\") dia. NBCM Body chrome finished, 68º C fixed temperature rating with deflector disc of conventional construction complete asper specification no. FF-SPR.
389	Supplying, erecting, testing and commissioning of horizontal sidewall quartzoid bulb sprinkler, 15 mm (½\") dia quartzoid bulb. NBCM Body chrome finished, 68º C fixed temperature rating with deflector disc of conventional construction complete asper specification no. FF-SPR/SS
390	Supplying and erecting fire resistant mortar (20 kg) with fire resistance class S90 as per National Electrical Code (NEC) SP30-2011 suitable to seal the openings of all kinds of cables, pipes and cable support system in steel, aluminium and plastic profiles ( except hollow core conductors). The residual openings shall be closed with filler, as per specification no FF-FRM. Note :- For estimating purpose consider 1 bag of 20kg to cover 300mm x 400mm area 150mm thick or0.018 m3. ( Total 108 rooms in Hospital, Each rooms having Fire sprinkler and other utility opening ,hence conidered one 20 kg bag per room. Total Set Required ( 300 X 400 X 150 =1 room X 38 =38 Nos)
391	Making trench in Hard murum/Tar road having 0.75 m depth and minimum 0.3m width as per IS for laying provided cables uptovoltage level1.1Kv cable complete as per specification No. CW-EXN-CTR
392	Making cement concrete foundation in 1:2:4 cement concrete with foundation bolts and nuts complete ( cost of wooden box is included) for pumps for pump (1.2x 1.2 x0.8)= 1.15 x 6 = 6.9 cum for overhead tank (1.8 x 1.8 x 0.9)=2.91 x 2= 5.82 cum total(6.9+5.82)= 12.72 Cu-M
393	Supplying & erecting Carbon Dioxide (CO2) fire extinguisher of 4.5 kg. capacity cartridge type conform to IS 2878 /15683 complete erected with necessary clamp made from 50 x 6 mm. M. S. flat with nut & bolts routed inwall complete.
394	Supplying and erecting 4 kg clean agent gas Nitrogen pressurised controllable dicharge mechanism, pressure guage, Discharge hose and nozzle epoxy polyster powder coated as per IS 15683 ISI mark fire extinguisheroperating temperature (-)20 to (+)55 C kg capacity suitable for A,B,C class of FIRE complete.
395	Supplying and erecting of fire Exit & Eire Exinguishersignlge Indicating the floor- numtber in words &syslem(Fire Exiinguisher& Accessories
396	Supplying and erecting DCP Type 25 kg capacity trolley Mounted with controllable dicharge mechanism, pressure guage, Discharge hose and nozzle epoxy polyster powder coated as per IS 15683 ISI mark fire extinguisheroperating temperature (-)20 to (+) 55 C kg capacity suitable for A,B,C class ofFIRE complete.
397	Supply, Installation, testing zinc aluminite fire water storage tank having capacity 10 KL having structreaboce ground which gives positive suction to fire Pumps. The tank shall include all civil work including site prepartion, excavation , PCC which can load of tankincluding of 100% water.( for booster pump as per NBC).
398	Supplying , Installation , Testing And Commissioning of Hinged Metal fire door 120 min fire rated un insulated single 50mm THK Honey Comb Infill single double RBT 143 x 57mm frame Straight with anchor fast erness frame 1.0 & shutter 0.9 mm powder coated to ral shade SFP SS Ball bearing 4\" x 3\" x 3\"mm hionghed for steel doors ingersoll rand briton 121, NCE. SES Door closer size 3 with standard ARM , sprayed silver finish SFP SS sashlock with 70mm back set and 24 mmfor end , SS lever handle 22x 125 mm on rose , Euro profile cylinder 70 mm with both side key 29 SS strike plate Escutchenosschott pyran fire rated clear Glass 6mm thick 240 x 340 33 Hinged Metal Fire Door 120 min fire Rated
399	Supplying and erecting PVC trunking (PVC casing-n-capping)ofsize25 mm with accessorieson wall/ceiling as perspecification No: WG-MA/CON.
400	Supplying and erecting mains with 3x2.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/insidepole/Bus bars or any other places as per specification No: WG-MA/BW
401	Supplying and erecting modular type switch 6A / 10A duly erected on provided plate andbox with wiring connections complete.
402	Supplying and erectingmodular type 3 pin 6 / 16Amultisocket with safety shutter,duly erected on provided plate and box with wiringconnections complete.
403	Supplying and erecting PVC Surface modular switch box with double mounting plate for 3module duly erected.
404	Supplying and erecting iron, sheet metal work consisting of CRCA sheets, various sections of iron, plates, chequered plates, rods, bars,MSpipes,etc. forpanel board or any other purpose with bending, cutting, drilling and welding completeerectedatthe position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by theauthority ( separate Iron work calculation sheet attached).
405	Supplying, erecting& terminatingFR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 4 sq.mm. copperconductor completeerected with glands & lugs, on wall/ trusses/ pole or laid inprovided trench/ pipeas per specification no. CB-LT/CU(for booster Pump)
406	Providing earthing with galvanized iron earth plate size 60 x 60 x 0.6 cm complete with all materials, testing & recording the results as per specification no. EA-EP (earthig schedule: 2 nos for each 2 nos main fire pump for hydrant and sprinkler , 2nos for each 2 nos jockey pump for sprinkler and hydrant , 1 nos for main fire panel and 1 nos for disel engine pump).= total 6 nos of earthing.
407	Supplying and erecting GI strip of required size used for earthing on wall and/or any other purpose with necessary GI clamps fixed on wall painted with bituminous paint in an approved manner with joints required. As per specification no EA-EP.(25x5) (1kg/mtr x 50 mtr=50 kg)
408	Supplying, installation, testing and commissioning of booster fire pump [BP] suitable for water discharge of 900 LPM at 35 m head driven by electric motor 415 volts, 3 phase 50 Hz, AC supply of 7.5 kW or of suitable kW capacity for manual/automatic operation and consisting of following :(a) Horizontal/vertical type, single/multi stage, centrifugal casing pump of cast iron body & bronze/CI impeller with stainless steel shaft (SS410 grade), mechanical seal conforming to IS 1520.(b) Squirrel cage induction motor, TEFC, synchronous speed 3000 RPM, suitable for operation on with IP 55 protection for enclosure, horizontal foot mounted type with Class-\"F\" insulation, conforming to IS-325.(c) M.S. fabricated common base plate, coupling, coupling guard, foundation bolts etc. as required.(d)Erected on provided suitable size cement concrete foundation duly plastered with anti vibration pads with perfect aligning, proper levelling complete pump set with accessories duly painted with two coats of synthetic enamel paint of fire red colour over a coat of primer (ISC code 536 as per IS 2932 of 2003) complete, as per specification no. FF-MFP/BP
409	For addition of booster pump for fire hydrant/sprinkler, add as follows in the basic cost of item no 13-5-1 towards necessary accessories, indicators etc. with necessary interlocking and updation of control logic.....for 5.5/ 7.5 kW centrifugal type booster pump 1no(1working) , add Rs…....
410	Supplying and erecting G.I. pipe above ground of ‘C’ class ERW of size 25 mm dia with necessary fittings complete asperspecification no. FF-PP
411	Supplying and erecting G.I. pipe above ground of ‘C’ class ERW of size 50 mm dia with necessary fittings complete asper specification no. FF-PP
412	Supplying and erecting G.I. pipe above ground of ‘C’ class ERW of size 65 mm dia with necessary fittings complete asper specification no. FF-PP
413	Supplying and erecting G.I. pipe above ground of ‘C’ class ERW of size 75/80 mm dia with necessary fittings complete asper specification no. FF-PP
414	Supplying and erecting G.I. pipe above ground of ‘C’ class ERW of size 100 mm dia with necessary fittings complete asper specification no. FF-PP
415	Supplying and erecting G.I. pipe above ground of ‘C’ class ERW of size 150 mm dia with necessary fittings complete asper specification no. FF-PP
416	Supplying anderecting100 mm dia Cast Iron end line strainer of Y-type flanged end pattern, PN16 pressure rating, SS screen, end connection with Flanged / Screwed / Socket Weld / Butt Weld End etc with standard OAR(open area Ratio) forpositive suction complete asper specification no. FF-VL/ELS
417	Supplyinganderecting100mm dia.cast iron double flange sluice valve complete with PN16 pressure rating, as per specification no. FF-VL/SV
418	Supplying and erecting 50 mm dia. cast iron double flange butterfly valve of size completewith PN16 pressure rating, asper specification no. FF-VL/BFV
419	Supplying and erecting 75/80 mm dia. cast iron double flange butterfly valve of size complete with PN16 pressure rating, asperspecification no. FF-VL/BFV
420	Supplying & erecting cast iron double flange butterfly valve of size 100 mm dia. complete asper specification no. FF-VL/BFV
421	Supplying & erecting cast iron double flange butterfly valve of size 150 mm dia. completeasper specification no. FF-VL/BFV
422	Supplying and erecting cast iron double flange ball type NRV of size 100 mm dia complete asper specification no. FF-VL/NRV
423	Supplying&erectinggunmetal gatevalveof size25 mmdia complete asper specification no. FF-VL/GV
424	Supplying anderectingstainless steel single outlethydrantvalve fitted with necessaryaccessories complete asper specification no. FF-VL/HV.
425	Supplying and installing wall mounting swinging hose reel drum fitted with 19 mm dia. 30m long high pressure polypropylene(Polyhose)along with necessary accessories complete asper specification no. FF-FFA/HV
426	Supplying fire fighting reinforced rubber lined (R.R.L.) hose pipe, 63mm dia, 15m inlength, fitted with necessary accessories complete asper specification no. FF-FFA/RRL
427	Supplying & erecting stainless steel branch pipe 63 mm dia fitted with 20 mm dia detachable hexagonal nozzle complete as perspecifications no. FF-FFA/NZ
428	Supplying and erecting 20/25mm dia gun metal air release cock, with necessary G.I. coupling to be fitted on top of air vessel or on wet riser complete asper specification no.FF-FFA/ARV (7no. For Riser + Two for Air Vessel= 9 nos.
429	Supplying and erecting 100 mm dia. pressure gauge , 0-300 PSI or 0-14 kg per cm square fitted with 12/15 mm dia. pad cock valve,erected with provided G.I. pipe, elbow etc. complete asper specification no. FF-FFA/PG
430	Supplying and erecting brass orifice plate having 6 mm. thickness, 140 mm outer dia with required diameter of inner hole at everysingle outlet hydrant valve as per specification no. FF-FFA/OP (For Internal Hydrant).
431	Supplying and erecting M.S./CRCA cabinet for housingFloorHydrant valve,hosepipe, hosereeland branch pipe(size 1000 x 736 x 736 mm.) made from 16 SWG sheetand angle iron 25 x 25 x 4 mm. having front doors with viewing glass (8\"x6\") and locking arrangement with necessary fixing material such as rubber bidding etc. duly painted in post box red colour( Code 538 of IS 5) (BoX for Two set of Hose Pipe along with 1set of Branch Pipe).
432	Supplying, installation, testing and commissioning of micro processor based intelligent addressable main fire alarm panel, central processing unit with the 4 loop capacity and capable of supporting upto 250 devices and detectorsper loop,with on-board LCD display with min 16 lines of text, operating at 230 V 50 HZ - AC with inbuilt Battery Backup of a minimum 24 hours in normal condition and 30 min in alarm condition, suitable provision for network connectivity, interfacing with third party equipment via a MODBUS/ OPC/ L-ON interface etc. conforming to IS 15908:2021,,IS 2189: 2008, EN 54 & VDS / FM/UL864(10th edition)with 3 years replacement warranty FF-AFAS/CP.
433	Supplying, installing, testing and commissioning ofrepeater panel with suitable battery backup of a minimum of 24 hours in normal condition and 30 min in alarm condition, 80 backlit alphanumeric LCD display with inbuilt buzzer to indicate fault/fire alarm, manual control keys for silence/mute and to reset the FACP from the repeater station. Panel size shall not more than 175 x 275 x 65 mm conforming to EN 54 orUL approvedwith 3 years equipment replacement warranty FF-AFAS/RP
434	Supplying, installing, testing and commissioning of addressable optical smoke detector, single/twin LED’s with 360 degree view, suitable for low voltage 15 to 32 V DC two wires supply, in-built locking mechanism to check the removal and pilferage of the detector, in built isolation mode, start up current 300µA and alarm condition current shall be maximum 6.5 mA, operating temperature 0°C to 50°C, humidity 0-95% RH, IP 41, conforming to IS 2189: 2008, 11360_1985_Reff2020 EN 54 or ULApproved with 3 years equipment replacement warranty FF-AFAS/SD
435	Supplying, installing, testing and commissioning of intelligent addressable thermal/heat detector with rate of rise cum fixed temperature thermistor complete with base as required, suitable for temperature variations from -20°C to 38°C for fixed-heat and rate-of-rise type detectors and 0°C to 66°C for high heat type detectors, in built isolation mode, suitable for offices/ceiling cable trenches/less ventilation area\"s etc. with 3 years equipment replacement warrantyIS : 2175 - 1988 reaffirmed 2000,IS 15908:2021standards FF-AFAS/SD.
436	Supplying, installing, testing and commissioning of addressable manual call points ( break glass type/pull station type), made of addressable break glass plastic square in shape surface/flush mounted with \"Break Glass\" massage embedded on the glass, complete erected with mounting base and required accessories conforming to EN 54 or UL listedwith 3 years equipment replacementwarrantyFF-AFAS/MCP.
437	Supplying, installing, testing and commissioning of addressable fire control/relay module complete as required, with 3 years equipment replacement warranty conforming to IS 5051Part 2 (Sec 1 to 3) : 1982 reed relays,EN 54 or UL Listed FF-AFAS/CRM
438	Supplying, installing, testing and commissioning of addressable fire monitor module complete as required. EN 54 or UL Listed with 3 years equipment replacementwarranty conforming toIS 5051Part 2 (Sec 1 to 3) : 1982 Reed relaysFF-AFAS/MM
439	Supplying, installing, testing and commissioning of addressable fire isolator module complete as required.EN 54 /FM or UL Listed with 3 years equipment replacement warranty conforming to IS5051Part 2 (Sec 1 to 3) : 1982 Reed relays FF-AFAS/ISM
440	Supplying, installing, testing and commissioning of addressable horn cum strobe sound/ hooter, output frequency 500 to 1000 Hz with dB as per Chart given in IS 15908:2021, with flashing at 1 Hz over the strobe’s entire operating voltage rangeEN 54, conforming to IS 2189: 2008, IS 15908:2021standards with 3 years equipment replacement warranty FF-AFAS/SSH.
441	Supplying, installing, testing and commissioningFR, XLPE armouredcable 2 core 1.5 sq.mm. copper conductor completeerected on wall/ ceiling complete asper specification no. CB-LT/CU
442	Supplying, erecting, testing and commissioning 120 W amplifier suitable to operate on 230VoltsA.C. / 12VoltsD.C.supply complete asper specification no. FF- PA/AFR
443	Supplying, erecting, testing and commissioning15 to 30 Watts sound column or ceiling mounted complete asperspecification no. FF-PA/SOC
444	Supplying, erecting, testing and commissioning stand mounted/handheld type wired microphone having 2 mV/Pa sensitivity, impedance level limit 300 ohms and 50 - 16000 Hz suitable to operate in -10 deg C to+55 deg C with min. 7 metre shielded cable and 3 Pin Professional XLR Connector, stereo jack complete asper specification no.FF-PA/MIC
445	Supplying, erecting, testing and commissioningrust free microphone floor stand of chrome plating/powder coating orS.S. material , 500 mm to 1500 mmheight and sturdy mechanism ensuring trouble free movement complete.
446	Supplying, erecting, testing and commissioning of 2 core shielded cablecomplete asper specification no.FF- PA/MCC
447	Supplying and installing corrugated SS flexible conduit of size 25mm dia for connecting sprinkler head with necessaryfittings as per specifications having 1000mm long with UL/FM
448	Carrying out core cutting of size 3\" to 5\" dia x 15\" length in the C.C./rock/stone wall with the help of specialized core cutting machine in proper manner and finishing the site as original.
449	Supplying, erecting, testing and commissioning of quartzoid bulb sprinkler, 15 mm (½\") dia. NBCM Body chrome finished, 68º C fixed temperature rating with deflectordisc of conventional construction complete as per specification no. FF-SPR.
450	Supplying, erecting, testing and commissioning of horizontal sidewall quartzoid bulb sprinkler, 15 mm (½\") dia quartzoid bulb. NBCM Body chrome finished, 68º C fixed temperature rating with deflector disc of conventional construction complete as per specification no. FF-SPR/SS
451	Supplying and erecting fire resistant mortar (20 kg) with fire resistance class S90 as per National Electrical Code (NEC) SP30-2011 suitable to seal the openings of all kinds of cables, pipes and cable support system in steel, aluminium and plastic profiles ( except hollow core conductors). The residual openings shall be closed with filler, as per specification no FF-FRM. Note :- For estimating purpose consider 1 bag of 20kg to cover 300mm x 400mm area 150mm thick or0.018 m3. ( Total 108 rooms in Hospital, Each rooms having Fire sprinkler and other utility opening ,hence conidered one 20 kg bag per room. Total Set Required ( 300 X 400 X 150 =1 room X 50 =50 Nos)
452	Making trench in Hard murum/Tar road having 0.75 m depth and minimum 0.3mtr width as per IS for laying provided cables uptovoltage level1.1Kv cable complete as per specification No. CW-EXN-CTR
453	Making cement concrete foundation in 1:2:4 cement concrete with foundation bolts and nuts complete ( cost of wooden box is included) for pumps for pump (1.2x 1.2 x0.8)= 1.15 x 6 = 6.9 cum for overhead tank (1.8 x 1.8 x 0.9)=2.91 x 2= 5.82 cum total(6.9+5.82)= 12.72 Cu-M
454	Supplying & erecting Carbon Dioxide (CO2) fire extinguisher of 4.5 kg. capacity cartridge type conform to IS 2878 /15683 complete erected with necessary clamp made from 50 x 6 mm. M. S. flat with nut & bolts routed inwall complete.
455	Supplying and erecting 4 kg clean agent gas Nitrogen pressurised controllable dicharge mechanism, pressure guage, Discharge hose and nozzle epoxy polyster powder coated as per IS 15683 ISI mark fire extinguisheroperating temperature (-)20 to (+) 55 C kg capacity suitable for A,B,C class ofFIRE complete.
456	Supplying and erecting DCP Type 25 kg capacity trolley Mounted with controllable dicharge mechanism, pressure guage, Discharge hose and nozzle epoxy polyster powder coated as per IS 15683 ISI mark fire extinguisheroperating temperature (-)20 to (+) 55 C kg capacity suitable for A,B,C class ofFIRE complete.
457	Supplying and erecting of fire Exit & Eire Exinguishersignlge Indicating the floor- numtber in words &syslem(FireExiinguisher& Accessories ) (Non CSR Approved by S.E.Office ,mumbaivide T.S letterno- 108Date- 13/01/2022 )
458	Supply, Installation, testing zinc aluminite fire water storage tank having capacity 10 KL having structreaboce ground which gives positive suction to fire Pumps. The tank shall include all civil work including site prepartion, excavation , PCC which can load of tank including of 100% water.( for booster pump as per NBC).
459	Supplying , Installation , Testing And Commissioning of Hinged Metal fire door 120 min fire rated un insulated single 50mm THK Honey Comb Infill single double RBT 143 x 57mm frame Straight with anchor fast erness frame 1.0 & shutter 0.9 mm powder coated to ral shade SFP SS Ball bearing 4\" x 3\" x 3\"mm hionghed for steel doors ingersoll rand briton 121, NCE. SES Door closer size 3 with standard ARM , sprayed silver finish SFP SS sashlock with 70mm back set and 24 mmfor end , SS lever handle 22x 125 mm on rose , Euro profile cylinder 70 mm with both side key 29 SS strike plate Escutchenosschott pyran fire rated clear Glass 6mm thick 240 x340 33 Hinged Metal Fire Door 120 min fire Rated
460	Supplying and erecting PVC trunking (PVC casing-n-capping) of size 25 mm with accessorieson wall/ceiling as per specification No: WG-MA/CON.
461	Supplying and erecting mains with 3x2.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/insidepole/Bus bars or any other places as per specification No: WG-MA/BW
462	Supplying and erectingmodular type switch6A / 10A duly erected on provided plate and box with wiring connections complete.
463	Supplying and erectingmodular type 3 pin 6 / 16Amultisocket with safety shutter,duly erected on provided plate and box with wiringconnections complete.
464	Supplying and erecting PVC Surface modular switch box with double mounting plate for 3module duly erected.
465	Supplying and erecting iron, sheet metal work consisting of CRCA sheets, various sections of iron, plates, chequered plates, rods, bars,MSpipes,etc. forpanel board or any other purpose with bending, cutting, drilling and welding completeerectedatthe positionwith necessarymaterialsduly paintedwith one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority ( separate Iron work calculation sheet attached).
466	Supplying, erecting& terminatingFR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 4 sq.mm. copperconductor completeerected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipeas per specification no. CB-LT/CU(for booster Pump)
467	Providing earthing with galvanized iron earth plate size 60 x 60 x 0.6 cm complete with all materials, testing & recording the results as per specification no. EA-EP (earthig schedule: 2 nos for each 2 nos main fire pump for hydrant and sprinkler , 2nos for each 2 nos jockey pump for sprinkler and hydrant , 1 nos for main fire panel and 1 nos for disel engine pump).= total 6 nos of earthing.
468	Supplying and erecting GI strip of required size used for earthing on wall and/or any other purpose with necessary GI clamps fixed on wall painted with bituminous paint in an approved manner with joints required. As perspecification no EA-EP.(25x5) (1kg/m x 50 m=50 kg)
469	Supplying, installation, testing and commissioning of booster fire pump [BP] suitable for water discharge of 900 LPM at 35 m head driven by electric motor 415 volts, 3 phase 50 Hz, AC supply of 7.5 kW or of suitable kW capacity for manual/automatic operation and consisting of following :(a) Horizontal/vertical type, single/multi stage, centrifugal casing pump of cast iron body & bronze/CI impeller with stainless steel shaft (SS410 grade), mechanical seal conforming to IS 1520.(b) Squirrel cage induction motor, TEFC, synchronous speed 3000 RPM, suitable for operation on with IP 55 protection for enclosure, horizontal foot mounted type with Class-\"F\" insulation, conforming to IS-325.(c) M.S. fabricated common base plate, coupling, coupling guard, foundation bolts etc. as required.(d)Erected on provided suitable size cement concrete foundation duly plastered with anti vibration pads with perfect aligning, proper levelling complete pump set with accessories duly painted with two coats of synthetic enamel paint of fire red colour over a coat ofprimer (ISC code 536 as per IS 2932 of 2003) complete, as per specification no. FF-MFP/BP
470	For addition of booster pump for fire hydrant/sprinkler, add as follows in the basic cost of item no 13-5-1 towards necessary accessories, indicators etc. with necessary interlocking and updation of control logic.....for 5.5/ 7.5 kW centrifugal type booster pump 1no(1working) , add
471	Supplying and erecting G.I. pipe above ground of ‘C’ class ERW of size 25 mm diawith necessary fittings complete asper specification no. FF-PP
472	Supplying and erecting G.I. pipe above ground of ‘C’ class ERW of size 75/80 mm dia with necessary fittings complete asperspecification no. FF-PP
473	Supplying and erecting G.I. pipe above ground of ‘C’ class ERW of size 100 mm dia with necessary fittings complete asperspecification no. FF-PP
474	Supplying and erecting G.I. pipe above ground of ‘C’ class ERW of size 150 mm dia with necessary fittings complete asper specification no. FF-PP
475	Supplying anderecting100 mm dia Cast Iron end line strainer of Y-type flanged end pattern, PN16 pressure rating, SS screen, end connection with Flanged / Screwed / Socket Weld / Butt Weld End etc with standard OAR (open area Ratio) forpositive suction complete asper specification no. FF-VL/ELS
476	Supplyinganderecting100mm dia.cast iron double flange sluice valve complete with PN16 pressure rating, asper specification no. FF-VL/SV
477	Supplying and erecting 50 mm dia. cast iron double flange butterfly valve of size complete with PN16 pressure rating, asperspecification no. FF-VL/BFV
478	Supplying and erecting 75/80 mm dia. cast iron double flange butterfly valve of size complete with PN16 pressure rating, asper specification no. FF-VL/BFV
479	Supplying & erecting cast iron double flangebutterfly valve of size 100 mm dia. complete asper specification no. FF-VL/BFV
480	Supplying & erecting cast iron double flangebutterfly valve of size 150 mm dia. complete asper specification no. FF-VL/BFV
481	Supplying and erecting cast iron double flangeball type NRV of size 100 mm dia complete as per specification no. FF-VL/NRV
482	Supplying&erectinggunmetal gatevalveof size25 mmdia complete asper specification no. FF-VL/GV
483	Supplying anderectingstainless steel single outlethydrantvalve fitted with necessaryaccessories complete asper specification no. FF-VL/HV.
484	Supplying and installing wall mounting swinging hose reel drum fitted with 19 mm dia. 30m long high pressure polypropylene(Polyhose)along with necessary accessories complete asper specification no. FF-FFA/HV
485	Supplying fire fighting reinforced rubber lined (R.R.L.) hose pipe, 63mm dia, 15m inlength, fitted with necessary accessories complete asper specification no. FF-FFA/RRL
486	Supplying & erecting stainless steel branch pipe 63 mm dia fitted with 20 mm dia detachable hexagonal nozzle complete as perspecifications no. FF-FFA/NZ
487	Supplying and erecting 20/25mm dia gun metal air release cock, with necessary G.I. coupling to be fitted on top of air vessel or on wet riser complete asper specification no.FF-FFA/ARV (7no. For Riser + Two for Air Vessel= 9 nos.
488	Supplying and erecting 100 mm dia. pressure gauge , 0-300 PSI or 0-14 kg per cm square fitted with 12/15 mm dia. pad cock valve,erected with provided G.I. pipe, elbow etc. complete asper specification no. FF-FFA/PG
489	Supplying and erecting brass orifice plate having 6 mm. thickness, 140 mm outer dia with required diameter of inner hole at everysingle outlet hydrant valve as per specification no. FF-FFA/OP (For Internal Hydrant).
490	Supplying and erecting M.S./CRCA cabinet for housingFloorHydrant valve,hosepipe, hosereeland branch pipe(size 1000 x 736 x 736 mm.) made from 16 SWG sheetand angle iron 25 x 25 x 4 mm. having front doors with viewing glass (8\"x6\") and locking arrangement with necessary fixing material such as rubber bidding etc. duly painted in post box red colour( Code 538 of IS 5) (BoX for Two set of Hose Pipe along with 1set of Branch Pipe).
491	Supplying, installation, testing and commissioning of micro processor based intelligent addressable main fire alarm panel, central processing unit with the 4 loop capacity and capable of supporting upto 250 devices and detectorsper loop,with on-board LCD display with min 16 lines of text, operating at 230 V 50 HZ - AC with inbuilt Battery Backup of a minimum 24 hours in normal condition and 30 min in alarm condition, suitable provision for network connectivity, interfacing with third party equipment via a MODBUS/ OPC/ L-ON interface etc. conforming to IS 15908:2021,,IS 2189: 2008, EN 54 & VDS / FM/UL864(10th edition)with 3 years replacement warranty FF-AFAS/CP.
492	Supplying, installing, testing and commissioning ofrepeater panel with suitable battery backup of a minimum of 24 hours in normal condition and 30 min in alarm condition, 80 backlit alphanumeric LCD display with inbuilt buzzer to indicate fault/fire alarm, manual control keys for silence/mute and to reset the FACP from the repeater station. Panel size shall not more than 175 x 275 x 65 mm conforming to EN 54 orUL approvedwith 3 years equipment replacement warranty FF-AFAS/RP
493	Supplying, installing, testing and commissioning of addressable optical smoke detector, single/twin LED’s with 360 degree view, suitable for low voltage 15 to 32 V DC two wires supply, in-built locking mechanism to check the removal and pilferage of the detector, in built isolation mode, start up current 300µA and alarm condition current shall be maximum 6.5 mA, operating temperature 0°C to 50°C, humidity 0-95% RH, IP 41, conforming to IS 2189: 2008, 11360_1985_Reff2020 EN 54 or ULApproved with 3 years equipment replacement warranty FF-AFAS/SD
494	Supplying, installing, testing and commissioning of intelligent addressable thermal/heat detector with rate of rise cum fixed temperature thermistor complete with base as required, suitable for temperature variations from -20°C to 38°C for fixed-heat and rate-of-rise type detectors and 0°C to 66°C for high heat type detectors, in built isolation mode, suitable for offices/ceiling cable trenches/less ventilation area\"s etc. with 3 years equipment replacement warrantyIS : 2175 - 1988 reaffirmed 2000,IS 15908:2021standards FF-AFAS/SD.
495	Supplying, installing, testing and commissioning of addressable manual call points ( break glass type/pull station type), made of addressable break glass plastic square in shape surface/flush mounted with \"Break Glass\" massage embedded on the glass, complete erected with mounting base and required accessories conforming to EN 54 or UL listedwith 3 years equipment replacement warranty FF-AFAS/MCP.
496	Supplying, installing, testing and commissioning of addressable fire control/relay module complete as required, with 3 years equipment replacement warranty conforming to IS 5051Part 2 (Sec 1 to 3) :1982 reed relays,EN 54 or UL Listed FF- AFAS/CRM
497	Supplying, installing, testing and commissioning of addressable fire monitor module complete as required. EN 54 or ULListedwith 3 years equipment replacement warranty conforming toIS 5051Part 2 (Sec 1 to 3) : 1982 Reed relaysFF-AFAS/MM
498	Supplying, installing, testing and commissioning of addressable fire isolator module complete as required.EN 54 /FM or UL Listed with 3 years equipment replacement warranty conforming to IS5051Part 2 (Sec 1 to 3) : 1982 Reed relays FF-AFAS/ISM
499	Supplying, installing, testing and commissioning of addressable horn cum strobe sound/ hooter, output frequency 500 to 1000 Hz with dB as per Chart given in IS 15908:2021, with flashing at 1 Hz over the strobe’s entire operating voltage rangeEN 54, conforming to IS 2189: 2008, IS 15908:2021 standards with 3 years equipment replacement warranty FF-AFAS/SSH.
500	Supplying, installing, testing and commissioningFR, XLPE armouredcable 2 core 1.5 sq.mm. copper conductor complete erected on wall/ ceiling complete asper specification no. CB-LT/CU

Also Visit

Tenders

Maharashtra Tenders

Services Tenders

Other Services Tenders

Safety Consultancy Service Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Providing Fire And Electrical Safety Measures As Per National Safety Councils Safety Audit Recommendations At J J Hospital Campus Buildings Byculla Mumbai, Mumbai-Maharashtra

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Tender For Providing Fire And Electrical Safety Measures As Per National Safety Councils Safety Audit Recommendations At J J Hospital Campus Buildings Byculla Mumbai, Mumbai-Maharashtra

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us