|
| 1 | CODE NO. 2.6.1A: Earthwork in excacavation over areas (exceeding 30 cm in depth , 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth lead upto 50m and lift upto 1.5m - disposed earth to be levelled and neatly dresses - all kinds of soil |
| 2 | CODE NO.2.8.1:Earthwork in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5m, including getting out the excavated soil and disposal of surplus excavated soil as directed , within a lead of 50m - all kinds of soil |
| 3 | CODE NO. 2.28.1:Surface dressing of the ground including removing vegetation and in - equalities not exceeding 15 cm deep and disposal of rubbish, lead upto 50m and lift upto 1.5m - all kinds of soil |
| 4 | CODE NO: 2.33.1:Felling trees of the girth (measured at a height of 1m above ground level) including cutting of trunks and branches , removing the roots and stacking of serviceable material and disposal of unserviceable material - beyond 30cm girth upto and including 60cm girth. |
| 5 | CODE NO: 4.1.10:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work upto plith level - 1:5:10 (1 cement : 5 coarse sand :10 graded stone aggregate 40mm nominal size) |
| 6 | CODE NO: 4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work upto plith level - 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) |
| 7 | CODE NO: 4.3.1:Centring and shuttering including strutting, propping etc. and removal of form work for - foundations, footings, bases for columns. |
| 8 | CODE NO: 5.2.3:Reinforced cement concrete work in walls (any thickness) , including attached pilasters, buttresses , plinth and sting courses , fillets , columns , pillars , piers , abutments , postsand struts etc. upto floor five level excluding cost of centering , shuttering , finishing and reinforcement - 1:2:4 (1 cement : 2coarse sand :4 graded stone aggregate 20mm nominal size) |
| 9 | CODE NO: 5.12: Providing , hoisting and fixing upto floor five level precast reinforced cement concrete work in string courses, bands, copings, bed plates, anchor blocks, plain window sills and the like, including the cost of required centering, shuttering but excluding cost of reinforcement , with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) |
| 10 | CODE NO: 5.22.6:Steel reinforcement for R.C.C.work including straightening , cutting , bending , placing in position and binding all complete upto plinth level - Thermo -Mechanically treated bars (TISCON / VIZAG / IISCO / SAIL / JSW) Fe - 415 or more |
| 11 | CODE NO: 6.1.1: Brick work with common burnt clay F.P.S. (non modular ) bricks of class designation 7.5 in foundation and plinth in - cement mortar 1:4 (1 cement : 4 coarse sand) |
| 12 | CODE NO: 6.12.2: Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundations and plinth in - cement mortar 1:4 (1 cement :4 coarse sand) |
| 13 | CODE NO: 6.13.2:Half brick masonry with bricks of class designation 7.5 in superstructure above plinth level upto floor V level in cement mortar 1:4 (1 cement : 4 coarse sand) |
| 14 | CODE NO: 7.16MO:Cement plaster 12mm thick in cement mortar1:3 |
| 15 | CODE NO: 7.23A.MO:Providing and fixing premoulded bitumen joint filler, for expansion joints including the cost of sealing compound and priming coat - 12 mm wide |
| 16 | CODE NO: 11.3.1: Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc .complete - 40mm thick with 20mm nominal size stone aggregate |
| 17 | CODE NO: 11.36A:Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer) , of approved make (Jhonson / Asian / Somany / Nitco) in all colours , shades of size 200 x 300 mm as approved in skirting , risers of steps and dados, over 12mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand ) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement with pigment of matching shade complete - size 200x300 mm |
| 18 | CODE NO:12.20: Providing and laying pressed clay tiles (as per approved pattern 18mm nominalthickness of approved size) on roofs jointed with cement mortar 1:4 (1 cement : 4 coarse sand) mixed with 2% integral water proofing compound , laid over a bed of 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) and finished neat complete |
| 19 | CODE NO: 12.41.2: Providing and fixing on wall face unplasticised rigid PVC rain water pipes conforming to IS: 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10mm gap for thermal expansion, (i) Single socketed pipes - 110 mm diameter |
| 20 | CODE NO: 12.42.4.1: Providing and fixing on wall face unplasticised - PVC moulded fittings / accessories for unplasticised rigid PVC rain water pipes conforming to IS:13592 Type A, including jointing with seal ring conforming to IS: 5382, leaving 10mm gap for thermal expansion - Single tee without door -75x75x75mm |
| 21 | CODE NO: 12.42.5.2: Providing and fixing on wall face unplasticised - PVC moulded fittings /accessories for unplasticised rigid PVC rain water pipes conforming to IS:13592 Type A, including jointing with seal ring conforming to IS: 5382, leaving 10mm gap for thermal expansion - bend 87.5 degree - 110 mm bend |
| 22 | CODE NO:12.42.6.2:Providing and fixing on wall face unplasticised - PVC moulded fittings / accessories for unplasticised rigid PVC rain water pipes conforming to IS:13592 Type A, including jointing with seal ring conforming to IS: 5382, leaving 10mm gap for thermal expansion - shoe (plain) - 110mm shoe |
| 23 | CODE NO: 12.43.1:Providing and fixing unplasticised - PVC pipe clips of approved design to unplasticised- PVC rain water pipes by means of 50x50x50mm hard wood plugs, screwed with M.S. screws of required length, including cutting brickwork and fixing in cement mortar 1:4 ( 1 cement : 4 coarse sand) and making good the wall etc., complete - 75mm |
| 24 | CODE NO:12.43.2: Providing and fixing unplasticised - PVC pipe clips of approved design to unplasticised- PVC rain water pipes by means of 50x50x50mm hard wood plugs,screwed with M.S. screws of required length, including cutting brickwork and fixing in cement mortar 1:4 ( 1 cement : 4 coarse sand) and making good the wall etc., complete - 110mm |
| 25 | CODE NO:13.1.1:12mm cement plaster of mix - 1:4 (1cement : 4 fine sand) |
| 26 | CODE NO: 13.2.1:15mm cement plaster on the rough side of single or half brick wall of mix - 1:4 (1cement : 4 fine sand) |
| 27 | CODE NO: 13.9.2: cement plaster 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement - 20mm cement plaster |
| 28 | CODE NO:13.21:Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers |
| 29 | CODE NO:13.48.1:Finishing with deluxe multi surface paint system for interiors and exteriors using primer as per manufacture\"s specification -Two or more coats applied on walls @ 1.25 ltr / 10 sqm over and including one coat of special primer applied @ 0.75 ltr / 10 sqm |
| 30 | CODE NO: 14.1.1: Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sq.metres and under including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 metres lead - with cement mortar 1:4 (1 cement : 4fine sand) |
| 31 | CODE NO:14.42.1: White washing with lime to give an even shade - Old work (two or more coats) |
| 32 | CODE NO:14.43: Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scrarches etc.complete |
| 33 | CODE NO:14.54.1: Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade - One or more coats on old work |
| 34 | CODE NO:15.2.1:Demolishing cement concrete manually / by mechanical means including disposal of material within 50 metres lead - nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) |
| 35 | CODE NO:16.68:Providing and laying 60mm thick factory made cement concrete interlocking paver block of M-30 grade made by block making machine with strong vibratory compaction and of approved size and design / shape laid in required colour and pattern over and including 50mm thick compacted bed of course sand , filling the joints with coarse sand etc. all complte |
| 36 | CODE NO:16.96:Supplying fixing and commisioning of Suguna / Texmo / Sharp 2 HP monoblock pumpset slow speed single phase motor. The rate include the cost of pumpset , pumpset fixing in position and test run etc.complete |
| 37 | CODE NO : 18.9.11: Providing and fixing ASTM pipes including all ASTM plain& brass threaded fittings i/c fixing the pipe with clamps at 1.00m spacing . This includes jointing of pipes & fitting with one step ASTM solvent cement and testing of joints complete (Internal work exposed on wall ) - 20mm nominal outer dia pipes |
| 38 | CODE NO : 18.9.33: Providing and fixing ASTM pipes including all ASTM plain & brass threaded fittings this included jointing of pipes & fittings with one step ASTM solvent cement , trenching refilling &esting of joints complete (External work) - 32 mm nominal outer dia pipes |
| 39 | CODE NO : 18.15.1:Providing and fixing brass bib cock of approved quality - 15mm nominal bore |
| 40 | CODE NO : 19.33.1:Providing and fixing on wall / column face unplasticed - PVC soil and waste pipes (type - B) conforming to IS : 13592- 1992 including jointing with seal ring conformation to IS : 5382 leaving 10mm gap for thermal expansion - single socked pipes -110mm diameter |
| 41 | CODE NO : 19.32.1A:Making soak pit 2.5 m diameter 3 m deepwith 45 x 45 cm dry brick honeycomb shaft with bricks of class designation 75 and 110mm dia UPVC pipe (type B) 1.8 m long complete as per stadard design with F.P.S.bricks |
| 42 | CODE NO : 19.33.1C:Providing and fixing on wall face / column face unplasticised - PVC mould fittings / accessories for unplasticisd - PVC soil and waste pipes conforming to IS : 14735 - 1999 including jointing with seal ring conforming to IS : 5382 leaving 10mm gap for thermal expansion - bend 110 mm |
| 43 | CODE NO : 19.33.2:Providing and fixing on wall / column face unplasticised - PVC soil and waste pipes (type B) conforming to IS :13592 - 1992 including jointing with seal ring conforming to IS : 5382 leaving 10mm gap for thermal expansion - Single socketed pipes 75mm diameter |
| 44 | CODE NO : 20.2.1:Boring , providing and installing bored cast -in-situ reinforced cement concrete piles of grade M-25 of specified diameter and length below the pile cap, to carry a safe working load not less than specified, excluding the cost of steel reinforcement but including the cost of boring , with bentonite solution and temporary casing of appropriate lenghth for setting out and removal of same and the lenghth of the pile to be embedded in the pile cap etc. all complete , including removal of excavated earth with all lifts and leads (length of pile for payment shall be measured upto bottom of pile cap) - 300 mm dia piles |
| 45 | CODE NO : 30.7:Supply of Quarry rubbish including stackingto department gauge forpremeasurement and spreading required thickness |
| 46 | CODE NO : 30.38:Desilting the canal by removing silt, slush and debries from the bed of the drain removing the grass , buses etc., complete in unhygenic and foul condition including disposal of the same within an average lead of 1KM without polluting the environment by manual means |
| 47 | CODE NO : Non PSR:Construction of recharged shaft with lowaring RCC rings of 1.20m and 5cm thick for 3.00m depth including earth work excavation and bailig out water inside the shaft from botton 50-75mm size bouldes (HBG metal) for 1.5m, 6 to 12mm size pebbles for 90 cm and course sand for 30cm shall be filled.The shaft shall be covered with reinforcement at the rate of 100kg/Cum with free Board of 30cm and providing nylon mesh under the pebbles of size 6 to 12mm and splash pad on the of top of sand layer all as directed by Engineer - In - Charge. |
| 48 | CODE NO : Non PSR: Construction of roughening filter in brick work of 23cm wall with CM 1:4 for the inner measurement of size 0.60x.40x0.90m over 10cm thick PCC 1:5:10 the inner faces of the fillter should be plastered with CM 1:4 15mm thick and neat finished.The top of filter should be covered with 8 cm thick RCC precast slab with reinforcement of 100kg/Cum.The chamber should be partined with half B/W inCM 1:4 for 60 cm, from botton 6 to 12 mm size pebbles for 40 cm and course sand for 20 cm shall be filled. |
| 49 | CODE NO : Non PSR: Providing and fixing PVC single equal plain junction of required degree 110 x110 x110 mm dia |
| 50 | CODE NO: Non PSR: Providing and fixing PVC single equal plain junction of required degree 75 x75 x75 mm dia |
