Repair Maintenance Of Electrical And Mechanical Services At Burari Hospital Burari Delhi Sh Comprehensive Maintenance Of Low Side Hvac Equipments And Miscellaneous Work Of Hvac System
Tender Value
22.10 Lakhs
Estimated cost
Bid Submission
16 Aug 2024
0 days left
EMD
44218
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
burari → Delhi
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
repair maintenance of Electrical And Mechanical Services At Burari Hospital Burari Delhi Sh Comprehensive Maintenance Of Low Side Hvac Equipments And Miscellaneous Work Of Hvac System
BOQ
| Sl. No. | Item Description |
| 1 | Comprehensive Maintenance of HVAC System including repair of various pumps, motors, variable frequency drive, AHUs, Hot water Generator, Cooling Tower, FCUs, Inline Propeller Fan, UVGI, Basement Ventilation Fan, Electrical Panel etc complete as required. |
| 2 | Primary Chiller water Pumps - 04 Nos |
| 3 | Secondary Chiller water Pumps - 06 Nos |
| 4 | Condensorwater Pumps - 04 Nos |
| 5 | Cooling Tower = 3 Nos |
| 6 | AHU with dampers = 54 Nos |
| 7 | Hot water Generator= 2Nos (400KW) |
| 8 | Fan coil unit- 57 Nos. |
| 9 | Inline fan- 100 Nos. |
| 10 | Propeller fan -160 Nos. |
| 11 | UVGI - 16 Nos. |
| 12 | Ventilation fans in basement 1& 2 with control panels. Lot = 128 Nos |
| 13 | Supplying, fixing, testing and commissioning of following valves, gauges and strainers for condenser water circulation as per specifications. |
| 14 | BUTTERFLY VALVE (MANUAL) with C I body SS disc nitrile sheet & O - ring & PN 16 pressure rating as specified. |
| 15 | 250 mm dia |
| 16 | 200 mm dia |
| 17 | 125 mm dia |
| 18 | Providing and fixing in position the industrial type pressure gauges with gun metal / brass valves complete as required. |
| 19 | Providing & fixing in position the mercury in glass industrial type thermometers. |
| 20 | Supplying, laying/ fixing, testing and commissioning of following thickness resin bonded fiber glass pipe section insulation having density 80 kg/cum or mineral wool (non combustible) having density of 144 Kg/ cu m duly covered with a layer of 120 gm/sqm polythene sheet (vapour barrier) on existing pipe and finally applying 0.63mm aluminium sheet cladding complete with type3 , grade 1 roofing feltstrip (as per IS:1322 as amended up to date) at joints etc. as per specifications and as required. |
| 21 | 50mm |
| 22 | Supply, installation, balancing and commissioning of factory fabricated GSS sheet metal rectangular/round ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per approved drawings and specifications of following sheet thickness complete as required. |
| 23 | Thickness 0.63 mm sheet |
| 24 | Supplying & fixing of powder coated extruded aluminium Supply Air Grills with aluminium volume control dampers as per specifications. |
| 25 | Supplying & fixing of powder coated extruded aluminium Return Air Grills with louvers but without volume control dampers complete as required. |
| 26 | Supplying, fixing testing commissioning of supply air diffusers of powder coated aluminium with aluminium volume control dampers with anti smudge ring & removable core. |
| 27 | Painting with synthetic enamel pant of approved brand and manufacture to give an even shade: |
| 28 | Two or more coats om new work |
| 29 | Supplying, Installation, testing and commissioning of pre filter of air handling unit in frame of 50mm thick washable type of suitable size complete as required at site. |
| 30 | Supplying & replacement of Hepa Filters Flanged / Box type of following size with Aluminum sheet construction having an efficiency of 99.9% down to 03 micron with rubber gasket i/c dismantling of existing worn out filters, nut bolts etc. complete as reqd. |
| 31 | 610mm X 610mm / 610 mm x 305 mm |
| 32 | Repairing of submersible / monoblock pump with PVC insulated copper winding wire including cutting the burnt winding wire and dismantling the same etc as reqd. at site |
| 33 | 1 HP |
| 34 | 3 HP |
| 35 | 5 HP |
| 36 | 7.5 HP |
| 37 | 10 HP |
| 38 | Supply, Installation, Testing, & Commissioning of following specification ball valves (brass) in dirt legs complete with nipples, socket and end plug etc. as required per specifications. (Make : Castle) |
| 39 | 15 mm dia |
| 40 | 25 mm dia |
| 41 | P/F of PVC pipe of size 25 mm dia along with accessories and insulation for draining of condensate to a safer disposal point in recess / surface i/c the cutting the chase in the wall and making good the same with cement work etc complete as reqd. |
| 42 | P/F of PVC pipe of size 32 mm dia along with accessories and insulation for draining of condensate to a safer disposal point in recess / surface i/c the cutting the chase in the wall and making good the same with cement work etc complete as reqd. |
| 43 | Supplying and fixing of following sizes of FRLS PVC insulated and FR PVC Round Sheathed, Copper Conductor armoured (flexible) cable, 1100 Volt, in the existing surface/recessed/Open / Channel etc as required. |
| 44 | 3c x 2.5 Sq. mm |
AI Tender Summary
Tender Timeline
Aug 08, 2024
11:30 IST
Tender Published
Tender notice published.
CompletedAug 16, 2024
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedAug 16, 2024
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender