33/11 Kv Sub Center Work.

Sharing tender

Safely cartage of25 KVA T/F from ESC, SRE to site of work including loading & unloading at both ends. (Dist.Up to 40 Km.) 3 Safely cartage ofPCC poles 8.5 Mtr. long from ESC, SRE/JE store to site of work at various sites including loading & unloading at both ends. (Dist.Up to 40 Km.) 4 Safely cartage ofSTP poles 11 Mtr. long from ESC, SRE/JE store to site of work at various sites including loading & unloading at both ends. (Dist.Up to 40 Km.) 5 Safely Carriage of Fuse setfrom ESC SRE to site of work including loading and unloading at both ends 6 Safely Carriage of 11 KV Metering Cubical& 11 KV CT/PT Unit from ESC SRE to Site of work including loadign and unloading at both ends. 7 Safely cartage of other complete line material(Except PCC/ST Poles) from ESC, SRE/JE store to site of work at various sitesincluding loading, unloading at both ends.( Dist.Upto 40 Km.) 8 Safely Installation of CT/PT Unit and connection properly. 9 Safely Installation of Metering cubical and connection properly. 10 Erection of single support onPCC/ST poles up to 8.5/11 MtrLong with complete fitting of all accessories of11 KV/LT line.as per RESSPO specification. 11 Safely Installation of Fuse Set and connection properly 12 Providing of MS nuts & bolts & washers off size 13 Laying, lifting, Stringing, sagging jumpring & binding of ACSR Weasel Conductor for 11KV/LT Lineincluding complete. 14 Guarding work 15 Laying lifting and stringing proper sagging ABC cable of size 3x50 sq.mm including fixing of all type clamp and connector providing all accessories. 16 Grouting of STP 11 Mtr long with cement concreting in bolck of 600X600X1500 MM. in ratio 1:4:8 with cement, sand and brick ballast size 1x1.5 with plinth. 17 Safely Installation of Fuse Set and connection properly 18 Earthing of Pole by earthing Rod 19 Laying of 11 KV XLPE cable 3x70 Sqmm 20 Making and fixing cable jointing kit size 3x70 sq.mm O/D & I/D Type. 21 Providing and fixing of All type clamp 22 Providing and fixing of Stone Pad 23 Providing and fixing of Holding Clamp 24 Providing and fixing of Stay Clamp 25 Providing and fixing of J-hook with clamp 26 Grouting and Fixing of stay rods by digging of pits in block 600x600x300 MM & cementconcreting in ratio 1:4:8 with cement, sand and brick ballast and nozzling of stay wire 7/10 SWG and fitting the same on the pole including fixing of stay insulator in stay wire. 27 Fabrication and erection of double pole on 8.5 Mtr. long PCC Poles/11 Mtr Long STP Pole with complete fitting e.g channel bracings etc. including fitting of Disc/Pin insulators duly grouted with cement concreting in block of 450x450x1500mm.in ratio 1:4:8 with cement, sand and brick ballast size 1x1.5. with plinth as per RESPO specifications 28 Safe installation of 25KVA T/F on the D/p with complete fittings including making HT connections and commissioning. 29 Laying of LT/XLPE cable 3.5x70 sq.mm as per respo specification.