Tender For Full Deposit Work In The Area Of Edd Behat

Sharing tender

Tender For Full Deposit Work In The Area Of Edd Behat; 1 Detail of Work 2 Safely cartage of25 KVA T/F from ESC, SRE to site of work including loading & unloading at both ends. (Dist.Up to 40 Km.) 3 Safely cartage ofPCC poles 8.5 Mtr. long from ESC, SRE/JE store to site of work at various sites including loading & unloading at both ends. (Dist.Up to 40 Km.) 4 Safely cartage ofSTP 11 Mtr. long from ESC, SRE/JE store to site of work at various sites including loading & unloading at both ends. (Dist.Up to 40 Km.) 5 Erection of single support on ST/ PCC poles up to 8.5/9/11 MtrLong with complete fitting of all accessories of11 KV/LT line.as per RESSPO specification. 6 Safely cartage of other complete line material(Except PCC/ST Poles) from ESC, SRE/JE store to site of work at various sitesincluding loading, unloading at both ends.( Dist.Upto 40 Km.) 7 Safely Carriage of Fuse set from ESC SRE to site of work including loading and unloading at both ends 8 Providing of MS nuts & bolts & washers off size 9 Laying, lifting, Stringing, sagging jumpring & binding of ACSR Weasel Conductor for 11KV/LT Lineincluding complete. 10 Grouting of PCC 8.5 Mtr long with cement concreting in bolck of 600X600X1500 MM. in ratio 1:4:8 with cement, sand and brick ballast size 1x1.5 with plinth. 11 Safely Installation of Fuse Set and connection properly 12 Earthing of Pole by earthing Rod 13 Fixing of stay rods by digging of pits in block 600x600x300 MM & cementconcreting in ratio 1:4:8 with cement, sand and brick ballast and nozzling of stay wire 7/10 SWG and fitting the same on the pole including fixing of stay insulator in stay wire. 14 Fabrication and erection of double pole on 8.5 Mtr. long PCC Poles/11 Mtr Long STP Pole with complete fitting e.g channel bracings etc. including fitting of Disc/Pin insulators duly grouted with cement concreting in block of 450x450x1500mm.in ratio 1:4:8 with cement, sand and brick ballast size 1x1.5. with plinth as per RESPO specifications 15 Safe installation of 25KVA T/F on the D/p with complete fittings including making HT connections and commissioning. 16 Providing and fixing of All type clamp 17 Laying of LT/XLPE armoured cable 4x25 sq.mm as per respo specification.