|
| 1 | छोट्या वाहनावरील जेटिंग मशीन करिता स्पेअरपार्टस पुरवीणे. |
| 2 | Jetting Pump 20LPM To 21LPM Max.Pressure Up To 210 Bar 1000 RPM |
| 3 | Petrol Engine -Honda Make,4 Stroke Air Cooled,Single Piston Petrol Engine With Electric Start (Self Start) 6 H.P.at 3000 RPM (NB-DIN 6270) |
| 4 | Diesel Engine -Kirloskar /GreavesMake,4 Stroke Air Cooled,Single Piston Diesel Engine With Electric Start (Self Start)10 H.P.at 3000 RPM (NB-DIN 6270) |
| 5 | Jetting Hose Per Meter Size 3/8\" |
| 6 | Jetting Hose Per Meter Size 1/4\" |
| 7 | OIL SEALS |
| 8 | 1/4\" |
| 9 | 1/2\" |
| 10 | 3/8\" |
| 11 | 3/4\" |
| 12 | (O) Rings |
| 13 | 1/4\" |
| 14 | 1/2\" |
| 15 | 3/8\" |
| 16 | 3/4\" |
| 17 | Dowty Washers |
| 18 | 1/4\" |
| 19 | 1/2\" |
| 20 | 3/8\" |
| 21 | 3/4\" |
| 22 | Y Strainer assembly (Inlet/Outlet-dia.) |
| 23 | Inlet/Outlet-dia. 1\" |
| 24 | Inlet/Outlet-dia. 1.5\" |
| 25 | Ball Cock with Knob |
| 26 | 1/2\" SS Material (High Pressure Side) |
| 27 | 1\" Brass (Suction side) |
| 28 | SPRAY GUN - Spray gun Which can withstand pressure Up to 300 Bars |
| 29 | Jetting Nozzle - Conical standard Nozzle to withstand 250 Bar pressure , SS construction Suitable for Jetting Drain pipe |
| 30 | SPRAY GUN Nozzle-(Suitable for above Sr. No. 11) |
| 31 | New Starter Assembly (Suitable for above Petrol Engine, Sr. No. 2) |
| 32 | New Starter Assembly (Suitable for above Diesel Engine, Sr. No. 3) |
| 33 | Starter Switch with wiring (Ignition Switch) |
| 34 | Coupling of Hose Reel (Rotary joint) |
| 35 | Coupling assembly (with rubber spider) of jetting pump and Engine (Jaw type) |
| 36 | Hose Reel (Siutable for Winding rubber hose dia 3/8\" up to 30 mtr. Length) |
| 37 | Rubber Spider for jetting pump - Engine Coupling (Sr. no.18) |
| 38 | D.C.Cable (inner & outer) |
| 39 | Stopper Cable (inner & outer) |
| 40 | Air Filter for Petrol / Diesel Engine (Suitable for, Sr. No. 2 & 3) |
| 41 | Pressure Regulator 0to 210 Bar (Make Comet/IPH) |
| 42 | Injector for above Diesel engine Sr. No. 3 (Bosch) |
| 43 | Spark plug For above Petrol engine Sr. No. 2 (Bosch) |
| 44 | Manila wire rope( To manually startPetrol engine)(Rate per Meter) |
| 45 | Clear Flexible PVC Spring type water pipe (food grade) (Tank to pump) (Rate per meter) |
| 46 | Dia- 1\" |
| 47 | Dia- 1.5\" |
| 48 | Adapter for water connections (Anodised MS) |
| 49 | A.1/4\" |
| 50 | B.1/2\" |
| 51 | C.3/8\" |
| 52 | D.3/4\" |
| 53 | E.1\" |
| 54 | F.1½\" |
| 55 | Foundation pads With Nut Bolt High Tensile (Per set) (for Petrol / Diesel EngineSr. No. 2 & 3) |
| 56 | FoundationWith Nut Bolt High Tensile (Per set) (for jetting pumpSr. No. 1) |
| 57 | All types of connector for water connections ( \"T\" & \"L\" Types) |
| 58 | A.1/4\" |
| 59 | B.1/2\" |
| 60 | C.3/8\" |
| 61 | D.3/4\" |
| 62 | Duplex sprocket reduction chain drive assembly ( 2:1 reduction) (For Engine:Jetting pump) |
| 63 | Driving sprocket (approx no. of teeth 14 ) (For Duplex chain drive sr. no. 33) |
| 64 | Driven sprocket (approx no. of teeth 26 ) (For Duplex chain drive sr. no. 33) |
| 65 | Driving chain (For Duplex chain drive sr no. 33) (rate per meter) |
| 66 | Key for Driving Sprocket (For Duplex chaindrive sr no.33) |
| 67 | Key for Driven Sprocket(For Duplex chaindrive sr no.33) |
| 68 | PTO pump & Hydraulic motor assembly suitable for TATA ACE HT BS IV |
| 69 | PTO pump & Hydraulic motor assembly suitable for TATA SUPER ACEBS IV |
| 70 | SERVICING CHARGES PER MACHINE |
| 71 | Driver pulley with \"v \"Groove (Dia- 3\") |
| 72 | Driven pulley with \"v \"Groove (Dia-5\") |
| 73 | \"v\" belt size 1175 (or Suitable for Engine to pump) |
| 74 | PTO Cable for ashok leyland dost |
