Tender For Medical Services (Mgps) Additional Items At Shri Vinoba Bhave Civil Hospital Campus Phase-I, Silvassa.

Sharing tender

Medical Services (Mgps) Additional Items At Shri Vinoba Bhave Civil Hospital Campus Phase-I, Silvassa.-Supply, Installation, Testing and Commissioning of PRS for LMO : Pressure and flow control skidwith kit with interconnecting pipe : It will be supplied Safety valve, Long stream globe valve, Isolation Valve, Duplex High Pressure Regulator of 600nm3 alongwith Pressure guage 2 Supply, Installation, Testing and Commissioning of Oxygen Switch over vie control panel : It should complies with Health Technical Memorandum standards. Oygen from the VIE at 1050 kPa (10.5) bar and to reduce the pressure to a nominal 420 kPa (4.2 bar) pipeline distribution system pressure.Control panels are designed to regulate line pressure 28mm, sized pipe line. Mounted on a light weight mild steel zinc plated and passivated back plate assembly. It should be light weightless the 70Kg. All components degreased for oxygen use. Mild steel powder coated enclosure with inlet and outlet pressure gauges.Pressure Sensors : Pressure switches monitor inlet pressure. Dual line pressure switch monitor (high and low pressure). Pressure Reduction Capacity : Maximum inlet pressure: 2,800 kPa (28 bar). Outlet pressure reduced to: 420 kPa (4.2 bar). Flow Rate : 28mm system 2500-3,000 L/min. Relief Valve Settings : Nominal 4 bar manifold 550kPa (5.5 bar). 3 Supply, Installation, Testing and Commissioning of Lockable Line Valves size 76mm As per HTMStandard complies . Pre Piped Degreased Ball Valve with pipe extension. 4 Supply, Installation, Testing and Commissioning of Oil Free SCROLL Air Compressor (Total 6 air compressors) 3 air compressor of 85cfm (2350lpm each) running to produce 7000lpm as working and 3 air compressor of 85cfm (2350lpm each) to produce 7000lpm as stand by(5% tolernce will be allowed) 5 Supply, Installation, Testing and Commissioning of Medical Breathing Air Dryer System 2 air dryer as working and 2 air dryer as stand by. Stage one (X1) : Removes bulk liquid, particles and coalesced oil aerosols down to 0.1mg/m³ Stage two (XA) : Grade XA filtration removes liquids. Submicron particles and oil aerosols down to 0.01mh/m³. Stage three (PDBA) : Removes moisture down to -40°C (-40°F) and C ppm removes CO maintaining levels to less than 5ppm Stage Five (RAC): A combined activated carbon filter to remove odour, tastes and oil vapour and a particulates filter to remove down to 0.01 micron. 6 Supply, Installation, Testing and Commissioning ofAdditional 4 Stage Air Filter for 4 Bar 1no. Coarse coalescing filter with air quality standard ISO 8573-1: 2010. Element of E30612 grade 1no. Fine coalescing filter with air quality standard ISO 8573-1: 2010. Element of E30612 grade 1no. Fine Dust Filter with air quality standard ISO 8573-1: 2010. Element of E30612 grade 1no. Activated Carbon Filter with air quality standard ISO 8573-1: 2010. Element of E30612 grade 7 Supply, Installation, Testing and Commissioning ofAdditional 4 Stage Air Filter for 7 Bar 1no. Coarse coalescing filter with air quality standard ISO 8573-1: 2010. Element of E30612 grade 1no. Fine coalescing filter with air quality standard ISO 8573-1: 2010. Element of E30612 grade 1no. Fine Dust Filter with air quality standard ISO 8573-1: 2010. Element of E30612 grade 1no. Activated Carbon Filter with air quality standard ISO 8573-1: 2010. Element of E30612 grade 8 INR Zero Only