Tender For Providing 30000 Oht Tank At Padur Colony In Padur Panchayat
Tender Value
18.42 Lakhs
Estimated cost
Bid Submission
09 Aug 2024
0 days left
EMD
46050
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
poonamallee → Tamil Nadu
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Providing 30000 Oht Tank At Padur Colony In Padur Panchayat
BOQ
| Sl. No. | Item Description |
| 1 | 1.Construction of Overhead tank 30000 Lit Capacity(Raft foundation) at Padur colony in PadurPanchayat |
| 2 | Earth work excavation & depositing on bankwith an initial lead of 10 metre & initial lift of 2 metre in Hard shift clay, stiff block cotton, hard red earth shales, murrum, gravel, stoney earth, and earth mixed with small size boulders and hard gravelly soil (SS 20B) for foundation including shoring, strutting, baling out water providing danger light wherever necessarydepositing thesurplus earth on bank and otherincedential charges |
| 3 | First depth of 2m From 0 to 2 m below GL |
| 4 | Second depth of 2m From 2m to 4 m below GL |
| 5 | Sand filling for foundation with clear river sand including cost of sand, watering,ramming andconsolidation etc complete as directed by TWAD Bord officers |
| 6 | Plain Cement Concrete 1:4:8 (one cement, four sand and eight hard granite broken stone of 40mm size ISS gauge) forfoundation and footing including mixing, placing, ramming ,finishing curing etc. complete in accordance with standard specification and as directed by the TWAD Board Officers. |
| 7 | Reinforced Cement Concrete Mix M30 grade using 10mm & 20mm Hard blue granite Broken stone (machine crushed)excluding the cost of RTS rods for reinforcement and centering, strutting, shutteringbut including cost of all materialsmixing, laying, Vibrating the concrete with mechanical vibrators, ramming, consolidating,finishing and curing etc., Complete and as directed by the TWAD Board Officers. |
| 8 | For items 1.5mbelow GL |
| 9 | For items 0 to 1.50m below GL |
| 10 | 0m to 4.50m above GL |
| 11 | 4.50 m to 7.32 m above GL |
| 12 | 7.32 m to 10.98 m above GL |
| 13 | 10.98 m to 14.64 m above GL |
| 14 | 14.64 m to 18.30 m above GL |
| 15 | Supplying and erecting steel centering for sides and soffits I including necessary supports\" and shuttering to the required height for RCC items using MS sheets of suitable size of BG.10 stiffeneq with welded MS angles of size 25mm x 25mm x3mm of boarding, laid over silver oak joints of size 10cm x 6.5cm spaceqat 90cm centre to centre and supported by 40mm GI pipes spaced at 75cm centre to centre complying with standard specifications etc., complete |
| 16 | Below GL |
| 17 | From GL to 3.30m |
| 18 | From 5.30m to 6.30m above GL |
| 19 | From 8.30m to 9.30m above GL |
| 20 | From 11.30m to 12.30m |
| 21 | Square column |
| 22 | Square Column Below GL and upto 3.30m above GL |
| 23 | 3.31m to 4.30m ht |
| 24 | 4.31m to 5.30m ht |
| 25 | 5.31m to 6.30m ht |
| 26 | 6.31m to 7.30m ht |
| 27 | 7.31m to 8.30m ht |
| 28 | 8.31m to 9.30m ht |
| 29 | 9.31m to 10.30m ht |
| 30 | 10.31m to 11.30m ht |
| 31 | 11.31m to 12.30m ht |
| 32 | Curved surface |
| 33 | 11.30m to 12.30m |
| 34 | 12.30m to 13.30m |
| 35 | 13.30m to 14.30m |
| 36 | 14.30m to 15.30m |
| 37 | Supplying, cutting, bending, tying, fabricating and placing in position of steel rods for all RCC works including cost of steel and binding wire etc.( The steel should conform to the relevant ISspecificationand supplied with test certificateFe. 415 grade as per IS specification No.1786/1985 and as amended from time to time)delivery at site of work including loading, freight, unloading,stacking,transit insurance charges, taxes etc. complete.and as directed by the TWAD Board officers. |
| 38 | Painting two coats with approved cement paint over one priming coat of white cementover cement plastered wall surface and ceiling including cleaning preparing the surface and curing etc., complete (using cement paint of colour as approved by the Departmental officer) and as directed by the TWAD Board officers. |
| 39 | Fabrication, supply, delivery and fixing of outside MS Ladder of 45cmclear wide made out of 50 mm x 50mm x 6mm MS angle for both sides and for steps at 30cm C/C welded jointed etc ., for I staging from GL to 1st level brace (weight 4.5kg/m) IInd and IIIrd staging upto floor slab and IVth staging from floor slab to roof top. Supply, delivery and fixing of 32 mm GI pipes medium for hand rails from I stage to IVth stage. RCC M30 Grade mix for Landing slab 5 nos. at Ground Level- 1No. and above Ground Level - 4Nos. Supply and fixing of 32mm GI pipe medium for hand rails for the Landing slab. Supplying and fixing of MS Base plate of 100mm X 100mm X 6mm thick for fixing Anchore fastener bolt for fixing of hand rails at Landing slab and MS Ladder providing locking arrangements with two coats of approved enamel paint over one coat of red oxide paint as per approved Type Design and as directed by TWAD board officers. |
| 40 | Providing and fixing of RCC inner access ladder in RCC 1:11/2 :3 (one cement,one and half sand and three aggregate) using 20mm HBG stone for OHT including cost of reinforcement, placing grill in position, centring,shuttering charges, mixing concrete,curing etc. to required height and clear width of 45 cm consisting of 2 nos. of vertical post of 10 cm x 15 cm and step slab of 25mm x 25mm etc.complete and as directed by TWAD Board Officers. |
| 41 | Providing 110mm PVC vent cowlarrangementsmosquito proof nylon net and as directed by TWAD Board officers |
| 42 | Supply and fixing of cut stone of size 0.30m x 0.30m x 0.15m in CM 1;3(one cement and three sand) below inlet pipe for Service Reservoir as directed by TWAD Board Officers. |
| 43 | Providing manhole cover of size 0.60 x 0.60M in RCC 1:1.5:3 with suitable reinforcement and 50x50x6mm MS angle fixed along edges and as directed by TWAD Board officers |
| 44 | Painting RD Board emblem on the SR with enamel paint as per Board\"s specification and as directed by TWAD Board officers |
| 45 | Pipe connection arrangements for inlet,outlet,scour and overflow etc. including cost of pipes,specials,valve,labour charges for lifting, aligning, cutting, threading,fixing and painting of GI pipes with two coats of approved quality enamal paint etc. complete as detailed below. |
| 46 | 65mm GI pipes for Inlet and Outlet P40-5.0-7 |
| 47 | 65mm GI pipes for over flow & rain water harvesting pipeP40-5.0-7 |
| 48 | 50mm GI pipes for scour pipe P40-5.0-6 |
| 49 | 65mm GI pipe for delivery pipe P40-5.0-7 |
| 50 | 90mm PVC Threaded coupler P27-2 |
| 51 | 63mm PVC Threaded coupler P27-1.5-10 |
| 52 | 65mm dia GI Tee P44-5.1B-2 |
| 53 | 65mm dia GI bend 90 P44-5.1B-9 |
| 54 | 65mm GI coupler P44-5.1B-3 |
| 55 | 65mm GI union P44-5.1B-10 |
| 56 | 65mm GI Elbow P44-5.1B-1 |
| 57 | 50mm GI union P-44-5.1B-10 |
| 58 | 50mm GI Elbow P44-5.1B-1 |
| 59 | 65mm GI Tee P44-5.1B-2 |
| 60 | 65x50mm GI reducer P41-5.1q-15 |
| 61 | 75mmx63mm PVC reducer P25-1.4-2 |
| 62 | 65mm GM gate valve P45-5.2-1 |
| 63 | 50mm GM gate valve P45-5.2-2 |
| 64 | 90 mm PVC 4Ksc PipeP21 -1.0 -3 |
| 65 | Refilling the foundation with excavated earth including consolidation as directed by the TWAD Board officers |
| 66 | Labour charges for GI pipe connection to the OHT, for inlet, outlet, overflowand scour arrangements including cutting and threading, earth work excavation & refilling. |
| 67 | Providing Hand rails over the Roof slab by using 32 mm GI Pipe with 40mm x 6mm MS Flat and fixied with 12mm dia Fastner Bolt 75mm long and as directed by TWAD Bd officers |
| 68 | Providing Hand rails over the Standing Platform by using 32 mm GI Pipe with 40mm x 6mm MS Flat and fixied with 12mm dia Fastner Bolt 75mm long and as directed by TWAD Bd officers |
| 69 | GST Amount for providing Service to Government Contract Works for the above Construction & Maintenance Works. { GST Amount is the Total GST Amount for overall quoted amount (Both Construction and Maintenance) above this row in column \"BB\" for all works in this package}(Refer Clause 13.2 & 13.3 of Section 2 of Instruction to Bidders (ITB) of SBD) |
AI Tender Summary
Tender Timeline
Aug 02, 2024
11:30 IST
Tender Published
Tender notice published.
CompletedAug 09, 2024
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedAug 09, 2024
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender