Regarding Running Tender For New Connection On Jhatpat Portalfull Deposit Work Scheme And Sansad Nidhi/Vidhayak Nidhi Depositwork In The Area Of Edsd-I, Mawana Edsd-2 Phalawda, Under Edd-I, Mawana Under Edc-2

Sharing tender

Regarding Running Tender For new Connection On Jhatpat Portalfull Deposit Work Scheme And Sansad Nidhi/Vidhayak Nidhi Depositwork In The Area Of Edsd-I, Mawana Edsd-2 Phalawda, Under Edd-I, Mawana Under Edc-2. - Cartage of following material from store center Meerut to JE Store including loading & unloading at both ends maximum distance up to 40 Km. :– 2 A) PCC Pole 8.5 mrt long/ST pole 11 mtr long. 3 B) 11 KV XLPE Cable of Different sizes 4 C) 250 KVA T/f. 5 D) 11 KV CT/PT unit of Different size 6 E) 11 KV Jointing Kit of Different size 7 F) 11 KV Pilfer proof Cubical of Different size 8 Cartage of line material from store centre to dump site & then dump site to site of work on day to day basis, including loading & unloading at both ends maximum distance up to 20 Km. (App. 85 Qtl.) 9 Cartage of 10 KVA to 100 KVA Transformer from store centre to site of work including loading & unloading at both site 10 Cartage of following material from JE Store to site of work including loading & unloading at both ends maximum distance up to 40 Km. :– A) PCC Pole 8.5 mrt long/ST pole 11 mtr long. 11 B) 11 KV XLPE Cable of Different sizes 12 C) 250 KVA T/f. 13 D) 11 KV CT/PT unit of Different size 14 E) 11 KV Jointing Kit of Different size 15 F) 11 KV Pilfer proof Cubical of Different size 16 Dissmentling of Damaged & Broken P.C.C./ S.T.Pole/R.S. Joist by digging the pits & removel of complete H.T./L.T. line accessories . 17 Eartingh of each 11 KV line pople & T/F properly after drive of electrodes if size 20mmx250mm and connection the earthing point with GL wire. 18 Erection ofPCC pole 8.5 mtr long/STP Pole 11 mrt long after digging a pit of size 1.20 x 0.60 x 1.6 mtr in all type of Soil including back filling of the pole with proper ramming after completion of work. 19 Fabrication and fixing of all 11 KV H.T/L.T. line accessories. 20 Erection of Double pole on PCC pole 8.5 mtr after digging of pit of required size including fabrication and fixing of Top channel, droper channel & base channel alongwith, fixing all 11 KV accessories TPMO, Fuse set 11 KV pin insulators and making connection properly. 21 Construction of new Plinth for 250 KVA TO 400 KVA 22 Providing and fixing wiremess fencing for 250 KVA TO 400 KVA 23 Chemical Earthing for 250 KVATO 400 KVA t/f neutral and body complete 24 Mounting of 10,25,63,100KVA T/F with proper jumping of HT side and fixing of cable on LT. side of T/F making connection properly. 25 Mounting of 250 to 400 KVA T/F with proper jumping of HT side and fixing of cable on LT. side of T/F making connection properly. 26 Making a section pole to exist pole after fabrication & fixing of T channel fixing of all 11 KV accessories. 27 Erection of stay rod complete after digging a pit of size 1.20 x 0.60 x 1.6 mtr and grouting the same in block of size 0.60 x 0.60 x 0.30 mtr and nuzzling at the both ends and filling the pit with excavated earth soil with proper ramming. 28 Laying lifting stringing of proper sagging of ACSR Weasel/Rabbit/Dog conductor for 3 phase, 3 wire 11 KV line including binding & jumpering properly. 29 Laying lifting stringing of proper sagging of 11 KV XLPE Cable of different sizes with filling jointing kit different size. 30 Laying lifting & sagging of LT line with A.B. Conductor of different size including proper binding & jumpring (3x50, 3x95, 3x120 sqmm.) 31 Laying lifting & sagging of LT line with Single Phase A.B. Conductor of size 1x16 sq.mm. including proper binding & jumpring. 32 Grouting of PCC/ST poles with Dust, Cement & Stone blast concreting. 33 Cutting & chopping tree branches near side of line for making the clearance between line and tree (near about 100 branches). 34 Fixing of LT distribution box along with providing clamp Nut & Bolts 35 Providing and fixing stay clamps . 36 Providing and fixing F Clamp 37 Providing and fixing Holding Clamp 38 Providing and fixing LT clamps . 39 Providing and fixing LTInsulator clamps . 40 Providing and fixing Piercing Clamp. 41 Providing and fixing Dead & End Clamp. 42 Providing and fixing Telless unit 43 Providing and fixing Suspension Clamp. 44 Providing and fixing Bolt and Nuts .