Tender For Running Works Contract In North Kangeyam Sub Division
Tender Value
5 Lakhs
Estimated cost
Bid Submission
07 Aug 2024
0 days left
EMD
5000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
kangeyam → Tamil Nadu
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Running Works Contract In North Kangeyam Sub Division Running Works Contract For The Erection Works Of Lt Overhead Feeder, Ht Overhead Feeder, Structure Erection Works, Pre Monsoon Maintenance Work, Natural Calamities Work And All Other Improvement Works Pertaining To North Kangayam Sub Division
BOQ
| Sl. No. | Item Description |
| 1 | Excavation of Pole / stay pit for pole upto 8.00m length by using JCB/Manual. [ Pole -(1.25 x 0.6 x 1.5m), Stay - (0.95 x 0.6 x 1.2m).] |
| 2 | Excavation of Pole pit for pole above 8.00m length by using JCB/Manual (1.25 x 0.6 x 1.83m) |
| 3 | Excavation of Pole / stay set pit in Hard Soil (common to all size of poles). [Specific approval should be obtained from concerned EE] |
| 4 | Excavation of Pole / Stay pit in rocky area (common to all size of poles) by blasting / Manual. [Specific approval should be obtained from concerned EE] |
| 5 | Erection of RCC, REC, PSC poles upto 8.00m length by using Crane / Manual |
| 6 | Erection of RCC, REC, PSC poles above 8.00m length by using Crane / Manual |
| 7 | Erection of metal supports above 9m / RSJ / Rail Pole/Tubular Poles |
| 8 | Erection of stay set complete with fixing up stay wire Eye, Bow, Guy Shackle, Binding etc. |
| 9 | Erection of additional Stay in the same stay rod, excluding excavation of stay pit and burial of stay rod. |
| 10 | Erection of stay set complete in the rock area by blasting |
| 11 | Set right of all sizes of leaning HT/ LT poles [Pin point] |
| 12 | Set right of all sizes of leaning HT/ LT poles [Cut point] |
| 13 | V cross arm 3.5feet |
| 14 | V cross arm4.5 feet |
| 15 | V cross arm5.0 feet |
| 16 | Fixing of LT S phase cross arm |
| 17 | Fixing of LT 3 phase cross arm |
| 18 | Fixing of Tapping Channel Cross Arm |
| 19 | Fixing of Guarding Cross Arm |
| 20 | Fixing of Double channel-X-Arm |
| 21 | Fixing of HT / LT Ti fitting |
| 22 | Fixing of HT PIN insulator with Pin 11 kv |
| 23 | Fixing of HT PIN insulator with Pin 22 kv |
| 24 | Fixing of HT PIN insulator with Pin 33 kv |
| 25 | Fixing of LT PIN insulator |
| 26 | Fixing of HT strain disc 11 KV |
| 27 | Fixing of HT strain disc 22 KV |
| 28 | Fixing of HT strain disc 33 KV |
| 29 | Fixing of shackle |
| 30 | Fixing of Aluminium knob |
| 31 | Fixing of open type fuse unit |
| 32 | Fixing of LT capacitor |
| 33 | Fixing of HT LAS (3 Nos.) |
| 34 | Fixing of LT LAS (3 Nos.) |
| 35 | Paving and stringing of conductors of sizes upto 7/2.59 mm ACSR or other equivalent conductor. |
| 36 | Paving and stringing of conductors ofabove7/2.59 mm ACSR or other equivalent conductor upto 7/3.35mm ACSR or other equivalent conductor. |
| 37 | Paving and stringing of conductors of7/4.09mm ACSR or other equivalent conductor. |
| 38 | Paving and stringing of conductors of7/4.72 mm Dog Conductor or other equivalent conductor. |
| 39 | Paving and stringing of conductors of one run of PVC cable line of all sizes with GI wire and reel insulator. |
| 40 | Releasing and reerection (only for resagging) of one run of all sizes of conductor. |
| 41 | Resagging of lines for all sizes at cutpoint location per wire / span. |
| 42 | Earthing of poles with GI wires 4 or 6 SWG by coil earthing |
| 43 | Provision of spike including earthing arrangement |
| 44 | Pipe earthing including excavation of earth pit and fixing earth pipe 3 m length |
| 45 | Replacing the corroded earth pipes of transformer structure and replacing the earth wire completely with aluminium lugs for termination |
| 46 | Replacement of corroded earth pipe |
| 47 | Concreting with 1:4:8 mix using 40 mm Jelly including curing (Material + labour) (i) Mass concreting of poles (0.6 x 0.6 x 1.25 m) wih coping. |
| 48 | (ii) Sleeveconcreting(0.6 x 0.6 x 0.3 m) wih coping. |
| 49 | (iii) Stay concreting(0.3 x & 0.75m long). |
| 50 | Erection of Distribution Transformer structure complete as per TNEB standard including painting, feeders arrangrment, colour washing of RCC poles etc.. Fixing of 1 No. open type unit, 3 Nos Earth pits with earth trough, HT / LT LAS and jumpering except erection of Distribution Transformer. |
| 51 | Erection of 11 KV single pole Structure including erection of DT complete without centre support. |
| 52 | Erection / Dismantling of Distribution Transformer including unloading of Distribution Transformer at site and erection at structure or vice versa. By JCB/ Crane. i) Upto 25 KVA Distribution transformer / Metering set. |
| 53 | (ii) Above 25 KVA to 100 KVA |
| 54 | (iii) Above 100 KVA to 250 KVA |
| 55 | (iv) 500 KVA and above |
| 56 | Erection of DP structure with stay as per TNEB standard including fixing of top channel, cross bracing, concreting, painting, colour washing etc.,-With 11 KV AB switch using all types of poles of size 9.14m and above length |
| 57 | Erection of DP structure with stay as per TNEB standard including fixing of top channel, cross bracing, concreting, painting, colour washing etc.,- With 22 / 33 KV AB switch using all types of poles of size 9.14 m and above length |
| 58 | Erection of single pole DP with completeand with single earth |
| 59 | Erection of centre rotating Switch AB Switch complete |
| 60 | Dismantling of 1068 mm (3\"6\") V-X-Arm |
| 61 | Dismantling of 1372 mm (4\"6\") V-X-Arm |
| 62 | Dismantling of 5\" V-X Arm |
| 63 | Dismantling of1ph X -Arm |
| 64 | Dismantling of3ph X -Arm |
| 65 | Dismantling ofTapping channel x arm |
| 66 | Dismantling of Guarding Cross Arm |
| 67 | Dismantling of Double Channel X-Arm |
| 68 | Dismantling of H.T/L.T. T.I. Fitting |
| 69 | Dismantling of 11kv PIN with insulator |
| 70 | Dismantling of 22kv PIN with insulator |
| 71 | Dismantling of 33 KV PinInsulator |
| 72 | Dismantling of LT Pin with Insulator |
| 73 | Dismantling of 11kv Composite Disc with Mp |
| 74 | Dismantling of 22kv Composite Disc with Mp |
| 75 | Dismantling of 33 KV Disc |
| 76 | Dismantling of LT Shackle with Mp |
| 77 | Dismantling of Aluminium knob |
| 78 | Dismantling of LT open type |
| 79 | Dismantling of HT LAS (3 nos) |
| 80 | Dismantling of LT LAS (3 nos) |
| 81 | Dismantling of Top channel |
| 82 | Dismantling of Bed channel |
| 83 | Dismantling of Belting channel |
| 84 | Dismantling of RCC, REC, PSC & metal pole of all sizes including the closing of the pit |
| 85 | Dismantling of stay set complete - including stay rod |
| 86 | Dismantling of stay set complete-- Without stay rod |
| 87 | Dismantling of 7/2.59 conductor including transporting the conductors to the nearest road side and stocking in coils |
| 88 | Dismantling of 7/3.35 conductor including transporting the conductors to the nearest road side and stocking in coils |
| 89 | Dismantling of 7/4.09 conductor including transporting the conductors to the nearest road side and stocking in coils |
| 90 | Dismantling of Dog conductor including transporting the conductors to the nearest road side and stocking in coils |
| 91 | Dismantling of Double pole Transformer structure materials complete set and transporting the same from the location to the road side |
| 92 | Dismantling of Single pole Transformer structure materials complete set and transporting the same from the location to the road side |
| 93 | Engaging Crane per Hour (for handling of poles, Metering set,DT etc) |
| 94 | Engaging JCB per Hour (for extension works & maintenance works etc) |
| 95 | Releasing and erection 1 ph SC wire [during conductor or support change] |
| 96 | Releasing and erection 3 ph SC wire [during conductor or support change] Upto 50 HP |
| 97 | Releasing and erection 3 ph SC wire [during conductor or support change] above 50 HP |
| 98 | Releasing and erection 3 ph SC wire [during conductor or support change] LTCT SC |
| 99 | Drilling of holes in the structure materials clamps etc., |
| 100 | AB switch or open type side arm stud, cutting and drilling holes |
| 101 | Manufacturing of earth pipe clamps for structure including of drilling holes and welding and clamp with earth pipe. |
| 102 | Bush Clearance out side substation yard / office premises (light) |
| 103 | Jungle clearance such as kattu karuvai in the various area without uprooting |
| 104 | Jungle clearance such as kattu karuvai in the various area with uprooting |
| 105 | Clearing of tree braches of coconut trees |
| 106 | Clearing of tree braches of Neem, Tamarind, Country wood etc |
| 107 | Leveling of Ground using Bul Dozer |
| 108 | Clearing of Branches / Trees with JCB |
| 109 | Fencing of Distribution Transformer Structure at Road side- Fabrication andErection.(including all materials) |
| 110 | Maintenance of Distribution Transformer including checking tightness, reconditioning of HG fuse,cleaning of insulators, reconditioning of LT open type,replacement of damaged bushing clamp,topping of transformer oil, bus bar maintanence / renewal / AB switch maintanance,yard cleaning, earth pit watering,silica gel replacing and other related works. |
| 111 | Maitenance of 11 / 22 KV AB Switch with all accessories (Applying Greese, Alignment Checking etc., |
| 112 | Maitenance of existing LT Open type Fuse Unit in Distribution Transformer (Replacement of Insulators, Jumbers etc.,) |
| 113 | Maitenance of existingDistribution Transformer Bus bar (Replacement of Bus bar conductors,Insulators, Jumbers and etc.,) |
| 114 | Maitenance of existingDistribution Transformer HG Fuse set assembly ( Replacement of Insulators, Arc Horn etc.,) |
| 115 | (i) Ground patrolling of HT/LT lines during Breakdown |
| 116 | (ii) Rectification of conductor snapping in HT line Pin point / cut point |
| 117 | (iii) Rectification of conductor snapping in LT line Pin point / cut point |
| 118 | (iv) Replacement of Flashover HT pin insulator/LAS including jumpering,binding and transporting of required materials |
| 119 | (v) Replacement of Flashover strain disc and PT insulator including jumpering,binding and transporting of required materials |
| 120 | Tiding of serviceconnection with erection of clamp jumper in low tension SC/Line aerial Board, Fuse unit and looping |
| 121 | Renewal of jumper from 22/11 kv line to AB Switch to HG Fuse, HG Fuse to Distn. Transformer with PG Clamps |
| 122 | Inspection of HT Insulator / Disc /PT Insulator pole to pole during break Down / routineand premonsoon inspection. |
| 123 | Transportation of all types and sizes of poles and other associated materials from Road side to pole pit and vice versa upto 0.50 KM |
| 124 | Transportation of all type of polesFor a lead upto 5 KM |
| 125 | Transportation of all type of polesAbove 5 KM of lead of every KM |
| 126 | Transport of Metal pole of all sizes by head loads in hill areas from road side to pole pit location (i)Upto 1 KM |
| 127 | (ii) Above 1 KM per each KM |
| 128 | Transporting of conductors of all sizes from road side to pit locations upto one KM of Conductor |
| 129 | Transporting of Distribution Transformer / Line materials from officeto siteby engaging 1 Ton capacity Minidor (Lorry)i) upto 10 KM distance |
| 130 | (ii) Above 10 KM |
| 131 | Painting of all clamps and other iron materials and painting of structure pole. Without paint |
| 132 | SUB TOTAL (Items 1 to 131) |
| 133 | SGST % |
| 134 | CGST % |
| 135 | IGST % |
AI Tender Summary
Tender Timeline
Aug 01, 2024
11:30 IST
Tender Published
Tender notice published.
CompletedAug 07, 2024
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedAug 08, 2024
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender