Bids Are Invited For 9M113m0500009 Support Total Quantity : 2000, Medak-Telangana

Bids Are Invited For 9M113m0500009 Support -1. TERMS & CONDITIONS: a) Required input raw material will be issued by BDL with consumption norm of 1:1 against submission of Indemnity Bond for Rs.1,40,000/- b) Required Nigrosine paint will be in BDL scope. c) Intermediate Heat Treatment & Electroplating operation is in vender Scope. d) All required Jigs, Fixture, Gauges, Tools, Inspection Instruments and Testing Instruments are in vender scope. 2. CERTIFICATES REQUIRED: a) Documents to be submitted along with each batch. b) 100% Dimensional inspection reports. c) Heat Treatment records, Temperature-Time graph for annealing hardening-Tempering. Hardness test report from NABL accredited Lab. d) Plating test certificate. 3. Component shall be free of burrs, cracks and nicks. 4. Supplier to ensure perpendicularity of 0.1 at b of drawing. 5. Suppliers are allowed to outsource HT & EP operations. BDL has right to witness/audit the process at third party where the Heat Treatment and EP operations are carried out. 6. DELIVERY SCHEDULE: Supply of 25 Nos as sample batch should be submitted within one month from the date of issue of FIM and balance with in 3 months from the date of acceptance of the samples 7. SPLIT ORDER RATIO: 60:40. 8. PURCHASE PREFERENCE CLAUSE: Provisions as per Make in India order 2017 will be applicable for the vendors/service providers. 9. LD CLAUSE: Time is the essence of the P.O and delivery should be strictly insisted upon according to the delivery schedule given in the SOs/POs. In the event the supplier fails to deliver the goods/ service, within the stipulated delivery period, BDL reserves the right to recover from the supplier, LD and not by way of penalty an amount as detailed in terms and conditions. A sum of 0.5% of the price only of the stores (Including duties, taxes) which the supplier has failed to deliver as aforesaid for each week of delay or part thereof, subject to a maximum of 10%. In case of extension of delivery period, increase in taxes shall not be borne by BDL, if delay is attributable to vendor. 10. MANUFACTURING OF COMPONENTS: Should be as per the drawing provided by BDL. 11. IN-PROCESS AND FINAL INSPECTION: BDL representatives are authorized to inspect during in process and final inspection at party works as per the requirement. 12. INPUT RAW MATERIALS: to be collected by vender. 13. FINISHED COMPONENTS: should be delivered to BDL stores and shall be packed individually in butter paper to avoid damages. 14. REJECTED COMPONENTS: should be kept separately and should not mix up with accepted components. 15. STAGE INSPECTION: to be carried out by party as per process. 16. TAX DETAILS: GST as applicable.BDL Reserves its right to release GST only after suppliers invoice /debt note is reflected in GSTR -28/2A within the specified time limit mentioned in GST law. 17. PAYMENT TERMS: As Per GEM Payment Clause Payments shall be made to the seller within 30 days of issue of Consignee receipt- cum-acceptance certificate (CRAC) and on-line submission of bills (This is in supersession of 10 days time as provided in clause 12 of Gem GTC). 18. AS9100D STANDARD TERMS: a) The supplier shall not supply the non-confirming product against specification. b) Supplier has to inform BDL in case of change in manufacturing process or input material or manufacturing facility. Unless otherwise specified, supplier cannot outsource the items (order). c) Supplier shall maintain the BDL product and production records up to 3 years. d) In case of non-conformity product, party has to inform BDL for further disposition action (i.e. rework, rejections etc.) e) Where ever applicable Drawing Issue number should be considered which is under column (Drg. No.) 19. EMS 14001:2015 STANDARD TERMS: As BDL is a EMS 14001:2015 certified organization, it is requested you as partner of BDL to maintain EMS standards like proper scrap disposal, maintenance of pollution control board norms and conservation of resources to protect environment. 20. Process rejection allowence: 3% process rejection are allowed. Rejected components shall be returned to BDL. Any rejection owing to casting defect will be replaced based on inspection of QC/SEG department. Total Quantity : 2000

Refer document

Refer document

Refer document