|
| 1 | Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical MeansSSR Pg No./It No. 153/21.02 |
| 2 | Excavation for foundation in earth, soils of all types, sand, gravel and soft murum, including removing the excavated material upto a distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift from 1.5m to 3.0m) By Mechanical MeansSSR Pg No./It No. 153/21.04 |
| 3 | Providing dry/ trap/ granite/ quartzite/ gneiss rubble stone soling 15 cm to 20 cm thick including hand packing and compacting etc. complete.SSR Pg No./It No. 157/21.38 |
| 4 | Providing and laying Cast in situ / Ready Mix cement concrete in M-10 of trap / granite / quartzite / gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying / pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer / concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)SSR Pg No./It No. 175/24.01 |
| 5 | Providing second class Burnt Brick masonry with conventional / I.S. type bricks in cement mortar 1:6 in foundations and plinth of inner walls / in plinth external walls including bailing out water manually, striking joints on unexposed faces, raking out joints on exposed faces and watering etc. Complete.SSR Pg No./It No. 197/27.01 |
| 6 | Providing second class Burnt Brick masonry with conventional/I.S. typebricks in cement mortar 1:4 in half brick thick wall including mild steel longitudinal reinforcement of 2 bars of 6 mm diameter / 2 hoop iron strips 25 mm X 1.6 mm placedat every third course, properly bent and bonded at ends scaffolding, racking out joints and watering etc. complete.SSR Pg No./It No. 197/27.06 |
| 7 | Providing and laying Cast in situ / Ready Mix cement concrete M-20 of trap / granite / quartzite / gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks, laying / pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete, (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer / concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)SSR Pg No./It No. 182/25.70 |
| 8 | Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C.pilecaps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis,copings, fins, arches etc. as perdetaileddesigns,drawingsand schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete.SSR Pg No./It No. 188/26.33 |
| 9 | Providing internal cement plaster 12mm thick in single coat in cement mortar 1:5 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete.SSR Pg No./It No. 209/32.03 |
| 10 | Providing internal cement plaster 20mm thick in Single coats in cement mortar 1:5 without neeru finish, to concrete, brick surface in all positions including scaffolding and curing etc. complete.SSR Pg No./It No. 209/32.06 |
| 11 | Providing and fixing frame with / without ventilator of size as specified with Country non teak wood for doors and windows including chamfering, rounding, rebating, iron holdfast of size 300mm x 40mm x 5mm with oil painting, etc. complete.SSR Pg No./It No. 222/39.02 |
| 12 | Providing and fixing solid core flush door shutter commercial in single leaf 32 mm thick without ventilator commercial type of exterior grade as per detaileddrawings withwrought iron hold fast, stainless steel fixtures and fastenings and handles on both sides and finishing with oil painting 3 coats complete.SSR P.No./It.No. 197/39.10 |
| 13 | Providing and laying vitrified matt fininsh tiles having size 590 mm to 605 mm x to 605 mm of 8 to 10 mm thickness and confirming IS. 15622-2006 (Group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of1:4 cement morar including neat cement float, filling joints, curing and cleaning etc. complete.SSR Pg No./It No. 218/33.42 |
| 14 | Providing and fixing Orissa type white glazed earthenware 575 mm water closet pan including S trap with earthenware foot rests, cast iron soil and vent pipe upto outside face of the wall 1:2:4 brick bat lime concrete bedding without flushing tank and its accessories etc. complete.SSR Pg No./It No. 297/42.30 |
| 15 | Providing and laying matt finish ceramic tiles of having size 30 cm x 30 cm confirming to I.S.15622 / 2006 (group D II-A) and 7 to 8 mm thick for flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with white/colour cement slurry cleaning curing etc. complete.SSR Pg No./It No. 215/33.24 |
| 16 | Providing and laying ceramic tiles ofhaving size 30 cm x 30 cm and confirming to corresponding I.S. for dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white / colour cement slurry cleaning curing etc. complete.SSR Pg No./It No. 215/33.25 |
| 17 | Providing and fixing mild steel grill gate with angle iron frame 65mm x 65mm x 10mm with iron bars at 150mm C/C and diagonal flats as per the detailed drawing including hinges, pivot block locking arrangement, welding riveting and oil painting of three coats of approved shade Weight of gate 35 Kilogram/Smt.SSR P.No./It.No. 204/44.10 |
| 18 | Providing and fixing Road junction / Information sign board of size 0.90 m x 0.60 m. prepared on 18 gaugeM.S. sheet with horizontal bracing of angle iron frame of size 25 x 25 x 5mm including painting with one coat of zinc cromate stoving primer and two coats of oil painting including two angle iron post of size 50 x 50 x 5 mm of 2.40 m. long includingalltaxes, conveying, fixing in ground with cement concrete 1:4:8 block of 30 cm x 30 cm x 30 cm size as directed by Engineer-in-charge etc. complete. Mild Steel Board with Engineering Grade.As Per RA |
| 19 | Royalty Charges (Sand) |
| 20 | Royalty Charges (Other Minerals) |
| 21 | Test of C. C. Cube - Compressive Strength of C.C. Cube M-10 (Set of 3 cubes) |
| 22 | Test of Brick - Water Absorption (Set of 5 Bricks), CompressiveStrength (Set of 5 Bricks), Efflorescence (Set of 5 Bricks) |
| 23 | Test of Vitrified Tiles - Water Absorption, Modulus of Rupture (Set of 6 Tiles) |
| 24 | Add 18% G.S.T. Charges |
| 25 | Supplying and erecting PVC trunking (PVC casing-n-capping) of size 25 mm with accessories on wall / ceiling as per specification No: WG-MA/CON.(1-2-7) |
| 26 | Supplying and erecting mains with 2x1.5 sq.mm FRLSH copperPVC insulated wire laid in provided conduit / trunking / inside pole / Bus bars or any other places as per specification No: WG-MA/BW (1-3-1) |
| 27 | Supplying and erecting mains with 1x1.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit / trunking / inside pole / Bus bars or any other places as per specification No: WG-MA/BW (1-3-1) |
| 28 | Supplying and erecting mains with 2x2.5 sq.mm FRLSH copperPVC insulated wire laid in provided conduit / trunking / inside pole / Bus bars or any other places as per specification No: WG-MA/BW (1-3-2) |
| 29 | Supplying and erecting mains with 1x2.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit / trunking / inside pole / Bus bars or any other places as per specification No: WG-MA/BW (1-3-2) |
| 30 | Supplying and erecting mains with 2x4 sq.mm FRLSH copper PVC insulated wire laid in provided conduit / trunking / inside pole / Bus bars or any other places as per specification No: WG-MA/BW(1-3-3) |
| 31 | Supplying and erecting mains with 1x4 sq.mm FRLSH copper PVC insulated wire laid in provided conduit / trunking / inside pole / Bus bars or any other places. as per specification No: WG-MA/BW(1-3-3) |
| 32 | Supplying and erecting modular type switch 6A / 10A ISI mark approved make duly erected on provided plate and box with wiring connections complete.(1-6-1)) |
| 33 | Supplying and erecting modular type 3 pin 6A multi socket with safety shutter ISI mark approved make duly erected on provided plate and box with wiring connections complete.(1-6-10) |
| 34 | Supplying and erecting PVC Surface modular switch box with double mounting plate for 12 module duly erected in an approved manner.(1-6-32) |
| 35 | Supplying and erecting modular type 3 pin 6 / 16A multi socket with safety shutter ISI mark approved make duly erected on provided plate and box with wiring connections Complete(1-6-11)] |
| 36 | Supplying and erecting modular type switch 16A ISI mark approved make duly erected on provided plate and box withwiring connections complete.(1-6-2) |
| 37 | Supplying and erecting PVC Surface modular switch box with double mounting plate for 3 module duly erected in an approved manner.(1-6-28) |
| 38 | Wiring for plug on board with Switch socket surface / concealed type, copper wiring and earthing and with modular accessories as per specification No: WG-PW/CW(1-7- 26) |
| 39 | Point wiring for light / bell / exhaust fan in PVC trunking (casing-capping) with 1.5 sq.mm (2+1E) FRLSH grade copper wire, modular type switch, earthing and required accessories as per specification No: WG-PW/SW(1-7-19) |
| 40 | Point wiring for ceiling fan in PVC trunking (casing-capping) with 1.5 sq.mm (2+1E) FRLSH grade copper wire, modular type switch, earthingand required accessories as per specification No: WG-PW/SW(1-7-20) Fan Point |
| 41 | Supplying & erecting ready to use retrofit T8 LED 18-20W tube light with heat sink, integrated HF electronic driver complete & compatible to T8 (36W) / T12 (40W) luminaire by disconnecting starter & ballast if necessary.(2-8-14) |
| 42 | Supplying and erecting luminous / modular type call bell indicator with plastic body, heavy duty coil and indicatorlamp working on 230V A.C. supplywith resetting arrangement complete erectedondouble wooden/ sunmica board.(2-3-14) |
| 43 | Supplying & erecting3W, 230V integral type LED Lampsuitable for B-22/E-27 base.(2-8-9) |
| 44 | Supplying & erecting 5W-8W, 230V integral type LED Lamp suitable for B-22/E-27 base.(2-8-10) |
| 45 | Supplying and erecting Five Star Rated Energy Saving Ceiling Fan 230 V A.C. 50 cycles 1200 mm complete erected in position as per specification no. FG-FN/CF(2-10-21) |
| 46 | Supplying & fixing Anchor type fastener Fan hook, with 2 Nos of 10 mm dia x 75 mm long with necessary materials for Ceiling Fan.(2-11-2) |
| 47 | Supplying and erecting modular type electronic step regulator for fan two module ISI mark approved make duly erected on provided plate and box with wiring connections complete.(1-6-23) |
| 48 | Supplying and erecting ISI mark midget type 3.0 Ltr instant type water heater of ABS plastic body 3 kW,heating element 230/250 Volts 50 cycle AC supply with inlet and outlet, thermostatic control and thermal cutoff with 3 core PVC flexible wire leads complete duly tested and marking sr. no. and date of erection.(3-1-6) |
| 49 | Supplying and erecting chromium plated heavy duty brass stop cock for inlet pipe of water heater (15 mm. dia).(3-1-7) |
| 50 | Providing fibre reinforced pvc flexible pipe upto 1m length with brass locking nuts and washers and clips at both ends suitable for hot water and cold water both (1set of 2 nos) complete. (3-1-11) |
| 51 | Supplying, installing, testing and commissioning of 1400 VA to 1600 VA Digital pure sine waveinverter based on Insulated Gate Bipolar Transistor (IGBT) technology single phase 230V,50 Hz completeas per specification no.AP-INV (Without batteries)(3-6-3) |
| 52 | Supplying and erecting 12 V/150 Ah tubular battery with battery terminal wire, duly charged complete with 36 months warranty complete(3-8-4) |
| 53 | Supplying and erecting ultra violet water purifier with softener for safe drinking water consisting of UV germicidal tube of 8W capacity, choke made of copper wire, two indicator lamps, dual function cartridge with output of purified water 1 litre/min with activated carbon filter and softener operating on 230V, single phase A.C. supply with UV fail & filter change indication system.(3-5-2) |
| 54 | Supplying, erecting, testing and commissioning self contained water cooler 230/250V 50Hz nominal cooling capacity of 20 litres per hour and storage capacity 20 litres with partially stainless steel body As per specification No. APWCR/ WC(3-3-7) |
| 55 | Supplying, erecting & marking DPMCB 6 A to 32 A B- series (for lighting) in provided distribution board as per specification No. SW-SWR/MCB(5-3-7) |
| 56 | Supplying, erecting & marking SPMCB 6A to 32A, C-series (for motor/power) in provided distribution board as per specification No. SW-SWR/MCB(5-3-2) |
| 57 | Supplying, erecting & marking SPMCB 6A to 32A, B- series (for lighting) in provided distribution board as per specification No. SW-SWR/MCB(5-3-3) |
| 58 | Supplyingand erecting single pole and neutral distributionboard (SPNDB), with 2 ways for incoming and 6 ways (6 poles) for outgoing SP MCBs, with door, 1.2mm thickness surface / flush mounted, IP 43 Protection on iron / GI frame as per specification No. SW-SWR/MCBDB(5-4-8) |
| 59 | Providing earthing with galvanized iron earth plate size 60 x 60 x 0.6 cm complete with all materials, testing & recording the results asper specification No. EA-EP (9-1-1) |
| 60 | Supplying and erecting integrated LED street light fitting26 to 30W IP65 & IK08 class having single piece pressure die-cast aluminium housing ,having system lumens output of Min. 2600 Lumens, min. efficacy of 100 lumen/W, CRI>70, CCT upto 6500K, THD<10%, p.f. >0.95, operating range of140-270V, inbuilt surge protection of 10 kV, Life class of 50,000 Hrs. at L70B50,including driver complete with 3 Years warranty as per specification NoFG-ODF/FLS2.(2-4-3) |
| 61 | Supplying and erecting street light Wall bracket made from 25 mm. dia ‘ G.I. pipe 1.2 m. in total length complete as per specification No. FG-BKT/WB(2-7-3) |
| 62 | Supplying and erecting mains with WP 2 x 6 sq. mm. 1100 V. grade aluminium PVCinsulatedandPVC sheathed wires on G.I. bearer wire No. 8 SWG complete erectedwith required size ofporcelainreelinsulators and 16 SWG G.I. binding wire(1-4-3). |
| 63 | MSEDCL Charges |
| 64 | Add 18% G.S.T. Charges |
