|
| 1 | REPAIR WORK OF STEEL BOAT NO S-48 |
| 2 | Hauling up of Steel Boats having 30 to 50 ton capacity. Including all consumables as specified by the department. Including all labour, tools and tackles. Work to be completed to the level of satisfaction of the department. |
| 3 | Launching of Steel Boats having 30 to 50 ton capacity. Including all consumables as specified by the department. Including all labour, tools and tackles. Work to be completed to the level of satisfaction of the department. |
| 4 | Dock rent, positioning equipments charges. Including all consumables/equipments as specified by the department. Including all labour, tools and tackles. Work to be completed to the level of satisfaction of the department. |
| 5 | Oyster cleaning and preparing the boat surface for UT gauging.Including all consumables as specified by the department. Including all labour, tools and tackles. Work to be completed to the level of satisfaction of the department. |
| 6 | Rudder with shaft removing and refitting with new packing. Including all consumables as specified by the department. Including all labour, tools and tackles. Work to be completed to the level of satisfaction of the department. |
| 7 | Rudder plate removing and refitting with new SS bolt and nut. Including all consumables as specified by the department. Including all labour, tools and tackles. Work to be completed to the level of satisfaction of the department. |
| 8 | Propeller with shaft removing and refitting with new gland packing. Including all consumables as specified by the department. Including all labour, tools and tackles. Work to be completed to the level of satisfaction of the department. |
| 9 | Propeller shaft welding with SS welding rod at two bush portion, bend checking, cutting and suiting propeller. Including all consumables as specified by the department. Including all labour, tools and tackles. Work to be completed to the level of satisfaction of the department. |
| 10 | Propeller Balancing. Including all consumables as specified by the department. Including all labour, tools and tackles. Work to be completed to the level of satisfaction of the department. |
| 11 | Scrapping and cleaning old painted surface with emery paper, wire brushes etc. Including all consumables as specified by the department. Including all labour, tools and tackles. Work to be completed to the level of satisfaction of the department. |
| 12 | Painting primer coat with zinc rich primer over cleaned old surface (Asian paints or equivalent brand approved by department). Including all consumables as specified by the department. Including all labour, tools and tackles. Work to be completed to the level of satisfaction of the department as per approved design. |
| 13 | Painting with synthetic enamel paint using approved quality enamel paint one coat (Asian paints or equivalent brand approved by department). Including all consumables as specified by the department. Including all labour, tools and tackles. Work to be completed to the level of satisfaction of the department as per approved design. |
| 14 | Above each additional coat using approved quality enamel paint (Asian paints or equivalent brand approved by department). Including all consumables as specified by the department. Including all labour, tools and tackles. Work to be completed to the level of satisfaction of the department as per approved design. |
| 15 | Cutting the damaged portion of old rusted skin plate by chipping and pre heating using gas flame and removing rust by hammering and thin cutting and removing plate. Including all consumables as specified by the department. Including all labour, tools and tackles. Work to be completed to the level of satisfaction of the department. |
| 16 | Fabrication works using MS plate angle etc (Marine Quality, IS 2062 Grade B) including cutting, leveling, straightening, grooving joining and finishing. Including all consumables as specified by the department. Including all labour, tools and tackles. Work to be completed to the level of satisfaction of the department.The rate is applicable to all works involving MS Sheet/MS Flat/ or MS material if not specifically mentioned in the schedule of rates. MS Plate (IS2062 Gr B) and MS Angle iron, MS Flat will be provided by Department from Ayitti Office, Trikaripur |
| 17 | Painting with epoxy primer one coat (Asian paints or equivalent brand approved by department). Including surface preparation. Including all consumables as specified by the department. Including all labour, tools and tackles. Work to be completed to the level of satisfaction of the department as per approved design. |
| 18 | Painting with epoxy coal tar or epoxy paint approved quality for each coat over a primer coat already done (Asian paints or equivalent brand approved by department). Including all consumables as specified by the department. Including all labour, tools and tackles. Work to be completed to the level of satisfaction of the department as per approved design. |
| 19 | Supplying and changing cutless bush after machining and suiting with SS bolts. Including all consumables as specified by the department. Including all labour, tools and tackles. Work to be completed to the level of satisfaction of the department. |
| 20 | Sea chest cleaning and repairing and refixing with SS bolts. Including all consumables as specified by the department. Including all labour, tools and tackles. Work to be completed to the level of satisfaction of the department. |
| 21 | Cutting damaged portion of old sheet and new 16 SWG GI Sheet cutting, shaping and fixing by welding. Including all consumables as specified by the department. Including all labour, tools and tackles. Work to be completed to the level of satisfaction of the department. |
| 22 | Bollard fabricating and fitting by welding with 3\" dia or suitable GI pipe and plates of suitable thickness as specified by the department. Including all consumables as specified by the department. Including all labour, tools and tackles. Work to be completed to the level of satisfaction of the department. |
| 23 | Replacement of acrylic sheet of 5mm thickness and 25mm Aluminium beedings including all consumables as specified by the department including all labour, tools and tackles. Work to be completed to the level of satisfaction of the department. |
| 24 | Scupper pipe replacing work with suitable size 1.5\" GI pipe C Class. Including all consumables as specified by the department. Including all labour, tools and tackles. Work to be completed to the level of satisfaction of the department. |
| 25 | Boat number, KIV number, Departmental information and other informative details writing on the Cabin and Superstructure (painting related wotks). Including all consumables as specified by the department. Including all labour, tools and tackles. Work to be completed to the level of satisfaction of the department. |
| 26 | Sealing and wooden seat varnishing work. Including all consumables as specified by the department. Including all labour, tools and tackles. Work to be completed to the level of satisfaction of the department. |
