Tender For Annual Operation And Maintenance Of Existing Infrastructure Comprising Of Electromechanical Equipments Internal External Electrical System In Jksidco Managed Industrial Complexes Of Jammu Division, jammu-Jammu And Kashmir

Tender For Annual Operation And Maintenance Of Existing Infrastructure Comprising Of Electromechanical Equipments Internal External Electrical System In Jksidco Managed Industrial Complexes Of Jammu Division-- 1 Complete rewinding of following submersible Motors including rebate of old material. 2 5 HP Capacity 3 7.5 HP Capacity 4 10 HP Capacity 5 12.5HP Capacity 6 15 HP Capacity 7 17.5 HP Capacity 8 20 HP Capacity 9 22.5 HP Capacity 10 25 HP Capacity 11 Complete rewinding of horizontal Squirrel Cage Motors High Speedtype including rebate of old material 12 5 HP Capacity 13 7.5 HP Capacity 14 10 HP Capacity 15 Repair to 5/7.5HP/10HP capacity motor by way of replacement of bearing at DE and NDE and assembling of motor. 16 Repair to 5/7.5HP/10HP capacity motor by way of welding, turning, polishingof shaft , sleeve to end covers and assembling of motor etc. 17 Disconnecting the electrical connection, disengaging the pump motor set from base frame , making alignment, all electrical connection and testing therof. 18 Loading of motor pump set into mechanical transport and carriage to workshop and unloading thereof. Loading the motor pump set into mechanical transport and carriage to site and unloading thereof by using skilled/unskilled labour and other tools and tackles 19 Up to 10 Km 20 Above 10Km upto 15Km 21 Loading of damaged Submersible Motor (V4) from site of work by way of head load carriage to Mechanical Transport and carriage back to site of work after repairing and unloading at site up to 10KM 22 Loading of damaged Submersible Motor (V6) from site of work by way of head load carriage to Mechanical Transport and carriage back to site of work after repairing and unloading at site up to 10KM 23 Submersible Pump V4 to V8 24 Disconnecting of power supply and testingof pump at site 25 Dismantling of submersible pump set at workshop and checking for its replacement of damaged parts. 26 Providing and fitting of new pump shaft 27 Reconditioning of pump shaft by way of welding, turning and polishing to actual size, making of key way 28 Providing and fitting of new cast iron impeller. 29 Reconditioning of impeller by way of welding, turning and polishing to the actual size. 30 Providing and fitting of new Neck Ring. 31 Providing and fitting of Shaft Sleeve. 32 Providing and fitting of Coupling with key 33 Providing and fitting of Bowl Bush 34 Providing and fitting of NRV Bowl. 35 Providing and fitting of Tee Bolts/per piece 36 Providing and fitting of Stud fasting ring with studs upper and lower and circlip lock. 37 Providing and fitting of Diffuser. 38 Providing and fitting of thrust bearing / thrust pad set 39 Assembling of Pump and then coupling with motor with proper alignment. Testing in test pit at workshop. 40 Providing and fitting of copper submersible cable 3 core along with thimbles 41 2.5 Sqmm 42 4Sqmm 43 6Sqmm 44 10Sqmm 45 16Sqmm 46 Extraction out of Submersible Motor pump set 47 Extraction out2.5 inch dia to 4 inch dia column pipes from tube by way of Disconnecting of Power connections from starter panel, disengaging from delivery bend and extracting out Submersible Pump Set complete along with column pipes by hoisting chain pulley block at Tube well, stacking of column pipes and Submersible cable properly. 48 Column pipes 0 to 10 Nos 49 Column pipes 10 to 20 Nos 50 Loweringof Submersible Motor pump set 51 Lowering of2.5 inch dia to 4 inch dia column pipes in Tube well byMaking of cable connection of motor with Submersible cable after dressing cable ends properly. Making of each joint water proof. Lowering of Submersible Pump Set complete along with column pipes and submersible cable with providing & fitting of jointing material and nuts and bolts. Making of connections to the starter panel 52 Column pipes 0 to 10 Nos 53 Column pipes 10 to 20 Nos 54 Star Delta control panels for Submersible pump set 55 Disconnection ofincomingPowerconnectionfrommainswitch /MCCB/Voltage Stabilizer and checking of fault. Making of temporary arrangement for running of pumpingmachinery 56 Providing and fittingof Damaged Contactor of following ratings 57 MNX 25 Amp 58 MNX 45 Amp 59 MNX 50 Amp 60 MNX 70 Amp 61 MNX 95 Amp 62 MNX 110 Amp 63 Providing and fittingof Damaged Kit of following rating contactors 64 MNX 25 Amp. 65 MNX 45 Amp. 66 MNX 50 Amp. 67 MNX 70 Amp. 68 MNX 95 Amp. 69 MNX 110 Amp. 70 Providing and fittingof Damaged coil of following rating contactors 71 MNX 25 Amp. 72 MNX 45 Amp. 73 MNX 50 Amp. 74 MNX 70 Amp. 75 MNX 95 Amp. 76 MNX 110 Amp. 77 Providing & Fitting of Auxiliary block 78 Providing & Fitting of Aluminum Bus Bar 79 Providing & Fitting of damaged over load relay & P/F new overload Relay 80 Providing & Fitting of damagedundervolt relay&P/Fnew relay 81 Providing & Fitting of single phase preventer ( L&T) 82 Providing & Fittingof DamagedMCCB 83 63 Amp 4pole 16KA 84 100 Amp 4pole 16KA 85 160Amp 4pole 16KA 86 200 Amp 4pole 36KA 87 250 Amp 4pole 36KA 88 400 Amp 4pole 50KA 89 630 Amp 4pole 50KA 90 Making of incomingPowerconnectiontomainswitch/MCCB/Servo Stabilizer and checking on full load at site 91 Control Star delta panel up 15 to 100 Amp. 92 Chargesforminorrepair/servicingofLTControlPanel including minorparts like meters, indicators , timers etc 93 Providing /fitting of circuit wiring 94 Providing /fitting of voltmeter Analog 95 Providing /fitting of amp meter Analog 96 Providing /fitting of Amp selector switch 97 Providing/ Fitting ofdigital Volt meter 98 Providing / Fitting of digital Amper meterCT operated 99 Providing /fitting of volt selector switch 100 Providing /fitting of Push Button on/off 101 Providing /fitting of indicator lamps R/4/B 102 Providing /fitting of star delta timer 103 Providing /fitting of terminal plate 104 Providing /fitting of quartz timer 105 Providing /fitting of delay timerProviding /fitting of delay timer 106 Providing /fitting of power wiring 107 Providing /fitting of thermal overload relay 108 Providing /fitting of bus bar 109 Providing /fitting of fuse link 110 Providing /fitting of fuse holder suitable for bolted fuse link 111 Servo Stabilizer 25 to 50 KVA Capacity 112 Rewinding of copper Coil & fitting etc at site. 113 Providing & Fitting of Dimmer coil 60Amp. 114 Providing & Fitting of Change Over Switch 100 ampere 115 Providing & Fitting of Change Over Switch 100 ampere 116 Providing & Fitting of digital Control card 117 Providing & Fitting of carbon brushes 118 Providing & Fitting of moving arm 119 Providing & Fitting of RC circuit 120 Providing & Fitting of toggle switch for auto /manual 121 Providing & Fitting of CT 100/5A 122 Providing & Fitting of limit switch 123 Providing & Fitting of gear wheel 124 Providing & Fitting of Indicator 125 Providing & Fitting of Selector Switch 126 Providing & Fitting of Ampere meter 127 Providing & Fitting of Voltmeter 128 Fresh Transformer Oil per litre 129 Providing & Fitting of Nut Bolts 130 Complete power wiringwith thimbling 131 Complete top panel wiringwith thimbling 132 Disconnecting of power connection of the servo Stabilizer, dismantling of stabilizer by unscrewing nut bolts. Extracting out of stabilizer coil structure by mounting of chain pulley block with the help of manual skilled labour. 133 Distribution Transformers 134 63KVA Capacity Transformer 135 Disconnecting of distribution transformer HT links and HT/ LT side cables. Dismounting from poles/platform using crane / skilled and un-skilled labour using tools and tackles, loading in Mechanical transport and carriage to workshop and unloading at workshop. Providing and installing transformer from its own temporarily to run the station till the damaged transformer is repaired and installed where standby not available 136 Draining of Transformer oil in barrels, dismantling of top cover and extracting out assembly using chain pulley block and tripod and checking for fault. 137 Reconditioning of LV Aluminium coilper kg 138 Providing and fitting of HV leg coil Aluminium SE (per Kg) 139 Providing and fitting of HV leg coil Aluminium DPC(per Kg) 140 Providing and fitting of LV leg coil Aluminium DPC (per Kg) 141 Providing & fitting of HV bushing 142 Providing& fitting of LV bushing 143 Providing& fitting of HV bush rod (metal part)per rod 144 Providing& fitting of LV bush rod (metal part) per rod 145 Providing& fitting of gasket set 146 Providing& fitting of tapping switch with handle 147 Providing & fitting of LT terminal plate 148 Providing & fitting of Oil drain valve 149 Providing & fitting of core laminations per Kg 150 Providing& fitting of sundry items 151 Heat treatment of repaired transformer 152 Arresting of oil leakages if any by way of welding etc. 153 Painting of transformer body 154 Silica Gel breather 155 Providing & Fitting of fresh T-oil 156 Assembling of transformer and lowering into the tank using chain pulley block and tripod. Assembling of top cover thereof and filling of transformer oil after dehydrating. 157 Loading of transformer into Mechanical transport using crane / skilled and un-skilled labour using tools and tackles and carriage to the site of work (For Urban areas). Mounting the transformer on poles/ platform with the help of crane / skilled and un-skilled labour using tools and tackles after dismounting the temporarily installed transformer 158 100KVA Capacity Transformer 159 Disconnecting of distribution transformer HT links and HT/ LT side cables. Dismounting from poles/platform using crane / skilled and un-skilled labour using tools and tackles, loading in Mechanical transport and carriage to workshop and unloading at workshop. Providing and installing transformer from its own temporarily to run the station till the damaged transformer is repaired and installed where standby not available 160 Draining of Transformer oil in barrels, dismantling of top cover and extracting out assembly using chain pulley block and tripod and checking for fault. 161 Reconditioning of LV Aluminum coilper kg 162 Providing and fitting of HV leg coil Aluminium SE (per Kg) 163 Providing and fitting of HV leg coil Aluminium DPC(per Kg) 164 Providing and fitting of LV leg coil Aluminium DPC (per Kg) 165 Providing & fitting of HV bushing 166 Providing& fitting of LV bushing 167 Providing& fitting of HV bush rod (metal part)per rod 168 Providing& fitting of LV bush rod (metal part) per rod 169 Providing& fitting of gasket set 170 Providing& fitting of tapping switch with handle 171 Providing & fitting of LT terminal plate 172 Providing & fitting of Oil drain valve 173 Providing & fitting of core laminations per Kg 174 Providing& fitting of sundry items 175 Heat treatment of repaired transformer 176 Arresting of oil leakages if any by way of welding etc. 177 Painting of transformer body 178 Silica Gel breather 179 Providing & Fitting of fresh T-oil 180 Assembling of transformer and lowering into the tank using chain pulley block and tripod. Assembling of top cover thereof and filling of transformer oil after dehydrating. 181 Loading of transformer into Mechanical transport using crane / skilled and un-skilled labour using tools and tackles and carriage to the site of work (For Urban areas). Mounting the transformer on poles/ platform with the help of crane / skilled and un-skilled labour using tools and tackles after dismounting the temporarily installed transformer 182 250KVA Capacity Transformer 183 Disconnecting of distribution transformer HT links and HT/ LT side cables. Dismounting from poles/platform using crane / skilled and un-skilled labour using tools and tackles, loading in Mechanical transport and carriage to workshop and unloading at workshop. Providing and installing transformer from its own temporarily to run the station till the damaged transformer is repaired and installed where standby not available 184 Draining of Transformer oil in barrels, dismantling of top cover and extracting out assembly using chain pulley block and tripod and checking for fault. 185 Reconditioning of LV Aluminum coilper kg 186 Providing and fitting of HV leg coil Aluminium SE (per Kg) 187 Providing and fitting of HV leg coil Aluminium DPC(per Kg) 188 Providing and fitting of LV leg coil Aluminium DPC (per Kg) 189 Providing & fitting of HV bushing 190 Providing& fitting of LV bushing 191 Providing& fitting of HV bush rod (metal part)per rod 192 Providing& fitting of LV bush rod (metal part) per rod 193 Providing& fitting of gasket set 194 Providing& fitting of tapping switch with handle 195 Providing & fitting of LT terminal plate 196 Providing & fitting of Oil drain valve 197 Providing & fitting of core laminations per Kg 198 Providing& fitting of sundry items 199 Heat treatment of repaired transformer 200 Arresting of oil leakages if any by way of welding etc. 201 Painting of transformer body 202 Silica Gel breather 203 Assembling of transformer and lowering into the tank using chain pulley block and tripod. Assembling of top cover thereof and filling of transformer oil after dehydrating. 204 Loading of transformer into Mechanical transport using crane / skilled and un-skilled labour using tools and tackles and carriage to the site of work (For Urban areas). Mounting the transformer on poles/ platform with the help of crane / skilled and un-skilled labour using tools and tackles after dismounting the temporarily installed transformer 205 Making of LT side cable connections as well as HT side cable connections and charging the transformer on no load conditions and thereafter checking on full load conditions. 206 Providing and filling of transformer oil for topping (per litre) 207 Providing & fitting of Lighting arrestor station type 208 Providing & fitting of Lighting disc insulator with accessory polymer type 209 Providing & fitting of Lighting pininsulator with pin polymer type 210 Providing & fitting of Lighting AB switch 400Amp with handle operated. 211 Providing & fitting of Lighting AB switch 200Amp with handle operated. 212 Providing & fitting of horn gap DO switch 213 Providing & fitting of Prodigy meter 214 Providing & fitting of chemical earthing 215 Providing & Fixing of Aluminum unarmored cable 1x120 Sq.mm 216 Providing & Fixing of Aluminum narmoured cable 1x185 Sq.mm 217 Road lighting network 218 Providing & fitting with LED fitting 60/65 Watt along with allied Nipple for fixing of LED Fitting with wiremesh protection etc. 219 Providing and fitting of MCB/ SPN installed for controlling of Road lighting Network of following 220 SPN 32Amp 221 TPN MCB 32Amp. 222 Supply and fixing of dust and weather proof gasketted 250mm x 250mm x 200 mm deep cable looping box (nominal) size made out of 18 SWG fitted with pole with the help of 2 Nos. MS clamp (25x3mm) thick flat strip of suitable size with nuts and bolts. Complete with hinged cover locking L-Key/Nut Bolts type, earth studs suitable for poles mounted including supply and fixing of 6A MCB SP, MCB carrier and 4-way 63A terminal block fixed on suitable size and suitable for receiving PVC armoured cable complete with connections and painting etc. 223 Providing and fittingof connection strip 63Amp 4pole heavy duty 224 Providing & Fixing of prodigy meter 225 Providing and fitting of SP MCB 6Amp. in existing connection box 226 Repairingof existing 150/160 Watt LED light 227 Providing and fitting of connection wire 2x1.5 sq mm in steel tubular pole. 228 Fabrication, Supplying and fixing of 40mm dia MS pipe (Medium Class) bracket for mounting LED Street light fitting on pole at appropriate place including bending to required shape at 105 degree, 2 nos 40 mm x 3 mm flat iron clamps with nuts, bolts and washer, painting to clamps with primer and finish paint etc as required complete Job. 229 Providing and fitting of contractor MNX 9Amp. For timer 230 Providing and fitting Solar/Quartz timer 231 Cables of following sizes 232 Providing & laying of Aluminum armored in ground 2.5feet below the ground level along with HDPC pipe 40mm Dia of Following sizes:- 233 2x10 Sq.mm 234 4x10Sqmm 235 4x16Sqmm 236 4x25 Sqmm 237 4x35 Sqmm 238 3.5x50Sqmm 239 Internal Electrification 240 Providing & fixing fall ceiling light 6/7 watt 241 Providing & fixing fall ceiling light 9/10 watt 242 Providing & fixing fall ceiling light 12 watt 243 Providing & fixing LED tube light complete fitting 20 watt 244 Providing & fixing LED bulb 9 watt 245 Providing & fixingmodular switch 5/6Amp 246 Providing & fixingmodular switch 15/16Amp 247 Providing & fixingmodular socket 5/6Amp 248 Providing & fixing modular socket 15/16Amp 249 Providing & fixingmodular bell push 250 Providing & fixingFan dimmer 251 Providing & fixing modular plate 2 module 252 Providing & fixing modular plate 3 module 253 Providing & fixingmodular plate4module 254 Providing & fixingmodular plate 6 module 255 Providing & fixingmodular plate 12 module 256 Providing & fixingSPN 32 amp in existing DB 257 Providing & fixingSP 6 to 32 amp in existing DB 258 Providing & fixingTPN 32 amp in existing DB 259 Providing & fixingmodular plate 6 module 260 Providing & fixingof following size single core copper wire in existing conduit. 261 1x1.5 sqmm 262 1x2.5 sqmm 263 1x4 sqmm 264 1x6 sqmm 265 Providing & fixingCeiling fan 1200mmbase model 266 Providing & fixingexhaust fan 300mm 267 Providing & fixingInverter 1000VA 268 Providing & fixingInverter 2000VA 269 Invertor Battery 160 AH 270 Servicing of window/spilt AC 271 Water distribution system 272 Providing & laying of GI pipe, complete with fitting in ground including trench & refilling the same. 273 40mm Dia 274 50mm Dia 275 65mm Dia 276 80mm Dia 277 100mm Dia 278 Providing & laying of GI Elbow of following sizes:- 279 40mm Dia 280 50mm Dia 281 65mm Dia 282 80mm Dia 283 Providing & laying of GI Socket of following sizes:- 284 40mm Dia 285 50mm Dia 286 65mm Dia 287 100mm Dia 288 Providing & fixing of MS flange of following sizes:- 289 2 inch 290 2.5 inch 291 3 inch 292 4 inch 293 5 inch 294 Providing & fixing Sluice Valvecast Iron (Heavy Duty) 295 50mmǾ 296 65mmǾ 297 80mmǾ 298 100mmǾ 299 125mmǾ 300 150mmǾ 301 Providing & fixing NRV cast Iron (Heavy Duty) 302 50mmǾ 303 65mmǾ 304 80mmǾ 305 100mmǾ 306 125mmǾ 307 150mmǾ 308 Repairing of cast Iron valve with finishing and polishing 309 50mmǾ 310 65mmǾ 311 80mmǾ 312 100mmǾ 313 125mmǾ 314 150mmǾ 315 Jointing of MS/GI pipe 50mmdia to make leak proof 316 50mmǾ 317 65mmǾ 318 80mmǾ 319 100mmǾ 320 125mmǾ 321 150mmǾ 322 Providing and fittingof short bend of following sizes 323 80mmǾ 324 100mm 325 150mm 326 Providing and fittingof Long bend of following sizes 327 80mm 328 100mm 329 150mm 330 Providing and fittingPuncher Roll to make leak proof connection 331 Adhesive Tape

Sr No	CorrigendumDate	Corrigendum	CorrigendumType	NewSubmissionDate
1	27-08-2024	corrigendum	Date	31-08-2024

INR 1500 /-

INR 50000.0 /-

Refer document