|
| 1 | Earth work in excavation : Labour only for earth work in excavation in foundation, in foundation trenches, not exceeding 1.5 m wide and not exceeding 1.5 min depth getting out in hard or dense soil as ordered by EIC/SIC. |
| 2 | P.C.C. (1:2:4) : M & L for providing plain cement concrete type-B1, 1:2:4 mix ( using 12.5 mm graded stone aggregate ) as in sub-base, filling and mass concrete, topping of floor etc. as ordered by EIC/SIC. |
| 3 | Brick work (1:6): M & L for brick work with old size sub class\"B\" bricks, straight or curved on plan exc 6m mean radius with (1: 6) cement morter as ordered by EIC/SIC. |
| 4 | Half Brick work: M & L for half brick thickbrick work with old size Sub class\"B\" bricks,, straight or curved on plan with (1: 4) cement mortar as ordered by EIC/SIC. |
| 5 | Cutting holes:Labour only for Cutting holes exc. 150 sq.cm and not exceeding 400 sq. cm into or through brick walls built in cement mortar and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-l as require and ordered by EIC/SIC. |
| 6 | MSPlate: S & F ofmild steel plate of Fe-410-W(Gde- E-250) quality B, (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes,including fabrication and erection for valve chamber plate or similar works or foundation plate etc. complete as ordered by EIC/SIC. |
| 7 | MSwork: M & Lfor providing rolled mild steel angle, tee, flat, chanel, grill etc. of Fe-410- W(Gde-E-250)quality-B, sections, erection, fabrication & fixed independently at any position as ordered by EIC/SIC. |
| 8 | M.S small articles : S & F for providing mild steel straps, clamps, hold fasts, capsule hinges etc, as small articles,to be fixed in position as required as ordered by EIC/SIC. |
| 9 | Surface Painting:M & L for Wire brushing and cleaning top surface of existing tarfelting surface, ms gutter etc., including flashings and junction of parapets, etc., and surface painting,with a layer of blown grade bitumen of any penetration applied hot @ 1.7 kg per sq. m, to arrest any hole (for tarfelting surface) etc. complete as ordered. |
| 10 | Taking down plastering : Labour only for taking down cement or cement lime plaster of any description at required height, flush pointing, any painting etc. from brick wall including raking out joints, hacking for key, scrubbing down with water etc. complete as ordered by EIC/SIC. |
| 11 | Bedding layer (1:6) :M & L for rendering average 20 mm thick cement plaster 1:6in screed bed under bituminous surface and using extra cement slurry@ 3.0 kg / sqm. on roughening surfaces before screed bed of any description as ordered by EIC/SIC. |
| 12 | Cement plaster(1:6): M & L for providing 12 mm thick cement plaster 1:6 mix on fair faces of brick work or concrete surfacesas ordered by EIC/SIC. |
| 13 | Steel painting : M & L for applying two coats of synthetic enamel paint finished glossy of 1st quality; (Make: Asian / Berger / ICI or substantially equivalent), and approvedshade over a coat of priming with red lead primerafter necessary preparation of new decorated steel surfaces of any description over 10 cm width or girth as ordered by EIC/SIC. |
| 14 | Single brick flat soling : M & L for providing single brick flat soling with well burnt soling brick including filling of interstices with white sandas ordered by EIC/SIC. |
| 15 | Demolition of brick work:Labour only for demolition & dismantling of brick work or stone/boulder masonry of any typebuilt in cement morter including all quoins, arches, pillars etc as order by EIC & SIC. |
| 16 | Demolition of PCC : labour only for demolition of cement concrete/terrazzoof any description and in any position and removing the same out off the work site as orderd by EIC/SIC. |
| 17 | Tapping point including ferrule : M & Lfor providing Drilling and tapping cast iron/DI water mains (in position) for branch connections of 20 mm internal dia. including straight plain brass ferrules (or connecting screws) screwed both ends and fixed as ordered by EIC/SIC. |
| 18 | GI pipe 50 mm dia :S & F of 50 mm bore dia Tubes ( Make: TATA / JINDAL/ BHUSAN or substantially equvalant), \"Medium grade\", galvanised, with all fitting; fixed complete to walls and ceilings or laid in floors or fixed in proper positionincluding short lengths, with all pipe fittings such as union, ends, elbows, tees, reducingtees, adoptors, sockets, plugs, hose clips etc. and fixing to walls / trenches etc, complete with saddles (snap clips), wall clips, hooks, protective mild steel tube sleeves and cutting through walls,floors and their making goodand also cutting, screwing and waste complete as ordered by EIC/SIC. |
| 19 | UPVC pipe 50 mm dia : S & F of 50 mm bore dia Unplasticiscd PVC pipes [Make: Oriplast / Supreme / Finolex or substantially equivalent ] of pressure rating 10 kgf/cm2 to walls, ceilings or in floors etcincludingall pipe fittingsshort lengths, with all pipe fittings such as union, ends, elbows, tees, reducingtees, adoptors, sockets, plugs, hose clips etc. and fixing to walls etc, complete with saddles (snap clips), wall clips, hooks and also cutting, screwing and waste.complete as ordered by EIC/SIC. |
| 20 | UPVC pipe 25 mm dia : S & F of 25 mm bore dia Unplasticiscd PVC pipes [Make: Oriplast / Supreme / Finolex or substantially equivalent ]of pressure rating 10 kgf/cm2 to walls, ceilings or in floors etcincludingall pipe fittingsshort lengths, with all pipe fittings such as union, ends, elbows, tees, reducingtees, adoptors, sockets, plugs, hose clips etc. and fixing to walls etc, complete with saddles (snap clips), wall clips, hooks and also cutting, screwing and waste.complete as ordered by EIC/SIC. |
| 21 | UPVC pipe 15 mm dia : S & F of 15 mm bore dia Unplasticiscd PVC pipes [Make: Oriplast / Supreme / Finolex or substantially equivalent ] of pressure rating 10 kgf/cm2 to walls, ceilings or in floors etcincludingall pipe fittingsshort lengths, with all pipe fittings such as union, ends, elbows, tees, reducingtees, adoptors, sockets, plugs, hose clips etc. and fixing to walls etc, complete with saddles (snap clips), wall clips, hooks and also cutting, screwing and waste.complete as ordered by EIC/SIC. |
| 22 | Stop valves 50 mm dia: S & F of 50 mm dia Stop valves ( Make: NETA / ZOLOTO / ALTO or substantially equvalant) , cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe/UPVC pipe or for unions and fixedin proper position complet as ordered by EIC/SIC. |
| 23 | Stop valves 25 mm dia: S & F of 25 mm dia Stop valves ( Make: NETA / ZOLOTO / ALTO or substantially equvalant), cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixedin proper position complet as ordered by EIC/SIC. |
| 24 | Stop valves 15 mm dia: S & F of 15 mm dia Stop valves ( Make: NETA / ZOLOTO / ALTO or substantially equvalant), cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixedin proper position complet as ordered by EIC/SIC. |
| 25 | Bib taps: S & F of Bib taps of (Make: Alto/ Zolota / Neta or substantially equvalant) castcopper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed bib taps size of tap 15 mm bore dia. as ordered by EIC/SIC. |
| 26 | Water proofing treatment :S & F of polymeric bituminous water proofing membrane of 2 mm thick (approx.) of wt. 2.25 kg./ sqm to be laid over ( after applying)one layer of blown bitumen on existing surface after necessary preparetory work and then another layer of blown bitumen to be applied over the newly laid water proofing membrane ( bitumen Grade for both the layers should be 30/40 and total quantity of bitumen on both layers should be minimum @ 2.4 kg / sqm )all complete as orderedby EIC/SIC. |
