Tender For Construction Of New Office Building In Sathankulam Town Panchayat.
Tender Value
Ref. Documents
Estimated cost
Bid Submission
09 Aug 2024
0 days left
EMD
1.17 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
sathankulam → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Construction Of New Office Building In Sathankulam Town Panchayat.
BOQ
| Sl. No. | Item Description |
| 1 | Earth work excavation for foundation and depositing on bank with in the initial lead of 10m and a lift of 2m in hard stiff clay, stiff block cotton, hard red earth, shales, murram, gravel, stoney earth and earth mixed with small size boulders etc.,as per SS 20 A. TNDSS NO: 23 & 24 VI (S2) VI,VII 9,10with standard specifications. |
| 2 | First Depth |
| 3 | SecondDepth |
| 4 | Plinh Beam |
| 5 | Collection supply and filling of well gravel filling approved quarry including cost andConveyance of all materials to site and all labour charges for filling etc., Complete. |
| 6 | Refilling with excavated soil (other than sand) complying with standard specification for filling in foundation and basement. PWD SOR Pg No - 23 |
| 7 | Collection supply and filling of M sand filling approved quarry including cost andConveyance of all materials to site and all labor charges for filling etc., Complete |
| 8 | Plain Cement Concrete 1:4:8 Mix (one part cement, four part sand and Eight part of aggrigate) using 40 mm size ISS HBG metal from approved quarry including cost and conveyance of all materials to site. Loading and unloading charges and labour charges for mixing. Laying and curing etc., complete as per TNDSS NO : 28 & VI (S2) VI (S5A) VII standard specifications as directed by Engineer incharge. |
| 9 | Supplying and erecting centering to sides and soffits including supports and strutting with necessary cross bracing for plain surface such as RCC slabs rectangular beams all beams lintels etc., centering for soffits upto 3 meter height using mild steel sheet of size 90 cm x 60 cm x 10 mm gauge with MS angles of size 25mm x 25mm x 3mm laid over silver oak (CW) joists of size 10cm x 6cm spaced upto 90cm c/c and casurina props or 10 cm to 13 cm dia spaced at 0.750 cm c/c complying with standard specifications as per TNDSS NO : 30 & 86. |
| 10 | Foundation and Basement |
| 11 | Supplying and erecting centering to sides and soffits including supports and strutting with necessary cross bracing for plain surface such as RCC slabs rectangular beams all beams lintels etc., centering for soffits upto 3 meter height using mild steel sheet of size 90 cm x 60 cm x 10 mm gauge with MS angles of size 25mm x 25mm x 3mm laid over silver oak (CW) joists of size 10cm x 6cm spaced upto 90cm c/c and casurina props or 10 cm to 13 cm dia spaced at 0.750 cm c/c complying with standard specifications as per TNDSS NO : 30 & 86. |
| 12 | For plane surfaces such as RCC floor slab, roof slab, beams, lintels, bed blocks, landing slab, waist slab, portico slabs and beams, etc. |
| 13 | For plane surfaces such asrectangular or square RCC columns, sunshades, top and bottom slab of RCC boxing, etc. |
| 14 | Providing and laying in position, Standardised Concrete Mix M-20 Grade in accordance with IS:456-2000, using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 325 kg/mᶾ and maximum water cement ratio of 0.55, including admixture (plasticiser / super plasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (5 cu.m.) 7730 kg. of 20mm machine crushed stone jelly and with about (3.3 cu.m.) 5156 kg. of 10-12mm machine crushed stone jelly and with about (4.79 cu.m.) 7670 kg. of sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers.The coarse and fine aggregates to be used should comply with the requirements of IS Standards.(No separate payment will be made by the Department for the excess usage of materials). |
| 15 | Foundation and Basement |
| 16 | For Ground floor |
| 17 | For First floor |
| 18 | For Terrace floor |
| 19 | Supplying and fabrication of steel and placing in position of TMT steel rods for RCC works as per design given including cost of steel and GI binding wire in all floors etc., complete complying with standard specification in TNDSS NO:97 V,VI (S6) VII (S6), VI |
| 20 | Brick Work in Cement Mortor 1:5 Mix (one cement, five sand) using new best II Class Bricks of size9 ” x 4 3/8 “x 2 3/4 ”from approved quarry including cost and conveyance of all materials to site. Loading and unloading charges and labour charges for mixing, laying and curing etc. complete. Complying with std. specifications. |
| 21 | For foundation & basement |
| 22 | In Ground floor |
| 23 | In First floor |
| 24 | In Terrace floor |
| 25 | Brick Partition Walls using III class country bricks of size 8 3/4\"X43/8\"X 23/4\"in C.M 1:3using hoop iron reinforcement,if found necessary standard specification including finishing, curing,etc., complete complying with standard specification |
| 26 | In Ground floor |
| 27 | In First floor |
| 28 | Supply and fixing of Country wood frame with country wood fully panelled and single leaf (two equal panels) shutter for door including all labour charges cost and conveyance of all materials to site etc., Complete as per standard specification. |
| 29 | Supply and fixing of teak wood scantling wrought and put up for frame of door and window including fixing hold fast including cost and conveyance of materials to site etc., Complete |
| 30 | Supply and fixing of Teak wood fully panelled and single leaf (two equal panels) shutter for door including all labour charges cost and conveyance of all materials to site etc., Complete as per standard specification |
| 31 | Supplying and fabrication and fixing in position of anodisednatural colour matt fininsh sliding Doorin TWOtrack in all floors with following sizes. All the two shutters with slinging entering and made with UPVC (ultra Polyvinyl Chloride )section for outer frames as shown below with necessary accessories such rubber beading.clips,handle and fixing 5 mm thick clear sheet glass including all required for fabrication etc., complete. Necessary dismantling making holes in RCC columns, beams, mansory wherever necessary with power drill to the extent required and made good to the original conditions after fixing as directed by the dePart ofmental officers.(All materials should be got approved by the Executive Engineer before fixing in position) |
| 32 | UPVC WindowSpecification: Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black Colour) covered with over all the edges of frame and shutter the shutter will be provided with Spig multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown Colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. PWD SOR - Pg No 70 |
| 33 | Supplying and fixing UPVC (Un-Plasticized Polyvinylchloride) Louvered Ventilators of from the profile the size of outer frame 60mm x 58mm and shutter profile size of 60 x 78mm both profiles are reinforced with GI/1mm 125GSM and 100% corrosion free, the profile are multi chambered sections with wall thick of 2mm. The EPDM rubber (black Colour) covered with all over the edges of frame and shutter. The corners and joints should be welded and cleaned. Radiations pin headed glass 4mm thick should be provided in the louvers. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The ventilator should be got approved from the Executive Engineer before use on work PWD SOR - Pg No 71 |
| 34 | Paving the floor with descrgned coloured vitrified tiles of size 600 x 600 x 8mm of best quality and approved variety complying / confirming ISI specification land over cement mortar 1:3 (one cement and three sand) 20mm thick and pomted with same coloured cement neatly etc., complete. |
| 35 | Laying with new C.C. Laminated tiles (Like Dora tiles Eurocon tiles etc),(anti skid) of 20mm thick of approved spl quality and set in Cement Mortar 1:3 (1 of cement and 3 of M- Sand ) 20mm. Thick using river M- Sand and pointing with colour cement using at the rate of 0.40 kg/M2 and mixing with colour pigment at the rate of 0.3 Kg/M2 including finishing complete with Standard Specification and as directed by the DePart ofmental Officers etc.,. |
| 36 | Supplying and fixing over the floors best quality of scratch ceramic tiles of 30 c.m x 30c.m x 6mm sizeof approved colour laying with cement mortor 1:3 mix pointing the joints with colour pigments etc.Complete. |
| 37 | Dadooing the walls with glazed tiles of 30 c.m x 20 c.m 6mm size laid in cement mortor 1:2 mix 10mm thick and pointing with 0.40 kg white cement per m2 etc. |
| 38 | Special ceiling Plastering in Cement Mortor 1:3 Mix (one Cement, Three sand ) 10mm thick including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing etc. complete . complying with std. specifications-10 m2. |
| 39 | Plastering in Cement Mortor 1:5 Mix (one Cement, five sand) 20mm thick including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing etc. complete. Complying with std. specifications. |
| 40 | Plastering in Cement Mortor 1:5 Mix (one cement, five sand) 12mm thick including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing etc. complete. Complying with std. specifications |
| 41 | Emulsion paint Two coats with good quality of approved Emulsion paint including cost of all materials to site and all labour charges for mixing applying and proper curring etc., Complete as per Standard Specifications |
| 42 | Painting Two Coats on new Iron works with best synthetic enamel paint of approved colour and quality |
| 43 | Painting two coats over the new wood work using ready mixed enamel paint including cost of all materials to site and all labour charges for mixing applying etc., Complete as per Standard Specifications |
| 44 | Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase using 50mm Dia 304L Grade Stainless Steel pipe of 1.60mm thick at required locations to a height of 900mm from finished floor level welded to 38mm Dia Stainless Steel pipe post of 1.00mm thick as vertical at 900mm center with 2 Nos. of 25mm Dia intermediate horizontal stainless steel pipe of 1.60mm thick in between. The vertical pipe has to be welded to the 100 X 100 X 6mm MS base plate encased in the base concrete. The rate is inclusive of the charges for cutting, bending, welding, grinding, polishing, conveyance, electrical charges, etc. complete (PWD SOR , Pg No - 62) |
| 45 | Supplying and fixing of M.S grill of approved design for doors, windows and ventilators using necessary mild steel flats for inner and outer memebers which should be fixed to window frames inclusive of priming coat of best approved quality red oxide primer etc., complete complying with standard specifications. |
| 46 | Weathering Course with broken brick jelly 20mm size pure slacked lime over R.C.C. roof slab the preparation of 32:12.5 for required depth and slope etc.complete. |
| 47 | Finishing the top of roof with one course of machine pressed tiles 20 C.m x 20 C.m x 2 C.m size using cement mortor 1:3 mix mixed with 2% by weight of Crude Oil and pointing with Cement Mortor 1:3 mix Cost of all materials and labour charges and brick jelly concrete etc., complete as per standard specifications. |
| 48 | Plain Cement Concrete 1:2:4 Mix (one Part of cement, two Part of M- Sand and four Part ofaggrigate) using 20mm size ISS HBG metal machine crushed from approved quarry including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing etc., complete as per TNDSS NO: 28 & VI (S2) VI (S5A) VII standard specifications as directed by Engineer incharge. |
| 49 | Providing and laying WMM (Wet Mix Macadam) of specified on the prepared sub base with graded stone aggregate and granular material of quality size and grading pasting in layor with motor grader and compaction with vibratory rollers of 80-100 KN static weight and fine dressing for required grade and cross slope as shown on the drawing equipments equipments safety measures testing and incidents necessary to complete the work as per MORTH 406 |
| 50 | Supplying and laying Rubberised interlock concrete paver of approved make as per Vendor list, at Petrol pump driveways with M40 grade concrete blocks with minimum thickness of 83mm forIS 15658-2006 and providing minimum 100mm thickstonedust cushion below the uniform shap of approved make be laid in fluring bone pattern with approved non skitting surface in the top and the rate including levelling the base preparation ofpavers as sub base, stonedustfiling 100mmthick out of pavement cut the pieces to fix the edge vibring the pavers,sweeping tranporting loading unloading and laying paver block approved standard specification,. |
| 51 | Supplying and fixing in position best approved of BIS quality PVC rain water down fall pipes having a pressure of 4 kg. / sq.cm including cost of necessary PVC shoe, PVC bend, cast iron gratings of required diameter and special clamps, brass screws, nails, etc., and fixing of cast iron gratings at junction of parapet and the RCC roof slab including finishing neatly etc., complete. The rate shall be inclusive of cast of removable cast iron grating. The PVC pipe shall be fixed in wall with special type of \"U\" clamp at the center of the pipe line in addition to those for more than 3.0 metre pipe length, etc., complete complying with standard specification. |
| 52 | 110mm Dia PVC Pipe |
| 53 | Supplying and fixing in position best quality P.V.C soil/ waste pipes (6KSC) of various sizes having ISI mark and providing leakproof joints including fixing to the wall with P.V.C/ M.S clamps etc., and making connection to all sanitaryfittings, dismantling masonry/R.C.C. works wherever necessary and making good the dismantled portion to the original condition, complying with standard specifications. |
| 54 | 110mm Dia pipe above & below ground level |
| 55 | 75mm Dia pipe above ground level |
| 56 | Supplying and fixing ofPVC Water tank of approved quality including cost of all materials like tank fittings, lead .lift, erecting etc. complete.(PWD SOR 2023 - 2024, P.NO-54) |
| 57 | Supplying and fixing in position first quality and approved variety of Gun metal Gate Valve / Wheel Valve with BIS make of the following Dia including cost of shellac, thread balls, etc., complete complying with standard specifications (for both internal and external water supply arrangements).The valves to be used on work shall be got approved by the Executive Engineer before use on work. |
| 58 | 25mm Gun metal Gate Valve |
| 59 | 32mm Gun metal Gate Valve |
| 60 | Supplying and fixing in position 15mm Dia brass CP screw down tap / Pillar tap (heavy duty) of approved make conforming to BIS specifications and quality including cost of shellac, thread, etc., complete complying with standard specification and including cutting and threading wherever necessary.(Taps should be got approved by the Executive Engineer before use on the works) |
| 61 | SD Tap |
| 62 | Pillar Tap |
| 63 | Internal Water Supply Arrangements using PVC pipes and PVC specials |
| 64 | Supplying, laying and jointing PVC pipes (having working pressure 10 kg. / sq.cm) of approved quality and best variety conforming to BIS of the following Dia including cutting, threading and fixing PVC specials using PVC adhesives (but excluding cost of such specials) and fixing into wall with teak wood plugs, PVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges, etc., complete complying with standard specifications.The PVC pipes shall be got approved by Executive Engineer before use on works. |
| 65 | Internal Concealed Line |
| 66 | 25mm Dia |
| 67 | 32mm Dia |
| 68 | External Water Supply Arrangements using PVC pipes and PVC specials |
| 69 | Supplying, laying and jointing PVC pipes (having working pressure 10 kg. / sq.cm) of approved quality and best variety conforming to BIS of the following Dia including cutting, threading and fixing PVC specials using PVC adhesives (but excluding cost of such specials) and fixing into wall with teak wood plugs, PVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges up to 4 metre height above ground level, etc., complete complying with standard specifications.The PVC pipes shall be got approved by Executive Engineer before use on works. |
| 70 | Above Ground Level |
| 71 | 32mm Dia |
| 72 | 40mm Dia |
| 73 | Supplying PVC Specials (with working pressure 10 kg. / sq.cm.) in water supply arrangements (both in internal and external water supply arrangements (PWD SOR 23-24),P.No-105 |
| 74 | Coupler |
| 75 | 15 mm Dia |
| 76 | 20 mm Dia |
| 77 | 25 mm Dia |
| 78 | 32 mm Dia |
| 79 | Elbow |
| 80 | 15 mm Dia |
| 81 | 20 mm Dia |
| 82 | 25 mm Dia |
| 83 | 32 mm Dia |
| 84 | BEND |
| 85 | 15 mm Dia |
| 86 | 20 mm Dia |
| 87 | 25 mm Dia |
| 88 | 32 mm Dia |
| 89 | Tee |
| 90 | 15 mm Dia |
| 91 | 20 mm Dia |
| 92 | 25 mm Dia |
| 93 | 32 mm Dia |
| 94 | End Cap |
| 95 | 15 mm Dia |
| 96 | 20 mm Dia |
| 97 | 25 mm Dia |
| 98 | 32 mm Dia |
| 99 | Reducer |
| 100 | 20 mm x 15 mm |
| 101 | 25 mm x 20 mm |
| 102 | 32 mm x 25 mm |
| 103 | Reducer Tee |
| 104 | 20 mm x 15 mm |
| 105 | 25 mm x 20 mm |
| 106 | 32 mm x 25 mm |
| 107 | Reducer Elbow |
| 108 | 20 mm x 15 mm |
| 109 | 25 mm x 20 mm |
| 110 | 32 mm x 25 mm |
| 111 | Jet Nipple |
| 112 | 25 mm Dia |
| 113 | 32 mm Dia |
| 114 | Supplying and fixing in position PVC specials of the following Dia and types of approved quality confirming to BIS and providing leak proof joints including fixing to the walls and giving connection to the PVC soil stacks, dismantling the masonry or RCC works and re-doing the dismantled portion to original condition etc., complete complying with standard specifications. (The PVC specials should be got approved by the Executive Engineer before use on works). |
| 115 | PVC Elbow |
| 116 | 110mm Dia |
| 117 | 75mm Dia |
| 118 | PVC Elbow with Door |
| 119 | 110mm Dia |
| 120 | 75mm Dia |
| 121 | PVC Tee |
| 122 | 110mm Dia |
| 123 | 75mm Dia |
| 124 | PVC Tee with Single Door |
| 125 | 110mm Dia |
| 126 | 75mm Dia |
| 127 | PVC \"Y\" with Single Door |
| 128 | 110mm Dia |
| 129 | 75mm Dia |
| 130 | Supplying and fixing in position best Indian make white glazed earthenware WASH HAND BASIN of 560x406mm with a a pair of C.I. Brackets, 15mm dia C.P. Pillar tap, 32mm G.I. Waster water pipe, 32mm dia C.P. Brass waster coupling, plug with chain, 15mm dia PVC connection, 15mm G.M. wheel valve with ISI mark and necessary G.I. union and G.I. Elbow, including fixing wash hand basin in position with white lead, clamps, teakwood plugs, screws, rubber washer etc., complete without any leakage complying with standard specifications. |
| 131 | White Wash Hand Basin With Pedestal |
| 132 | Supplying15mm Dia C.P.Shower rose & stop cock ofapproved make confirming to IS specifications and quality including cost ofShellac thread etc. complying with standard specification. |
| 133 | Brass Chromium Plated Shower Rose - 100mm dia |
| 134 | Chromium Plated Stop Cock 15mm dia |
| 135 | Supplying and fixing in position best Indian make Aluminium anodised TOWEL RAIL of approved quality and size 60cm long and 20mm dia with brackets of same material including fixing with necessary teak wood plugs C.P. Screws etc., complete as directed by the departmental officers. |
| 136 | Supplying and fixing in positionC.P. Soap tray of size 150 x 150mm including cost of teak wood plug and C.P. screws. etc. complete complying with standard specification. |
| 137 | Supplying and fixing in position best Bevelled Edge MIRROR of 6mm thick of size 50cm x 40cm fibre glass shelf type with necessary plywood backing and rubber button, chromium plated screws, teakwood plugs, etc., complete complying with standard specification and as directed by the departmental officers |
| 138 | Supplying and fixing in Position of Indian Oriya pan type water closet with “P’’ or “S’’ trap to set inbrick jelly concrete 1:4:8 Mix concrete 10 cm thick using 20mm brick jelly and top finished with c.m. 1:3 mix 20mm thick without any leakage etc. complete |
| 139 | White |
| 140 | Supplying and fixing in position colour glazed EUROPEAN WATER CLOSET with \"P\" or \"S\" trap and double flapped seat cover, 12.50 litres capacity P.V.C. low level FLUSHING TANK including all internal fittings fixed on C.I. brackets, 12mm PVC or brass nipple, chromium plated brown headed stopcock, 12mm nylon connection with necessary teakwood plugs, clamps, screws to the portion coming with walls and floors, including dismantling masonry and redoing the same to the original condition. |
| 141 | White EWC |
| 142 | Supplying and fixing position CI Nahani Trap / Floor Trap of the following sizes with best stainless steel gratings of approved brand and quality, fixed over a bed of brick jelly lime concrete 1:2:5 (One part of lime, two part of Sandand five part of 40mm gauge brick jelly) and finished with Cement Mortar 1:3 (One Cement, Three Sand ) including dismantling masonry works wherever found necessary and making good the dismantled portions to the original condition and giving connection to the CI / PVC pipes, etc., complete complying with standard specification. |
| 143 | Nahani Trap of size 100 x 75mm with stainless steel gratings |
| 144 | Supplying and fixing in position 150 x 100mm \"P\" or \"S\" stoneware gully trap \"A\" grade with CI double gratings of size 150 x 150mm and 230 x 230mm at bottom and top respectively with necessary earth work excavation laid over a bed of brick jelly cement concrete 1:3:6 (One cement, Three Sandand Six broken brick jelly) 150mm thick using 40mm size broken brick jelly including necessary brick work and plastering including dismantling masonry wherever necessary and re-doing the damaged portions to the original conditions using cement concrete 1:3:6 using 20mm stone jelly for fixing the gully trap and giving connections to stoneware sewer line etc., complete complying with standard specifications. [Earth work excavation, brick work, plastering shall be measured and paid separately]. The stoneware gully trap should be got approved by the Executive Engineer before use on works. |
| 145 | Supplying and fixing in position CI manhole covers with CI frames (Heavy duty) of size 60cm x 60cm of best approved quality as per standard specification etc., complete complying with standard specifications . |
| 146 | Construction of Inspection chambers of following sizes with earth work excavation for foundations, 23cm thick C.C 1:4:8 using 40mm HBGS jelly for foundation and brick work in CM 1:5 using country bricks, inside plastering with CM 1:3 20mm thick, inside channeling with brick work, outside plastering with C.M 1:5 12mm thick, R.C.Cprecast cover slab 75mm thick using 1:1.2:2.4 using 20mm blue granite jelly with necessary reinforcement etc. complete as directed by the departmental officers |
| 147 | Inspection chamber - 0.45 x 0.45m ( inside opening ) Upto 1m height |
| 148 | Inspection chamber - 0.60 x 0.60m ( inside opening ) Upto 1m height |
| 149 | Providing rain water harvesting using 3 No.Of RCC well rings of 90cm inner Dia (clear) with 5cm wall thickness made out of cement concrete 1:2:4 using 20mm hard broken jelly to a height of 30cm each supplying and fabricating 16 nos. of 6mm Dia MS rod vertically and 3 nos. of 6mm Dia MS rod circumferentially tied together with 18 gauge binding wire for well rings including necessary earth work excavation 1m Dia toa depth of 1m, supplying and filling 40mm HBG inside the erected well ring to a depth of 90cm, and top covered with RCC circular perforated cover slab of 1m Dia and 5cm thick which inclusive of cost and fabrication of 6mm M.S reinforcement at 15 cm spacings on both directions and one 6mm M.S rod ties at the edge of the slab circumferentially including cost of moulding, curing, finishing and well placing in position and disposing off excavated earth with all initial leads and lifts in places as shown by the Departmental officers etc., complete in all respects. |
| 150 | Conducting geophysical survey for selecting bore well point / yield list |
| 151 | Drilling 150mm deep vertical bore well in all clause of soils /hard rock area including all transportation charges of rigid and labour charges etc complete |
| 152 | Supply and fixing in position of 180mm PVC casing Pipe 6 KSC |
| 153 | Supply and delivery ofsubmersible pump set motor 75Lpmx175 M Head with necessary accessories ISI make including cost and conveyance charges to site and etc., complete. |
| 154 | Supply and delivery of75 Lpmx175 M Head submersible pump set motor PannelBoard ISI make including cost and conveyance charges to site and etc., complete. |
| 155 | Supplying and delivery of 4.0 Sq.mm of PVC insulated and sheathed 3 core flat type copper cable confirming to IS694/ 1990etc complete as per standard specification. |
| 156 | Supplying and delivery of 50 MM GI Pipe B classISI make including cost and conveyance charges to site and etc., complete. etc complete as per standard specification. |
| 157 | Labour charges for the erection of submersible pumpsetin borewell/openwell including fixing and jointing submersible cable withproper clamps upto the starter to required depth and also fixing of riser pipes to the required depth valves erection clamps, pressure gauges upto the exterior wall of pump room and erection of panel board consisting of TPICN switches starter, voltmeter, Ammeter, three pilot (indicating) lamps capacitor single phasing preventor, water level guard and laying and jointing the cables and twin earthing as per IE rules etc., complete and testing the pumpset and trail run for 10 days.SL.NO 17C-2 |
| 158 | Wiring with 2x1.5sqmm PVC insulated single core unsheathed copper conductor cable of 1100V grade with ISI mark confirming to IS: 694/1990 in suitable PVC rigid pipe of 1.8mm thick with ISI mark concealed in wall and ceiling with PVC accessories in flush with wall including the cost of cable, pvc pipe and specials, ceiling rose, flush type 5ams SP mark switch,PVC junction box, 16gauge MS switch box 100mm x 100mm x 75mm covered by laminated hylem sheet 3mm thick, cement, Labour and making good of concealed portion with suitable Colour for concealed PVC LIGHT/FAN point.(SD 24) |
| 159 | Supply and fixing of single box type 4\"40W fluorescent fitting complete with copper choke and condensor with conduit pipe suspension from the ceiling with PVC unsheathed copper leads from terminals to the fitting with tube.SD 89 |
| 160 | Supply anddelivery of 20W LED Tube Light for T8 Fitting (Single Side)complete as per Standard Specification. (SOR 2024-25, Pg No: 166, M-1278) |
| 161 | Supply anddelivery of 15W LED Bulbcomplete as per Standard Specification. (SOR 2024-25, Pg No: 166, M1283) |
| 162 | Supply and fixing of WT bulk head fitting with guard suitable for incandescent lamp with 60W bulb (SD 83) |
| 163 | Supply and run of 4 of 6 sqmm (84/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V grade in 32mm G.I pipe (Class \"B\" bent at both ends with necessary angle iron up right and end supports for mains(SD No.73)Page No -33 |
| 164 | Supply and run of 4 of 6 sqmm (84/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V grade on7/20 GI bearer wire for service connection mains(SD No.68) |
| 165 | Supply and fixing of 300mm (12\") sweep (light duty) AC exhaust fan complete with necessary wall opening and making good of the wall (SD 114) |
| 166 | Wiring with 2x1.5sqmm (22/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100 V grade in suitable PVCrigid pipe concealed in wall and ceiling with PVC accessories, in flush with wall, with 150mm x 100mm x 113mmTW switch box with 3 mm thick Hylem sheet cover for 5 A 3 pin non inter locking CS Plug with continuous earthwire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour for concealedPVC plug point (SD 38) |
| 167 | Supply and fixing of TNEB meter board suitable for 32 A threephase service connection with3 nos of32A fuseunit (500 V) 32A neutral link and earth link (1\"X18\" copper flat) on TW plant of size 600mm X 450mm X19 with supporiting TW reepers of 1 \" thick an either side withpainting with suitable bolt and nuts for fixing the TW plank on wall with earth connection and inter connection with 7/20 PVC insulated copper wire from EB meter to fuse unit (SD No.127) Page No -59 |
| 168 | Supplying and Fixing A.C Ceiling fan complete 1200mm (48”) sweep with 300mm Down Rod , with regulator ( Crompton make ) including cost and conveyance charges fixing and its position etc complete SD 106 ISI make with standard specification. |
| 169 | Supply and fixingof 3 phase 4 wire 4way ICDB of 32 Amps per way with 100Amps TPNMC switch with suitable trunking box ms cable entry boxes and internal connection on suitable angle iron frame work with earth connection etc complete as per std sepcification.(SD177) Page No -67 |
| 170 | Wiring with 2x4 sqmm(56/0.3) PVC insulated SC unsheathed Cu.Conductor cable of 1100V grade in suitable heavy gauge MS conduit pipe concealed In wall and ceiling with M.S.accessories in flush with wall with 150mm x100mm x 75mm MS switch box concealed type with 3mm thick hylum sheet cover for 15A 3 pin flush type noninterlocking C.S.plug with continuous earth wire connection of 14SWG TC wire and rnaking good of the concealedportion with suitable colour for concealed power plug point SD 15 |
AI Tender Summary
Tender Timeline
Jul 27, 2024
11:30 IST
Tender Published
Tender notice published.
CompletedAug 09, 2024
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedAug 09, 2024
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender