Public Administrative Department Local Bodies Closing in 0 days TDR #44435876

Supply And Fixing Of Timers Spare Material Under Mgf In Nalgonda Municipality

Issued by Local Bodies · NALGONDA, Telangana
Tender Value
3.08 Lakhs
Estimated cost
Bid Submission
31 Jul 2024
0 days left
EMD
7710
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
NALGONDA → Telangana
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Supply And Fixing Of Timers Spare Material Under Mgf In Nalgonda Municipality-1. RAW WATER INLET AND CASCADE AERATOR a) C.I. Sluice valve of 450 mm dia with necessary tailpieces complete. b) Pedestal type flow meter 0 to 12 mld (Integrated, reading and recording type preferably Mahendra&Mahendra) One Set One No. 2. CHEMICAL DOSING EQUIPMENT a) Alum dosing mechanisms b) Alum Dissolving – Mechanism for each of Alum Solutions tanks – 4 Nos. c) Alum Solution feed pipe arrangements complete along with control valve. d) Platform weighing machine of 500 Kg capacity One Set One Set One Set One No. 3. FLASH MIXER CHAMBER: a) Mechanism for instantaneous mixing of Alum solution with raw water. b) Gravity type desludge mechanism up to disposal point One Set One Set 4. CLARIFLOCULATOR: a)Central Mechanism for Driving Bridge over rails motors and fabrication of walkways with hand rails b) Mechanism for flocculation and raking in the flocculation compartment with driving motors c) Mechanism for raking in clarifier compartment d) Central scrapper frame with brushes. e) Sludge discharge device with a minimum size of 250 mm dia CI pipe, sluice valve along with necessary pipe connections etc., for complete with telescopic desludging. One Set One Set One Set One Set One Set 5. FILTRATION PLANT a) Filter media of gravel and sand of suitable characteristics b) Filter under drainage system of suitable capacity c) Wash water and waste water gutters and appurtenances. d) The influent and effluent pipe gallery together with valves, inlet and out let connections including all appurtenances. e) Automatic rate of flow controller for each filter bed. One Set One Set One Set One Set One Set 5. f) Rate flow gauge for each filter bed for inlet and out let. g) Loss of head gauge for each filter bed h) Air blower of suitable capacity along with air pipe system complete for air scour. i) Back wash arrangements complete with water main. j) (i) Wash water pumpsets of suitable capacity (centrifugal) in duplicate with connections suitable capacity and suction delivery connections (ii) Wash water tank pipe connections, control valves and controllers etc., complete. k) Surface wash system comprising of necessary pipe connections, controls etc., complete. One set One set One No. One set One No. One set l) Bypass arrangements to feed filter beds directly including necessary pipe connections diversion arrangements etc., complete. m) Suitable length of 600 mm dia PSC 6 KSC class clear water main from filtration plant outlet upto inlet of clear water sump with valves specials etc., n) All the jointing material suitable bolts, washers, should be provided with GI materials. One set One set One complete job 6. Isolated CHLORINATION EQUIPMENT a) Gravity type gaseous chlorinator of capacity 0-3 Kg/Hr. b) Solution feed equipment with pipe line control valves and other fittings etc., complete. c) Spares for Chlorination equipment d) Platform scale type weighing machine of 1000 Kg capacity One No. One set One set One No. 7. LABORATORY EQUIPMENT a) Comparator test set for measurement of residual Chlorination using chloro-scope. b) P.H. Test kit with different discs for measurement for PH c) Jar test apparatus for determining optimum alum dosage d) Turbidity meter e) Analytical balance with weights box. f) Fume cup board g) Conductivity meter h) Equipment and reagents required for analysing alum percentage in the ferric alum. i) Test bench fully equipped with glass apparatus for sampling and testing of water before and after treatment j) Equipment and reagents required for analysing chlorine percentage in bleaching powder. One No. One Set One No. One No. One No. One No. One No. One Set One set One set k) Necessary furniture: (i) Wooden Stools (ii) Wooden Almarah (Big Size) One No. One No. 8. a) Erection and testing charges of the plant and the equipment supplied under item No. 1 to 7 b) Trail run and maintenance charges for a period of 90 days including all labour charges and chemicals & consumables and water will be supplied free of cost by the department during this period, (The rate of 8.a. and 8.b. be shown separately) Testing of the treated water and comparing with National Standards. One Unit One Unit 9. SPARES AND WORKING TOOLS:

AI Tender Summary

OUR REF NO 44435876
AUTHORITY Local Bodies
TENDER VALUE 3.08 Lakhs
LAST DATE 31-07-2024
Authority
Authority Name Municipalities
Work Description Supply And Fixing Of Timers Spare Material Under Mgf In Nalgonda Municipality-1. RAW WATER INLET AND CASCADE AERATOR a) C.I. Sluice valve of 450 mm dia with necessary tailpieces complete. b) Pedestal type flow meter 0 to 12 mld (Integrated, reading and recording type preferably Mahendra&Mahendra) One Set One No. 2. CHEMICAL DOSING EQUIPMENT a) Alum dosing mechanisms b) Alum Dissolving – Mechanism for each of Alum Solutions tanks – 4 Nos. c) Alum Solution feed pipe arrangements complete along with control valve. d) Platform weighing machine of 500 Kg capacity One Set One Set One Set One No. 3. FLASH MIXER CHAMBER: a) Mechanism for instantaneous mixing of Alum solution with raw water. b) Gravity type desludge mechanism up to disposal point One Set One Set 4. CLARIFLOCULATOR: a)Central Mechanism for Driving Bridge over rails motors and fabrication of walkways with hand rails b) Mechanism for flocculation and raking in the flocculation compartment with driving motors c) Mechanism for raking in clarifier compartment d) Central scrapper frame with brushes. e) Sludge discharge device with a minimum size of 250 mm dia CI pipe, sluice valve along with necessary pipe connections etc., for complete with telescopic desludging. One Set One Set One Set One Set One Set 5. FILTRATION PLANT a) Filter media of gravel and sand of suitable characteristics b) Filter under drainage system of suitable capacity c) Wash water and waste water gutters and appurtenances. d) The influent and effluent pipe gallery together with valves, inlet and out let connections including all appurtenances. e) Automatic rate of flow controller for each filter bed. One Set One Set One Set One Set One Set 5. f) Rate flow gauge for each filter bed for inlet and out let. g) Loss of head gauge for each filter bed h) Air blower of suitable capacity along with air pipe system complete for air scour. i) Back wash arrangements complete with water main. j) (i) Wash water pumpsets of suitable capacity (centrifugal) in duplicate with connections suitable capacity and suction delivery connections (ii) Wash water tank pipe connections, control valves and controllers etc., complete. k) Surface wash system comprising of necessary pipe connections, controls etc., complete. One set One set One No. One set One No. One set l) Bypass arrangements to feed filter beds directly including necessary pipe connections diversion arrangements etc., complete. m) Suitable length of 600 mm dia PSC 6 KSC class clear water main from filtration plant outlet upto inlet of clear water sump with valves specials etc., n) All the jointing material suitable bolts, washers, should be provided with GI materials. One set One set One complete job 6. Isolated CHLORINATION EQUIPMENT a) Gravity type gaseous chlorinator of capacity 0-3 Kg/Hr. b) Solution feed equipment with pipe line control valves and other fittings etc., complete. c) Spares for Chlorination equipment d) Platform scale type weighing machine of 1000 Kg capacity One No. One set One set One No. 7. LABORATORY EQUIPMENT a) Comparator test set for measurement of residual Chlorination using chloro-scope. b) P.H. Test kit with different discs for measurement for PH c) Jar test apparatus for determining optimum alum dosage d) Turbidity meter e) Analytical balance with weights box. f) Fume cup board g) Conductivity meter h) Equipment and reagents required for analysing alum percentage in the ferric alum. i) Test bench fully equipped with glass apparatus for sampling and testing of water before and after treatment j) Equipment and reagents required for analysing chlorine percentage in bleaching powder. One No. One Set One No. One No. One No. One No. One No. One Set One set One set k) Necessary furniture: (i) Wooden Stools (ii) Wooden Almarah (Big Size) One No. One No. 8. a) Erection and testing charges of the plant and the equipment supplied under item No. 1 to 7 b) Trail run and maintenance charges for a period of 90 days including all labour charges and chemicals & consumables and water will be supplied free of cost by the department during this period, (The rate of 8.a. and 8.b. be shown separately) Testing of the treated water and comparing with National Standards. One Unit One Unit 9. SPARES AND WORKING TOOLS:
Basic Detail
Tender No E1/97/MCN/MGF/2024
Bidding Type Tender
Location
City NALGONDA
State Telangana
Key Dates
Publish Date 27 Jul 2024
Submission Date 31 Jul 2024
Open Date 12 Aug 2024
Finance
Tender Value 3.08 Lakhs
Tender Fee Ref. Documents
EMD 7710
Exemption Not Available
Document List
add9cab3-84fe-4116-9adb-7e267f161ad0.html
DocumentsList.zip

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Jul 27, 2024
11:30 IST

Tender Published

Tender notice published.

Completed
Jul 31, 2024
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Completed
Aug 12, 2024

Bid Opening Date

Technical bids will be opened and evaluated.

Completed

Tender Documents

Download All (ZIP) ↓
html

add9cab3-84fe-4116-9adb-7e267f161ad0.html

zip

DocumentsList.zip

TenderDetail
Loading tenders