Tender For Construction Of 30,000 Ltr Capacity Oht Of 12.0M Staging In Valayapatty At Kadavur Panchayat
Tender Value
Ref. Documents
Estimated cost
Bid Submission
02 Aug 2024
0 days left
EMD
17000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
kadavur → Tamil Nadu
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Construction Of 30,000 Ltr Capacity Oht Of 12.0M Staging In Valayapatty At Kadavur Panchayat
BOQ
| Sl. No. | Item Description |
| 1 | Name of the Work : Construction of 30,000 Ltr Capacity OHT of 12.0M Staging in Valayapatty at Kadavur Panchayat |
| 2 | Earthwork excavating and depositing on bank with an initial lead of 10 metres and initial lift of 2 metres in hard stiff clay, black cotton, hard red earth, shales, murrams, ordinary gravel stoney earth mixed with small sized boulders etc., SS 20Band as directed by TWAD Board Officers - for foundation |
| 3 | Second depth of 1m |
| 4 | Levelling coarse in cement concrete 1:4:8 (one cement,four sand and eight aggregate) using 40mm hard broken stone for foundation and leveling coarse including cost of all materials, mixing,placing, ramming, curing, finishing etc., complete and as directed by TWAD Board Officers. (Beyond 1.5 m to 4.5 m below GL) |
| 5 | Reinforced Cement Concrete using M30 Design mix with required cement, sand and20 mm and 10 mm Machine crushed HBGstoneincluding the cost of all materials, labour charges, mixing by using mechanical mixer machine, placing in position, lifting, vibrating by using mechanical vibrator, finishing & curing but excluding the cost of reinforcement and fabricating, centering, shuttering and strutting charges etc., complete and as directed by TWAD Board Officers. |
| 6 | For items 0 to 1.50m below GL |
| 7 | For items 0m to 4.5m above GL |
| 8 | For items 4.51m to 7.32 m above |
| 9 | For items above 7.32 m & up to 10.98 m from GL |
| 10 | For items above10.98 m & up to 14.64 m from GL |
| 11 | For items above14.64 m & up to 18.30 m from GL |
| 12 | Supply and erection of steel centering, shuttering for soffits and sides including necessary supports and strutting for all RCC works using MS sheets of suitable size of BG 10 stiffened with MS angle of size 25 X 25 X 3mm for boarding laid over I typeM.S. Truss of size 25x25x3 mm space at about 90cm c/c and supported by 40 mm GI pipe (Medium) spaced at 75cm c/c etc.,complete and as directed by TWAD Board Officers.PLANE SURFACES |
| 13 | 0 to 3.30m |
| 14 | 5.30 to 6.30 m |
| 15 | 8.30 to 9.30 m |
| 16 | 11.31 to 12.30 m |
| 17 | 12.30 to 12.64 m |
| 18 | CURVED SURFACE |
| 19 | Curved Surface - 0.00m to 3.30m |
| 20 | Curved Surface - 11.85 to 12.09 |
| 21 | CURVED SURFACE- 14.75 to 14.91m |
| 22 | SQUARE COLOUMN |
| 23 | Below G.L. & Ground level to 3.30 m |
| 24 | 3.31 to 4.30m |
| 25 | 4.31 to 5.30m |
| 26 | 5.31 to 6.30m |
| 27 | 6.31 to 7.30m |
| 28 | 7.31 to 8.30m |
| 29 | 8.31 to 9.30m |
| 30 | 9.31 to 10.30m |
| 31 | 10.31 to 11.30 m |
| 32 | 11.30 to 12.30 m |
| 33 | Applying two coats using approved cement paint including cost ofone coat of white washing, cost of all materials, labour charges, etc., complete and as directed by TWAD Board Officers. |
| 34 | Supplying, fabricating and placing in position of Steel rods for reinforcement including cost of steel and binding wire and labour charges etc. complete for RCC works and as directed by TWAD Board Officers. |
| 35 | Fabrication, supply, delivery and fixing of outside MS Ladder of 45cmclear wide made out of 50 mm x 50mm x 6mm MS angle for both sides and for steps at 30cm C/C welded jointed etc ., for I staging from GL to 1st level brace (weight 4.5kg/m) IInd and IIIrd staging upto floor slab and IVth staging from floor slab to roof top. Supply, delivery and fixing of 32 mm GI pipes medium for hand rails from I stage to IVth stage. RCC M30 Grade mix for Landing slab 5 nos. at Ground Level- 1No. and above Ground Level - 4Nos. Supply and fixing of 32mm GI pipe medium for hand rails for the Landing slab. Supplying and fixing of MS Base plate of 100mm X 100mm X 6mm thick for fixing Anchore fastener bolt for fixing of hand rails at Landing slab and MS Ladder providing locking arrangements with two coats of approved enamel paint over one coat of red oxide paint as per approved Type Design and as directed by TWAD board officers. For 12 m staging |
| 36 | Providing and fixing of RCC inside access ladder in RCC 1:1.5:3 (One cement, one and half sand and three aggregates) using 20mm HBG stone including cost of reinforcement, placing grill in position, centering shuttering charges, mixing concrete curing etc., complete and as directed by TWAD Board Officers. |
| 37 | Providing RCC (1:1.5:3) Ventilator using 20mm HBG stone including cost of all materials, centering, shuttering, strutting,reinforcement, placing of concrete, finishing, curing and fixing in position on the roof slab with mosquito proof net arrangement and etc., complete and as directed by TWAD Board officers.0.15 m Dia |
| 38 | Supply, Delivery and fixing of CI Manhole frame with cover of following size including cost of all materials, fixing of MS clamps, Bolt and nuts etc.,complete and as directed by TWAD Board Officers. 0.60 x 0.60 (Heavy Duty) |
| 39 | Providing GI pipe connection arrangements for inlet, outlet scour and overflow etc. including cost of pipes, specials, valve, labour charge for lifting, aligning, cutting, threading, fixing and painting of GI pipes with two coats of approved quality enamel paint etc., complete and as directed by TWAD Board officers |
| 40 | 65mm GI Pipe |
| 41 | 65mm GI Coupling |
| 42 | 65mm GI Tee |
| 43 | 65mm GI bend |
| 44 | 65mm GI elbow |
| 45 | 65mm GI flangeset |
| 46 | 65mm GM Gate Valve |
| 47 | lifting Charges |
| 48 | GST Amount for providing Service to Government Contract Works for the above ConstructionWorks.GST Amount is the Total GST Amount for overall quoted amount above this row in column \"BB\" for all works in this package}(Refer Clause 13.2 & 13.3 of Section 2 of Instruction to Bidders (ITB) of SBD) |
AI Tender Summary
Tender Timeline
Jul 26, 2024
11:30 IST
Tender Published
Tender notice published.
CompletedAug 02, 2024
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedAug 02, 2024
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender