Tender For Tourism Development Work Kada Dham Sirathu In District-Kaushambi, 1 Tourism Development Work Kada Dham Sirathu In District-Kaushambi 2 Earth Work In Excavation By Mechanical Means (Hydraulic Excavator)/ Manual Means In Foundation Trenches A

Sharing tender

Tender For Tourism Development Work Kada Dham Sirathu In District-Kaushambi, 1 Tourism Development Work Kada Dham Sirathu in District-Kaushambi 2 Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means in foundation trenches and drain (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-incharge. All kinds of soil 3 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) 4 Boring with hydraulic piling rigs with power units, providing and installing cast in situ single under reamed piles of specified diameter and length below pile cap in M-25 cement concrete, to carry a safe working load not less than specified, excluding the cost of steel reinforcement but including the cost of boring with bentonite solution and the length of the pile to be embedded in pile cap etc. all complete. (Length of pile for payment shall be measured upto to the bottom of pile cap) 300 mm dia piles 5 Centering and shuttering including strutting, propping etc. and removal of form work for 6 Foundations, footings, bases for columns 7 Retaining walls, return walls, walls (any thickness) including attached pilasters, buttresses, plinth and string courses fillets, kerbs and steps etc. 8 Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills,staircasea and spiral staircases above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) 9 Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) 10 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more. 11 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in Cement mortar 1:4 (1 cement : 4 coarse sand) Code Description Unit Quantit 12 Stone work (machine cut edges) for wall lining etc. (veneer work) upto 10 metre height, backing filled with a grout of average 12 mm thick cement mortar 1:3 (1 cement : 3 coarse sand) including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade : (To be secured to the backing and the sides by means of cramps and pins which shall be paid for separately) Red sand stone - exposed face fine dressed with rough backing. 30 mm thick 13 Extra for pre finished nosing to treads of steps of marble stone 14 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). 15 Erection of Metalic pole of 4.50 meter to 6.50 meter in cement concrete 1:3:6 (1 Cement : 3 Coarse Sand : 620 mm Stone Grit) foundation including excavation and refilling etc. as required 16 Havells All in One Solar Street Light (LHSTAKU7CBAF015)Solar Street Light (LED based) consist of white LED luminaire (LED + Driver) rating as per • configuration along with Solar PV modules and LiFePo4 battery of given capacity, necessary control electronics, interconnecting wires / cables, module mounting structures, etc. to operate from dusk to dawnSpecification: Power output of PV Module: ≥ 75 p at 16.4 $0.2 Volt at STC Battery capacity: ≥ 12.8 V (nominal), 30 Ah at STC (1 day autonomy) Type of LED (Light source): 40Watt White LED type Ingress protection: IP65 or better Indicators on the system: Provided with 2 LED indicators: a green light to indicate charging in progress and a red LED to indicate deep discharge condition of the battery. The green LED glow only when the battery is actually being charged. Nominal bore size of tube / Thickness of tube: 65 mm / 4.5mm Height of pole (in m): 6 Battery box: Battery included in the luminaire enclosure, with water proof (IP65 or better) and corrosion resistant For more detail please refer attached quote. 17 G.S.T. Extra as per Applicable