Sales : +91-777 804 8217
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 06-09-2024 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 13-09-2024 |
| 2 | 31-08-2024 | Changes in BOQ Description and SOC | Other | 06-09-2024 |
| 3 | 30-08-2024 | Due Date Extended for tenders closing on 12-08-2024. | Admin Corrigendum Date Extend | 06-09-2024 |
| Sl. No. | Item Description |
| 1 | Taking down Cement plaster on brick or stone walls incl raking out joints hacking for key & scrubbing down with water etc complete all as specified and directed. |
| 2 | M&L for 10 mm thick Cement plaster (1:6) on other than fair faces of brick work or concrete Surafce finished fair and even w/o using extra cement complete all as specified and directed. |
| 3 | M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces, finished even and fair on walls in CM 1:4, using water proofing compound complete all as specified and directed.Note: WPC will be measured and paid for separately. |
| 4 | M&L for 5mm thick cement plastering in CM 1:3 on fair faces of cocnrete ceiling surfaces finished even & smooth wihtout using extra cement, complete all as specified and directed. |
| 5 | M&Lfor dubbing outaverage 10mm thick on irregular face of wall surfaces of soffit of slab/ chajjas/ sunshades etc in CM 1:4, complete all as specified and directed . |
| 6 | M&L for preparation of newly plastered wall surfacesand applying two coat of OBD over1-2mm (av-1.5mm) thick wall care putty to achieve smooth and even surfaces and complete all as specified and directed. |
| 7 | M&L for Preparing new plastered ceiling surfaces and applying three coat of white wash,complete all as specified and directed |
| 8 | M&L for providing and applying 2 mm thick wall careputty overexternalplastered surface to prepare the surface even and smooth, complete all as specified and directed. |
| 9 | M&L for preperation of newly plastered wall surfaces and applying two coats of Acrylic smooth exterior weather coat paint of required shade, New work applied @1.67ltr/10 sqm over and including priming coat of exterior primer applied @ 2.2kg/10Sqm), complete all as specified and directed. |
| 10 | M&L for complete removalof oldplastered wall surfaces ,applying2 mm thick wall care putty overtwo coats of Acrylic smooth exterior weather coat paint of required shade, New work applied @1.67ltr/10 Sqm over and including priming coat of exterior primer applied @ 2.2kg/10Sqm) complete all as specified and directed. |
| 11 | M&L for complete removal of existing treatment and applying two coats of oil bound distemper on wall overprimer incl 2 mm thick wall care putty andpreparation of surface complete all as specified and directed. |
| 12 | M&L for preparation of old plastered surfaces and applying two coat of white wash on ceiling complete all as specified and directed. |
| 13 | M&Lpreparation old wall surface, applying 2 mm thick wall care putty overapplying two coats of oil bound distemper on walls complete all as specified and directed . |
| 14 | Demolition brick work built in cement mortar or cement lime mortarincluding all quoins, arches, pillars etc but excludingashlar facings, dressed stone works and precast articlescomplete all as specified and directed. |
| 15 | M&L for brick work with sub class \"B\" bricks, straight or curved on plan exc. 6 m mean radius, built in CM (1:6) complete all as specified and directed. |
| 16 | M&L for brickwork with sub-class \"B\" bricks, straight or curved on plan to any radius in half brick thickwalls, built in CM (1:4), complete all as specified and directed. |
| 17 | Cutting openings, through brick walls for door, window and other openings or enlarging existing openings. converting window into door openings, etc. or cutting out defective brick work for under-pinning, including providing, fixing and removing shoring, cleaning and stacking bricks, removing surplus serviceable bricks, hard-core, etc. to store and rubbish not exc. 50m, complete all as specified and directed. |
| 18 | M&L for making good under cills (or over arches, lintels and bressummers) bulit in CM 1:6 including all pinning as necessary, complete all as specified and directed. |
| 19 | Removal of vegetation, cutting and uprooting of Trees/ plants/ bushes/shrubs growing over wall,roof and slab of any position and any location in the building including cutting of brick work or concrete in position not exc 1 sqm in area, upto chemical biocide treatment such as biocycle Glgce l\"or other chemical as aprroved by GE includong making Good the surfaces with PCC 1:2:4 type B-0 using 12.5 mm graded aggregate and finishing with 15 mm thick plaster in CM 1:4 complete all as specified and directed . |
| 20 | Use and waste of Formwork to sides of pillars, posts, struts, piers, columns and stanchions, complete all as specified and directed. |
| 21 | M&L for RCC 1:2:4, (nominal mix), Type B-0, using 12.5mm graded crushed stone aggregate for slabs supported on walls, beams and columns in floors, roofs, landings, baalconies, canopies, deck slabs and in shelves and the like, complete all as specified and directed. |
| 22 | M&L for PCC 1:2:4, type B-0, using 12.5mm gradedcrushed stone aggregate for roof kerbs, benching, coping , rounded or chamfered on edges, complete all as specified and directed. |
| 23 | S&F MS TMT bar 10mm dia & over, cut to length bent to shape required including cranking, bending spirally for hopping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm diacomplete all as specified and directed. |
| 24 | Demolition of cement concrete (reinforced) in roofs, floors (other than ground floors) beams, slabs, staircases, landing, chajjas and similar suspended item complete all as specified and directed. |
| 25 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed. |
| 26 | M&L for 25mm thick PCC 1:2:4, type B-0, using 12.5mm graded crushed stone aggregate as in floor finished rough to recieve floor finishes etc., complete all as specified and directed. |
| 27 | Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc. complete all as specified and directed. |
| 28 | Brushing neat cement slurry with 3.0kg of cement per sq. Metre complete all as specified and directed. |
| 29 | M&L for non skid ceramic coloured tile of approved shade and pattern 7mm to 8mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 Sqm in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15mmthick screed bed with CM 1:6,complete all as specified and directed. |
| 30 | M&L for non skid ceramic coloured tile of approved shade and pattern 7mm to 8mm thick (square/rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15mmthick screed bed with CM 1:6,complete all as specified and directed. |
| 31 | M&L for Glazed ceramic coloured tile of approved shade and pattern on verticle surface such as skirting/dado etc. 350X250X7mm/ 450X300X7mm thick,set and jointed in neat cement slurry over 10mm thick backing coat plasterin CM (1:4) and pointed in white or coloured cement to match to coloured of tiles, complete all as directed as specified . |
| 32 | M&L for vitrified tiles 10 mm thick (square/rectangular) of light shade polished, area of each tiles n.exc 0.36 sqm in floor etc set and jointed in cement slurry, over 15mm thick screed in CM (1:6) andpointed in white or coloured cement to match the colour of tiles, complete all as specified and directed. |
| 33 | M&L for vitrified tiles 10 mm thick (square/rectangular) of light shade polished, area of each tiles n.exc 0.36 sqm in skirting/dado and riser to steps etc set and jointed in cement slurry, over 10mm thick backing coat plasterin CM (1:4) andpointed. in white or coloured cement to match the colour of tiles complete all as specified and directed. |
| 34 | M&L for Non skid ceramic coloured tile of approved shade and pattern 7mm to 8mm thick area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15mmthick screed bed with CM 1:6, complete all as specified and directed. |
| 35 | M&L for non skid ceramic coloured tile of approved shade and pattern 7mm to 8mm thick area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm in skirting/dado and riser to steps etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 10mmthick backing coat plaster with CM (1:4), complete all as specified and directed. |
| 36 | M&L for machine cut Kota stone slab flooring 18-20mm thick over cement screed bed laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing including 15 mm thick screed bed in CM 1:6, complete all as specified and directed. |
| 37 | M&L for kota stone slab16-18mm thick in riser of steps, skirting,dado and pillar laid over cement screedbed laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing including 10mm thick backing coat plater with CM 1:4complete all as specified and directed. |
| 38 | S&F Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing including 15 mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 39 | S&F granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete in cupboard shelfs, steps, jambs, pillars, window cills, cookings platforms including 10mm thick backing coat plater with CM 1:4, complete all as specified and directed. |
| 40 | Rounding to edgesof stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed. |
| 41 | Demolition of cement concrete (unreinforced) in ground floor and paving n exc 15cm thick (below or above ground level) complete all as specified and directed. |
| 42 | M&L for 75 mm thickPCC 1:3:6, type C-2, using 40mm graded crushed stone aggregate as in plinth protection complete all as specified and directed. |
| 43 | Taking down chowkhats or frames with shutter not exc 1.5 sqm (without taking off shutters from frames) and removing from site, complete all as specified and directed. |
| 44 | Taking down chowkhats or frames with shutter exc 1.5 sqm but n.exc 4.0 sqm (without taking off shutters from frames) and removing from site, complete all as specified and directed. |
| 45 | Taking down shutters of any description exceeding 1 Sqm and not exceeding 2 Sqm each and refixing in the same opening after repairetc complete all as specified and directed. |
| 46 | Taking down shutters of any description exceeding 1 Sqm and not exceeding 2 Sqm each, complete all as specified and directed. |
| 47 | S & F Pressed steel frames of profile 105 x60 mm ,1.25 mm thick, for doors with one or more rebates including necessary fixing lugs,hold fast, hinges, lock strike plate, etc. complete all as specified and directed. |
| 48 | S&F pressed steel frames of profile 125x60 mm,1.25 mm thick, for doors with one or more rebates including necessary fixing lugs, hold fast, hinges, lock strike plate, etc. complete all as specified and directed. |
| 49 | S&F 30mm thick Flush shutters, solid core construction, with partical board core and plywood face panels, commercial type on both sides, complete all as specified and directed. |
| 50 | S&F 35mm thick plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on bothrail and stile as per IS : 1003faces. The size of (Part I), kiln seasoned and chemically pressure treated, supplied and fitted to chowkats, complete all as specified and directed. |
| 51 | S&F 35 mm thick glazed & skelton shutter of 2nd class hard wood open rebated & prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut & mitred beads for securing glass/wire mesh etc size of members of shutters as SSR Part-I (2010),section 8,clause 8.24 (a), complete all as specified and directed. |
| 52 | Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed.Note: stainless steel butt hinges and necessary S S screws shall be paid separately. |
| 53 | Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 50 x 85mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant 152 SECTION 8 and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and directed. Note: i) M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately.ii) For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made, for cupboards. |
| 54 | S&F aluminium sliding windows with 50 micron powder coating, three track sliding windows with two glazed shutters, 5mm th tinted glass ordinary quality and one shutter of stainless steel wire mesh 0.36mm nominal dia of wire and average width of aperture 1.40mm including good quality of bearing handle, locks, including EPDM gasket to render the glazing, air and water tight etc complete all as specified and as directed. catalouge numbers of Jindal company or equivalent make as specified. Three track bottom - 20957, Three track top/vertical-20958, handle-20606, Interlocking-20605, Top and Bottom - 20604 complete all as specified and directed. |
| 55 | S&F factory made extruded aluminium casement windows with 50 micron powder coating doubled panelled anddouble shutters consisting of frame and mullion of 101.60X44.45X1.29 mm and shutters made of 63.5X31.75X1.29mm and to be fixed with and including EPDM gasket to render the glazing, air and water tight etc. & aluminium beeds 20mm size with and including 5mm thick glass in front shutters and stainless steel wire gauge 0.36mm dia and 1.40 aperature in inner shutters complete including following items :-(a) Stainless Steel (304 Grade) Finished Butt Hinges 150mm -2 nos per leaf.(b) Powder coated Aluminium Tower Bolt 150mm long - 2 nos per leaf.(c) Powder coated Aluminium Handles 150 mm - 1 nos per leaf. |
| 56 | S&F factory made extruded aluminium ventilators with 50 micron powder coating of frame of 63.5X38.10X1.29 mm including 5mm thick frosted glass in lower 55% portion of shutters and stainless steel wire gauge 0.36mm dia and 1.40 aperture in upper 45% portion of shutter and to be fixed with and including EPDM gasket to render the glazing, air and water tight etc. & aluminium beeds 20mm size, complete all as specified and directed. |
| 57 | Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work Conforming to Fe 290 Gde E-165, complete all as specified and directed. |
| 58 | S&F 100 mmbutt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed tuype, complete all as specified and directed. |
| 59 | S&F Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolt posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc., flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed. |
| 60 | S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5mm thick of any colour having tensile strength of 550 Mpaas in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 61 | S&F 100mmStainless steel hinges, complete all as specified and directed. |
| 62 | S&F brass door magnet/ door catcher for cabinet cupboard/ ward droobe, kitchen including suitable screws for fixings, complete all as specified and directed. |
| 63 | S&F Aluminium tower bolt of extruded section, 200mm length of bolt and fixed with screws, complete all as specified and directed. |
| 64 | S&F Aluminium tower bolt of extruded section, 200mm length of bolt and fixed with screws,complete all as specified and directed. |
| 65 | S&F 125mm size, aluminium (cast type) anodized, handle and fixed withscrews, complete all as specified and directed. |
| 66 | S&F in repair 125mm size, aluminium (cast type) anodized, handle and fixed withscrews, complete all as specified and directed. |
| 67 | S&F 300mm long aluminium alloy, anodized, sliding door bolt with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts of extruded sections or cast aluminium alloy and fixed with screws complete all as specified and directed. |
| 68 | S&F in repair 300mm long aluminium alloy, anodized, sliding door bolt with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts of extruded sections or cast aluminium alloy and fixed withscrews complete all as specified and directed. |
| 69 | S&F floor door stopper Aluminium body and tongue, anodised overall length of Cover plate of size 140 mm long with hard drawn steel spring complete all as specified and directed . |
| 70 | S&F in repair floor door stopper Aluminium body and tongue, anodised overall length of cover plate of size 140 mm long with hard drawn steel spring complete all as specified and directed . |
| 71 | M&L for PCC 1:3:6, type C-0, 12.5mm graded crushed stone aggregate as in filling pressed steel frame/ hold fast blocks etc., complete all as specified and directed. |
| 72 | S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, complete all as specified and directed. |
| 73 | M&L for preparation of new wooden surface of any description not otherwise described over 10cm width or girth and applyingtwo coat of syntheatic enamel paint over one coat of pink primer, complete all as specified and directed. |
| 74 | M&L for preparationfor old or previosuly treated wooden surfaces of any description not otherwise described over 10cm width or grith and applying one coats of synthetic enamel paint to wooden surface, complete all as specified and directed. |
| 75 | M&L for preparation of new or previously untreated steel surfaces of any descirption not otherwise described over 10cm width or grith and applying two coats of synthetic enamel paint incl one coat of red oxide primer, complete all as specified and directed. |
| 76 | M&L for preparation of oldsteel surfaces of any descirption not otherwise described over 10cm width or grith and applying one coats of synthetic enamel paint, complete all as specified and directed. |
| 77 | S&F 300 mm MS ordinary rat tail rod pattern springs incl roller and roller plate, complete all as specified and directed. |
| 78 | S&F aluminium door closer hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg and fixed, complete all as specified and directed. |
| 79 | S&F in repair stainlesssteel tubing of 25 mm dia chromium plated min. 1.0 mm wall thickness as in curtain rod complete incl fixing of brackets, Knobfancy typefixed with stainless steel screws etc complete all as specified and directed. |
| 80 | Dismantling wooden boarding any description, fixed in any position with nails as in shelves of cup board and pelmets of any description, complete all as specified and directed. |
| 81 | S&F 18 mm thick with min density 600 Kg/cum lead free PVC celuka ply of both side plain white colour fixed with screws, solvent cement/ adhesive to make kitchen/bed rooms cabinet sides top and bottom ,back side &shelves inside the cabinets and pull out drawer sidecomplete as per manufacturer’s specifications complete all as specified and directed. |
| 82 | S&F 18 mm thick with min density 600 Kg/cumlead free PVC celuka ply of single side rigid laminate of approved colour and other side plain white colour fixed with SS screws and solvent cement/ adhesive to make kitchen cabinet shutters and shelves complete as per manufacturer’s specifications complete all as specified and directed. |
| 83 | S&F auto closing hinges 35 mm ofcrank (KH-001) or 8 crank (KH-002) openable at 110 degree for kitchen cabinet shutters complete in all respect and fixed in position, complete all as specified and directed. |
| 84 | S&FBall bearing runners 45 mm Teles copic (KTS-20) full extension load capacity 50 kgs, complete all as specified and directed. |
| 85 | S&F D-type cabinet handles premium quality, stainless steel 304/gloss chrome/SN finished150mm long matt finished complete fixed in position, complete all as specified and directed. |
| 86 | S&F Stainless Steel 304 grade wire Basket (avg. wait 2.5 to 4 Kg. per basket) of pull out type like plain/cup & saucer/bottle/multi purpose/2-3 shelf baskets etc. for kitchens of required size complete fixed in position, complete all as specified and directed. |
| 87 | S&F Stainless Steel 304 grade Basket Cutlery of size 370X485mm premium quality complete fixed in position complete all as specified and directed. |
| 88 | Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories), complete all as specified and directed. . |
| 89 | S&F in repair 15mm dia tubes medium grade, galvanized, with all fittings such as sockets, bends, elbows, tees etc, concealed/surface fixed to walls and ceiling or laid in floors complete all as specified and directed. |
| 90 | S&F in repair 20mm dia tubes medium grade, galvanized, with all fittings such as sockets, bends, elbows, tees etc, concealed/ surface fixed to walls and ceiling or laid in floors complete all as specified and directed. |
| 91 | S&F in repair ofVitreous china wash down water closet pan (Pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe), including P or S trap, complete all as specified and directed. |
| 92 | S&F in repair for PVC water closet seat cover, white, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed. |
| 93 | S&F in repair of vitreous china squatting pan of “Orissa Pattern” of size 580x440mm white with integral footrest complete including making good floors, complete all as specified and directed. |
| 94 | S&F in repair for 10 ltr capacity PVC valveless, syphonic action type flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, 32 mm dia flush pipe, complete all as specified and directed. |
| 95 | S&F in repair 8mm dia, brass chromium plated health faucet with 1 meter long flexible hose and wall hook complete all as specified and directed. |
| 96 | S & FCP toilet paper holder with flat recessed type stainless steel, complete all as specified and directed. |
| 97 | S&F in repair vitreous china wash basin, white, flat back, size 550x400mm excluding ditto but including bracket, brass chromium plated 32 waste coupling,waste pipe etc, complete all as specified and directed. |
| 98 | S&F in repair pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered \"Hot\" or \"Cold\" with long screwed shanks and fly nuts, screwed for 15mm bore iron pipe, complete all as specified and directed. |
| 99 | S&F in repair, Brass CP WHB Mixer valve for mixing hot and cold water screwed down for 15mm dia iron pipe complete all as specified and directed. |
| 100 | S&F in repair, 15 mm fancy type chromium plated fancy type bib tap brass long body with flange screwed down high pressure CP cast copper alloy with crutch or butterfly handles scrwed down suitable complete all as specified and directed. |
| 101 | S&F Stainless steel grating openable 100mm dia size with or without hole including fixing with white cement complete all as specified and directed. |
| 102 | S&F wall brass CP mixer withHot or cold with long screwed shanks and fly nuts, screwed for iron pipe and fixed 15mm bore complete all as specified and directed. |
| 103 | S&F in repairfancy type, chromium plated Stop valves/ Angle valve of 15 mm bore cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions fixed, complete all as specified and directed. |
| 104 | S&F for PVC heavy duty waste pipes of 40/ 32 mm diasuitable for wash basin/ sinks complete all as specified and directed. |
| 105 | S&F in repair fancy type shower rose 30cm long CP brass pipe with swiwel joint in complete all as specified and directed. |
| 106 | S&F in repair PVC cabinet with looking mirror of size 350x450mm complete all as specified and directed. |
| 107 | S&F in repair sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated guard and railing 60 cm long, complete all as specified and directed. |
| 108 | S&F in repair Soap dish stainless steel, fixed to plugs with chromium plated brass screws, complete all as specified and directed. |
| 109 | S&F in repair chromium plated, towel rail, 20mm dia, D-type, 60cm long between flanges, complete all as specified and directed. |
| 110 | S&F in repair for PVC connections 15mm size with PTMT nuts of length 450mm, complete all as specified and directed. |
| 111 | S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and waste pipe incl bedding in cement mortor to dwarf wall ot cantilever brackets and connecting union to pipe overall size 915x460mm, bowl size 410x 330x160mm incl all fittings ie CP waste coupling, waste pipe, complete all as specified and directed. |
| 112 | S&F Plate rack made of stainless steel 1mm thick of size 900x600mm including shelves, racks dividing rods etc complete all as specified and directed. |
| 113 | S&F in repair 600x450mm size bevelled edge looking mirror of selected quality glass mounted on 6mm thick AC building board or commercial ply wood and fixed to wooden plug with chromium plated brass screw and cub and washer complete all as specified and directed. |
| 114 | S&F in reair 110mm bore, PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls, complete all as specified and directed. |
| 115 | S&F in repair 75mm bore, PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls, complete all as specified and directed. |
| 116 | S&F PVC (SWR) floor trap 75mm, plain with grating including jointing with solvent cement complete all as specified and directed. |
| 117 | S&F PVC (SWR) junction single, (Single T 110mm), equal or unequal with access door, complete all as specified and directed. |
| 118 | S&F PVC (SWR) junction single, (Single T 75mm), equal or unequal with access doorcomplete all as specified and directed. |
| 119 | S&F in repair PVC (SWR)bends, for 110mm bore pipes, with access doors, complete all as specified and directed. |
| 120 | S&F in repair PVC (SWR)bends, for 75mm bore pipes, with access doors, complete all as specified and directed. |
| 121 | M&L for salt-glazed stone ware gully traps, 150x 150 square or round mouthed, type \"p\" setting and jointing to drains with CM 1:1, complete all as specified and directed. |
| 122 | Dismantling water tanks of capacity exc 250 & n.exc 500 ltrs and removing from site to store, complete all as specified and directed. |
| 123 | Dismantling water tanks of capacity exc 500 & n.exc 1000 ltrs and removing from site to store, complete all as specified and directed. |
| 124 | S&F rotational moulded polythelene water storage tanks of 500 ltr capacity (cylindrical vertical with closed top) three layer hoisted and fixed in position complete all as specified and directed. |
| 125 | Refixing ofrotational moulded polythelene water storage tanks of 500 ltr capacity (cylindrical vertical with closed top) three layer hoisted and fixed in position complete all as specified and directed. |
| 126 | S&F rotational moulded polythene water storage tank of 1000 ltr capacity triple layered (cylindrical vertical with closed top) hoisted and fixed in position on roofs complete all as specified and directed. |
| 127 | Refixing ofrotational moulded polythelene water storage tanks of 1000 ltr capacity (cylindrical vertical with closed top) three layer hoisted and fixed in position complete all as specified and directed. |
| 128 | S&F in repair ball valve of brass, 20mm bore, high pressure with polythene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed, complete all as specified and directed. |
| 129 | S&F CI Gate valve, 20mm bore, screwed down, high pressure with crutch or butter fly handle, screwed both ends for iron pipe or unions complete all as specified and directed. |
| 130 | S&F CI Gate valve, 15mm bore, screwed down, high pressure with crutch or butter fly handle, screwed both ends for iron pipe or union, complete all as specified and directed. |
| 131 | S&F PVC (SWR) ventcowl 110mm dia, complete all as specified and directed. |
| 132 | Dismantling of brick or terracing tiles of single layers on roofs incl cleaning of bricks/tiles and removal of unusable bricks/tiles and removal from site, complete all as specified and directed. |
| 133 | Demolition of mud in roof any thickness whether full thickness removed or part thereof including plaster & leaping, complete all as specified and directed. |
| 134 | M&L for PCC 1:2:4, type B-1, using 20mm graded crushed stone aggregate as in padding to roof to maintain the required slope and finished the surface even and smooth without using extra cement, complete all as specified and directed. |
| 135 | M&L for using old brick tiles retrived from dismantling 40mm thick laid on 20mm thick screed bed of CM (1:6) and joints grouted flush in cement mortar (1:3) mixed with 5% of crude oil by weight of cement and pointed flush as the work proceeds complete all as specified and directed. |
| 136 | M&L for brick tiles 40mm thick laid on 20mm thick screed bed of CM (1:6) and joints grouted flush in cement mortar (1:3) mixed with 5% of crude oil by weight of cement and pointed flush as the work proceeds complete all as specified and directed. |
| 137 | M&L for screed bed 15mm thickin cement mortar 1:4 on concrete surfaces finished even and fair without using extra cement including mixing of water proofing compound of approved make as per manufacturers instructions on existing surfaces complete all as specified and directed. |
| 138 | M&L for APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by torch application of membrane with 10 cm over laps as complete all as specified and directed. (a) Applying evenly a tack coat of in industrial bitumen 85/25 at the rate of 1.2 kg per sq.m including cleaningsurface(b)Applying one coats of aluminium paint @ 0.2 kg/sqm. (c) M&L preparation of plaster surfaces /RCC roof surfaces and applying one coat of oil bound bituminous primer @0.03 ltr/Sqm for cleaning of roof slab/sunken surfaces including sweeping clean & washing down with water to remove dust & providing water proofing treatment with polymeric standard water proofing membrane. |
| 139 | Supply only Integral water proofing compound complete all as specified and directed. |
| 140 | M&L for sunken slab treatment comprising ofthe following :-(a) Taking out/ down old existing sunken slab treatment and cleaning the old RCC surfaces of sunken slab including removal of the rubbish from the site of work to a distance n.exc. 250m.(b) 25mm thick PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) over cleaned sunken slab surfaces.(c) Applying bituminous priming coat/tack coat overPCC surfaces @ 0.30 Kg per square metre of surfaces. (d) Applying bitumin grade 85/25 over priming coat @ 1.20 Kg per Square metre. (e) 25mm thickplastering in CM 1:4using water proofing compound (WPC) @ 3% by weight of cement.on wallof sunken floor (f) Suitable thickness of PCC 1:5:10 type E-2 (using 40mm graded broken brick aggregate) for filling in the sunken portion of slab up to its floor level.(g) 32mm dia GI pipe medium grade, 450m long (for draining out the water) complete all as specified and directed. |
| 141 | Chipping off unsound /weak concrete materials (including taking down old cement plaster) from slabs, beams, columns, lintel, chajja, fin, facia etc. by any means as directed by Engr-in-charge including tapering all edges, making square shoulders of cavities air or sand blasting etc and cleaning of exposed concrete surface of lightly picking materials by air blasting or sand blasting incl foreign materials, loose concrete/aggregate etc and disposal of all debris out of MOD land and complete all as specified and as directed incl necessary scafolding (upto 4 storey of building) for 25mm average thickness for slabs/Chajja, complete all as specified and directed. |
| 142 | All as per Srl Item No 141.00 above but for 50mm average thickness for beams/Lintel, complete all as specified and directed. |
| 143 | All as per Srl Item No 141.00 above but for 60mm average thickness for column, complete all as specified and directed. |
| 144 | Removing of concrete all around reinforcement including from behind the reinforcing bars to give an average 25mm (but not less than 15mm) clear air gap by manual methods (using wire brushing, chiselling etc) and applying alkaline rust removing chemical followed by removing rust including from behind the reinforcing bars by emery paper and cleaning the area thoroughly by water and allow it to dry all as per manufacturer\"s instruction to give it a totally rust free finished steel surfaceincl necessary scafolding, upto 12 mm dia bar (upto 4 storey of building), complete all as specified and directed. |
| 145 | M&L for providing single coat of epoxy bond adhesive of prepared non metallic surface (existing surface) (upto 4 storey of building)and applying by brush all as per manufacturer\"s instruction/ specification. The bonding agent shall have minimum compressive strength of 40 N/Sqmm, complete all as specified and directed. |
| 146 | Supply and application of Epoxy Zinc rich primer on the prepared steel surface by brush the primer shall have a minimum specific gravity 1.75 minimum weight film thickness/coat 40 microns and minimum adhesive bond strength with steel is 1.5N/mm2 incl necessary scafolding upto 4 storey of building, complete all as specified and directed. |
| 147 | M&L for introducing new reinforcement bars for structural connection in RCC beams, columns, lintel and slabs including power drilling holes of appropriate diameters in reinforced or plain cement concrete to a minimum depth of 150mm and upto 200mm including power drilling, fixing the reinforcement in position using epoxy, cleaning of loose dust by blowing air, sealing with epoxy cartridges etc incl necessary scafolding Upto 12 mm dia bar (upto 4 storey of building), complete all as specified and directed. |
| 148 | M&L for introducing new reinforcement bars for structural connection in RCC beams, columns, lintel and slabs including power drilling holes of appropriate diameters in reinforced or plain cement concrete to a minimum depth of 150mm and upto 200mm including power drilling, fixing the reinforcement in position using epoxy, cleaning of loose dust by blowing air, sealing with epoxy cartridges etc. Above12 mm dia bar incl necessary scafolding (upto 4 storey of building, complete all as specified and directed. |
| 149 | M&L for providing and placing in position free flow non shrink cementitious micro concrete of 60 mm average thickness of Column incl necessary scafolding (upto 4 storey of building) Grade of M-50 to the effected column etc. The micro concrete shall have a minimum 1 day compressive strength of 10 MPa and 28 days strength of 50 MPa, minimum tensile strength 5N/mm2 @ 28 days, minimum flexural strength 5N/mm2 @ 28 days and complete all as specified and directed. |
| 150 | M&L for providing and placing in position free flow non shrink cementitious micro concrete of 50 mm average thickness of Beam incl necessary scafolding (upto 4 storey of building), Grade of M-50 to the effected beam, etc. The micro concrete shall have a minimum 1 day compressive strength of 10 MPa and 28 days strength of 50 MPa, minimum tensile strength 5N/mm2 @ 28 days, minimum flexural strength 5N/mm2 @ 28 days and complete all as specified and directed. |
| 151 | M&L for providing and placing in position free flow non shrink cementitious micro concrete of incl necessary scafolding Add or deduct for every 10 mm thickness extra (upto 4 storey of building), Grade of M-50 to the effected beam, column etc. The micro concrete shall have a minimum 1 day compressive strength of 10 MPa and 28 days strength of 50 MPa, minimum tensile strength 5N/mm2 @ 28 days, minimum flexural strength 5N/mm2 @ 28 days and complete all as specified and directed. |
| 152 | Supply, mixing and application two component structural grade polymer modified reinstatement mortar, where local spalling has taken place or shuttering is not possible . The mortar can be applying in layers not exceeding 6mm thick in each layer in and upto any thickness in smaller vertical pockets and upto any thickness in horizontal applications. The mortar should have a minimum compressive strength 12N/mm2 in 1 day and 45N/mm2 in 28 days. Minimum flexural strength should be 8 N/mm2 in 28 days. A modified styrene butadiene emulsion for use as a bonding aid and gauging liquid for cementitious system to be mixed with cement slurry before the application of modified polymer mortar to be used @ 6 ltr/bag of cement. The bonding agent should have minimum compressive strength 24N/mm2. Minimum tensile strength 3.5N/mm2, minimum flexural strength 6.5N/mm2 complete all as specified and directed upto 25 mm average thickness and incl necessary scafolding (upto 4 storey of building), complete all as specified and directed.Note:- Cement and sand mortar in proportion of 1:2 graded coarse sand with polymer admixed in proportions approved by Engr-in-charge. |
| 153 | M&L for injecting chemical emulsion for post constructional Anti-termite treatment along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron, complete all as specified and directed. |
| 154 | M&L for treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with CM 1:2to match the existing floors soil, complete all as specified and directed. |
| 155 | M&L for treatment the soil under plinth protection at the rate of 5 litres of emultion per square meter of surface area, complete all as specified and directed. |
| 156 | S&F Mild steel powder coated 1 mm thick built in cub board shutter with frame of approved colour ,cub board frame should be 150x20mm size domestic type and fixed with (i) Hold fast of as per requirement forframe (ii) 1 No. handle in each shutter (iii) 1 no. Morticein each cub cub board (iv) Peg set of three pegsfixed with each shutter.complete fixed in repairs i.e, incl taking down and removal of old unserviceable wooden or steel built-in-cupboards incl frame from site complete all as specified and directed . |
| 157 | Excavation in trenches not exc. 1.50m wide and not exc. 1.50m depth for foundation, etc or for manholes/sewage linesetc, n.exc 10 sqm on plan and getting out in hard/dense soil complete all as specified and directed. |
| 158 | M&L for PCC 1:4:8, Nominal mix, type-D-2, using 40 mm graded crushed stone aggregate as in foundation, filling and mass concrete complete all as specified anddirected. |
| 159 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in hard/ dense soil complete all as specified and directed. |
| 160 | Removing excavated material n exc.50m and deposited where directed at a level n exc 1.5 m above the starting point in soils, complete all as specified and directed. |
| 161 | Demolition and breaking up any 150mm drain pipes (salt glazed ware, AC,reinforced Concrete) set in cement mortar, complete all as specified and directed. |
| 162 | M&L for 150mm dia reinforced concrete pipes, class NP-3, laid and jointed complete with collars complete all as specified and directed. |
| 163 | M&L for concrete bed to drain pipes of 150mm dia including packing under, and hauncing against the sides ofpipes after they are laid and tested in cement concrete 1:3:6, type C-2, complete all as specified and directed. |
| 164 | M&L forprecast cement concrete 1:2:4, type B-1using 20mm gradedcrushed stone aggregate as in cover slabs placed in position over manholes etc including use and waste of necessary formwork complete all as specified and directed.Note:- Reinforcement and handles shall be measured and paid seperately. |
| 165 | M&L for TMT bars 6 to 8mm dia and over cut to length bent to shape required and binding with ms wire (annealed) not less than 0.9 mm dia or securing with clips, complete all as specified and directed. |
| 166 | Cutting into existing manholes for 150 mm dia pipe connecting new drain making good to pipes and rendering, cutting out existing benching for forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4, type B-1, finished smooth good to pipe complete to match with the existing works complete all as specified and directed. |
| 167 | M&L for PCC 1:2:4, type B-0, using 12.5mm graded crushed stone aggregate for benching, coping shall be 150mm in radius mixed with acrylic based polymner water proofing compound, complete all as specified and directed. Note: WPC shall be measured and paid separately. |
| 168 | M&L for PCC 1:3:6, type C-1, 20mm graded crushed stone aggregate as in drain PCC incl fair finished drain or channel using extra cement including forms, moulds, mitred/stopped ends etc. complete all as specified and directed. |
| 169 | Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using ex- tra cement, including forms, moulds, mitred/ stopped end etc., complete all as specified and directed. |
| 170 | Add or deduct for each 25 mm girth or part thereof over or under 30cm ditto, complete all as specified and directed. |
| 171 | M&L for 75mm thick PCC 1:4:8, type D-2, using 40 mm graded crushed stone aggregate as in sub base complete all as specified and directed. |
| 172 | M&L for chequered cement concrete tiles pre polished 30cmx30cmx25mm thick, set jointedand pointed in neat cement slurry with grey cement and pigment in floors incl 15mm thick screed bed or bedding layer in CM 1:6, complete all as specifiedand directed. |
| 173 | M&L for 100mm thick PCC 1:4:8, type D2, using 40mm graded crushed stone aggregate as in flooring, complete all as specified and directed. |
| 174 | M&L for providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand, complete all as specified and directed. |
| 175 | Taking down carefully point wiring from existing place (light/fan, socket or power points complete) with all fittings such as switches, sockets ceiling rose , pendant holder, fitting and fixtures , MCB, Main switches, call bell etc and making good to disturbed surface to wall ,floor etc to match with existing surface either by using same colour distemper or white colour wash, complete all as specified and directed. |
| 176 | M&L for point wiring with 1.5 sqmm, PVC insulated but unsheathed, stranded copper conductor single core FRLS cable, IS-694 marked, drawn through existing metallic/ rigid PVC concealed conduit including replacement of pressed steel terminalmounting box , for mounting fittinglike modular switches, sockets, andfixed with brass screws and cup washers including one continuous run of PVC insulated 1.50 sqmm sizecopper conductor cable green in colour as a earth wire and connected to common earth dollyOne light/fan/bell/Bldg security light point controlled by one single pole one way switch,complete all as specified and directed. |
| 177 | All as per Srl item No. 176.00 above but for one 3 pin, 5 Amp, socket outlet on the same board controlled by one single pole one way switch board, complete all as specified and directed. |
| 178 | All as per Srl item No. 176.00 above but for one 3 pin, 5 Amp, socket outlet on the independetboard controlled by one single pole one way switch board, complete all as specified and directed. |
| 179 | All as per Srl item No. 176.00 above but for wiring with 2.5 sqmm copper cable and 2.5 Sqmm copper cable as continuous earth wire for one 6 pin 6/16 Amps socket outlet on independent board, complete all as specified and directed. |
| 180 | S&F modular switch 1 way 6 Amp, 1 module, 240 V flush type, complete all as specified and directed. |
| 181 | S & F modular bell push, flush type, 6 Amp, 1 module, 240 V, complete all as specified and directed. |
| 182 | S&F modular socket, 6A-2/3 pin combined, 2 module, 240 V, complete all as specified and directed. |
| 183 | S & F modular socket, 6Amp / 16Amp-2/3 pin combined, 2 module, 240 V, complete all as specified and directed. |
| 184 | S & F modular switch 1 way 16 Amp, 1 module, 240 V flush type, complete all as specified and directed. |
| 185 | S & F modular fan step regulator, 120 W, 2 module, 240 V complete all as specified and directed. |
| 186 | S & F Modular white cover plate with frame including modular metal flush box, 3 module complete all as specified and directed. |
| 187 | S & F Modular white cover plate with frame including modular metal flush box, 4 module complete all as specified and directed. |
| 188 | S & F Modular white cover plate with frame including modular metal flush box, 6 module complete all as specified and directed. |
| 189 | S & F Modular white cover plate with frame including modular metal flush box, 8 module complete all as specified and directed. |
| 190 | S&F ceiling rose polycarbonate body, 65 x 20 mm three terminal complete all as specified and directed. |
| 191 | S&F for lamp holder pvc bodywith back plate complete with 9 Watt LED lamp complete all as specified and directed. |
| 192 | S&F VTPN MCCB distribution board 4 way fabricated out of thick high quality CRCA sheet with MCCB thermal based release adjustable type 4 pole 100 Amps 50 Hz 415 Volts with rupturing capacity 36 KA, DBs shall be totally enclosed, suitable for 240V/415V, having polyurethane (PU) foam gasket to ensure IP-43 degree of protection for Indoor application aspre IEC 61439-3:2012 (CI. 10.3)/IEC 60529.DB shall be robust with tested for impact resistance IK09as per IEC 61439-3:2012(CI.No. 10.2.6).DBs shall be provided with prefitted cement Guard. DB Door shall have detachable gland plates provided with proper knockout holes of 26mm/35mm diameter for intsertion of cable /conduits. Distribution Boards shall bre provided with wire set of copper along with the insulated fork type bus bars. DB shall heve reversible hinged doors and possibility to allow door opening from left to right or right to left for convenience on site. DBshall have type test reports as per IEC 61439-3 from ERDA or NABL laboratery complete all as specified and directed. |
| 193 | S&F sheet metal enclosures for MCB distribution boardSPN 8way double door type with 200 amp rated bus bar and suitable for MCB SPN as incomer complete all as specified and directed. |
| 194 | S&F MCB SPN, 240 volts, 40 to 63 Amps, rupturing capacity 10 KA, ‘B’ curve type complete all as specified and directed. |
| 195 | S&F MCB SP 6-32 Amp ,240 V 10 KA B Curve incl all terminals , fittings etc., complete all as specified and directed. |
| 196 | M&L for replacement ofcall bell electric (ding dong type), 240 Volt , single pole, complete all as specified and directed. |
| 197 | M&L for sub main wiring with two runs of single core 6 Sqmm (nominal area) PVC insulated and unsheathed multi stranded copper conductor cable LT 1100 grade FRLS cable drawn and PVC rigid conduit 20 mm dia with all necessary fittings and accessories and one run of PVC insulated and unsheathed single core cable with copper conductor of size 6 Sqmm as earth wire (green in colour ) run through PVC rigid conduit and connected to commonearth dolly , including taking out the old sub main wiring complete all as specified and directed. Note. Two run of cable and one run of PVC conduit and one run of earth continuity wire shall be measured as one run. |
| 198 | M&L for earthing complete with galvanised steel earth plate electrode 600 x 600 x 6.0 mm thick burried directly in gorund (earth pit not less than 2.25 Mtr normal ground level),and top edge of earth plate not less than 1.5 mtr below normal ground level, connected to galvanisedmeans of earth wire 4 mm dia with bolts, nuts & check nuts, and washers of galvanised iron protection pipe light grade of 20 mm dia and watering pipe medium grade of 20 mm dia and filled with alternate layer of charcoal and common salt, watering funnel with wire mesh, earth pit chamber and cover CI frame PCC 1:3:6, type C-2, all as shown in electrical plate No-3 of SSR part-I of 2009 connected to earthing test point all as specified including all earth work excavation, returning filling and disposal of surplus soil and testing on completion, complete all as specified and directed. |
| 199 | S&F LED light fitting 1x9W/ 1X10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 200 | S&F LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 201 | S&F in replacement LED tube light fitting 4 feet, 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. |
| 202 | S&F Indoor Decorative wall brackets light fixture made up of Polycarbonate, suitable for 9 W LED lamp B22 base with plastic body suitable for 09/11W LED Bulb complete with 9/11 W LED Bulb complete all as specified and directed. |
| 203 | S&F electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE, 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc., complete all as specified and directed. |
| 204 | S&F Metal clad single pole and a neutralenclosure with a two pin and earth plug and socket with one single pole MCB SP 20 Amp, 240V, complete all as specified and directed. |
| 205 | S&F exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz,RPM 1200, Copper winding of sweep 250mm, complete all as specified and directed. |
| 206 | S&F exhaust fan heavy duty with louvers complete of sweep size 300mm, 900 RPM, single phase, with bolts, nuts and washers, size of the bolt 15 cm long 12mm dia embedded in the wall including provision of PVC flexible copper cable of size 23/00.0076 three core from ceiling rose to exhaust fan max 1.5 mtr for giving connection, complete all as specified and directed. |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
