|
| 1 | Description (MOC) of Ash Slurry Disposal Pump Model 12/10 type AH FF Pump |
| 2 | Bearing Assembly ; Part No -FFAM005M |
| 3 | Clamp Washer ; Part No -F011 |
| 4 | Camp Bolt - 1 Nut ; Part No -F012M |
| 5 | Shaft Sleeve O- Ring ; Part No -F109 |
| 6 | Shaft O-Ring ; Part No -G109 |
| 7 | F.P.L.I. Throat Bush Stud-1 Thin Self Lock Nut ; Part No -G10026M |
| 8 | Volute Liner ; Part No -G10110 |
| 9 | Frame Plate ; Part No -G10032HS1 |
| 10 | Volute LinerSeal ; Part No -G10124 |
| 11 | Cover Plate ; Part No -G10013 |
| 12 | Throat Bush ; Part No -G10083M |
| 13 | Base ; Part No -FAM003M |
| 14 | Adjusting Screw -3 Nuts -2 Washer ; Part No -F001M |
| 15 | Frame Plate Stud - 2 Nuts ; Part No -FAM039M |
| 16 | Impeller Release Collar ; Part No -FAM239M |
| 17 | Shaft Sleeve ; Part No -FAM075 |
| 18 | Impeller |
| 19 | Cover Plat Bolt -2 Nuts ; Part No -G10015M |
| 20 | Pump Pulley |
| 21 | Motor Pulley |
| 22 | Frame Plate Liner Insert ; Part No -G10041M |
| 23 | Discharge Joint Ring ; Part No -G10132L |
| 24 | Sparsfor Gland Seal ofAsh Slurry Disposal Pump Model 12/10Type AH FF Pump |
| 25 | Gland (2 Piece) ; Part No -G044 |
| 26 | Gland Bolt -1 Nut -1 Washer ; Part No -G045M |
| 27 | Packing ; Part No -G111 |
| 28 | Stuffing Box ; Part No -G078 |
| 29 | Seal Ring ; Part No -G122 |
| 30 | AVGF Backwash sump Blower, Model - SR069 |
| 31 | Shaft Key ; Part No -S070 |
| 32 | Shaft ; Part No -FFAM073M |
| 33 | Labyrinth Socket Set Screw ; Part No -M12A2-30H |
| 34 | Grease Nipple ; Part No -WP2L73-Z |
| 35 | Grease Cap ; Part No -A365 |
| 36 | Bearing Housing ; Part No -FF004 |
| 37 | Plug ; Part No -WP4P1-E |
| 38 | End Cover ; Part No -FF024-10 |
| 39 | Bearing Seal ; Part No -FF089-10 |
| 40 | Labyrinth (Drive End) ; Part No -FF062D-10 |
| 41 | End cover Set Screw ; Part No -D027M |
| 42 | End Cover Gasket ; Part No -FF025 |
| 43 | Piston Ring ; Part No -YE108 |
| 44 | Labyrinth (Non -Drive End) ; Part No -FFAM062-10 |
