|
| 1 | Taking down chowkat or frame with shutters (without taking off shutters from the frames) not exc 1.5 sqm each. |
| 2 | All as per Sl item No .01 above but exc. 1.5 Sqm but not exc. 4.0 Sqm each |
| 3 | Taking down shutters of any description not exc 1 Sqm each. |
| 4 | All as per Sl item No .03 above but exc. 1.0 Sqm but not exc. 2.0 Sqm each |
| 5 | Taking down, easing, adjusting and refixing in the same opening shutters of any description not exceeding 1 Sq. Meach and refixing builders hardware as required including renewal of unserviceable screws etc. complete. |
| 6 | Taking down, easing, adjusting and refixing in the same opening shutters of any description exceeding 1 Sq. M but not exceeding 2 Sq. M each and refixing builders hardware as required including renewal of unserviceable screws etc. complete. |
| 7 | S&F 125 x 60 mm size pressed steel door frames for doorswith one or more rebates and including necessary fixing lugs, hinges, lock strike plate etc, complete all as specified and directed. |
| 8 | S&F 105 X 60mm size pressed steel door frames of doors with one or more rebates including necessary fixing lugs, hinges lock strike plate, etc complete as specified. |
| 9 | S&F 30 mm thick factory made flush door shutters solid core construction, with block board core and plywood face fanels, commercial type on both side complete all as specified and directed. |
| 10 | Supply and fix 30mm thicksecond class hard wood glazed and skeleton, open rebated and prepared to receive glass/ wire cloth, gauze exc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc.The sizes of members of shutters as per IS-1003 (Part-2), kiln seasonable and chemically pressure treated and fitted to chowkhats complete all as specified and directed. (Note : Glass / wire cloth wil be measured and paid separately). |
| 11 | S&Fsolid PVC door frame of size 50 mm x 47 mm made out of 5 mm thick plain colour PVC sheet reinforced with MS square tube as per specification and drawing (SSR - 2020 Part-II Rates) complete all as specified and directed. |
| 12 | S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes fortop rails, bottom rails stiles & lock rail. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement as per specification complete all as specified and directed. |
| 13 | M&L for anodised aluminium power coated (minimum thickness of powder coating 50 micron) framefor doors, sliding window three track ,ventilator etc with one or more rebatesincluding all jointing cleats,etc complete all as specified and directed. |
| 14 | S & F Anodised Powder coated aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats,glazing clips, ruber neoprene packing,handles 2 Nos in each door, hinges,anodised aluminum snap beading screws etc.complete all as specified(minimum thickness of powder coating 50 micron) |
| 15 | S&Fpowder coated of any colour (thickness of powder coating not less than 50 micron) aluminium window/ventilator shutters of sliding type without sash , aluminium sections weighting0.55 kg/m including necessary joining cleats, glazing clips, rubber paking , anodised aluminium snap beading screws, rollers, holding and also with locking (arrengements complete all as specified and directed.Note 4.8 mm thick glass or stainless steel wire cloth shall be measured and paid separately. |
| 16 | S&F for aluminium anodised powder coated of any colour(thickness of powder coated not less than 50 micron ) aluminium grill of Make \"Deco drill\" aperature size 50x50mm, thickness 5.5mm and width 5mmfixed with suitable channel all as specified and directed. |
| 17 | S&F 4.8 mm thick sheet glass selected quality and glazing with oil putty / wooden beads in square n.exc 0.50 sqm in each pane complete all as specified and directed |
| 18 | Hacking out old broken glass panes (any thickness size quality or description ) from wooden/steelframe fixed with oil putty or beads area not exc 0.5 Sqm each all as directed. |
| 19 | S&F 3.00mm thicksheet glass, ordinary quality and glazing with oil putty/wooden beadsin squaren.exc 0.5 sqm in each pane. |
| 20 | S&F 4.80 mm thick frosted, obsecured or grounded sheet glass, ordinary quality and glazing with oil putty/wooden beadsin square but not exc 0.5 sqm in each pane. |
| 21 | S&F galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staples and including wooden beads complete all as specified and directed. |
| 22 | S&F in repair galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staples and including wooden beads complete all as specified and directed. |
| 23 | S&F mild steel angles,bars,flats etc as in supports for stiffening of hold fast conforming to Fe-290 Gde-E-165 complete all as specified and directed. |
| 24 | M&L for Providing PCC Type B1 1:2:4 (20mm graded aggregate) in as in hold fast fixing,bed block for filing hollow space of steel chowkhats as specified and directed. |
| 25 | S & F in repairs 100mm long medium weight cold rolled mild steel butt hinges |
| 26 | S&F 100 mm butt hinges, medium weight, cold rolled mild steel and fixed |
| 27 | S & Fin repairs Aluminium anodised barrel tower bolt all as above but 150mm long |
| 28 | S & F in repairs Aluminium anodised barrel tower bolt all as above but 125mm long |
| 29 | S & F Aluminium anodised barrel tower bolt all as above but 150mm long |
| 30 | S & F Aluminium anodised barrel tower bolt all as above but 125mm long |
| 31 | S&F in repairs extruded aluminium alloy handles fabricated types, anodised, each 150mm long |
| 32 | S&F in repairs extruded aluminium alloy handles fabricated types, anodised, each 125mm long |
| 33 | S&F extruded aluminium alloy handles fabricated types, anodised, each 150mm long |
| 34 | S&F extruded aluminium alloy handles fabricated types, anodised, each 125mm long |
| 35 | S&F in repairs aluminium alloy anodized sliding door bolt 300mm long with fixing clips etc complete. |
| 36 | S&F 300mm long Aluminium, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts of extruded section all as specified. |
| 37 | S&F in repairs aluminium anodized hooks and eye 150mmlong. |
| 38 | S &F in repairs Floor door stopper 150 mm of aluminium alloy bodydouble tongue with rubber shoe fixed on door shuttercomplete all as specified and as directed. |
| 39 | S &F Floor door stopper 150 mm of aluminium alloy bodydouble tongue with rubber shoe fixed on door shuttercomplete all as specified and as directed. |
| 40 | S & F in repairs 25 mm stainless steel curtain rod all as specified and as directed. |
| 41 | S & F in repairs decorative Brackets for curtain rails all as specified and as directed. |
| 42 | S & F in repairs Door closer hydraulically regulated of Extruded Aluminium Section, designation No.3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed |
| 43 | S&F in repair aluminium hat pegs solid body 125mm to 175mm long. |
| 44 | S&F in repair brass wardrobe hooks(single) solid body 50mm to 60mm long. |
| 45 | S&F in repairs brass 4- levers Mortice lock, vertical type, size 100 mm |
| 46 | S&F brass 4- levers Mortice lock, vertical type, size 100 mm |
| 47 | S&F in repair 18/19mm thick prelaminated particle board, interior grade, prelaminated both side with decorative choice lamination, fixed with necessary clipsfixed as in cupboard shelves/shutter complete all as specified and directed. |
| 48 | S&F in repairs 125mm Brass handles, cast type, polished bright complete all as specified and directed. |
| 49 | S&f in repair continous (piano) hinges, mild steel, bright finish or eletro galvanised width of flap (when open) 30 mm etc complete all as specified and as directed |
| 50 | S&F in repairs 100 mm Hasp and staple, safety type, aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed. |
| 51 | S&F (in repair) MS helical door spring 150 mm size incl roller and roller platefixed to wooden or steel frames with welding etc complete all as specified and directed. |
| 52 | Dismantling offloor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises including removing of all the debris to a distance n exc 2 km out side the base at the disposal of the contractor. |
| 53 | M&L for coloured vitrified ceremic tiles 10 mm thick (square/rectangular) polished, area of each tiles not exc 0.36 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid overincluding screed bed or bedding layer of mortar 15 mm thick for laying floor tiles in cement mortar 1:6 finished even and rough . |
| 54 | M&L for coloured vitrified ceremic tiles 10 mm thick (square/rectangular) polished, area of each tiles not exc 0.36 Sqm in vertical surface in skirting etc set and jointed :in neat cemetn slurry and pointed in white or coloured cement to match fixed over andincluding 10 mm thick backing coat in CM 1:4 complete all as specified and as directed. |
| 55 | M&L for non skid ceramic colouredtiles 7 to 8 mm thick area of each tiles exceeding 0.11 Sqm but n.exc 0.18 Sqm as in floor, etc and jointed in neat cement slurry over and including cement screed 15 mm thick 1:6. and pointed in white or coloured cement to match . |
| 56 | All as per item above herein but in vertical surfaces such as skirting/dado laid over and including a backing coat of 10mm thick Cement mortar (1:3) |
| 57 | M&L for Coloured glazed ceramic tiles 450X 300X 7mm thick as in dado set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 10 cm thick backing with cm 1:3 . |
| 58 | Supply and fix, as in repair, sinks with drainage board made out of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortor to dwarf wall or including fixing cantiriver lever brackets,waste coupling & pipe and connecting union to pipe overall size 915mmX460mm and bowl size 410mmX330mmX160mm all as specified and directed. Make - Nirali /Anjali/Prayag. |
| 59 | S & F in repairs Vitreous China wash down water closet pan (pedestal pattern), white in colour with fixing bolts and flush pipe, connection to trap and to flushing cistern and all joints, including plastic water closet seat cover white, closedpattern with flat bottom and cover and mild steel CP hinges complete all as specified and directed. |
| 60 | S&F in repair vitreous china squating pan \"Orissa\" patern size 580 x 440mm white with \"P\" or \"S\" trap front or back inlet with integral foot rest (excluding flushing cistern and flush pipe), squating pan including connection to trap and flushing pipe, anit syphonic pipe etc complete incl making good to floor. |
| 61 | S&F in repairs PVC valve less flushing cistern low level 10 litres capacity with syphonic action type with inlet ball valves, float and handle and connections to pipes and fixing of chain and pull (or) lever including brackets and 32mm dia PVC flush pipe of 60cm long complete all as specified. |
| 62 | S&F in repair vitreous china, wash hand basin white flat back of size not less than 550 x 400 mm with and including PVC waste pipe 32 mm bore, CP waste fitting and cutting for and pinning in ends of brackets etc,complete all as specified and directed. |
| 63 | S&F in repairsplastic water closet seat cover white/closed pattern with flat bottom and cover and MS CP or aluminum hinges device all as specified and directed by Engineer-in-Charge, |
| 64 | S&F in repair bib taps concealed type with long shank and cup of fancy type,chromium platedscrewed down high pressure with crutch or butterfly handle screwed for iron pipes of 15mm bore. |
| 65 | S & F Brass 2 in 1 CP mixer formixing hot & cold water screwed down for iron pipe and fixed |
| 66 | S & F in repairs two way bib cock, CP, Fancy type - 15mm dia, |
| 67 | S & F in repairs Health Faucet for 15mm dia with 1.5mlong easy flex tube in Chrome finish and wall look |
| 68 | S&F in repair Angle valves fancy type,chromium plated cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe of 15mm bore. |
| 69 | S&F in repairs stop cock concealed type with long shank and cup of fancy type,chromium plated screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe of 15mm bore. |
| 70 | S&F in repair Brass chromium plated shower rose 125mm size, including shower arm with or without swivel joints,complete all as specified and directed. |
| 71 | Supply & fixing fancy type pillar tap 15mm dia, cast copper alloy with capstan heads, chromium plated screwed down high pressure with or without lettered \"Hot or Cold\" with long screwed shank and fly nut screwed for iron pipe & fixed in repairs. |
| 72 | S&F in repairs32mm waste fittings brass of chromium plated for wash basin etc, with long screwed shanks and fly nut, flange end bedded in red lead cement and others and fixed. |
| 73 | S&F in repair PVC connections 15mm size with PTMT nuts of length 450mm |
| 74 | S&F in repairs PVC waste pipe with 32 mm dia bore with cup headfor WHB/urinal/sink etc all complete. |
| 75 | S & Fin repair PVC (SWR) multiple Floor trap of 75 mm outlet plain with grating including jointing with solvent cement. |
| 76 | S&F in repair 600 mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers. |
| 77 | S&F in repairs sheet glass shelf assembly consisting of 5.5mm thick sheet glass 12cm wide with chromium plated bracket guard and railing 60cm long |
| 78 | S & F in repairs Stainless Steel Tubular towel rail , 20mm dia,60cm long between flanges |
| 79 | Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes etc of tank capacity exceeding 250 litres and not exceeding 500 litres |
| 80 | Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes etc of tank capacity exceeding 500 litres and not exceeding 1000 litres |
| 81 | S&F in repairs Ball valves high pressure of PTMT with epoxy coated Aluminum rod & high-density plastic ball screwed for iron pipe for 20 mm bore dia & fixed.(Minimum weight 210gms) |
| 82 | Ditto all as per above item but 25 mm bore dia & fixed.(Minimum weight 455 gms) |
| 83 | S&Fin repairs PVC soap tray (Make : Prayag cat No 195 ) fixing with screw in the wall as specified. |
| 84 | S & F in repairs Standard aluminium door seal with Nylon brush at lower side to fit at the bottom of door shutter with screws fixed all as specifiedand directed |
| 85 | S&F in repairs 100 mm dia PTMT grating doom(min. weight 25 gms) complete all as specified and directed. |
| 86 | M & Lfor repair adjusting, tightening the hinging device of EWC/ Anglo indian WC seat cover complete including replacement of broken hing in device complete all as specified and as directed |
| 87 | S & F in repairchromium plated cap of any suitable fro bib tap, stop cock, pillar taps, Angle valve fixed with screw to spindleetc complete all as specified and as directed |
| 88 | Petty Repairs to high/low level flushing cistern by adjusting the float valve, leakage of PVC connection,PVC/GI bend replaceing of rubber washers check nuts plugs etc for any type of flushing cistern complete all as specified and as directed. |
| 89 | Taking down cement plaster on brickor concrete surfaces / ceiling, racking out joints hacking for key scrubbing downwith water etc complete all as specified and directed. |
| 90 | M&L for 15 mm thick rendering in CM 1:6 on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cementcomplete all as specified and directed. |
| 91 | M&L for preparation of new plastered wall surfaces and including applying two coats of oil bound distemper overa coat of primer and over wall care putty (1mm thick) to obtain smooth finish completeall as specified and directed. |
| 92 | M & L for Preparation of old plastered or un-plastered surface including brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of white wash on walls complete all as specified and directed. |
| 93 | M & L for Preparation of old plastered or un-plastered surface including brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of white wash on ceiling complete all as specified and directed. |
| 94 | M & L for preparing old distempered surfaces of walls by washing rubbing down and stopping and applying one coat of distemper oil emulsion of any colour all as specified and as directed |
| 95 | M&L forone subsequent coatof distemper of on above item |
| 96 | M&L for Applying two coats of Oil bound distemper to wall over a coat of primer over a wall care putty(1 mm thick)including complete removal of existing treatment all as specified and directed. |
| 97 | M&L for complete removal of existing treatment on wall, chajjas & cantilever portionand making good theundulated surfaces of wall, chajjas and cantilever portion by filling of putty including rubbing, scraping & grinding make the wall surface smooth & applying two coats of weather proof acrylic emulsion paint exterior grade (100% acrylic) of silver steak shade of asian paint over a coat of primer on prepared external surfaces of walls of any description over 10 cm width/girth etc on column/pillars , RCC chajja and facia approved colour all as specified. |
| 98 | Preparationof old painted surfaces of wood and wood based surfaces of any description, over 10cm in width or girth and apply one coat of synthetic enamel paint complete all as specified and directed. |
| 99 | Preparation of oldsteel surface of any description, over 10cm in width or girth not other wise described and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 100 | M&L for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 101 | M&L for preparation of new wooden surfaces of any description, not otherwise described over 10 cm width or girth and including applyingtwo coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 102 | Taking down carefully copper/aluminium point wiring including sunken MS boxes (light, fans, socket or power) complete, (fittings such as switches, ceiling roses,call bell, pendants, regulators, socket etc by unscrewing from board carefully and making good disturbed surfaces of walls, floors etc complete all as specified & directed . |
| 103 | M&L for point wiring with PVC insulated unsheathed stranded FRLS copper conductor cable of size 1.5 Sqmm, with PVC insulated unsheathed stranded FRLS copper conductor cable of size 1.5 Sqmm for earth continuity wire, to be drawn in and including PVC conduit heavy duty with concealed wiring, MS sheet metal switch/Terminal box 1.2 mm thick and hylum switch board cover 3.0 mm thickswitch board and brass screws with cap washers for one light/Fan point controlled by one single way switch including all necessarywall cutting and making good disturbed surface allas directed and specified.(Make of wire: .(Make of wire: Finolex/Polycab/Plaza Make of PVC Conduit :-Plaza/Prestoplast/Precision) |
| 104 | All as per here and before item No-103 above but for one light point controlled by one two way switch |
| 105 | All as per item No. 103 above but for call bellpoint. |
| 106 | All as per item No. 103 above but one 3 pin socket outlet 5 Amps on same board. |
| 107 | All as per item No. 103 above but one 3 pin socket outlet 5 Amps but independent board with cable 1.5 Sqmm two run & 1.5 Sqmm one run of earth continuty. |
| 108 | All as per item No.103 here in before but for 5/15 Amps point on independent board with two runs of 2.5 Sqmm FRLS grade PVC insulated unsheathed stranded Copper conductorand 2.5 Sqmm, FRLS grade PVC insulated, unsheathed, stranded copper conductor as earth wire. |
| 109 | M&L Point wiring for one light point or one fan point controlled by one switchwith two runs of FRLS grade PVC insulated unsheathed stranded copper conductor of size 1.5 Sqmm (phase & neutral) and one run of 1.5 Sqmm FRLS grade PVC insulated unsheathed strandedcopper conductor asfor earth continuity wire to be drawn in and including PVC casing & caping ( medium grade) not less than 25 mm width with fittings & fixtures includingMS sheet metal switch / terminal box 1.22 mm thick upto(200x300)mm size duly covered with backelite sheet cover 3.00mm thick and continutiy conductor shall be connected to common earth and earth dolly and makinggood disturbed surface to walls complete all as specified & directed .(Make of wire: .(Make of wire: Finolex/Polycab/PlazaMake of PVC Casing-N- Caping :-Plaza/Prestoplast/Precision) |
| 110 | All as per above item but for call bellpoint. |
| 111 | All as per above item but one 3 pin socket outlet 5 Amps but independent board with cable 1.5 Sqmm two run & 1.5 Sqmm one run of earth continuty. |
| 112 | All as per above itemhere in before but for 5/15 Amps point on independent board with two runs of 2.5 Sqmm FRLS grade PVC insulated unsheathed stranded Copper conductorand 2.5 Sqmm, FRLS grade PVC insulated, unsheathed, stranded copper conductor as earth wire. |
| 113 | S&F in repairs Sub main wiring usingtwo runs of FR grade PVC insulated ,unsheathed ,stranded, copper conductor cable of size 4.0 Sqmm and one run of 4.0 Sqmm FR grade PVC insulated, unsheathed, stranded, single core, copper wire to be drawn in and including 25 mm size PVC Conduit (medium grade) in Concealed wiring of suitable sizeand all as specified.Note :Two runs of 4.0 Sqmm copper wire,one run of 4.0 Sqmm wire & one run PVC Conduit shall be measured as one unit. |
| 114 | S&F in repairs Sub main wiring usingtwo runs of FR grade PVC insulated ,unsheathed ,stranded, copper conductor cable of size6.0 Sqmm and one run of 6.0 Sqmmgrade PVC insulated, unsheathed, stranded, single core, copper wire to be drawn in and including 25 mm size PVC Conduit (medium grade) in Concealed wiring of suitable size and all as specified.Note :Two runs of 6.0 Sqmm copper wire,one run of 6.0 Sqmm wire & one run PVC Conduit shall be measured as one unit. |
| 115 | S&F in replacement Switch piano, flush type, single pole, one way 5 Amps, 240V complete all as directed by Engineer-in-Charge. |
| 116 | S&F Switch piano, flush type, two pole, two way 5 Amps, 240V complete all as directed by Engineer-in-Charge. |
| 117 | S&F in replacement Bell push Switch,flush type, single pole, one way 5 Amps, 240V complete all as directed by Engineer-in-Charge. |
| 118 | S&F in replacement Call Bell ,Ding-Dong ,single pole, AC, 230 Volts complete all as directed by Engineer-in-Charge. |
| 119 | S&Fin replacement Switch socket combination 2 in 1, 5 pin, 5 Amps flush type 240 Volt . |
| 120 | S&F in replacement Switch socket combination 5/15 Amps flush type,6 pin,5 in 1. |
| 121 | S&F in replacement Ceiling rose,3 terminalPVC/poly carbonate isolated body. |
| 122 | Supply and fixing in replacement of Step type electronic Fanregulator socket type on the existing phonolic laminated sheet etc as required as existing type and size ( |
| 123 | S&Fin repairs MCB DB made of sheet steel phosphatised, powder painteddouble door with bus bar, neutral link, earth bar and din rail of SPN 4 way, 240 Voltsfixed in wall,making good disturbed surfaces,complete all as specified. (Make/Model:Cat No:DBSPN006DD of L&T or equavalent Standard/Legrand/HPL//Havells) |
| 124 | S&F in repairsMCB DB made of sheet steel phosphatised, powder painteddouble door with bus bar, neutral link, earth bar and din rail of SPN 6 way, 240 Voltsfixed in wall,making good disturbed surfaces,complete all as specified. (Make/Model:Cat No:DBSPN006DD of L&T or equavalent Standard/Legrand/HPL//Havells) |
| 125 | S&F in repairsMCB DB made of sheet steel phosphatised, powder painted with bus bar, neutral link, earth bar and din rail of SPN 8 way, 240 Volts double door fixed in wall , making good disturbed surfaces,complete all as specified.(Make : L&T/Legrend/Havells |
| 126 | S&F in repairs MCB DB made of sheet steel phosphatised, powder painted,double door with bus bar, neutral link, earth bar and din rail of TPN 4 way, 415 Voltsfixed in wall, making good disturbed surfaces, complete all as specified (Make : L&T/Legrend/Havells) |
| 127 | S&Fin replacement Isolator, FP, 415 Volt 63 A TPN, of breaking capacity 35KA (Make L&T,Cat No.BF406300 or Standard/ Legrand/ HPL/ Havells) |
| 128 | S&F in replacement MCB, SPN. 6-32 Amps rating 240, volt, \"C\" series, 10 kA (Make L&T,Cat No.BB20320D or Standard/Legrand/HPL//Havells) |
| 129 | S&F MCBin replacement SP, 6-32 Amps, 240 volt, \"C\" Series, 10 kA ( Make L&T,Cat No.BB10320D or Standard/Legrand/HPL//Havells) |
| 130 | Supply and fixing in replacement 1x10 watt ( 2ft ) LED Batten indoor decorative type robust and high performance giare free extruded Batten with milky white diffuser complete with all accessories internallypre-wired and including connecting up with twin core twisted flexible copper conductor cable includingtaking down old light fittings complete all as specified and directed. ( Make /Model No :-CCS-103-10-65-SL-DP-NWH(TRIMLINE NEU) of Crompton or equivalent ofPhillips/Havells/Wipro ) |
| 131 | Supply and fixing in replacement High-quality design LED Tube lightfittings in extruded aluminium housing with high quality PC diffuser 1x20 wattwithenhances safety and relible ,robust housing structurewith decorative end caps complete with all accessories internallypre-wired and including connecting up with twin core twisted flexible copper conductor cable includingtaking down old light fittings complete all as specified and directed. ( Make /Model No :- CCS-100-20-65-HL2-DP-NWH(BRIGHT LINEA) of Crompton or equivalent ofPhillips/Havells/ Wipro ) |
| 132 | Supply and fix in replacement LED 4ft T8 type 18w 2100 Lumen LED Tube with Polycarbonate Body with Aluminium heat sink insarted for better heat efficiency and Mechanical strength with effciency 117 lumen/watt, with CCT 6500K, CRI 80, PF > 0.9, THD <15%, Internal driver SPD 3 KVBajaj Cat Part No BLRB18W Make Philips Cat part No : Mas LED Tube 1200mm 18W865 T8 I – 2100lm or equvalent to CG/ Orient |
| 133 | Supply and fix in replacement of 7 to10 Watt LEDRobust & reliable LED bulkhead with IP65 protection & IK08 impact resistance suitable for surface and wall mounting applicationscomplete all as specified and as directed.Make-Philips Cat No- WT140W LED7S CW PUS S1 PC or equvalent to Crompton/ Orient |
| 134 | Supply & fixing in repair Building security light fitting,new compact designed IP 66, Aluminium PDC housing with toughen glass cover high power LED street light/Building Security light of capacity 25 watt.including provn of necessary connection complete.(Make/ Model:- Crompton(ASTRA NEO), Cat No . LSTS-25-CDL-M or equivalent make of Phillips/Havells/ Wipro) |
| 135 | Supply and fixing in repair of GI pipe Bracket of 40 mm dia Medium grade pipe bend to shape of approx length 1.5 Mtr including 2 no. MS Clamp of flat iron size 40x6 mm complete with nut, bolt, washers all as specified and directed. (Make of GI Pipe - Jindal/Prakash/Tata) |
| 136 | Supply and fixing in repair sheet metal encloser box including Plug and socket with 20 Amps MCB (SP) with taking down old U/S existingsheetmetal enclosure. ( Make L&T/Legrand /Standard). |
| 137 | Disconnecting electrical wire from ceiling rose, taking down ceiling fan of any type/size and make, removing substances from bearing, bush by using kerosene oil, carrying out fresh lubrication using grease and to make the ceiling fan noise free for smooth functioning (including replacement of worn-out / unserviceable like capacitor, connector, canopy, bearing, down road, PVC cable etc) assembling the repaired ceiling fan including painting with one coat of synthetic enamel paint of existing colour code including writingMES No with black synthetic enamel paint completeincludingtestinghanging the ceiling fan as its own position, connection with point wiringcomplete all as directed by Engineer-in-Charge. (NOTE : Spare parts to be replaced shall be measured and paidseparately., as supply only items was labour element in voles for replacement of spare parts shall deemed to be included in the unit rate quoted by the tenderer). |
| 138 | All as per above item but for exhaust fan 300 mm/380mm sweep. |
| 139 | All as perabove itembut for exhaust fan 450 mm sweep. |
| 140 | Rewinding of the motor of AC ceiling Fan of any make and size 1200 / 1400 mm sweep with super enamelled copper wire of existing gauge to obtain the specified and satisfactory RPM as per manufacturers specification, including replacement of all insulation materials, varnishing heating, drying, assembling of stator & rotor etc including including painting with one coat of synthetic enamel paint of existing colour code including writingMES No with black synthetic enamel paint and testing complete all as directed by Engineer-in-Charge. |
| 141 | All as per above item but for exhaust fan of any make / type and size 300 mm/450mm sweep. |
| 142 | Supply only shaft for ceiling fan of size 1200mm. |
| 143 | Supply only ball bearing of any size and type suitable for any type / make / size of ceiling fan . |
| 144 | All as per above item but for exhaust fan of any type/make and size (300 /450 mm sweep) . |
| 145 | Supply only capacitor 230 Volts AC 50 HZ and rated capacity 2.5 MFD for ceiling fan. |
| 146 | Supply only capacitor 230V AC 50 HZ and rated capacity 3.15 MFD for exhaust fan. |
| 147 | S&F PVC insulated, sheathed twin twisted stranded copper conductor flexible cable of size 0.75 Sqmm for ceiling fan. |
| 148 | S&F gun metal bush of suitable size for exhaust fan of any type / size as per existing type. |
| 149 | S&F in repairslouvers shutter made of MS sheet metal 1.2 mm thick for round base and 0.8mm thick for flaps confirming of mounting edges frames made of MS Flat of size 25mmx3mm including heavy duty rust proof passivated bolts, of size 50mm long 8mm dia to be fixed on wall after drilling and duly painted by two coats of synthetic enamelled paint (spray painting) over a coat of primer for exhaust fans up to size 300 - 450 mm sweep. |
| 150 | S&F in repairs of PVC plug top of 5 Amps, 3 pin,230 volts complete all as directed. (Make:Anchor/Cona/Roma) |
| 151 | S&F in repairs of PVC plug top of 15 Amps, 3 pin,230 volts complete all as directed. (Make:Anchor/Cona/Roma) |
| 152 | Supply and Replacement of Incoming cable with 3-core,PVC Stranded copper conductor of sizes 1.5 sq.mm with taking down of old unserviceable incoming cables all as specified and directed. |
| 153 | Taking out unserviceable geyser of any make and capacity for necessary repair/replacement including refixing the same in original position after repair including one coat of white synthetic enamel paint including preparation of old surface complete all as specified. (NOTE : spare parts shall be paid separately under supply only rate) |
| 154 | Supply only PVC connection pipes inner wiremesh type 15mm size of length 450mm hot and cold with both ended brass flare nuts for geyser connection. (Make:Prayag/Marc/Jaquar) |
| 155 | Supply onlythermostat with auto cut for setting temperature 0- 90C. |
| 156 | Supply onlyindicator lamp red/green colour with transparent covers per existing size & shape. |
| 157 | Supply onlygun metal safety valve all as per existing size and shape. |
| 158 | Supply onlyheating element thread/push type as per existing size & shape of capacity 1.5 KW complete all as specified anddirected including taking out of unserviceable one . |
| 159 | All as per above item but of capacity 2.0 KW. |
