|
| 1 | Demolition of lime/cement concrete provided as mass concrete in sunken complete all as specified and directed by Engr-in-Charge. |
| 2 | M&L for cement concrete 1:5:10 type E2 using 40mm graded stone coarse aggregate in sunken floor complete all as specified and directed by Engr-in-Charge. |
| 3 | Treatment of sunken floor slab comprises of the following specifications and all as specified (i) M&L for cleaning of the sunken /lowered portion of the RCC slab surface (including vertical total depth plus skirting height) of floors by wire brush, chiesel out any mortar sticking to the surface and brooming / washing completely. 40 mm avg thk pcc 1:2:4 type B-0 using 12.5 mm graded aggregate as in padding conc to achieve proper slope including 50 mm dia 350 mm long medium grade GI pipe spouts with wire guage on inside mouth to be fixed (ii) Rendering of uneven surfaces with 6 mm thick CM 1:4 mixed with and incl integral WPC @3% of weight of cement consumed fill it with water and check dampness and seepage where dampness and seepage noticed nozzles shall be fixed and grouting carried out. (iii) All junctions points of side walls where CI/GI pipes are passing through shall be sealed with epoxy putty(iv) After drying puttywash the slab and sides of sunken portion with water and make it clean and clear(v) M&L for applying two coat of polymer modified cementious water proofing coating as per manufactures instructions to bottom and vertical sides up to finished flooor level +100 mm height. The thickness of two layer shall be 1 mm. When the second layer is still sticky , coarse sand spry shall be carried out or vertical and bottom surface of the sunken portion all as specified and directed.(vi) Plaster the bottom and sides up to bottom of the skirting with minimum 20 mm thk cm 1:4 mixed with and including integral WPC 3 % of cement consumes as per manufacures specification including rounding of corners and junctions sloping towards spoutNote:Test the water proofed area (ponding test) by filling water for atleast 72 hours and tested for leakage seepage and to the entire satisfaction of GE . Test shall be done in presence ofreps of PMG and record for each sunken slab shall be maintained. the treatment shall be carried out by authorised applicators of chemicals.(vii) All pipes laid in sunken portion shall be covered with 50 mm thick PCC 1:3:6 all around after painting with anticorrossive black japan paint.(viii) Height up to and including 14th floor. |
| 4 | M & L in repairs PVC (SWR) floor trap 100/75mm with CP grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) including jointing to waste pipe with with solvent glue /cement complete all as specified and directed by Engr-in-Charge. |
| 5 | Taking down cement plaster of any discription including racking out joints hacking for key scrubbing down with water complete all as specified and directed by Engr-in-Charge. |
| 6 | Providing and applying fair finish 15mm thick plasterwith readymix prepacked proportioned dry mix mortar fair faces of brick wall or concrete surfaces additives, on internal surfaces including transporting of material, mixing, curing, etc.complete as per direction of Engr-in-charge.MAKE: M/s ACC Accoplast/ M/s Ultratech Readiplast/ M/s Magicrete Magicplast/ CK Birla\"s AEROCEN |
| 7 | Providing and applying fair finish 10mm thick plasterwith readymix prepacked proportioned dry mix mortar fair faces of brick wall or concrete surfaces additives, on ceiling including transporting of material, mixing, curing, etc.complete as per direction of Engr-in-charge.MAKE: M/s ACC Accoplast/ M/s Ultratech Readiplast/ M/s Magicrete Magicplast/ CK Birla\"s AEROCEN |
| 8 | M & L for preparing newly plastered surfaces of wall and apply two coats of distemper oil emulsionwhite or tinted over and incl 1mm thick in two layer wall care putty on walls complete all as specified and directed by Engr-in-Charge. |
| 9 | M & L for preparation of newly plastered surface of ceiling and applying three coats of white wash complete all as specified and directed by Engr-in-Charge. |
| 10 | M & L for preparation of old wall surface and applying one coat of distemper oil emulsion white or tinted complete all as specified and directed by Engr-in-Charge. |
| 11 | M & L for preparation of old surfaces of ceiling and applying one coat of distemper oil emulsion white or tinted complete all as specified and directed by Engr-in-Charge. |
| 12 | M & L for one coat synthetic enamel paint on old wooden surface of any description over 10 cm width or girth not otherwise described including prepration of surface complete as specified and as directed by Engr-in-Charge. |
| 13 | M & L for one coat synthetic enamel paint on old steel surface of any description over 10 cm width or girth not otherwise described including prepration of surface complete as specified and as directed by Engr-in-Charge. |
| 14 | Dismantling floor, hearth, or wall tiling incl cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engr-in-Charge. |
| 15 | M & L non skid colouredceramic tiles exc 0.08 to n exc 0.18 Sqm 6 to 7mm in floors set and jonted in epoxy mortar and pointed in coloured / white cement to match the colour of tiles over and including 20 mm thick cement mortar screedbedin CM 1:6 complete all as specified and directed by Enginner-in-Charge. |
| 16 | M & L for coloured glazed ceramic tiles size 300x200x6-7mm on vertical surfaces set and jointed in neat cement slurry and pointed in white or coloured cement to match of the shade over and incl 10mm thick backing coat in C:M 1:4 complete all as specified and directed by Engr-in-Charge. |
| 17 | M&L for glazed ceramic coloured tiles 300 x 450 x 7mm thick as in dado (vertical surfaces) set and jointed with neat cement slurry and pointed with white cement,over and including 10mm thick rendering in CM 1:4 as backing coat complete all as specified and directed by Enginner-in-Charge. |
| 18 | Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc complete all as specified and directed by Enginner-in-Charge. |
| 19 | M&L for Brushing neat cement slurry with 3.0kg of cement per sq. metre complete all as specified and directed by Enginner-in-Charge. |
| 20 | M&L Ceramic tiles glossy finish 7 to 8 mm thick (square / rectangular) area of eachtile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over andincluding bedding layer of mortar 20mm thick in CM 1:6 for laying floor finishes complete all as specified and directed by Engr-in-Charge. |
| 21 | Ditto all as per item No 20 above but as in skirting over & incl backing layer of 10mm thickin CM 1:4 complete all as specified and directed by Engr-in-Charge. |
| 22 | S & F in repair stainless steel dia of wire and average width of aperture 1.4 mm, cut to required size and fixed to wooden doors / windows shutter with wooden beading (any size) and fixed aluminium window / vent with aluminium wire staples complete all as specified and directed by Engr-in-Charge. |
| 23 | S&F in repair sink with drain board, made of stainless steel 1mm thick kitchen or laboratry with plugs, washers and wastes coupling fitting, including beading in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed by Engr-in-Charge. |
| 24 | S & F in repair PVC valveless, syphonic action type, flushing cristern, low level, white, 10 ltr capacity with inlet, ball valve, float and handle including brackets and flush pipe complete all as specified and directed by Engr-in-Charge. |
| 25 | M & L in repair vitreous china squatting pan Orissa pattern of size 580 x 440 mm white with back inlet and integral footrestand anti syphonnage pipe including\"P\" or \"S\" trap and provn of lime concrete ccomplete all as specified and directed by Engr-in-Charge. |
| 26 | M & L in repair vitreous china wash down water closet padestal pattern white (excluding fixing bolts, flushing cistren and flush pipe) with\"P\" or \"S\" trap ccomplete all as specified and directed by Engr-in-Charge. |
| 27 | M & L in repair vitreous china wash down water closet semi padestal pattern (Anglo-Indian type) white (excluding fixing bolts, flushing cistren and flush pipe) with\"P\" or \"S\" trap ccomplete all as specified and directed by Engr-in-Charge. |
| 28 | S & F in reapir Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminisied hinges devices complete all as specified and directed by Engr-in-Charge. |
| 29 | S & F in repair chromium plated telephonic health faucet shower with flexible tube of stainless steel, 1.5 Mtr long & hook, multi flow 15mm dia for iron pipe or for brass ferrule complete all as specified and directed by Engr-in-Charge. |
| 30 | S & F in repair vitreous china ware wash hand basin white, flat back, size 550 x 400 mm size(flat back or angle back type) including cutting for and pinning ends of brackets or erecting stand complete all as specified and directed by Engr-in-Charge. |
| 31 | S & F 32 mm dia Waste fittings, brass chromium plated suitable for glazed ware sinks, wash basins etc with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed by Engr-in-Charge. |
| 32 | S & F in repair 32 mm dia Waste fittings, brass chromium plated suitable for glazed ware sinks, wash basins etc with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed by Engr-in-Charge. |
| 33 | S & F in repair 100 mm dia PVC Waste fittings, suitable for steel kitchen sinks with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed by Engr-in-Charge. |
| 34 | S & F HDPE PVC pipes of pressure rating 6 kgf/Sq.cm of 40/50 mm bore fixed complete to walls, ceiling or in floorsincluding bend and sockets etc; any type of pipe complete all as specified and directed by Engr-in-Charge. |
| 35 | S & F PVC waste pipe 32/40 mm bore and 600 to 800mm long fixed with wash basin, kitchen sink and urinal etc complete all as specified and directed by Engr-in-Charge. |
| 36 | S&F in repair PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and directed by Engr-in-Charge. |
| 37 | S & F in repair pillar tap 15mm bore, cast copper alloy fancy type chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed by Engr-in-Charge. |
| 38 | Taking up or down steel tubing and connections, including cleaning for refixing or removal to store ccomplete all as specified and directed by Engr-in-Charge. |
| 39 | S & F 15mm bore GI Tubing medium gradewith all fittings, laid in trenches,wall or roof complete all as specified and directed by Engr-in-Charge. |
| 40 | Refixing of 15mm bore GI Tubing medium grade with all fittings, laid in trenches,wall or roof complete all as specified and directed by Engr-in-Charge. |
| 41 | S & F in repair Stop valves, 15mm dia cast copper alloy fancy type, screwed down, high pressure, with crutch or butterfly handle,screwed both ends for iron pipe or for uninons and fixed complete all as specified and directed by Engr-in-Charge. |
| 42 | S & F in repair chromium plated tubular towel rail 20mm dia, D type, 60cm long between flanges complete all as specified and directed by Engr-in-Charge. |
| 43 | S & F600 mm x 450 mm bevelled edge mirror of selected quality glass decorative type,mounted on 6 mm thick BWP grade plywood, with glass self fixed to wooden plugs with CP brass screws and cup washers complete all as specified and directed by Engr-in-Charge. |
| 44 | Only repair of flushing cistern of any type of 10 ltr capacity incl necessary ball valve, float and handle including brackets and flush pipe complete all as specified and directed by Engr-in-Charge. |
| 45 | S & F for in repair 25mm dia Stainless Steel curtain rod with and incl suitable bracket complete all as specified and directed by Engr-in-Charge. |
| 46 | Easing ofwooden door/window (complete for one No of door or window of any size and having any number of shutter) for easy opening /closing tightning, changing/adjustment of possion of fittings complete all as sepcified and directed by Engr-in-Charge. |
| 47 | Repair ofaluminium window/door (complete for one No of window or door of any size and having any number of shutter) for easy opening /closing tightning, changing/adjustment of possion of rollar and other fittings complete all as sepcified and directed by Engr-in-Charge. |
| 48 | S&F in repair 125mm size hasp and staple safety type, aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed by Engr-in-Charge. |
| 49 | S&F in repair 100mm size stainless steel medium weight butt hinges complete all as specified and directed by Engr-in-Charge. |
| 50 | S&F in repair 125 mm extruded aluminium handles, fabricated type anodised fixed complete all as specified and directed by Engr-in-Charge. |
| 51 | S&F in repairs 150mm aluminium anodised barrel tower bolts of extruded section complete all as specified and directed by Engr-in-Charge. |
| 52 | S&F in repairs 250 mm long aluminium alloy, anodised sliding door bolt with hasp and staple ( bolt type ) and fixing bolt and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed by Engr-in-Charge. |
| 53 | S&F in repairs two legged 90 mm overall length floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring, fixed in floor all complete as specified and as directed by Engr-in-Charge. |
| 54 | Dismantling of stone slabs, bedded and pointed in any mortar of any description or thickness in floors, approns, skirting, jamb/cill etc including removal of debries out of defence land complete all as specified and directed. |
| 55 | M & L machine cut cudappah stone 20-25 mm thick over base, laid and jonted with grey cement slurry mixed with pigment to match the shade of the stone including rubbing, polishing and necessary hole for gas pipe complete all as specified and directed by Engr-in-Charge. |
| 56 | M&L machine cut granite (of any type) slab 18 to 20mm thick as in like kitchen plateform etc, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone over 10 mm thick in CM 1:6 including grinding, polishing and making necessary hole for gas pipe and necessary bull nosing complete all as specified and directed. |
| 57 | M & L for machine cut Kota stone ( greenish colour,mirror polished) slab flooring 18 to 20mm thick over cement screed bed laid and jointed with grey cement slurry mixed with pigment to match the shade of slab incl rubbing and mirror polishing, over & incl 15mm thick screed bed in CM 1:6 complete all as specified and directed by Engr-in-Charge. |
| 58 | Taking down chowkats with shutter (without taking off shutter from the frame) not exc 1.5 sqm each complete all as specified and directed by Engr-in-Charge. |
| 59 | S & F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, fixing in opening complete all as specified and directed by Engr-in-Charge. |
| 60 | S & F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. frame shall be covered with heat moulded plain colour PVC \"C\" channel having a PVC sheet strip of 2omm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of fplain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with sovent cement, suppling & fixing in the frame complete all as specified and directed by Engr-in-Charge. |
| 61 | S&F in repair 3mm thick plain/ pin headed type sheet glass ordinary quality and glazing fitted in wooden/ alu window n.exc 0.5 sqm in each pane incl beading for securing glass complete all as specified and directed by Engr-in-Charge. |
| 62 | S & F 100mm size stainless steel medium weight butt hinges complete all as specified and directed by Engr-in-Charge. |
| 63 | S&F 125 mm extruded aluminium handles, fabricated type anodised complete all as specified and directed by Engr-in-Charge. |
| 64 | S&F 150mm aluminium anodised barrel tower bolts of extruded section complete all as specified and directed by Engr-in-Charge. |
| 65 | S&F for in repair 18/19mm thick prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work incl 18/19mm wide and 6mm thick external teak wood lipping fixed with nails and glue to board as in cup board shutter, CB shelves and kitchen cabinate etc like work complete all as specified and directed by Engr-in-Charge. |
| 66 | S&F Continuous (piano) hinges, mild steel, bright finish or electro galvanised, width of flaps when open in 30mm complete all as specified and directed by Engr-in-Charge. |
| 67 | S&F magnatic door catches including letting in complete all as specified and directed by Engr-in-Charge. |
| 68 | S&F 125mm size hasp and staple safety type, aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed by Engr-in-Charge. |
| 69 | Note:Works shall be carried out upto G+05 storey bldg. Rate incl removal of all debries outside of MD land and necessary scaffolding & Safety Net Cloth at places. |
