Tender For Construction Of Boundary Wall At Paur Fps (Phase-I)
Tender Value
3.41 Lakhs
Estimated cost
Bid Submission
27 Jul 2024
0 days left
EMD
6959
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
chakulia → West Bengal
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Construction Of Boundary Wall At Paur Fps (Phase-I)
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 m. as directed. The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water as required complete. Depth of excavation not exceeding 1500 mm. |
| 2 | Earth work in filling in foundation trenches or plinth with good earth, in layers not exceeding 150 mm. including watering and ramming etc. layer by layer complete. (Payment to be made on the basis of measurement of finished quantity of work) |
| 3 | a) With earth obtained from excavation of foundation. |
| 4 | b) With carried earth arranged by the contractor within a radius of 1 km. including cost of carried earth. |
| 5 | Supplying and laying Polythene Sheet (150gm / sq.m.) over damp proof course or below flooring or roof terracing or in foundation or in foundation trenches. |
| 6 | Cement concrete with graded stone ballast (40 mm size excluding shuttering)In ground floor(A) [Pakur Variety]6 : 3 : 1proportion. |
| 7 | Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering andReinforcement if any, in ground floor as per relevant IS codes. River Bazree in ground floor. |
| 8 | Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction. For works in foundation and upto roof of ground floor/upto 4m Tor Steel Rods / HYSD / Fe 415 / Fe 500 / Fe 500D JSW/JSPL/SHYAM/SRMB/BMASL/ELECROSTEEL/SSL |
| 9 | Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor). |
| 10 | a) 25 mm to 30 mm shuttering without staging in foundation |
| 11 | b) 25 mm to 30 mm thick wooden shuttering as per decision & direction of Engineer-In-Charge. |
| 12 | 125 mm. thick brick work with 1st class bricks in cement mortar( 1 : 4 )in ground floor. |
| 13 | Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, Scaffolding/staging where necessary (Ground floor). [Excluding cost of chipping over concrete surface] |
| 14 | a) With 1:4 cement mortar. 10mm.thick plaster |
| 15 | b)With 1:6 cement mortar. 15mm.thick plaster |
| 16 | c)With 1:6 cement mortar. 20mm.thick plaster |
| 17 | Neat cement punning about 1.5mm thick in wall, dado, window sill, floor etc.NOTE:Cement 0.152 cu.m per100 sq.m. |
| 18 | M.S.or W.I. Ornamental grill of approved design joints continuously welded with M.S, W.I. Flats and bars of windows, railing etc. fitted and fixed with necessary screws and lugs in ground floor. Grill weighting above 16kg./Sqm. The weight of grill per sq.m. will be determined by taking the physical weight of fabricated grill and dividing the same by covered area of the same. No shop priming will be allowed to facilitate inspection of workmanship. Weight of grill is to be taken after final grinding and finishing the weld. Extra for work in grill gate. For hanging and locking arrangements including supply of materials and labour complete. (15% extra over the corresponding item of grill ) For supplying fitting and fixing bottom rollers including alllabour complete. (5% extra over the corresponding item of grill ) |
| 19 | Applying decorative cement based paint of approved quality after preparing the surface including scraping the same thoroughly (plastered or concrete surface) as per manufacturer\"s specification. In ground floor. Two coats. |
| 20 | Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. |
| 21 | Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary. On Steel or oyher metal Surface. with super gloss ( hi-gloss ) Two coats (with any shade except white) |
| 22 | Add GST @18% |
| 23 | Add CESS @1% |
AI Tender Summary
Tender Timeline
Jul 20, 2024
11:30 IST
Tender Published
Tender notice published.
CompletedJul 27, 2024
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJul 30, 2024
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender