Internal And External Electrification At Various Tube Wells At Bankner And Lampur Village In Ac 01 Re Invite
Tender Value
Ref. Documents
Estimated cost
Bid Submission
27 Jul 2024
0 days left
EMD
6400
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Delhi → Delhi
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Internal And External Electrification At Various Tube Wells At Bankner And Lampur Village In Ac 01 Re Invite
BOQ
| Sl. No. | Item Description |
| 1 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. SOR 31.1.3 Name of site:- 1. Bankner T/Well No.12. Bankner T/Well No.23. Bankner T/Well No.34. Bankner T/Well No.4 New5. Bankner T/Well No.4 Old6. Bankner T/Well No.57. Bankner T/Well No.78. Bankner T/Well No.89. Lampur T/Well |
| 2 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required. SOR31.31 |
| 3 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 A & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required. SOR31.32 |
| 4 | Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit along with 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required. SOR31.12 |
| 5 | Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.SOR31.26 |
| 6 | Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. SOR31.25 |
| 7 | Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required. SOR31.44 |
| 8 | Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube/lamp etc. directly on ceiling/ wall, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required. SOR 31.41 |
| 9 | Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire. Make : - Havells / Gloster / Grandley / Approved By DJB SOR 31.14.2 |
| 10 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required, Single pole, make L&T / Havells / C&S / Approved by DJB SOR 32.10.1 |
| 11 | Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A, tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer) as required. (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.) 4 way (2+6), Double door. SOR 32.3.1 |
| 12 | Supplying and fixing following rating, double pole, 240 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required 40 A, L&T / Havells / C&S / Approved by DJB SOR 32.12.1 |
| 13 | Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 meter long etc. with charcoal/ coke and salt as required.SOR 35.1.4 |
| 14 | S/o. Decorative ultra slim square profile LED lighting fixture with extrudedpolycarbonate, environmental friendly, energy efficient ready to use pack. Lamp make: Havells/ Crompton/ Bajaj/ Philips Type Order18 Watt SOR 19.1.1 |
| 15 | S/o ceiling fan, 1200 mm sweep make: Havells / Crompton SOR 20.1.1 |
| 16 | New generation energy saving and environmental friendly long life LED street light made up of pressure die cast aluminum housing with high efficient LED as lighting source and PC cover having TOP Opening separate driver compartment with IP66 protection and impact resistance of IK07.. 70/72 watt Make: Bajaj / Havells / Philips / Approved by DJBSOR 19.10.6 |
AI Tender Summary
Tender Timeline
Jul 20, 2024
11:30 IST
Tender Published
Tender notice published.
CompletedJul 27, 2024
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJul 27, 2024
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender