Tender For Road Protection Work On Daurala Barnawa Other District Road, 1 Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes. Rates are inclusive of all taxes, royalty,etc. all T&P/machine material and labour required for proper completion of work (Excluding GST) As per SI.No. 7 2 Supply, fixing and hoisting of 6.00-7.00 m. span Cantilever Structure in position with one vertical post of 6.00 M. clear height from the top of R.C.C. foundation made of 300 mm. dia pipe welded with 10 mm thick MS plate at bottom supported with 10 mm thick MS plate stiffners & two nos. 8 mm thick MS plates at top welded with structure of 40 mm NB (M) pipe comprising of horizontal, vertical & bracing pipe of 32 mm NB (M) as per structural design requirements & approved drawing with vertical & lateral clearance given in clause 802.2 & 802.3 including one coat of primer and two coats of synthetic enamel paint on the whole structure & installed as per clause 802.7 over a designed support system made up of concrete including excavation, lean concrete 1:4:8 cement, coarse sand and approved 20 mm grit and R.C.C. 1:2:4 with cement, coarse sand and approved 20 mm grit complete for fixing the complete structure in position as per direction of E/I charge. With 7 years warranty. Rates include design, fabrication, supply, transportation and erection of the signage structure inclusive of all taxes, royalty,etc. all T&P/machine material and labour required for proper completion of the work (Excluding GST) As per SI.No 8 3 Retro Reflective Signs (Type-IV Sheet) for both sideProviding and fixing retro-reflective signboards comprising of customised modular PU Epoxy Coated MS angle iron frame work, aluminum sheetas base board. micro prismatic retro-reflective sheet and electro cut colored overlay film/latex printing. The horizontal and vertical members including inclined outer members of the MS frame module shall be made of pair MS angle iron. No panel size shall be more than one sqm and each panel shall be braced diagonally (one way only) with MS angle. The MS frame module shall have length not more than 3 mtr. The aluminum sheet shall have a thickness of 4mm with 0.5 mm thick skin of aluminum on both sides. The aluminium sheet shall be fixed on the MS frame with pop riveting or with self taping SS screws 5mm dia spaced not more than 300mm centre to centre ensuring that no riveting is seen on either face of the frame. On the front visible face of thesheet P, micro prismatic retro-reflective sheet conforming to Type-IV of ASTM: D 4956-09 shall be pressure fixed. The retro-reflective sheeting shall be tested for 3 year outdoor weathering test in Indian conditions as per IRC 67: 2012 & proof of the same in form of government report shall be uploaded with quoting tender. The rate include all materials, labour, equipments, fabrication, transportation, erection, installation and incidentals all complete as per direction of the Engineer-in-Charge. But excluding GST. 4 Providing and erecting direction and place identification retro-reflectorised sign as per IRC:67 made of high intensity grade sheeting videclause 801.3, fixed over aluminium sheeting type - IV,2 mm thick with area not exceeding 0.9 sqm supproted on a mild steel single angle iron pst 75x75x6 mm finnly fixed to the gorund by menas of properly designed foundation with M15 grade cement concrete 45x45x60 cm, 60cm below gorund level as per approved drawing. The retro reflective sheeting shall be tested for 3 year outdoor weathering test in indian condition as per IRC 67: 2012 & Proof for the same in form of government report shall be uploaded with quoting tender . Rates include design, Fabrication, supply, transprotation and erection of the sign board and also inclusive of all taxes, royalit , VAT etc all T&P/machine material and labour required for proper completion fo work (Excluding GST) (Size 80x60 cm). 5 Reflective Raised Pavement Marker with shanks Providing and fixing of raised pavement markers with twin shanks of adequate length anchored with epoxy / bitumen adhesive of approved make(Cat Eye) Type x- ASTMD-4956-04 Avery Dennision/3m(USA Make) having moulded body of polycarbonate, ASA, HIPS or ABS able to support a load of 13.635 M.T. tested in accordance with ASTMD 4280 type H and other requirement mentioned in MoRT&H Circular, its reflective lens made of micro prismatic lens (capable of providing total internal reflection of light), electronically welded to the body. The length, height and width of the body shall not exceed 130 mm, 20 mm and 105 mm respectively, The area of each reflective surface shall not be less than 13 Sq. cm . on each side sloping at the angle of 35 + 5 degree to the base to ensure maximum reflectively. it shall comply to specification of Category A of MoRT&H circular no. RW/NH 33023/10/97-DO-III dated 11.06.97 lenses shall be moulded of methyl methecrylate conforming to ASTMD 788 or equivalent. With 7 years warranty. Rate shall be inclusive of all taxes, royalty, VAT etc. etc. All T&P/ machine material and labour required for proper completion of work (Excluding GST) As per SI.No.11 6 Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC :67 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting type- IV, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing. The retro reflective sheeting shall be tested for 3 year outdoor weathering test in indian condition as per IRC 67: 2012 & Proof for the same in form of government report shall be uploaded with quoting tender . Rates include design, Fabrication, supply, transprotation and erection of the sign board and also inclusive of all taxes, royalit , etc all T&P/machine material and labour required for proper completion fo work (Excluding GST) (90 cm equilateral triangle) 7 Supplying & fixing of Linear Delineator System (LDS)panels made of Micro prismatic Retro Reflective sheeting Type XI duly laminated on thin aluminium foil to a unique corrugated shape to provide retro reflection across wide range of observations and external angles. Each LDS panel should be of nominal length of 33 inch and each ridge shall be approximately 0.34 inch high. Each LDS panel is to be firmly fixed onexistingConcrite / brick work with 16 NosFastner/ screwas per IRC 79-2019 -Rates are inclusive of all taxes, royalty,etc. all T&P/machine material and labour required for proper completion of work. sr no 12 ch 27 But excluding GST. 8 Providing and erecting a W metal beam crash barrier comprising of 3 mm thick corrugated sheet metal beam rail, 70 cm above road/ground level, fixed on ISMC series channel vertical post, 150 x 75 x 5 mm spaced 2 m centre to centre, 1.8 m high, 1.1 m below ground/road level, all steel parts and fitments to be galvanised by hot dip process, all fittings to conform to IS:1367 and IS:1364, metal beam rail to be fixed on the vertical post with a spacer of channel section 150 x 75 x 5 mm, 330 mm long complete as per clause 810 of MOR&TH.Rates include design, Fabrication, supply, transprotation and erection of the sign board and also inclusive of all taxes, royalit , etc all T&P/machine material and labour required for proper completion fo work (Excluding GST) 9 Supply and pasting of type XI Retro reflective stricker on vertical post of the crash barrier. Including all taxes but excluding GST.
