Tender For Supply Of Desk Cum Benches For The Students Two Seater And Three Seater

Sharing tender

Tender For Supply of Desk cum benches for the Students Two seater And Three Seater- 1 Work Items 2 Two seater desk bench Technical Specifications1100mm ( Length) x 900 mm (Front to Rear Width ) x 750mm ( Ground to Top Edge Height)DESK-TOP / BENCH /BACK REST PANELS: 18mm Pre-Laminated Board (Century or Green plywood with authorization affiliation ) with Laminate Color as per choice of the collegeDesktop - 1050mm (Length) x 400 mm (Width) x 700mm (Height) Bench - 1050mm(length)×330mm(width)×425mm(height) Rear (Back rest):1050mm(length)×200mm(depth)Important Note : PVC Edge Bending on all sides of the PLB panels and all the three PLBs should be housed within the metal frame structure leaving no exposed edges.FRAME STRUCTURE :1. 1.0mm thick Die-Cast Sheet Metal Structure (TATA,JSW,SAIL) on all sides of the Desk Bench, 25 mm widthNOTE : PIPE STRUCTURE WILL NOT BE ACCEPTABLE2. 0.8 mm sheet metal modesty cover3. Bottom Cross connectors should be made of 25x25x1.2mm & 50x25x1.2mm Square Metal Steel Pipes. (TATA,JSW,SAIL)4. 1.0mm Sheet Metal Shelf with rounded edges5. Two Metal Bag Hooks on either side of the desk bench6. All metal frame structure & Modesty Cover to be powder coated as per the choice of colour by the college authority. Hand painting or Chrome plating will not be accepted. Powder coating should be 60 microns with 11 tank process.7. Certificate of Powder Coating to be furnished in the technical bid as proof. 8. Nylon Level adjustors shall be provided at the bottom of understructure to take care of unevenness in floor.9. Rounded edges of Frame structure 3 Three seater desk bench Technical Specifications1500 mm ( Length) x 900 mm (Front to Rear Width ) x 750mm ( Ground to Top Edge Height)DESK-TOP / BENCH / BACKREST PANELS:18mm Pre-Laminated Board ( PLB ) with Laminate Color as per choice of the collegeDesktop - 1450 mm (Length) x 400 mm (Width) x 700mm (Height)Bench - 1450 mm(length)×330mm(width)×425mm(height)Rear (Back rest): 1450 mm(length)×200mm(depth)Important Note : PVC Edge Bending on all sides of the PLB panels and all the three PLBs should be housed within the metal frame structure leaving no exposed edges.FRAME STRUCTURE :1. 1.0mm thick Die-Cast Sheet Metal Structure on all sides of the Desk Bench, 25 mm widthNOTE : PIPE STRUCTURE WILL NOT BE ACCEPTABLE2. 0.8 mm sheet metal modesty cover3. Bottom Cross connectors should be made of 25x25x1.2mm & 50x25x1.2mm Square Metal Steel Pipes. 4. 1.0mm Sheet Metal Shelf with rounded edges5. Two Metal Bag Hooks on either side of the desk bench6. All metal frame structure & Modesty Cover to be powder coated as per the choice of colour by the college authority. Hand painting or Chrome plating will not be accepted. Powder coating should be 60 microns with 11 tank process.7. Certificate of Powder Coating to be furnished in the technical bid as proof. 8. Nylon Level adjustors shall be provided at the bottom of understructure to take care of unevenness in floor.9. Rounded edges of Frame structure