Tender For Construction Of Samaj Ghar At Upper Rolak (Prabhat Kirat Sangh) Sittong Iii Gp.
Tender Value
8.96 Lakhs
Estimated cost
Bid Submission
24 Jul 2024
0 days left
EMD
17936
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
kurseong → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Samaj Ghar At Upper Rolak (Prabhat Kirat Sangh) Sittong Iii Gp.
BOQ
| Sl. No. | Item Description |
| 1 | Earthwork in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing,spreading or stacking the spoils within a lead of 75m.as directed.The item include snecessary trimming the sides of trenches,levelling,dressing and ramming the bottom, bailing out water as required complete. (a) Depth of excavation not exceeding 1,500 mm. |
| 2 | Labour for laying 150 mm to 200 mm boulder soling including rough dressing hand packing and ramming down small pieces in the interstics including rolling and preparing the bed to proper level and filling up all joints with sandy clay or earth. Without rolling but including ramming. |
| 3 | Supply of boulder for soling |
| 4 | OrdinaryCement concrete (mix 1:2:4) with graded stone chips (20mm nominal size)excludingshutteringandreinforcement,ifany, ingroundfloor as per relevant IS codes. (b) River bazree |
| 5 | Ordinary Cement concrete (mix1:1.5:3) with graded stonechips (20mm nominal size)excluding shuttering and reinforcement if any, in groundfloor as per relevant IS codes.(ii ) River Bazree |
| 6 | Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removalof looserust (ifnecessary),cuttingtorequisitelength,hookingand bending tocorrect shape, placing inproperpositionandbindingwith16 gaugeblackannealedwireat every intersection, completeasperdrawing and direction.(a) For works in foundation and upto roof of ground floor/upto 4 m (i) Tor steel/Mild Steel.I.SAIL/ TATA/RINL |
| 7 | Hire an labour charges for shuttering with centering and necessary staging upto 4m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor)(a)25mm to 30mm thick wooden shuttering a sper decision & direction of Engineer-In-Charge. |
| 8 | 125mm. Thick brick work with1st class bricks in cement mortar (1:4) in ground floor. |
| 9 | Woodwork in door and window frame fitted and fixed in position complete including a protective coat of painting at the contact surface of the frame exluding cost of concrete,Iron Butt Hinges and M.Sclamps.(The quantum should be correted upto three decimals). (c) Sal : Siliguri. |
| 10 | Panel shutters of door and window,as per design (each panel consisting of single plank without joint), including fitting and fixing the same in position but excluding the cost of hinge and other fittings. In ground floor. (Incaseofnon-supply of single plank,penal rate of reduction of 20% wil be made) (iv) 25mm thick shutters with 12mm thick panel of size 30 to 45 cm. (a) Ordinary Teak wood |
| 11 | Plaster(to wall, floor, ceilingetc.)with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface](ii) With 1:4 cement mortar. (b) 15 mm thick plaster |
| 12 | Limepunningabout3mm. thickwithstone limeand shell lime (1:2) |
| 13 | Supplying, fitting&fixing1st qualityCeramic tiles inwalls and floors tomatchwith theexistingwork&4nos. of key stones (10mm) fixedwitharalditeat thebackof each tile& finishing the jointswithwhite cementmixedwithcolouring oxide if required to match the colour of tiles including rougheningof concrete surface, if necessaryorby synthetic adhesive & grout materials etc.(A) Floor WithSandCementMortar (1:4) 20mmthick&2mmthick cement slurry at back side of tiles using [email protected] Kg/Sq.m & joint filling using white cement slurry @ 0.20kg/Sq.m.(b) Area of each tile above0.09 Sq.m (i)Coloured decorative |
| 14 | (b)Priming one coat on timber or plastered surface with syntheticoil boundprimerofapprovedqualityincludingsmootheningsurfacesbysand papering etc. |
| 15 | (A)Paintingwithbest quality synthetic enamel paint of approved make and brandincludingsmootheningsurfacebysandpaperingetc. including using of approved putty etc. on the surface, if necessary:(a) On timber or plastered surface : (iv) Two coats (with any shade except white) |
| 16 | ApplyingInteriorgradeAcrylicPrimerofapprovedqualityandbrand on plastered or cencrete surface old or new surface to receive Distemper/Acrylicemulsionpaint including scrapingandpreparing thesurfacethroughly,completeaspermanufacturer\"sspecificationand as per direction of the EIC. (In Ground Floor)(a) One Coatii)Solvent based interior grade Acrylic Primer |
| 17 | ProtectiveandDecorativeAcrylicexterioremulsionpaintofapproved quality, as permanufacturer\"s specification and as per direction of Engineer-in-Chargetobeappliedoveracrylicprimerasrequired.The rate includes cost ofmaterial, labour, scaffoldingandall incidental charges but excluding the cost ofprimer. b) Premium 100% Acrylic Emulsion |
| 18 | Supplying, fitting and fixing M.S.clamps for door andwindow frame made of flat bent bar,end bifurcated with necessary screws etc.by cement concrete(1:2:4)as per direction. (Cost of concrete will be paid separately) (a) 40mm X 6mm, 250mm Length |
| 19 | Iron butt hinges of approved quality fitted and fixed with steel screws,with ISI mark. (vi) 100mm. X 50mm. X 1.25mm. |
| 20 | Anodised aluminium skeleton bolt of approved quality manufactured from extrudedsectionconforming to I.S: specification (I.S: 204/74) fittedand fixed with cadmiim plated screws: (vi) 450mm long x 12mm dia. bolt. |
| 21 | Anodised aluminium barrel / tower / socket bolt (full covered) of approved manufactured fromextrudedsectionconforming to I.S. 204/74 fitted and fixed with cadmium plated screws: (iii) 100mm long x 10mm dia. bolt. |
| 22 | Add 7% of the total from item no 1-21 for Electrical Works |
| 23 | Add GST 18% on Rs. 752462.57 i.e. total amount over item no. 1 to 22 |
| 24 | Add Labour Welfare Cess 1% of Rs 887905.83 i.e. total amount Item No. 1 to 23 |
AI Tender Summary
Tender Timeline
Jul 18, 2024
11:30 IST
Tender Published
Tender notice published.
CompletedJul 24, 2024
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJul 27, 2024
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender