Tender For Maintenance Of St Georges Highersecondary School Cebemo Hall, Pedong Gp.
Tender Value
28.92 Lakhs
Estimated cost
Bid Submission
31 Jul 2024
0 days left
EMD
57852
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
pedong → West Bengal
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Maintenance Of St Georges Highersecondary School Cebemo Hall, Pedong Gp.
BOQ
| Sl. No. | Item Description |
| 1 | CONSTRUCTION OF MAIN BUILDING |
| 2 | Plumconcreteworkwith40%cement concretewith30mmdowngraded stonemetal and60%stoneboulderof size150mmandabove, placedin position as directed excluding shuttering if any.(i) (1:3:6) proportion |
| 3 | Hire an labour charges for shuttering with centering and necessary staging upto 4m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor)(f) 25 mm to 30 mm shuttering without staging in foundation |
| 4 | Labour for laying150mmto200mmboulder soling includingrough dressing hand packing and ramming down small pieces in the intersticswithout rolling but including ramming. |
| 5 | (II) Cement concrete with 30 mm down gradedshingles excluding shuttering. N.B. Variety (a) 1:3:6 proportion |
| 6 | Woodwork in door andwindow frame fitted and fixed in position complete including a protective coat of painting at the contact surface of the frame exluding cost of concrete,Iron Butt Hinges and M.S clamps.(Thequantumshould be correted upto three decimals). |
| 7 | Supplying, fitting and fixing M.S.clamps for door andwindow frame made of flat bent bar,end bifurcated with necessary screws etc.by cement concrete(1:2:4)as per direction. (Cost of concrete will be paid separately)(a) 40mm X 6mm, 250mm Length |
| 8 | Plaster(to wall, floor, ceilingetc.)with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface](ii) With 1:4 cement mortar. (b) 15 mm thick plaster |
| 9 | Neat cement punningabout 1.5mmthick inwall, dado,window sill, floor etc. NOTE:Cement 0.152 cu.m per100 sq.m. |
| 10 | Supplying, fitting&fixing1st qualityCeramic tiles inwalls and floors tomatchwith theexistingwork&4nos. of key stones (10mm) fixedwitharalditeat thebackof each tile& finishing the jointswithwhite cementmixedwithcolouring oxide if required to match the colour of tiles including rougheningof concrete surface, if necessaryorby synthetic adhesive & grout materials etc. (a) Area of each tile upto0.09 Sq.m Floors Other than coloured decorative |
| 11 | Supplying, fitting&fixing1st qualityCeramic tiles inwalls and floors tomatchwith theexistingwork&4nos. of key stones (10mm) fixedwitharalditeat thebackof each tile& finishing the jointswithwhite cementmixedwithcolouring oxide if required to match the colour of tiles including rougheningof concrete surface, if necessaryorby synthetic adhesive & grout materials etc. (a) Area of each tile upto0.09 Sq.m Walls Other than coloured decorative |
| 12 | Supplying and laying true to line and level Anti-Skid,FullBody,Homogeneous & Granular finish Vitrified Tiles conforming to IS:15622-2006&IS4457-2007 and testing shall be made in accordance with IS:13630[Non-modular sizes for tiles with Skid resistance>0.5,Mohr\"s hardness>5.0, Staining resistance: Class-Supplyingand laying true to lineand level vitrified tilesof approved brand(size not less than 600mmX600mmX10 mmthick) in floor, skirtingetc. set in 20mm sand cement mortar (1:4)and 2mm thick cement slurry back side of tiles using [email protected]./sq M o rusing polymerised adhesive (6mmthicklayerapplieddirectlyoverfinishedartificialstone floor/Mosaic etc without any backing course) laid after application slurryusing1.75Kgof cement per sqMbelow mortar only, joints grouted with admixture of white cement and colouring pigment tomatch with colour of tiles / epoxy groutmaterialsofapprovedmakeasdirectedandremovalof wax coating of top surface of tiles withwarmwater and polishingthetilesusingsoftanddryclothuptomirror finish completeincludingthecostofmaterials, labourandallother incidental charges complete true to the manufacturer\"s specification and direction of Engineer-in-Charge. (White cement,syntheticadhesiveandgroutmaterial tobesupplied by the contrr]e) (I) [email protected]/ Sq.m, 20mmsand cementmortar(1:4)&2mmthickcement slurryatbackside of tiles, 0.2 kg/ Sq.mwhite cement for joint filling with pigment. (A) Deep Colour & White |
| 13 | Panel shutters of door and window,as per design(each pane consisting of single plank without joint), including fitting and fixing the same in position but excluding the cost of hinge and other fittings. In ground floor.(ii) 40mm thick shutters with 19mm thick panel of size 30 to 45 cm.(b) Sishu,Gamar, Champ,Badam,Bhola, Mogra, Hallak. |
| 14 | Glazed shutters of doors, windows, fan light, clerestorywindows etc. as per design(withordinaryglassof7.4kg./sq.m.3mm.Thick) fittedwithputtybedand teakwoodbeadandnails including fittingand fixing shutter in positionbut excludingthecostofhingesandotherfittings.costofglass,putty,woodedbeads etc.will be paid separately. In ground floor.(i) 40mm thick shutters. (b) Sishu,Gamar, Champ,Badam,Bhola, Mogra, Hallak. |
| 15 | (a) M.S.or W.I. Ornamental grill of approved design joints continuously welded with M.S, W.I. Flats and bars of windows, railingetc. Fitted and fixed with necessary screws and lugs in ground floor.(ii)Grill weighing above 16 Kg./sq.mtr above |
| 16 | M.S. structural works in roof trusses with tubular sections conforming to IS: 806-1968&IS: 1161-1998 cnnected to one another with bracket, gusset cleats as per design, direction of Engineer-in-charge complete including cutting to requisite size, fabricationwithnecessarymetalarcweldingconformingtoIS:8161969&IS: 9595 using electrodes of approvedmake and brand conforming to IS:814-2004, haulage, hoisting and erection all complete. Therateincludes thecostof rolledsteel section, consumablessuch aselectrodes,gasandhirechargeofalltoolsandplantsandlabour reqired for the work including all incidental chages such as electricity charges, labour insurance charges etc. Payment tobemadeonthebasisofcalculatedweightof structural tubularmemebrsas specified inrelevent IScode in finishedwork. Payment forgusset,bracket,cleatmaybemadebyaddingtheactual weightofsuchitemswithweightof finishedstructuralmembers.The ratesareconsideredforaheightof erection8m. /2ndfloor level fromtheground.Add1.5%extraover therateforeachadditional floor or 4m. beyond the initial 8 m. or part thereof. ii) For trusses spanning above 12.00 m and up to 20 .00 m |
| 17 | Galvanised corrugated iron sheet work (excluding the supportingframework)fittedandfixedwith10mm.diaJor Lhook-bolts, limpetandbitumenwashersandputtycomplete with150mm.endlapandonecorrugationminimumsidelap. (Payment tobemadeonareaof finishedwork)(GCIsheet to be supplied by contractor)(i) In Roof :-a) With 0.60 mm thick sheet |
| 18 | Galvanised iron sheet ridging fittedwith necessary bolts, screws, washers etc complete.(225mm end lapping)(A) 300 mm lapping each way (a) With 0.60 mm sheet |
| 19 | Supplyfitting, fixing cast iron down pipes conforming toIS:3989-1970and IS:1729-1964in position with necessary clamps,nails including making hole in wall, floor etc.and cutting trenches in any soil through masonry concrete structures etc. if necessary and mending good damages including joining with jointing materials complete.[ Payment will bemade on centre line measurement of the total pipeline including specials.Payment forspecials will however be paid separately ]. |
| 20 | (A) Wood work in posts, post plates, rafters, battens, truss members, purlins etc. fitted and fixed complete (excluding the cost of bolts, paints, but including the cost of nails, screws etc.) (The quantum should be corrected upto three decimals) (ii) Sal : Local. |
| 21 | Ceilingofcommercialplyasperdesignfittedandfixedcomplete(excludingthe supporting framework but including necessarywood battens of size 40mmx 20mm ). In ground floor (iii) 12mm thick (a) Ordinary Teak |
| 22 | (b)Priming one coat on timber or plastered surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. |
| 23 | (A) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary :(a) On timber or plastered surface :(i) One coats (white in shade ) |
| 24 | Applying decorative cement based paint of approved quality after preparing the surface including scraping the same thoroughly (plastered or concrete surface) as per manufacturer\"s specification. (iii) Two coats. |
| 25 | Acrylic Distemper to interior wall, ceiling with a coat of solvent based interior grade acrylic primer (as per manufacturer\"s specification) including cleaning and smoothning of surface.Two Coats |
| 26 | Ironbutthingesofapprovedquality fittedand fixedwithsteel screws,withISI mark. (viii) 100mm. X 75mm. X 3.50mm. |
| 27 | Ironbutthingesofapprovedquality fittedand fixedwithsteel screws,withISI mark. (vi) 100mm. X 50mm. X 1.25mm. |
| 28 | Iron socket bolt of approved quality fitted and fixed complete. (e) 300mm long x 10mm dia bolt. |
| 29 | Iron socket bolt of approved quality fitted and fixed complete. (d) 225mm long x 10mm dia bolt. |
| 30 | Iron socket bolt of approved quality fitted and fixed complete.(c) 150mm long x 10mm dia bolt. |
| 31 | i) Ironhaspbolt of approvedquality fittedand fixedcomplete (oxidised)with 16mm dia rod with centre bolt and round fitting. (c) 300mm long. |
| 32 | i) Ironhaspbolt of approvedquality fittedand fixedcomplete (oxidised)with 16mm dia rod with centre bolt and round fitting. (a) 200mm long |
| 33 | Anodised aliminium D-type handle of approved quality manufactured from extruded sectionconforming to I.S. specification (I.S. 230/72) fittedand fixed complete: (b) With round Base (v) 150 mm grip x 12 mm dia rod. |
| 34 | Anodised aliminium D-type handle of approved quality manufactured from extruded sectionconforming to I.S. specification (I.S. 230/72) fitted and fixed complete: (b) With round Base (iii) 100 mm grip x 12 mm dia rod. |
| 35 | Anodised aliminium D-type handle of approved quality manufactured from extruded sectionconforming to I.S. specification (I.S. 230/72) fitted and fixed complete: (b) With round Base (ii) 100 mm grip x 10 mm dia rod. |
| 36 | Iron catch hook of approved quality fitted and fixed to shutter and chowkat. (a) 6mm dia x 100mm long. |
AI Tender Summary
Tender Timeline
Jul 18, 2024
11:30 IST
Tender Published
Tender notice published.
CompletedJul 31, 2024
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedAug 03, 2024
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender