|
| 1 | M&L preparing black top surface by brushing with brushes for removing caked mud etc sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc on black top/concrete surfaces than applying evenly priming tack coat with paving Bitumen 60/70 or VG-30grade over the prepared surface bymechanical sprayer @ 5 kgs/10 Sqm of surface areacomplete all as specified and directed. |
| 2 | M&L for applying bituminous premixed semi dense asphaltic concrete 30 mm thick (consolidated thickness) with 5.50%binder of paving Bitumen VG-30grade, content by weight of total mix including cement filler, on surfaces,rolled compacted with using 8 to 10 tonne capacity power roller to achieve the required compactness, camber and gradient mixed in hot mix plant using design mix and laid by mechnaical paver finisher complete all as specified and directed.NOTE:-(i) The actual binder content used shall be as per optimised content based on approved job mix formula irrespective of what ever indicated in Sch \"A\".(ii) Price adjustment shall be done on MINUS side only @ Rs. 45,000/- per MT(without considering the permissible tolerance on minus side) with reference to binder content indicated in Sch \"A\".(iii) No Price adjustment for Bitumen shall be done for variation on plus side.(iv) Please note that SDAC to be laid immediately after laying of BM. In case the SDAC could not be laid within 48 hours of laying of BM, primer coat @ 3Kg / 10Sqm to applied over freshly prepared bituminous surface and nothing extra shall be paid by the Govt. on this account. No claim what so ever shall be entertained by Govt on this account. |
| 3 | M&L for preparation of existing bituminous surfaces, removing, dust, dirt grease and other foregion matters etc to receive the markign and M&Lfor thermo plastic (Reflective) line, dashes, arrows, letters etc ofsizeexc 10cm wide marking, having 2 mm thickness (average) of uniform surface finish conforming to BS3262 (Part 1) 1989 read in conjunction with the MOSTspecification 803 clause 4.2.2 on bituminous surfaces in white/yelow clour and super imposed with glass beads confirming to BS 6088 read in conjuction with and MOST specification 803 clause 4.3.3 complete all as specified and directed:- Note: - MOST specification 803 shall be followed strictly for execution of work&suitable machine shall beused for the marking as approved by the GE. Shape & size/ patterns ofmarking shall be as approved by the GE. |
| 4 | S&F in repair Road Stud (Cat Eye) of size100x100x26 mm body made of ABS body dynamically designed very high impact strength non breakable polycarbonate with electronically welded prismatic retro- reflective lense on both sides for maximum retro-reflection in wet and dry condition. Body shall be dust proofi.e. non dust accumulation on lense and space shall be built for finger grip, including fixing with bitumen adheshive BT-69 complete all as specified and directed.. |
| 5 | S&F in repair Solar Cat Eye Aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 80mm) of high efficiency Mono rystafie solar panel 2.4V/0.3 watt one NI-ed rechargeable battery (1.2V/1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufactures instructions etc. complete all as specified and directed. |
| 6 | S&F in repairs Convex mirror with ABS frame of size 60 cm dia fixed on MS Pipeand embedded in ground with PCC{1:2:4}, type B1 ( using 20mm. graded stone agg) including necessury earh work in foundation completeall as specified and directed. |
| 7 | Demolition of cement concrete (unreinforced) in ground floor and in paving not exceeding 15cm thickness (below or above ground level) and including removal of old materials from site out of A1 defence land complete all as specified and directed by Engineer-in-charge. |
| 8 | Demolition of cement concrete of any description and in any position not oterwise specially provided for complete all as specified and directed. |
| 9 | M&L forProviding, cement concrete (1:2:4), type B1, (using 20mm graded stone aggregate) as in berm, coping and similar work includingformwork (straight or curved) and finishing complete all as specified anddirected.. |
| 10 | M&L for 75mm thick cement concrete (1:3:6),type C-2using 40mm graded stone aggregate over rammed earth as in sub base to receive floor finish etc complete all as specified and directed by Engineer-in-charge. |
| 11 | Providing and laying 60 mm thick factory made chamfered edge glossy finish cement concrete paver block of M-35 grade with approved colour design and pattern as in footpath, parks, lawns, drive ways or laight traffic parking etc of required strength, thickness & size/ shape, made by table vibratiry method using PU mould, laid in required colour and pattern over and incl 50 mm thcik compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocksinto sand bedding layer through vibratory compaction by uding plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed. |
| 12 | M&L for preparation of concrete surfaces of any description, not otherwise describedexc 10cm in width or girth and applyingone coat of synthetic enamel paint complete all as specified and directed.. |
| 13 | S&F in repairs Informatory Reflective sign board having High Intensity prismatic tape base and font duly fixed on 2/3 mm thick aluminium sheet, matter to be laser cut and fixed on sheet. Matter to be in bilingual with logo as given incl boarder and arrow sign. Aluminum sheet to be fixed wtih and incl 25 mm SS304 grade frame around. Board incl frame to be fixed with and incl 50 mm round/ square SS 304 grade pipe(02 Nos) with 50 mm spacer pipe between board and post with SS fancy ball on top of each post. Height above ground 2.00 m and below ground 0.45 m, incl embedding in ground with PCC 1:2:4 complete all as specified and directed. Make of High Intensity reflective tape shall be 3M/ DM/ Avery Dennison all as specified and directed. The size of board shall be as under: |
| 14 | Size 1.20 m x 0.90 m Single side reflective. |
| 15 | Size 1.20 m x 0.90 m Both side reflective. |
| 16 | Size 1.20 m x 1.20 m Both side reflective. |
| 17 | Size 0.90 m x 0.60 m Single side reflective, |
| 18 | S&F in repairs Informatory Reflective Side slanting sign board having High Intensity prismatic tape base and font duly fixed on 2/3 mm thick aluminium sheet, matter to be laser cut and fixed on sheet. Matter to be in bilingual with logo as given incl boarder and arrow sign. Aluminum sheet to be fixed wtih and incl 25 mm SS304 grade frame around. Board incl frame to be fixed with and incl 50 mm round/ square SS 304 grade pipe (02 Nos) with 50 mm spacer pipe between board and post with SS fancy ball on top of each post. Height above ground 2.00 m and below ground 0.45 m, incl embedding in ground with PCC 1:2:4 complete all as specified and directed. . The size of board shall be as under: |
| 19 | Size 1.80 m x 1.20 m Both side reflective. |
| 20 | Size 1.20 m x0.90 m Both side reflective |
| 21 | S&F in repairs Informatory/ Caution/ Parking/ Speed limit Reflective sign board having High Intensity prismatic tape base and font duly fixed on 2/3 mm thick aluminium sheet, matter to be laser cut and fixed on sheet. Matter to be in bilingual with sign as given incl border . Aluminum sheet to be fixed wtih and incl 25 mm SS304 grade frame around. Board incl frame to be fixed with and incl 50 mm round/ square SS 304 grade pipe single post. Height of post above ground 2.00 m and below ground 0.45 m, incl embedding in ground with PCC 1:2:4 all as specified and directed . The size of board shall be as under: |
| 22 | Size 600x900 mm with Both side reflective. |
| 23 | M&l for removing of reflective tape from existing tape from existing fixed sign board and fixing new High Intensity prismatic tape base and font duly fixed on existing board, matter to be laser cut and fixed on sheet. Matter to be in bilingual with sign as given incl border |
| 24 | S&F in repairs ABS body speed breaker of width 400 mm, height 50 mm and load capacity not less than 80 tonne complete including fixing in roads with fixing nails and solution complete all as specified and directed. |
| 25 | S&F metal tubular delinator made out of ABS round body fitted with 02 Nos 65mm highly reflective reflectors made out of PMMA and mounted on 50mm dia mild steel pipe of 600mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25mm wide strips with anti theft steel net for reflector protection including enbedding in PCC (1:2:4), type B1 (using 20mm graded stone agg) withpcc foundationblock of size 150x150x300mm complete including excavationin infoundation in any type of soilall as specified and directed. |
