|
| 1 | Item 1 Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area & stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Manual Means Spec. No.: Bd.A.1 Page No. 259 |
| 2 | Item 2 Excavation for foundation in earth, soils of all types, sand,gravel and soft murum, including removing the excavated material upto a distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift from 1.5m to 3.0m) By Mechanical Means |
| 3 | Item 3Providingdry/trap/granite/quartzite/gneissrubblestonesoling15cmto20cmthick including hand packing and compacting etc. complete. |
| 4 | Item 4Providing and laying in situ cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, formwork, cover blocks compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) complete, With fully automatic micro processor based PLC with SCADA enabled reversible drum type concrete mixer . With natural sand. Spec. No.: Bd.F.3 Page No. 298 and B.7, Page No.38 |
| 5 | Item 5 Providing uncoursed rubble masonry of trap / granite / quartzite / gneiss stones in cement mortar 1:6 in foundation and plinth of inner walls / in plinth of external walls including bailing out water manually , striking joints on un exposed faces and watering etc.complete. |
| 6 | Item 6Providing and casting in situ cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including centering, formwork, cover blocks compacting and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement).With fully automatic micro processor based PLC with SCADA enabled reversible drum type concrete mixer. With natural sand. Spec. No.: Bd.F.5 Page No. 300 and B.7, Page.No. 38, DSR PNO.34,2A a i / 5 BDF 5 |
| 7 | Item 7Providing and laying Cast in situ/Ready Mix cement concrete M- 20 of trap / granite /quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand SSR P/INO.191/25.50 BDF 6 |
| 8 | Item 8 Providing and laying Cast in situ/Ready Mixcement concrete M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C. chajja as per detailed design and drawings including steel centering, formwork, cover blocks, laying/pumping, compacting and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) |
| 9 | Item 9 Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap/ granite /Guartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including centering, formwork, cover blocks, laying/pumping, compactionfinishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc.complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADAenabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand SSR 2017-18 PNO/INO.202/26.33 BDF 17 |
| 10 | Item 10 Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. SSR202/26.33 BDF 17 |
| 11 | Item 11 Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cementmortar 1:6 in foundations and plinth of innerwalls/ in plinth external walls including bailing out water, striking joints on unexposed faces, raking out joints on exposed faces and watering Complete.SSR 215/27.01 BDG 1 |
| 12 | Item 12 Filling in plinth and floors with contractors material/brought from outside and approved by Engineer incharge in layers of 15 cm to 20 cm including watering and compaction etc. complete.SSRPN/INO 157/21.37 BDA 10 B) With contractors soil |
| 13 | Item 13 Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in Super Structure, striking joints on unexposed faces, raking out joints on exposed faces and watering Complete. Spec. No.: Bd.G. 1 Page No. 313 DSR PNO. 77, 1 / 6 BDG 1 |
| 14 | Item 14 Providing internal cement plaster 12 mm thick in two coats in cement mortar 1:3 without neeru finish, to concrete, brick surface, in all positions including scaffolding and curing complete Spec. No.: Bd.L.4 Page No. 368 DSR PNO. 90, 3a /11 BDL 4 |
| 15 | Item 15 Providingcement plaster 20mm thick in single coatin c. m. 1:3 without neeruFinish to concrete or brick surfaces, in allpositions including scaffolding and curing complete.SSR PNO/I NO. 226/32.03 BDL 2 |
| 16 | Item 16 Providing and fixing rolling shutter fabricated from steel laths of minimum thickness 0.9 mm with lock plate of 3.15 mm thickness reinforced with 35 x 35 x 5 mm angle section fitted with sliding bolts and handles for both sides, deep M.S. channel section of depth and thickness not less than 65 mm and 3.15 mm respectively with hold fast arrangements, M.S. Bracket plate 300 x 300 x 3.15 mm minimum size and shape with square bar, suspension shaft of minimum 32 mm diameter, hood cover of M.S. sheet not less than 0.9 mm thickness and of any size at top and safety devices including mechanical gear operation arrangement consisting of worm gear wheels and worms of high grade cast iron or mild steel and one coat of red lead primer etc. complete. (I.S. 62481979) (Without mechanical gear) (SSR ITEM 39.24 / PG 181) |
| 17 | Item 17 Providing and fixing collapsible steel gate in one / two leaves with hot rolled vertical channels of 18 x 9 x 3 mm minimum size, crossings of M.S. flats of size 18 x 5 mm T or E section for runner of minimum 40 x 6 mm size for flange, M.S. flat for top runner of minimum size 40 x 12 mm with roller wheels confirming to grade F.G. 150 fitted with snap headed rivets of minimum size 6 mm max. spacing of vertical channels be 100 mm enclosed gate position and clear space of 150 mm between two sets of crossings with hold fasts, stoppers, spaces, handles, locking arrangement and one coat of red lead primer and oil painting etc. complete. (I.S. 105211983). |
| 18 | Item 18Providing and fixing double leaf steel door without ventilator including shutter of MS frame of angle 50x50x6 mm and shutter frame of MS angle of 30x30x6 mm and shutter sheet of 10 guage of approved quality with hold fast neceaasry fixing and fastening and Fixtures,necessary welding with oil painting three coats including primer coate complete as per detailed drawings and as directed complete. |
| 19 | Item 19 Providing and applying two coats of water proof cement paint of approved manufacture and of approved colour to the plastered surfaces including scaffolding if necessary, cleaning and preparing the surface, watering for two days etc. complete. |
| 20 | Item 20 Providing and applying plastic emulsion paint of approved quality, colour and shade to old and new surfaces in two coats including scaffolding, preparing the surface. (excluding the primer coat)etc. complete. |
| 21 | Item 21 Providing and laying vitrified mirror / glossy finish tiles decorative type having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 ( group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. complete.A) Flooring |
| 22 | Item 22 Providing and laying vitrified mirror / glossy finish tiles having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 ( group Bla) of approved make, shade and pattern for dado and skirting in required position fixed in 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. complete B) Skirting |
| 23 | Item 23 Providing and fixing Information Sign Board of Size 0.90 X 0.60m. Prepared on 16 gauge M.S. Sheet with Horizontal bracing of M.S. Flat on size 25 X 6 mm including Painting with One Coat Zinc Chrome primer and Two coats oil painting including two number of M.S. angle Iron Post of Size 50 X 50 X 6 mm of 2.70 m lomg including Conveying all taxes fixing in Ground with cement concrete1:4:8 block of 45 X 45 X 45 cm size as directed by Engineer in charge etc. complete. |
| 24 | Item 24 Test Report fine Aggrigate fineness Modulus |
| 25 | Item 25 Test Report Basic Test of AggrigateWater Absorption |
| 26 | Item 26 Test Report Bricks |
| 27 | Item 27 Test Report Concrete M-20 |
| 28 | Item28 ADD FOR ROYALTY CHARGES OF SAND |
| 29 | Item29 ADD FOR ROYALTY CHARGES OF OTHER MATERIAL |
| 30 | Item 30 ADD GST |
