Tender For approval of market rate of tender/job work for supply of street lighting items, 1 Excavation in foundation in ordinary soil (Loam, clay or sand) ncluding lift upto 1.50 M. and lead upto 30 M. and including filling watering and ramming of excavated earth into the trenches or into the space between the building and the sides of foundation enches or into the plinth and removal and disposal of surplusearth as directed by the Engineer-in-charge upto a distance of 30 M. from the foundation trenches. (Where machine can not reach/move). 2 Supplying, fitting and placing with MS bar reinforcement (Fe 415) in substructrue complete as per drawings and technical specification Clauses 1002, 1005, 1010 & 1202 including bending for proper and necessary completion of the work and including supply of steel and wastages, bends, hooks and authorised overlapping shall be measurised as per direction of Engineer-in-charge. 3 R.C.C. work with Cement approved coarse sand and 2 cm.(3/4) gauge approved stone ballast in the proportions of 1:1.5:3 in lintels fo doors and windows excluding supply of reinforcement and its binding but including its fixing and binding the same with 24 B.W.G.G.I., binding wire and including necessary centering andhuttering etc. and also including supply of all materials, labour and T & P etc. required for proper completion of the work.Excluding cost of Binding wire. 4 Supply and fixing of LED Street light Fitting havingdie cast aluminium body and diffuser with driver setsuitable for 75 to 90 Watt. Confirming to IP 66Protection complete in all respect S.I 5 Supplying and laying of following size DWC HDPE pipe ISI markedalong with all accessories like socket, bend, couplers etc conforming to IS 14930, Part II complete with fitting and cutting,jointing etc. in the existing trench, complete as required. 6 Supply and laying of aluminium conductor PVCinsulated armoured served sheathed cables 1100 Voltsgrade at a depth of 750 mm below ground level over acushion of 75 mm. thick sand all around and protectedwith burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size oras directed by the Engineer-Incharge, complete in allrespect. The armouring of the cable shall be properlyconnected with the earth conductor by clamps etc S.I 503(J) 7 Supply and wiring of submains with 3 nos. 2.5 sq mm &with 1 no earth wire of FRLSH PVC insulated1100 V grade single core multistrand copper conductorcable in existing PVC conduit complete, includingsupply of all material, labour and T & P etc. required forproper completion of the work as directed by Engineer incharge 8 S&F of 6 Amp to 32 Amp. SPMCB (10 KA) C Curve CAT A S.I No.1002 9 Supply & Fixing of acrylic sheet (12 incx9incx3 mm )including Computer writing complete in all respect (PSR) 10 Supply and fixing of plain or pin type copper tin plated cable socket ( lug ) to the cable leads, insulating with tapeand aking connection etc. complete in all respect as perdirection of the Engineer-Incharge. S.I No 504 11 Supply and laying of 25mm x 3mm G.I. strip from arthelectrode directly in the ground as required complete inall respect S.I No.716 12 Supply and fixing of one number 8 SWG G.I. wire in 15mm dia. G.I. pipe for earthing, laid in ground or in wallduly concealed including the cost of cement, sand, labour,T&P other material required for proper completion of thework as directed at site. 13 Supply and fixing of 8 SWG GI wire along with steel conduit pipe duly bound with earth clops as directed by the Enginner in charge with supply of all material labour and T&P required for proper completion of work 14 Supply and burying of 40mm dia x 4.5 metres long G.I. vertically for earthing having 12mm dia. Holes spaced 75mm apart drilled up to 2 metre from the bottom complete with earthing lead of No. 6 to 8SWG GI wire in G.I. Pipe up to appron (and from appron to switch board the cost of G.I. wire and pipe will be extra) upto switch board, 30cm square C.I. box with hinged cover masonary enclosure, funnel at top, alternate layers of charcoal/coke and salt at least 150mm thick alround etc. as per directions of Engineer-in-charge complete in all respects as per drawing. 15 Supply and fixing following capacity of automatic street light cubicle control panel painted with anticorrosive alkali and acid proof paint consisting of time switch TSO 100 series with contactors, HRCfuses, isolating switch metering instrument &instrument box with CTs etc. in case of TPN, mplete in all respect. 16 Construction of granular sub-base by providing coarse graded material spreading in uniform layers with motor grader on prepared surface mixing by mix in place method with rotavator at OMC,and compacting with vibratory roller to achieve the desired density ,complete as per clause 401. 17 Laying of interlocking tile of 60 to 80 mm thick including levelling and dressing of surface up to required level and slopes over 30 mm thick bed and filling joints with fine sand including cost of fine sand , labour , T & P etc complete But excluding cost of tile as directed by Engineer in charge . 18 Laying & supplying of 80 mm precast cement concrete I- shape Interlocking paver blocks with top layer of minimum 8 mm thickness having plan dimesion 200X(160+120mm)OP Cement,smoot high gloss finish skid resistant manufactured from rubber moulds through vibro-compression mechanism.The compressive strength of concrete paver block shall not be less than 30 Mpa (m -30) and weight 5 kg per no. conferming to IS:15658-2006 including cost of material ,labour ,T &P etc.required for proper completion of the work as directed by Egneer -in charge .But excluding up TT which shall be paid extra as rules as per item no.9 19 Supply and laying of aluminium conductor PVCinsulated armoured served sheathed cables 1100 Voltsgrade at a depth of 750 mm below ground level over acushion of 75 mm. thick sand all around and protectedwith burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size oras directed by the Engineer-Incharge, complete in allrespect. The armouring of the cable shall be properlyconnected with the earth conductor by clamps etc S.I 503(J) 20 Supply & fixing of 8mtr GI Octagonal Pole of approved make (top dia 70mm, Bottom dia 135 mm and base plate 12mm thik) having 3mm thikness with single arm bracket (1 Mtr length) on RCC foundation including the cost of foundation, foundation bolts, excavation & back filling and Required T&P completee in all respect. 21 Supply and fixing of plain or pin type copper tin plated cable socket ( lug ) to the cable leads, insulating with tapeand aking connection etc. complete in all respect as perdirection of the Engineer-Incharge. S.I No 504 22 Supply & fixing 3mm thikness with single armbracket (1 Mtr length) 23 S&F of 63 Amp. 415 V metal clad TP HRC type switch fuseunit complete with HRC fuse on angle iron bracket complete inall respect. 24 S&F of 100 Amp. 415 V metal clad TP HRC type switch fuseunit complete with HRC fuse on angle iron bracket complete inall respect. 25 Supply and wiring of submains with two nos. of10/6/4 sq. mm.PVC insulated 1100 V grade single core aluminium conductor cable in supply of all material, labour and T & P etc. required for proper completion of the work as directed by Engineer in charge.90 M/100 M(10 Sqm MM 26 6 MM 27 4 MM 28 Supply and wiring of submains with two nos. of1.5/2.5 sq. mm.PVC insulated 1100 V grade single core Coper conductor cable in supply of all material, labour and T & P etc. required for proper completion of the work as directed by Engineer in charge.1.5mm 29 2.5mm 30 Supply and fixing of LED Flood light Fitting havingdie cast aluminium body and diffuser with driver set suitable for 170 to 200 Watt. Confirming to IP 66Protection complete in all respect S.I 31 Supply and fixing of granite stone for inauguration
