|
| 1 | Dismantling of flexible pavements and disposal ofdismantled materials up to a lead of 1000 metres,stacking serviceable and unserviceable materialsseparately etc. complete. |
| 2 | Removing rich mix cement concrete including stacking the spoils as directed with all leads, lifts etc, complete. |
| 3 | Excavation for roadway in earth, soil of all sorts,sand, gravel or soft murum including dressingsection to the required grade, camber and side slopesand conveying the excavated materials with all liftsupto a lead of 50m. and spreading forembankment or stacking asdirected. |
| 4 | Construction of granular sub-base by providing closegraded Material, mixing in a mechanical mix plant atOMC, carriage of mixed Material to work site,spreading in uniform layers with motor grader /Paver on prepared surface and compacting withvibratory roller to achieve the desired density,complete as per clause 401 -- Plant Mix Method andGrading - II Material |
| 5 | Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) |
| 6 | Providing and laying 125 micron Low DensityPolyethylene (LDPE) sheet confirming to IS 3395 :1997 below concrete pavement including allmaterials and labour complete. |
| 7 | Providing and laying in-situ M30 Grade unreinforcedplain cement concrete pavement over a preparedsub base with 43 grade cement , coarse andfine aggregate( VSI grade finely washed crushedsand) conforming to IS 383, using fine andcoarse aggregates combined gradation as perTable 600-3 of MORTH Specification 2013, mixedin a batching and mixing plant/ non tilting mixerand Weigh batcher as per approved mix design,admixtures, transporting to site, spreading, layingwith approved make paver,compacted and finished ina continuous operation, finishing to lines andgrades as directed by Engineer-in-charge andcuring by curing compound /by providing cementvata in cement Mortar 1:8 @0.6m X 0.6m centre tocentre, admeasuring 80 mm at bottom and 40 mm attop with depth of 75mm and maintaining the samethroughout curing period by any other methodapproved by Engineer-in- charge. |
| 8 | Cutting transverse contraction joints 3 to 4 mm wideand depth 60mm. .in concrete slab using concretecutting machine with diamond studded saw within48 hours of casting of bay / slab etc. completeincluding subsequent widening of the groove 8 to 10mm. wide at top having depth of 15 mm. as directedby Engineer incharge. |
| 9 | Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters forR.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. |
| 10 | Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite/quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade |
| 11 | Providing soling using 80 mm size trap metal in 15 cm. layer including filling voids with Crushed sand/grit, ramming, watering etc. complete. |
| 12 | Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) |
| 13 | Providing and fixing factory madeHydraulically pressed Mechanically vibratedand compacted precast inter locking cement concretepaving blocks 80MM thick in M-40 grade of approvedsize and shape for City streets, small /mediummarket roads,low volume roads, utility cuts onarterial roads etc. as specified and as per IS15658:2006 including cost of all materials,manufacturing, curing, transportation of blocks to work site including loading, unloading andstacking as directed, laying paving blocks in positionover prepared bed of VSI crushed sand of 50 mmthickness including necessary excavation in allstratas, spreading blindge of fine sand over theprepared bed, compacting blocks by plate vibratoretc. complete |
| 14 | Transportation of Material obtained from debries ofvarious sorts including necessary excavation /loosing including loading,unloading and conveyingand disposing as directed |
