Tender For Construction Of Mahatma Phule Sabhamandap And Other Miscellaneous Works At Village Malpur Tal.Shindkheda Dist.Dhule
Tender Value
38.32 Lakhs
Estimated cost
Bid Submission
22 Jul 2024
0 days left
EMD
39000
Bank guarantee accepted
Document Fee
590
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Shindkheda → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Construction Of Mahatma Phule Sabhamandap And Other Miscellaneous Works At Village Malpur Tal.Shindkheda Dist.Dhule
BOQ
| Sl. No. | Item Description |
| 1 | Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removingtheexcavatedmaterialuptoadistanceof50meter beyondthebuildingareaand stackingandspreadingasdirected,dewatering,preparingthebedforthefoundationand necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 meter) By Mechanical Means |
| 2 | Excavationforfoundationinhardmurum includingremovingtheexcavatedmaterialupto distanceof50meter beyondthebuildingareaandstackingandspreadingasdirected, dewatering,preparingthebedforthefoundationandnecessarybackfilling,ramming, wateringincludingshoringandstruttingetc.complete.(Liftupto1.50meter)ByMechanical Means |
| 3 | ProvidingandlayingCastinsitu/ReadyMixcementconcreteinMix-10oftrap/granite/ quartzite/gneissmetalforfoundationandbeddingincludingbailingoutwater,Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided,finishingifrequiredandcuringcomplete,withfullyautomaticmicroprocessor based Programmable Logic Controller without Supervisory Control and Data Acquisition enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete.With fine aggregate (Crushed sand Vertical Shaft Impactor Grade) |
| 4 | Providing and laying in situ /Ready Mixcement concreteMix-20of trap / granite /quartzite/ gneiss metalforReinforced Cement Concrete work in foundationslikeraft,stripfoundations,grillageand footingsof Reinforced Cement Concrete columnsandsteelstanchions etc.including bailingoutwater, Steel centeringformwork,laying/pumpingcover blocks,compactionandcuring roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based Programmable Logic Controller without Supervisory Control and Data Acquisition enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand Vertical Shaft Impactor Grade) |
| 5 | ProvidingandlayingCastinsitu/ReadyMixcementconcreteMix-20oftrap/granite /quartzite/ gneiss metal for Reinforced Cement Concrete columns as per detailed designs and drawing or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surfaceor roughening if special finish is to be provided and curing etc. complete.(Excluding reinforcement and structural steel).with fully automatic micro processor based Programmable Logic Controller without Supervisory Control and Data Acquisition enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand Vertical Shaft Impactor Grade) |
| 6 | ProvidingandlayingCastinsitu/ReadyMixcementconcreteMix-20oftrap/granite /quartzite/ gneiss metal for Reinforced Cement Concrete beams and lintels as per detailed designs and drawings or asdirected includingsteelcentering,formwork,coverblocks,laying / pumping, compaction androugheningthesurfaceifspecialfinishistobeprovidedandcuringetc. complete. (Excluding reinforcement and structural steel). withfully automatic micro processor based Programmable Logic Controller without Supervisory Control and Data Acquisition enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand Vertical Shaft Impactor Grade) |
| 7 | ProvidingandlayingCastinsitu/ReadyMixcementconcreteMix-20oftrap/granite/ quartzite/ gneiss metal for Reinforced Cement Concreteslabs andlandingsasper detaileddesigns anddrawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based Programmable Logic Controller without Supervisory Control and Data Acquisition enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand Vertical Shaft Impactor Grade) |
| 8 | Providing and laying Cast in situ/Ready Mixcement concrete Mix-20 of trap/ granite/ quartzite/ gneiss metal for Reinforced Cement Concrete chajja as per detailed design and drawings including steel centering, formwork, cover blocks, laying/pumping, compacting androughening the surface ifspecial finish is to be provided and curing complete. (Excluding reinforcement and structural steel). withfullyautomaticmicroprocessorbasedProgrammable Logic Controllerwithout Supervisory Control and Data Acquisition enabledreversibleDrum Typemixer/ concreteBatchmixplant(Panmixer) etc. complete.Withfineaggregate (Crushed sand Vertical Shaft Impactor Grade) |
| 9 | ProvidingandlayingCastinsitu/ReadyMixcementconcreteinMix-20oftrap/granite/ quartzite/gneissmetalforReinforced Cement Concretepardiofrequiredthicknessincludingsteelcentering, formwork, cover blocks, laying/pumping, compacting , curing , finishing and rougheningthem ifspecialfinishistobeprovidedandcuringcomplete.(Excludingreinforcementand structuralsteel).withfullyautomaticmicroprocessorbasedProgrammable Logic Controllerwithout Supervisory Control and Data Acquisitionenabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand Vertical Shaft Impactor Grade) |
| 10 | Providing secondclassBurntBrickmasonrywithconventional/Indian Standardtypebricksincement mortar 1:6 in foundations and plinth of inner walls/ in plinth external walls including bailing out water manually , striking joints on unexposedfaces, raking out joints on exposedfaces and watering etc. Complete. |
| 11 | Providing andlaying Castinsitu/ReadyMix cement concrete Mix-15 oftrap/ granite/quartzite/gneissmetalforcoping to plinthorparapet,mouldedorchamferedasper drawingorasdirectedincludingsteelcentering,plywood/steelformworkcompacting, rougheningthemifspecialfinishistobeprovided,finishingunevenandhoneycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.) With fine aggregate (Crushed sand Vertical Shaft Impactor Grade) |
| 12 | Fillinginplinthandfloorswith approved excavatedmaterialin15 centimetre to20 centimetreLayers including watering and compacting etc. complete |
| 13 | Filling in plinth and floors with contractorsmaterial/brought from outside and approved by Engineerincharge inlayersof15 centimetre to 20 centimetre includingwateringandcompactionetc. complete. |
| 14 | Providingdry/trap/granite/quartzite/gneissrubblestonesoling 15 centimetre to20 centimetre thick including hand packing and compacting etc. complete. |
| 15 | Providing and fixing in position Thermo Mechanically Treated - Ferrous - 500 bar reinforcement of various diameters for Reinforced Cement Concretepilecaps,footings,foundations,slabs,beamscolumns,canopies,staircase,newels, chajjas,lintelspardis,copings,fins,archesetc.asperdetaileddesigns,drawingsand schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. |
| 16 | Providing secondclassBurntBrickmasonrywithconventional/Indian Standardtypebricksincement mortar1:6insuperstructureincludingstrikingjoints,rakingoutjoints,wateringand scaffolding etc. Complete |
| 17 | Providing secondclassBurntBrickmasonrywithconventional/Indian Standardtypebricksincement mortar 1:4 in half brick thick wall including mild steel longitudinal reinforcement of 2 bars of 6 millimetre diameter / 2 hoop iron strips 25 millimetre x 1.6 millimetre placedat every third course, properly bent and bonded at ends scaffolding, racking out joints and watering etc. complete. |
| 18 | Providinginternalcementplaster12 millimetre thickinsinglecoatincementmortar1:4without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete. |
| 19 | Providing andapplying Twocoats ofwall care Putty onplastered surface andCeiling and Walls to prepare surface even and smooth of approved make, etc complete. |
| 20 | Providing sand faced plaster externally in cement mortar using approved screened sand, in all positionsincludingbasecoatof15 millimetre thickincementmortar1:4usingwaterproofing compound at 1 Kilogram per cement bag curing the same for not less than 2 days and keeping thesurface of thebasecoatroughtoreceivethesandfacedtreatment6to8 millimetre thickin cementmortar1:4finishingthesurfacebytakingoutgrainsandcuringforfourteendays scaffolding etc.complete. |
| 21 | Providingandlayingtelephoneblack/AmbaWhite/Cadburybrown/Rubyred/Ocean Brown granite stone of 18 to 20 millimetre thick for door frame/ dado/ window boxing etc. on Cement Mortar 1:6 including filling joints with polymer base filler nosing/moulding the sharp edges wherever necessary, curing,etc. complete. |
| 22 | Providing and fixing frame with / without ventilator of size as specified with Country cut teak wood for doors and windows including chamfering, rounding, rebating, iron holdfast of size 300 millimetre x 40 millimetre x 5 millimetre with oil painting, etc. complete |
| 23 | Providing and fixing Country cut teak wood double or single leaf second class fully panelled door shutter with 35 millimetre thick style and rail with 25 millimetre thick panels with openable fan light as per detaileddrawings. Excluding the door frame 60 millimetre x 100 millimetre stainless steel fixtures andfasteningandfinishingthewoodworkwithoilpainting3coats.(Excludingthedoor frame) |
| 24 | Providing and fixing mild steel grill work for windows, ventilators, etc. 15 Kilogram per One Square Metreasperdrawingincludingfixturesnecessaryweldingandpaintingwithonecoatof anticorrosive paint and two coats of oil painting complete. |
| 25 | Providingandapplyingprimingcoatonconcrete/masonary/AsbestosCementplastered surfaces including scaffolding if necessary, preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering as required etc. complete. |
| 26 | Providing and applying plastic emulsion paint of approved quality, colour and shade tonew surface in three coats including scaffolding, preparing the surface. (excluding primer coat) etc. complete. |
| 27 | Providing and applying two coats of exteriorweather shield paint of approved manufacture andofapprovedcolourtotheplasteredsurfacesincludingcleaning,preparingtheplaster surface ,applying primer coat ,scaffolding if necessary, and watering the surface for two days etccomplete. NOTE: For Item One Number 15 to 18 prior approval of Superintending Engineer will be necessary |
| 28 | Providing and laying machine cut machine polished machine cut Kota stone slabs 20 to 25 mm thick for treads and risers of steps and staircases, with rounded nosing for the treads on a bed of 1:4 cement mortar including cement float, filling joints with neat cement slurry, curing, polishing and cleaning etc. complete. |
| 29 | Providing and fixing solid core flush door shutter in single leaf 32 millimetre thick decorative type of exterior grade as per detailed drawings approved face veneers 3 millimetre thick on both faces or as directed, all necessary beads, mouldings and lipping, wrought iron hold fasts, chromium platedfixturesandfastenings,withbrassmortiselock,chromiumplatedhandlesonboth sides, and finishing with French Polish etc. complete. |
| 30 | Providing and laying machine cut machine Polished Kota stone flooring 25mm to 30mm thick andrequiredwidthinplain/diamondpatternonbedof1:6C.M.including cementfloat, filling joints with neat cement slurry, curing, polishing and cleaningetc. complete. |
| 31 | Providing andfixing in required positionskirting or dado of polishedKotahStone slab25 millimetre to 30millimetre thickfixedonbase onplasterofcementmortar 1:4including cementfloat, filling joints with cement slurry, curing rubbing, polishing and cleaning complete. |
| 32 | Providing andfixing in position(as per 1868 / 1982) Alluminium sliding window of three tracks with rectangular pipe 95 x 38.10 x 0.90 millimetre at weight 0.637 Kilogram per One Running Metre with window frame bottom track section 92x 31.75 x 1.30 millimetre at weight 1.070 Kilogram per One Running Metre. Top and side track section 92 x 31.75 x 1.30 millimetre at weight 0.933 Kilogram per Runningmetre.Theshuttershouldbeof bearingbottom40x18x1.25 millimetre at weight 0.417Kilogram per One Running Metre.Inter locking section 40x 18x 1.10millimetre atweight 0.469Kilogram per Runningmetre.andhandleandtopsection40x18 x1.25 millimetre atweight o.417 Kilogram per Runningmetre.Asperdetaileddrawingsandasdirectedby Engineerincharge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 millimetrethickplainglassandaluminiummosquitonetshutterwithstainlesssteeljailwithall required screws and nuts etc, complete. With colour Anodising with box |
| 33 | Providing and fixing in position powder coated aluminium louvered windows / ventilator of varioussizeswithpowdercoatingasperdetaileddrawingandspecificationsincluding aluminiumframes80x38 millimetrex1.22millimetreboxtype,5millimetrethicksheetglasslouvers,of approved quality etc. complete. |
| 34 | Providing and fixing High Density Polyetheyne containerone piece moulded water tank made out oflowdensitypolythylerandbuiltcorrugationincludingofdeliveryuptodestination hoisting andfixing of accessories such as inlet, outlet overflow of alltanks capacityabove 1000 to 20,000 litres |
| 35 | ProvidingandconstructingBrickMasonryInspectionChamber60 centimetrex45 centimetrex90 centimetre including1:4:8cementconcretefoundation1:2:4cementconcretechannelshalfround G.S.W. pipes, Brick Masonry, plastering from inside and with frame fixed in cement concrete with Reinforced Cement Concrete Cover medium duty 140 Kilogram with frame etc complete. |
| 36 | Providingsoakpitofsize 120 centimetre x120 centimetre x120 centimetreincluding excavatingandfilling with brick-bats. |
| 37 | ProvidingandfixingOrissatypewhiteglazedearthenware575 millimetre waterclosetpan including S trap with earthenware foot rests, cast iron soil and vent pipe upto outside face of the wall 1:2:4 brick bat lime concrete bedding without flushing tank and its accessories etc. complete. |
| 38 | Providingandfixing75 millimetre diameter stabiliserpipe/Poly Vinyl Chloridesoilvent/wastepipeandwith necessary fixtures andfitting such as bends, tees, single junctions, slotted vent, clamps etc. complete |
| 39 | Providingandfixing100 millimetre diameter stabiliserpipe/Poly Vinyl Chloride soilvent/wastepipeandwith necessary fixtures andfitting such as bends, tees, single junctions, slotted vent, clamps etc. complete. |
| 40 | Providing and fixing on walls/ ceiling/ floor 25 millimetre diameter CPoly Vinyl Chloride pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in Public Works Department chowky or as directed etc. complete. |
| 41 | Providingandlayingintrenches25 millimetre diameter CPoly Vinyl Chloridepipeincludingnecessaryexcavation, fittings. Refilling trenches etc. complete. Including removing existing pipe line ifnecessary and conveying and stacking the same in Public Works Department chowky or as directed etc. complete. |
| 42 | Providing and fixing 10 centimetre Poly Vinyl Chloride nahani trap with grating etc. complete. |
| 43 | Providing and laying Antiskid Ceramic tiles of approved qualityof size 30 centimetre x 30 centimetre and confirming to Indian Standard: 15622-2006 (Group-B IIA) for antiskid flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with cement slurry cleaning curing etc. complete. |
| 44 | Providing and laying ceramic tiles having size 30 centimetre x 60 centimetre confirming to corresponding Indian Standard for dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry cleaning curing etc. complete. |
| 45 | Providing and fixing 15 millimetre diameter screw down bib/ stop tap of brass including necessary socket union nut complete. |
| 46 | Providing fine cementfinish1.5 millimetre thick overgreen plastersurface including scaffolding curing etc. complete. |
| 47 | ProvidingandfixingwhiteglazedearthenwareWashHandBasinof55 centimetrex40 centimetre size including cold water pillar tap/cold and hot water pillar tap brackets, rubber plugs and brass chain, stop tap and necessary pipe connections including Poly Vinyl Chloride waste pipe and trap up to the outside face of the wall. Making good the damaged surface, testing etc. complete. |
| 48 | Providing , laying and fixing ,jointingEco- drain 160 millimetre SN 4 Nu- Drain UPoly Vinyl Chloride pipes or of equivalent make, manufacture as per EN 13476 or equivalent as per I.S.15328 with fittings such abends,tees,coupler,etc,jointingwith rubberlubricantincludingnecessary excavation, trench refilling with selective excavated materialetc. complete. |
| 49 | Providing and fixing European type white glazed earthenware coupled closet symphonic trap withsymphoniclowlevelwhiteglazed10litrescisternwithblackbackliteseatwithall necessary pipe connection etc. complete. |
| 50 | Providing and fixing self supporting steel roofing systemfor a Godown or alike made up of structural grade steel sheet of 912 millimeter width ( tolerance +/- 2 millimeter ), moulded at site using mechanical press dies to the desired curve and shape to form 605 millimeter wide interlocking panels . The interlocking panels shall be pressed to close the seam forming water tight joints for a span of 15.30 meter having arch rise as 3.06 meter, arch length 17.75 meter. The base material made up of importedgalvalume steelcomplying to ASTM A792having base metal thickness of 0.80 millimeter ( tolerace + / - 0.02 millimeter ) with alloy coating AZ 150 and paint coating of regular modified polyster , top coat 25 micron and bottom coat 12 micron as per approved colour , including fixing hangers , clamps etc.as may be necessary of Proflex standard, including fixing sky light of 2 millimeter thick polycarbonate sheet of size 2\" x 7\" and turbo ventilator of 24\"\" diameter to be installed at every 30 feet along the length of roof including finishing, testing and cleaning etc. complete. |
| 51 | Providing and fixing collapsible steel gate in one / two leaves with hot rolled vertical channels of 18 x 9 x 3 millimetre minimum size, crossings of Mild Steel flats of size 18 x 5 millimetre T or E section for runner of minimum 40 x 6 millimetre size for flange, Mild Steel flat for top runner of minimum size 40 x 12millimetre withrollerwheelsconfirmingtogradeF.G.150fittedwithsnapheadedrivetsof minimum size 6 millimetre max. spacing of vertical channels be 100 millimetre enclosed gate position and clearspaceof150 millimetre betweentwosetsofcrossingswithholdfasts,stoppers,spaces, handles, locking arrangement and one coat of red lead primer and oil painting etc. complete. (I.S. 105211983). |
| 52 | Providing and fixing wall mixer with over head shower, shower arm, hand shower with wall bracket having flow rate up to 12 liters / minutes of Jaquar / Cera / Hindware / Perryware or equivalent make including all necessary pipes, fittings et-cetra complete as directed by Engineer In Charge. (Make shall conform to manufacturer\"s Green product and shall got approved from the Engineer In Charge.) |
| 53 | Providingandfixingmachinecutmirrorpolished18millimetre to20 millimetre thicktelephoneblack granite / Amba White / Cat bary brown / RBI red / Ocean Brown granite stone partition with full moulding the edges etc.complete . Both side polish |
| 54 | Providing and Fixing mat finish stainless steel (of 302 grade ) railing with toppipe of 50 millimetre diameter and vertical pipe of 38 millimetre diameter at 0.60 meter centre to centre or as required and horizontal pipes of 25 millimetre diameter in three rows, all pipes of 2 millimetre thick including buffing, fabricating fixtures and fastening including pipe base of appropriate diameter and ball base of 75 millimetre diameter above newel post of 75 millimetrediameteretc.complete(PriorapprovalofsampleandbrandbyEx.Engineeris necessary before use) |
| 55 | Providing andfixing 450 millimetre x550 millimetre size superiortype Belgium mirrorwith16 millimetrediameter nickel plated towel rod etc. complete. |
| 56 | Providing and fixing during laying in Rainforced Cement Concrete Slabrectangular 2 millimetre thickMild steel sheet fan hook box ofsize 180 x 100 millimetre with required depth with holes or notches as required, bottom and top sides of 1.6 millimetre Mild steel sheet fixed with 3.5 millimetre diameter round headed screws together with 12 millimetre diameter M.S. bar bent to shape with hooked ends for fan hook and painting to exposed surface |
| 57 | Providing andfixing 15 millimetre diameter Ball cock medium type with Poly Vinyl Chloride float including sockets and necessary fittings and tested as per municipal requirement etc. complete. |
| 58 | Providing and laying in position flooring of telephone black / Amba White / Cat bary brown / Rubyred / Ocean Brown granite stone of approved shade and size 18 millimetre to 20 millimetre thick on bed 1:6 cement mortar including cement floats striking joints, pointing in Cement Mortar 1:3 curing and cleaning etc. complete. |
| 59 | Providing and fixing board displaying information, such as \"Name of work, Tender cost, Name of Contractor, Work completion and liability period etc\", having rectangular shape of 1.20 meter x 0.90 meter size made out 18 gauge (1.25 millimetre) thick mild steel sheet painted with one coat of Zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border / messages / symbols etc. with approved colour shade paint complete, on Mild steel angle of size 35 x 35 x 3 millimetre frame with properly cross braced Mild steel angles of size 35 millimetre x 35 millimetre x 3 millimetre duly painted including Two Mild steel angle iron posts of size 65 millimetre x 65 millimetre x 6 millimetre, 3.65 meter long painted with alternate black and white bands of 25 centimetre width including all fixtures etc.and fixing the boards in 1:4:8 concrete block of size 60 centimetre x 60 centimetre x 75 centimetre including, excavation, refilling, transportation, and labour etc complete. Spec. No. As directed by Engineer in Charge |
| 60 | Providingandfixing90centimetrex60 centimetre Graniteplateengraving10 centimetre heightletter,figures including painting the lefters/figures with approved colour and shade complete |
| 61 | CementStandard consistancy, fineness, specific Gravity, Setting (Initial & Final) Compressive strength |
| 62 | Crushed metala) Water absorption, specific gravity, impact value, crushing value |
| 63 | b) Finness modulus (sieve analysis), silt & clay content |
| 64 | MurumLiquid limit & plastic limit |
| 65 | BricksWater absorption, compressive strength, Efflorescence |
| 66 | ConcreteCompressive strength of cement concrete cube (set of 3 cubes) |
| 67 | Steel bar testingUpto 16 millimetre (set of 3 bars) |
| 68 | Royalty charges for Sand |
| 69 | Royalty charges for other materials |
AI Tender Summary
Tender Timeline
Jul 15, 2024
11:30 IST
Tender Published
Tender notice published.
CompletedJul 22, 2024
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJul 24, 2024
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender