Tender For Proposed Construction Of Anganwadi Center At Kattukuppam In Division-02,Unit-01,Zone-01
Tender Value
2.85 Crore
Estimated cost
Bid Submission
17 Jul 2024
0 days left
EMD
28560
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
thiruvottiyur → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Proposed Construction Of Anganwadi Center At Kattukuppam In Division-02,Unit-01,Zone-01 => Limited
BOQ
| Sl. No. | Item Description |
| 1 | Earth work excavation for foundation in all kinds of soils invarying depths including dismantling any masonry or roots met with in foundation shoriEarth work excavation for foundation in all kinds of soils invarying depths including dismantling any masonry or roots met with in foundation shoring with planks and bailing water if necessary, clearing levelling the sitewith initial lead and including refilling the sides with excavated earth etc. complete |
| 2 | Supplying clean Crushed Stone Sand (Commercially called M- Sand) Sand sand and filling in regular layers of 15cm thick each including watering, consolidating etc. complete for foundation, basement, etc. |
| 3 | Plain Cement concrete work 1:4:8 (1 cement, 4 Crushed Stone Sand (Commercially called M-Sand) and 8 blue granite broken stone jelly 40mm gauge) including consolidation curing, etc. complete for foundation, etc. upto basement |
| 4 | Supplying and filling with earth up to 30 Km. for foundation and basement,etc.,including watering and consolidating,etc.,complete |
| 5 | Providing and laying in position,Standardised Concrete Mix M- 25 Grade in accordance with IS:456-2000,using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 350 kg/m3 and m,aximum water cement ration of 0.50, including admixture (Plasticiser/Superplasticier) in recommended proportions as per IS:9103 to accelerate ,retard setting of concrete,improve workability without impairing strength and durability with about (5.0 cum) 7730 kg of 20 mm machine crushed stone jelly and with about (3.3 cum) 5156 kg of 10-12mm machine crushed stone jelly and with about (4.79 cum) 7670 kg of sand, nut excluding cost of reinforcement grill and fabricating charges,centering and shuttering and also including laying,vibrating with mechanical vibrators,finishing,curing,etc and providing complying with standard specification and as directed by the departmental officers. The coarse and fine aggregates to be used should comply with the requirements of IS Standrands.(No separate payment will be made by the Department for the excess usage of materials) |
| 6 | Supplying mild steel rods upto 16mm dia including cutting bending hooks cranking fabricatingassembling and laying in exact position tieing with soft steel wire 16 or 18BWG etc. complete for all RCC works |
| 7 | Supplying and erecting shuttering including necessary supports for plane surface in foundation and basement for RCC column footings pintol blocks plinth beam staircase stepscritical stepscritical piers etc. using mild steel sheets of size 90x60cm and 10 gauge stiffened with welded mild steel angles of size25x25x3mm for boarding laid over silver Oak (country wood) joistsof size 10x6.5cm spaced at about 90cm centre to centre and supported by casuarina props of 10 to 13cm dia spaced at 75cmcentre to centre etc. complete.. |
| 8 | Supplying and erecting centering for sides and soffits including supports and strutting upto 3m high for plane surface such as RCCslabrectangular beamsTEESupplying and erecting centering for sides and soffits including supports and strutting upto 3m high for plane surface such as RCCslab rectangular beamsTEE orL beams lintels bedblocks staircase waists and landing slabslanding beamscanopy etc. with all cross bracings using mild steel sheets of a size 90x60cm and 10 gauge stiffended with welded mild steel angles of size 25x25x3mm for boarding laid over silver Oak(Country wood) joists of size 10x6.5cm spaced at about 90cm centre to centre and supported by casuarina props of 10 to 13cm dia spaced at 75cm centre to centre etc. complete. |
| 9 | Supplying and erecting centering for sides and soffits including supports and structting upto 3m high for plane surfaces such as RCC coloumns top and bottom slabs of boxing. sill labs sunshades etc. with necessary facia using mild steel sheets ofsize 90x60cm and 10 gauge stiffened with welded mild steelangles of size 25x25x3mm for boarding laid over silverOak(country wood) joists of size 10x6.5cm spaced at about 90cm centre to centre and supported by casuarina props of 10 to 13cm dia spaced at 75cm centre to centre etc. complete. |
| 10 | Brick work withbricks (9\"x4 3/8\" x 2 3/4\") second class chamber burnt G.M. in C.M.1:6 ( 1 cement and 6 Crushed Stone Sand (Commercially called M- Sand)) including curing, etc.,Complete,for 23cm thick walls upto basement (upto 1m high aboveG.L.). |
| 11 | Extra Labour for 11cm thick walls. |
| 12 | Plastering with cement mortar 1:3 (1cement and 3 Crushed Stone Sand (Commercially called M-Sand)) 10mmthick including hacking, curing,etc., complete for ceiling andother exposedRCC surfaces. |
| 13 | Plastering with cement mortar 1:4 (1 cement and 4 Crushed Stone Sand (Commercially called M-Sand))12mm thick including curing, etc., complete. |
| 14 | Painting the new plastered walls with two coats ofExterior emulsion paint (weather proof ) first class quality and of approved colour over a priming coat including thorough scrapping clean removal of dirt etc. complete and including necessary plaster paris putty etc.whereverrequired.as per (ISI STD) (It must provide excellent resistance against the growth of algaeandfungi on the walls.And it must offer excellent protection against alkali and UV degradation and the durability period should be 5 years.. |
| 15 | Painting two coats with ready mixed plastic emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping clean removal of dirt etc. complete and including necessary plaster paris putty wherever required.(ISI STD). |
| 16 | Providing and laying first quality Vertified tiles of all colours of size605mmx605mmx9.6mm in cm 1:312mm thick including pointing with white cement.LabourMaterialsetc. (Relevent ISI std). |
| 17 | Providing and laying first quality plain ceramic tiles of all colours of size 305mmx305mmx6mm set in C.M.1:3 12mm thick including pointing with white cement labour materials etc. (Relevant ISI.std). |
| 18 | Supplying and paving second quality colour glazed tiles 30x20cm x 6 mm with relevent ISI STD size of approved make set in C.M. 1:3 (1 cement and 3 river sand) 20mm thick and pointing with same colour cementpolishingclearingetc. complete.. |
| 19 | Paving the floor with polished Cat s Eye Granite slab(16 to 18mm thick) in floors in C.M. 1:3, 20mm thick over existingR.C.C. precast work table, etc., complete as directed by the Engineer-in-charge |
| 20 | Terrace flooring with one course of pressed tiles (with relevent ISI STD) 23cmx23cmx20mm using C.M. 1:3 etc. . |
| 21 | Terrace concrete work with broken brick jelly 20mm gauge in pure slacked lime 32:12.5(32 broken brick jelly 20mm gauge and12.5 lime) over RCC roof slab for required depth of 80mm for giving required slope and thickness to roof as required well beaten with wooden beaters etc. complete as directed during execution.. |
| 22 | PROTECTIVE PLASTERINGProviding protective over the water proofing treatment provided over base concrete,RCC retaining wall, sunken slab and terrace in CM 1:4 to a minimum thickness of 12mm with suitable admixture. |
| 23 | Supplying and fixing of M.S.Grills forWindows/Verandah/Ventilator s Grill of standard rectangular designusing 25mmx10mm M.S.Flats for outer frame and 20mmx5mm M.S.Flatsfor inner frame and for inner grill portion.The Vertical grillspacing should be 9.6cm. The centre portion spacing in between twogrills should be 14.5cm. 10 Nos of hold fasts of size 25mmx10mm forfixing the grill for Verandah and 8 Nos of hold fasts of size25mmx10mm for fixing the grill for Windows in the wall includingone coat of primer etc.complete. (As per sketch enclosed) andalso as directed during execution.. |
| 24 | Supplying and fixing M.S.Grill gate of required size in twoshutters with necessary iron membersgun metal cups and wheels75mm dia. with fittings locking arrangements etc. complete including painting a priming coat of approvedprimer etc. complete (The design of gate furnished is subject toalteration during execution.). |
| 25 | Stainless Steel Handrail 900mm high Providing and fixing stainless steel handrail 900mm high (as shownin drawing) made out of stainless steel conforming to SS 304 with 8pct.to8.5pct. nickel using 50.8mm outer dia at top (with 1.6mm wall thickness) and 38.10mm(1.6mm wall thickness) stainless steel pipe placed vertically at 1m centre to centre and two horizontal SS pipe 25.40mm outer dia (with 1.2mm wall thickness) welded at a distance of 300mm using TIG welding process with 308L SS electrode (in station building all flooor staircases) with necessary bends, flanges and base plates. Rate is inclusive of all materials, labours, lead, lift,etc. as directed by Engineer in-charge. |
| 26 | Supplying and fixing single leaf flush door 32/30mm thickness both side commercial ply and approved brand with T.W.frames of size 100x75mm at side verticals and top 6Nos.of iron hold fast fixed in C.C.1:2:4 and 3Nos.of butt hinges 125mm long including wind appliances furniture iron fittings 2Nos.of iron pad lock 15cm long for locking arrangements and fixed in position as directed during execution.(ISI STD). |
| 27 | Solid panel PVC door with frame Solid PVC door shutters using 19 gauge 19mm MS sq..tubes for styles and outer frames. 15mm MS sq.tubes for toplock and bottom rails.The steel tubes shall be covered with 5 mm thick solid PVC sheets. Shutter using 5mm thick solid PVC sheet for panelling shall rigidly fixed in position including necessary furniture and fittings.The over all size of styles shall be 50mmx30mm.The over all size of top raillock rail and bottom rail shall be 75mm x 30 mm.The over all size offrames shall be 50mmx45mmwith suitable rabate for housing the shutter.including labour charges etc.complete.as per ISI standard. |
| 28 | STEEL DOOR Fabricating Supply and fixing and position of MS doors with single leave. The door outer frame will be 40x40x6mm MS angle, the shutter frame will be 35x35x6 mm, MS angle intermediate stiffner will be 35x35x6 mm with cross stiffner 25x 25x5 mm flats covered with 18 gauge M.S. sheet with necessary hinges, tower bolts, aldrop length 30mm and hold fast etc., complete with one coat red oxide primer. |
| 29 | Painting new iron work two coats with ready mixed paint with relevent ISI STDof superior quality and approved colour.. |
| 30 | UPVC Window Specification:Supplying and fixing UPVC (Un- Plasticized Polyvinyl Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement withGI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm.The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and alsoit operates as handle.The corners and joints should be welded and cleaned.Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window.The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames.The window should be got approved from the Executive Engineer before use on work. |
| 31 | M.S. N TYPE VENTILATOR Fabrication, Supply a...ns after fixing as directed by the Board officers. |
| 32 | Paving the flooring with second quality special type of flooring tiles (coloured cement based hydraulically pressed Anti skid tiles) 20mm thick in C.M.1:3 20mm thick including pointing with colour cement etc complete (Relevant I.S.I std). |
| 33 | Construction of rack with RCC tiers at 0.4m intervels pre-castR.C.C. in cement concrete 1:1.5:3 ( 1 cement, 1.5 Crushed Stone Sand (Commercially called M-Sand) and 3 stone jelly 12m to 20mm thick gauge) with necessaryreinforcement forcach tier must be 0.04m thick and0.23 m projection from rear side wall. The rear side and bottom side of rack shall be of country (kilnburnt) third class brick work in C.M. 1:4 ( 1 cement and 4Crushed Stone Sand (Commercially called M-Sand)) 50mm thick, Each tier shall be inserted 40mm in brickpillar on each side. The brick pillar shall be in Second class chamber burnt T.M. brick work in C.M. 1:4 ( 1 cement and 4 Crushed Stone Sand (Commercially called M-Sand)), 11cm thick and project 0.23m from P.M. brick work (rear side) innerside and outer side must be plastered inC.M. 1:4 ( 1 cement and4 Crushed Stone Sand (Commercially called M-Sand)), 12mm thick and the entire rack shall be white washed three coats. (The rate inclusive of reinforcement) (ISI STD) |
| 34 | Supplying and fixing P.V.C. pipe 110mm dia rain water down fallpipe as per ISI standard (I.S.4985)including P.V.C.Bends withoutdoor arrangements shoesgratings with F.I.Clamps 40mmx20mm ofsuitable size fixed to wooden kplugs embeded in walls in cementmortar 1:3 (1 cement and 3 river sand including cutting holes inwalls and making good the same after fixing the plugs etc.complete as directed during execution.. |
| 35 | Supplying and Jointing 40mm dia P.V.C pipe.includingcutting threading and jointing with necessary specials fixing towall with clamps and screws including making holes in the wall ordrilling holes in roof and making good the wall or roof afterfixing with necessary scaffolding etc. complete. |
| 36 | Supplying and Jointing 25mm dia PVC pipe.including cutting threading and jointing with necessary specials fixing towall with clamps and screws including making holes in the wall ordrilling holes in roof and making good the wall or roof after fixing with necessary scaffolding etc. complete. |
| 37 | Supplying and Jointing 20mm dia PVC pipe.including cutting threading and jointing with necessary specials fixing to wall with clamps and screws including making holes in the wall or drilling holes in roof and making good the wall or roof after fixing with necessary scaffolding etc. complete.. |
| 38 | Supplying and fixing 40mm dia G.M.Gate valve. |
| 39 | Supplying and fixing 25mm dia G.M.Gate valve. |
| 40 | Supplying and fixing 15mm C.P flush cock. |
| 41 | Supplying and fixing chromium plated brass towel rail 60cm long. |
| 42 | Supplying and fixing chromium plated brass soap dish. |
| 43 | Supplying and fixing C.P.screw downtap of size 15mm |
| 44 | Providing and fixing 110mm dia PVC soil or vent pipe.with relevent ISI STD.. |
| 45 | Providing and fixing PVC slotted vent cowl of 110mm dia pipe. with relevent ISI STD.. |
| 46 | Boring using power rig 125mm dia upto hard formation and boring 100mm dia below this in rock formation. the entire column to be cleaned at site as directed including hire charges for the power rig for drilling the bore as described above both upto hard formation and then in rock formation (including the cost of fuel charges transporting to and from the power rig etc. complete.)including flushing the bore using compressor for a minimum time of 12 hours etc. complete providing the danger lights during night time etc. complete as directed during execution. |
| 47 | Supplying and lowering PVC pipe 125mm dia slotted casing pipe of 6kg/sq.cm. ISI Std. |
| 48 | Supplying and lowering PVC pipe 125mm dia plain casing pipe of 6kg/sq.cm. ISI Std. |
| 49 | Conducting yield test using v notch and with suitable pump for one day as directed during execution for the bore well. |
| 50 | Supplying and fixing 600x450x250mm kitchen sink white glazed with overflow arrangements with C.I. Brackets one No. of 32mm lead waste pipe (Bell mouth opening) for 75cm long 15mm dia wheel valve nuts etc.complete |
| 51 | Supplying and fixing 51cm colour glazed water closet pan with p or s trap including foot rests (colour glazed) and supplying laying 100mm diaS.W.P. concrete encasing theW.c.appurtenance etc. complete. |
| 52 | Providing and fixing white glazed Eruopen water closet with rose wood seatings (black) low level flushing tank with all internal fittings including jointing the trap with soil pipe witProviding and fixing white glazed Eruopen water closet with rose wood seatings (black) low level flushing tank with all internal fittings including jointing the trap with soil pipe with cement making holes in the walls screwsetc. complete as directed during execution.(ISI STD) |
| 53 | Supplying and fixing white glazed earthern ware wash basin of size 55x40cm of approved make with a pair of G.I.brackets15mm diaC.P.Pillar tap32mm C.P.waste fittings with rubber plugs andC.P.chain 32mm 75cm long P.V.C.waste pipe with necessary union solder joint 90cm long with 15mm lead and brass connections with brass nuts and 15mm dia G.M.wheel valve and giving necessary connection etc. complete including cost of white leadteakwood plugscrews rubber washers including painting two coats of approved make and colour paint over etc. complete. (wash basin should be got approved by the Buildings Engineer before use onworks). |
| 54 | Providing and fixing 75mm dia Nahini trap (floor trap) with brassgratings. |
| 55 | Construction of Inspection chamber of size 60x60x60cm with necessary earth work excavation, 40mm size brick jelly concretein C.M. 1:4:10 ( 1 cement, 4 Crushed Stone Sand (Commercially called M-Sand) and 10 broken brickjelly) stock brick work in C.M., 1:6 (1 cement and 6 Crushed Stone Sand (Commercially called M- Sand))for 23cm thick wall, benching, channelling and plastering,interior, exterior and top with C.M. 1:3 ( 1 cement and 3 Crushed Stone Sand (Commercially called M-Sand) Sandsand), 12mm thick and providing 7.5cm thick R.C.C. loose slabcovering in C.C.1:1.5:3 ( 1 cement, 1.5 Crushed Stone Sand (Commercially called M-Sand) and 3 bluegranite broken stone jelly of 12mm to 20mm size) with necessaryreinforecement and arrangements to lift for cleaning purpose,etc., complete. |
| 56 | Construction of Inspection chamber of size 60x60x120cm with necessary earth work excavation, 40mm size brick jelly concretein C.M. 1:4:10 ( 1 cement, 4 Crushed Stone Sand (Commercially called M-Sand) and 10 broken brick jelly) stock brick work in C.M. 1:6 (1 cement and 6 Crushed Stone Sand (Commercially called M-Sand)) for 23cm thick wall, benching, channelling and plastering, interior,exterior ,and top withC.M. 1:3 ( 1 cement and 3 Crushed Stone Sand (Commercially called M-Sand) Sandsand),12mm thick and providing 7.5 cm thick R.C.C. loose slab covering in C.C. 1:1.5:3 ( 1 cement, 1.5 Crushed Stone Sand (Commercially called M-Sand) 3 blue granite broken stone jelly of 12mm to 20mm size) with necessary reinforcement and arrangements to lift for cleaning purpose etc.,complete., |
| 57 | Construction of Inspection Chamber of size 60x60x150cm size withnecessary earth work excavation, 40mm size brick jelly concretein C.M. 1:4:10 ( 1 Cement 4 Crushed Stone Sand (Commercially called M-Sand) 10 broken brick jelly)stock brick work in C.M. 1:6 ( 1 Cement 6 Crushed Stone Sand (Commercially called M-Sand)) for 23cmthick wall, benching, channelling, and plastering, interior exterior, and top withC.M. 1:3 (1 Cement 3 Crushed Stone Sand (Commercially called M-Sand)) 12mm thick and providing 7.5cm thickR.C.C. Loose slab covering inC.C. 1:1.5:3 ( 1 Cement 1.5 Crushed Stone Sand (Commercially called M-Sand) 3 blue granite brokenstone jelly of 12mm to 20mm size) with necessary reinforcement and arrangements to lift for cleaning purpose etc., complete. |
| 58 | MODULAR WIRING with 2 x 1.5sqmm (22 / 0.3) PVC insulated SC unsheathed Cu. Conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with wallwith continuous earth wire connection of 14 SWG TC wire for making good ofthe concealed portion with suitable colour for PVC concealed light point / Fan point (For electronic regulator).( WIRING FOR MODULAR SWITCHES,MODULAR PLATE, MODULAR PLATED M.S BOX,MODULAR MCB shall be added)(For these accessories items, provision shall be made separately which are separately included in the schedule of rates from L432 TO L730 and L730 & L731) |
| 59 | Cost of supply of 18w 4 feet LED fitting with LEDtube complete set (Patty and LED tube) |
| 60 | Supply & Fixing of 48\" sweep size CEILING FAN of 5 Star Rated with double ball bearing , down rod, canopy complete set (with out speed regulator) ( ON EXISTING CLAMP WITH 300 MM DOWN PIPE ) |
| 61 | Supply and fixing of 300 mm (12\") sweep (light duty) AC exhaust fan complete with necessary wall opening and making good of the wall |
| 62 | MODULAR WIRING with 3x1.5sqmm (22/0.3) PVC insulat...hedule of rates from L432 TO L730 and L730 & L731) |
| 63 | Supply and fixing of 5A / 15 A 3 Pin combined flush type wall socket with 15A flush type switch concealed in suitable MS Box in flush with wall and covered with 3 mm thick hylem sheet |
| 64 | MODULAR WIRING with 2x1.5sqmm (22/0.3) PVC insulat...hedule of rates from L432 TO L730 and L730 & L731) |
| 65 | Wiring with 2x4 sqmm(56/0.3) PVC insulated SC unsheathed Cu.Conductor cable of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories, in flush with wall, with 150mm x 100mm x 113mm TW switch box with 3mm thick hylem sheet for 15 A 3 pin non inter locking CS socket with continuous earth wire connection of 14 SWG TC wire , and making good of the concealed portion, with suitable colour for concealed power plug point |
| 66 | LAYING OF CABLE ALONG ROAD / STREETTHROUGH 50mm O D, H.D.P.E. PIPE (TRENCH SIZE 45CM WIDTH X 75 CM DEPTH) |
| 67 | Earthing as per P.W.D standard with an earth electrode of 2 Mtr. Class B GI pipe of dia not less than 32mm complete with necessary masonry work |
| 68 | I.SI.MARKED 3 1/2X25 SQ.MM CABLE |
| 69 | I.SI.MARKED 4X16 SQ.MM CABLE |
| 70 | Clamping of3 1/2x 25 /4 x 25 sq.mm L.T UG Cabl on wall with MS Clamp |
| 71 | Clamping of4 x 16 sq.mm L.T UG Cabl on wall with MS Clamp |
| 72 | Supply and run of 1 of No.8 SWG GI wire for earth connection. |
| 73 | Supply of WT bulk head fitting with guard (Philips / Bajaj / Crompton / K. Lite) suitable for 9 W / 11W CFL lamp with CFL |
| 74 | Supply and run of 2 of 1.5 sqmm (22/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V Grade in rigid pipe concealed in wall and ceiling with continuous earth wire connection of 14SWG TC wire and making good of the concealed portion with suitable colour |
| 75 | Supply and run of 4 of 6 sq.mm (84/0.3) PVC insulated SC unsheathed Cu Conductor of 1100 V grade in suitable open PVC rigid pipe on wall and ceiling with continuous earth Wire connection of 14 SWG TC wire with painting of suitable colour. |
| 76 | Supply and run of 2 of 4sqmm (56/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V Grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection of 14SWG TC wire and making good of the concealed portion with suitable colour |
| 77 | Supply and run of 4 of 6 sq.mm (84/0.3) PVC insulated SC unsheathed Cu Conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection by 14 SWG TC wire and making good of the concealed portion with suitable colour |
| 78 | SUPPLY & FIXING OF 7 SEGMENTS ( 3 TIRE ) THREE PHASE MODULE TYPE WITH IP 42 PROTECTION 6 wayTPMCB sheet steel distribution board flush type / surface type fitted with bus bars and neutral links with single / three phase MCB out goings and separate 4 way provision for accommodating one no. of 4 pole incomming MCB Isolator and another separate 4 way provision for accommadating one no. of 4 pole ELCB / RCD [ totally 8 ways in one segment ] [ 3 x 4 ways in each segment ] and separate provision for MCB Isolator [ totally 12 nos. ] for sub incommers in 3 segments with lable holder and provisions for taking up cable for size not less than 35 sq.mm (NO OF INCOMER 12 WAY, NO OF OUT GOING 18 WAY)( WITH METAL / ACRYLIC DOORCOVER ) (seperateprovision shall be given forMCBs, Isolators, ELCB / RCD in Sch. No. L432 TO L457 and L730 &L731 ) {M.S Angle Iron of size 1 1/2\" x 1 1/2\" x 1/4\" Mounting} ( THE ABOVE D.B SHALL BE PRE WIRED WITH SUITABLE SIZE PVC COPPER WIRE ) |
| 79 | SUPPLY & FIXING OF 7 SEGMENTS ( 3 TIRE ) THREE PHASE MODULE TYPE WITH IP 42 PROTECTION 8 wayTPMCB sheet steel distribution board flush type / surface type fitted with bus bars and neutral links with single / three phase MCB out goings and separate 4 way provision for accommodating one no. of 4 pole incomming MCB Isolator and another separate 4 way provision for accommadating one no. of 4 pole ELCB / RCD [ totally 8 ways in one segment ] [ 3 x 4 ways in each segment ] and separate provision for MCB Isolator [ totally 12 nos. ] for sub incommers in 3 segments with lable holder and provisions for taking up cable for size not less than 35 sq.mm ((NO OF INCOMER 12 WAY, NO OF OUT GOING 24 WAY)( WITH METAL ACRYLIC DOORCOVER) seperateprovision shall be given forMCBs, Isolators, ELCB / RCD in Sch. No. L432 TO L457 and L730 &L731 ) {M.S Angle Iron of size 1 1/2\" x 1 1/2\" x 1/4\" Mounting} ( THE ABOVE D.B SHALL BE PRE WIRED WITH SUITABLE SIZE PVC COPPER WIRE ) |
| 80 | SUPPLY & FIXING OF VERTICAL THREE PHASE DISTRIBUTION BOARD MODULE TYPE WITH IP 42 PROTECTION 8 way TPMCBsheet steel distribution board flush type / surface type fitted with bus bars and neutral links with single / three phase MCB out goings and separate 4 way provision for accommodating one no. of 4 pole incomming MCB Isolator and another separate 4 way provision for accommadating one no. of 4 pole ELCB / RCD with lable holder and provisions for taking up cable for size not less than 35 sq.mm No. of ways out going 24way (WITH METAL DOORCOVER ) (seperateprovision shall be given forMCBs, Isolators, ELCB / RCD in Sch. No. L432 TO L457 and L730 &L731 ) {M.S Angle Iron of size 1 1/2\" x 1 1/2\" x 1/4\" Mounting} ( THE ABOVE D.B SHALL BE PRE WIRED WITH SUITABLE SIZE PVC COPPER WIRE ) |
| 81 | Single Pole 6 A to 32A, 10KA |
| 82 | Double Pole 6 A to 32A,10KA |
| 83 | 100 AF.PMCB ISOLATOR |
| 84 | 25 Amps 30 MA DP RCCB / ELCB |
| 85 | 40 Amps 30 MA DP RCCB / ELCB |
| 86 | 25 Amps 30 MARCCB / ELCB FP |
| 87 | 40 Amps 30 MARCCB / ELCB FP |
| 88 | Supplying and fixing of Frame fabrication with 1\"x1\" MS square tube with reflective and digital printing on 1mm GI sheets fitted with suitable aluminium beadings on four sides and painted etc., complete as per colour specifications instructed by Corporation officials. |
| 89 | Writing letters of 10cm size (in height) on any su... mixed superior paint of approved colour and make. |
| 90 | Writing letters of 20cm size (in height) on any surface with ready mixed superior paint of approved colour and make. |
| 91 | Art work as per the direction of department official, over Oil Paintingwith first class quality and approved colour including a priming coat with thorough scrapping clean removal of dirt., etc., complete and including necessary plaster ofparis, putty, etc., wherever required (Relevent ISI STD), including putty works. |
| 92 | Supplying and erecting HDPE plastic vertical cylindrical 2000 Litre Water Storage Tank.Strickly adhering ISI Standard as per ISI Mark 12701 (Latest revision) including all taxes and freight charges within Corpn.City limit. |
| 93 | Providing of Rain Water Harvesting struture using precast well ring size 1200 (inner dia) x 4500mm (Height) (300mm x 15Nos) x 80mm (thick) using 1:1.5:3 concrete necessary earth work excavation providing PCC 1:5:10 and RCC cover slab of 1680mm dia 180mm thick .Providing bore hole of size 300mm dia using hand bore set upto 8.50m depth including shifting of the hand bore from one place to another plac with in 5km, erecting 200mm dia slotted PVC pipe (6kg/cm2) with cowl, filling with 20mm HBG metal out side peripheral of the pipe including cost, conveyance, cleaning the site and finishing etc., complete. (SWD 22) |
| 94 | Supply and fixing of 20Amps DP Plug and Socket in sheet enclosure with 32A DP MCB in flush with wall with earth connection (For AC Plug) [ ISI marked / Reputedmake] |
| 95 | Supply & installation of Split type 1.5 TON Air conditioner ( 5 Star rating ) |
| 96 | 5kva stablizer of copper wound (Double Booster) |
| 97 | Out door angle for Split type Air Conditioner for all capacity ( if required ) |
| 98 | Fixing Irc Kerbs of Size 450X375X200 mm Including Earth Work And Fixing Proper Level And Alignment Incl.Pointing And Inserting The Joints With cm 1:3(6mm Thick) To Full Depth Curing Threadlining Etc.Complete(Excl. Cost of Kerb) |
| 99 | Supply and fixing of ARCH SEA SAW Sea saw made ofG.I.sheets with 2 Stainless Steel Pipes Boards to play 4 Children simultaneously. Seats made of fiber reinforced plastic. |
| 100 | Supply and fixing of Roller Slide Height 7ftabove the ground level and Width 20, Sliding chute 14ftfitted with rollers Area provided 5ft x 20ft All Stainless Steel Pipes etc., complete |
| 101 | MAIN PANEL INSTALLATION TESTING AND COMMISSIONING OF MEDIUM VOLTAGE FLOOR MOUNTING CUBIC TYPE DISTRIBUTIONJ BOARD SUITABLE FOR 415V, 3 PHASE 50HZ POWER DISTRIBUTION SYSTEM (32A X 4, 100AX4,63AX4) AS PER SPECIFICATION |
| 102 | S/F of furnitures |
| 103 | Landscaping |
AI Tender Summary
Tender Timeline
Jul 15, 2024
11:30 IST
Tender Published
Tender notice published.
CompletedJul 17, 2024
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJul 18, 2024
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender