|
| 1 | Dismantling clearing away and carefuly stacking materials useful for reuse the existing Brick/stone masonry under 3m wall high etc. complete as per the standard specification |
| 2 | Supplying and filling ofgravel by lorry in basement filling including stacking for premeasurement, conveyance loading and unloading charges and all other incidential charges and including filling laying watering and consolidating etc., complete as directed by the dept., Officers and complying with standard specification. |
| 3 | Brick work in following Cement Mortar 1:6 (one cement and six M.Sand) using best quality II class ground moulded chamber burnt bricks of size 9\" x 4-3/8\" x 2-3/4\" for foundation and basement including curing, etc., complete complying with standard specifiction. |
| 4 | In Ground floor |
| 5 | Renewing and fixing the following size of M.S Square / Rectangular hollow tubular sections of best variety and approved quality for purlins for fixing the colour galvanum sheet for roof including cutting the MS hollow tubular section to required size and placed in roof to required gradient and welded and providing necessary concrete for the hollow tubes embedded in the wall for rigiding by dismantling the brick masonry and redoing the same. The rate is inclusive of cost of square / Rectangular MS hollow tubular section labour charges for cutting welding and fixing in position one coat of red oxide primer and excluding cost of colour galvanum sheet aad all the incidental charges etc complete complying with standard specification and as directed by the departments officers. |
| 6 | Rectangular tube of size 100mmx50mmx4.00mm |
| 7 | Rectangular tube of size 75mmx50mmx4.00mm |
| 8 | Square tube of size 50mmx50mmx4.5mm |
| 9 | Supplying and fixing colour galvanum sheet 0.47mm thick for roofing of approved quality by drilling holes (and not by punching) with necessary \"J \" / \"U\" bolts and nuts of 8mm dia of suitable length and providing one set of bitumen washers of 25mm dia and 1.60mm thick for each bolt including protruding portion of bolts in roof shall be covered with bitumen compound etc., complete complying with standard specification and as directed by the departmental officers. |
| 10 | Supplying and fixing of weld mesh 7.5 x 2.5 cm 10 gauge including cutting the sheet to the required size found necessary during execution etc complete complying with standard specifications. |
| 11 | Repaving with Rubber Moulded hydraulically pressed cement concretepaver block with pattern design of 50% colour and 50% Plain of 83mm of approved quality and colour, with sand filling to full depth of slab perfectly and neat finishing the joints, compressing with vibrator. The rate shall be inclusive of cost of paver block, incidental charges, transportion charges and labour charges for fixing, neat finishing the joints as directed by the departmental officers etc., complete complying with standard specification. (The paver block should got approved by the departmental officers before use on work.) |
| 12 | Supplying and fixing ofnetlon door mesh with openable steel frame of size0.050x0.025 for Horizontal and vertical with cross beading of size 0.025mmx0.025mm for both side and centre portion filled with SS Netlon mesh and fitting the same in position . The cost includes transportation charges and all other incidental charges etc, complete. |
| 13 | Supplying and fixing in position best quality PVC Soil /waste pipe of various dia having 6 kg / sq.cm working pressure BIS mark and providing leak proof joints using PVC adhesive including fixing to the wall with special PVC/MS clamp, teak wood plugs, brass screws etc., and making connection to all sanitary fitting, dismantling masonry /RCC works wherever found necessary andmaking good the dismantled portion to the original condition including testing for any leakages, etc., complete complying with standard specifications. [The PVCpipe should be got approved by the Executive Engineer before use on works] The rate for earth work excavation will be measured and paid separately in the cases where the pipe lines are proposed to be laid below ground level |
| 14 | 110mm dia PVC Soil waste pipe |
| 15 | Plastering with Cement Mortar 1:5 (One cement and Five P.sand), 12mm thick with admixturein all floors including curing etc. complete complying with standard specification and as directed by the departmental officers. |
| 16 | Repainting two coats of oldplastered wall surface with ready mixed plastic emulsion paint of first class quality and of approved colourincluding thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification. |
| 17 | Painting new iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with two coats of best approved first quality and colour of synthetic enamel paint over one coat of red oxide oxide priming coat in all floors including cost of priming coat etc., complete complying with standard specification. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.) |
| 18 | Supply and fixing of 1200mm(48\") sweep AC ceiling fan complete with stepped electronic 300W regulator with 1 metre down rod with fan clamp with side plates and cross arm of size 450mm (18\") |
| 19 | Supply and fixing of single box type 1\"36W fluorescent fitting complete with electronic ballast with TW round blocks on wall or ceiling with flu tube with PVC unsheathed copper leads from terminals to the fitting. |
| 20 | SUB TOTAL |
| 21 | GST @ 18 % |
