Tender For Annual Maintenance Contract Of Durgapur Sub Divisional Hospital S And P Regular Maintenance Work (S And P) To Different Ward At Durgapur Sub-Divisional Hospital, Under Asansol Division, Pwd, 1 Dismantling And Refixing Bib Cock Or Stop Cock.

Sharing tender

tender for Annual maintenance contract Of Durgapur Sub Divisional Hospital S And P Regular Maintenance Work (S And P) To Different Ward At Durgapur Sub-Divisional Hospital, Under Asansol Division, Pwd, 1 Dismantling and refixing bib cock or stop cock. 2 Supplying, fitting and fixing low-down cistern parts.(i) Internal fittings for cistern complete of approved make. 3 Rubber Kid 4 Knob 5 Brackets (pair) 6 Supplying, fitting and fixing push cock of heavy quality and of approved make and brand.PTMT Push Cock (20 mm F/T) with spout ( Prayag or equivalent) 7 Dismantling wash basin with brackets with or without waste fittings. 8 Supplying, fitting and fixing white vitreous china best quality approved make wash basin with C.I. brackets on 75 mm X 75 mm wooden blocks, C.P. waste fittings of 32 mm dia., one approved quality brass C.P. pillar cock of 15 mm dia., C.P. chain with rubber plug of 30 mm dia., approvedquality P.V.C. waste pipe with C.P. nut 32 mm dia., 900 mm long approved quality P.V.C. connection pipe with heavy brass C.P. nut including mending good all damages and painting the brackets with two coats of approved paint.(i) 550 mm X 400 mm size 9 Supplying, fitting and fixing pillar cock of approved make. CP Pillar Cock - 15 mm. (Equivalent to Code No. 507 & Model - Tropical / Sumthing Special of ESSCO or similar brand). 10 Dismantling Indian W.C. including taking out base concrete as necessary. 11 Dismantling flush pipe of water closet. 12 Supplying, fitting and fixing E.W.C. in white glazed vitreous chinaware ofapproved make complete in position with necessary bolts, nuts etc.(a) With P trap 13 Supplying, fitting and fixing gunmetal wheel valve of approved brand and make testedto 21 kg per sq. cm. (for water lines only).(i) 40 mm dia 14 Hand Shower(Health Faucet) with 1mtr Fexible Tube with Wall Hook(Equivalent to Code No.573 & Model -ALLIED of Jaquar or similar). 15 Supplying, fitting and fixing 10 litre P.V.C. low-down cistern conforming to I.S. specification with P.V.C. fittings complete,C.I. brackets including twocoats of painting to bracket etc. 16 Supplying, fitting and fixing Flat back urinal (half stall urinal) in white vitreous chinaware of approved make in position with brass screws on 75 mm X 75 mm X 75 mm wooden blocks complete.(i) 470 mm X 280 mm X 340 mm 17 Supply of UPVC pipes (B Type) & fittings conforming to IS-13592-1992(A) (i) Single Socketed 3 Meter Length110 mm 18 160 mm 19 FittingsPlain Tee (a) 110 mm 20 (b) 160 mm 21 Bend 87.5º (a) 110 mm 22 (b) 160 mm 23 Labour for fitting and fixing U.P.V.C. pipes for above ground work including cost of jointing materials etc. fitting and fixing all necessary specials, cutting pipes, cutting holes in walls or R.C. floor where necessary and mending good all damages excluding the cost of masonry or concretework, if necessary, but including the cost and fitting and fixing holder bat clamps (any floor) or for underground work including cutting trenches upto 1.5 metre and refilling the same complete as per direction of the Engineerin-charge. (Payment will be made on centre line measurement of the total pipeline including specials.(A) Above ground(i) 110 mm dia. 24 (i) 160 mm dia. 25 Supplying, fitting and fixing PVC pipes of approved make of Schedule 80(medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads,fitting, fixing etc.complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separatepayment will be made for accesories, specials. Payment for painting willbe made seperately)(a) For Exposed Work PVC Pipes15 mm dia. 26 25 mm dia. 27 80 mm dia. 28 Renewing P.V.C. clip with necessary screws.(i) 15 mm 29 (ii) 25 mm 30 Cleaning silt of inspection pit. 31 Cleaning silt of master trap pit. 32 Removing sludge from septic tank, soak well etc. by methor labour including disposal of the same outside the compound as directed.Upto 100 users:- Beyond a lead of 150 metre and outside the Municipal limit 33 Cleaning rubbish, sludge, weeds scum, liquid earth, mud etc.etc.from roadside masonary drain/ hume pipe drain/ culvert etc. by mathor labour afterremoving concrete.Slab/manhole cover etc.without damaging the same andrefixing the same properly after cleaning as necessary and removing the sludge etc.etc.by using iron pans,buckets including all labour, tools & plants including removing the spoils in dry condition and disposing the same by truck beyond the road side in conformity withmunicipal/corporation rules for such disposal including loading into truckand cleaning the road side in all respects as per direction of the Engineerin-Charge. 34 Constructing Inspection pit of inside measurement 600mm X 600mm X upto 600mm (depth) with 250 mm thick 1st. class brick work in cement mortar (1:4) on all sides, bottom of the pit consisting of 100 mm thick cement concrete (1:3:6) with stone chips over a layer of jhama brick flat soling, 15 mm thick (1:4) cement plaster to inside walls and out-side walls upto G.L. and 20 mm.thick (1:4) plaster to bottom of the pit, providing necessary invert with cement concrete (1:3:6) with stone chips as per direction, neat cement finishing to entire internal surfaces, top of the pit covered with 100 mm thick R.C.C. slab (1:1.5:3) with stone chips and necessary reinforcements upto 1% and shuttering including 6 mm thick cement plaster (1:4) in all external surfaces of the slab and one 560 mm dia. R.C.C. manhole cover of approved make supplied, fitted and fixed in the slab with necessary fittings, necessary earthwork in excavation in all sorts of soil, filling sides of the pit with earth and removing spoils after work complete in all respect with all costs of labour and materials.With Pakur variety. (SAIL/TATA/RINL) 35 Supplying, fitting and fixing bib cock or stop cock.(a) (i) Chromium plated Bib Cock short body (Equivalent to Code No. 511& Model - Tropical / Sumthing Special of ESSCO or similar brand).15 mm 36 (ii) Polythene Bib Cock / Stop Cock with plastic inlet (EMCO / ATLAS or equivalent) 15 mm 37 Supplying, fitting and fixing alloy iron with brass spindle bib cock/ stop cock of approved brand and make, spray painted and tested to 21 kg per sq. cm.(i) 15 mm 38 Supplying,fitting and fixing approved brand P.V.C. CONNECTOR white flexible, with both ends coupling with heavy brass C.P. nut, 15 mm dia.(i) 450 mm long 39 Supplying, fitting and fixing in position R.C.C. Manhole/ pit cover of approved make with rim of approved make (Heavy type)(i) 450 mm dia. 40 Supplying, fitting and fixing Peets valve fullway gunmetal standard pattern best quality of approved brand bearing I.S.I. marking with fittings (tested to 21 kg per sq. cm.).(i) 50 mm dia 41 Supplying, fitting and fixing Squating plate with integral flushing in white vitreous chinaware of approved make in cement concrete (6:3:1) with jhama chips complete. (Payment of concrete will be paid seperately).(i) 450 mm X 350 mm 42 Supplying,fitting and fixing approved brand 32 mm dia.P.V.C. waste pipe, with PVC coupling at one end fitted with necessary clamps.(i) 1050 mm long 43 Add GST @18.00 % 44 AddLabour welfare Cess @1.00 %