Tender For Renovation Of Ward No: 14, Duraiyurladies Community Toiletin Chithode Town Panchayat.
Tender Value
7.50 Lakhs
Estimated cost
Bid Submission
19 Jul 2024
0 days left
EMD
15000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
chithode → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Renovation of ward No: 14, DuraiyurLadies Community Toiletin Chithode Town Panchayat.
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling of Damaged Plain Cement Concrete including cost of all materials to site and all labour charges etc., complete as per standard specification |
| 2 | Dismantling door and Windows including removal offrames, hings and fasteinngincluding cost andConveyance of all materials to site and all labour charges for filling etc., Complete. |
| 3 | Dismantling Floor finish & dadooing walls in cement mortar with Mosaic Tiles / Glazed Tiles / Clay Tiles / Cuddapah Slabsincluding cost andConveyance of all materials to site and all labour charges for filling etc., Complete. |
| 4 | Earthwork Excavation for foundation in all types of soils and sub soils including soft disintegrated rock and soft rock to the full depth including all leads and lifts etc., complete complying with the standard specification, drawing and as directed by the departmental Engineers. |
| 5 | Cement concrete of mix 1:4:8 (one cement – four sand – Eight broken stone) using Hard broken granite stone jelly of 40 mm gauge for foundation leveling course, standard specifications and drawings and has directed by departmental Engineers. Including cost and conveyance of all materials to working site, laying concrete and curing etc. |
| 6 | Brick work in cement mortar 1:5 (one cement five sand) using best quality country bricks including cost and conveyance of all materials to working site in super sector curing etc. complete. Complying with standard specifications and has directed by departmental Engineers. Including cost and conveyance of all materials to working site etc. |
| 7 | Plastering c.m 1:5(one cement and five sand) mix to a thick of 12mm using clean screened sand and including the cost of curing for 15 days from the completion of work and surface should free from undulations and including the cost of preparing the surface for plastering and protecting from other damages till setting of mortar etc complete complying as per MORTH Specifications. TNDSS No.56 & 57 |
| 8 | Plastering c.m 1:3(one cement and three sand) mix to a thick of 10mm using clean screened sand and including the cost of curing for 15 days from the completion of work and surface should free from undulations and including the cost of preparing the surface for plastering and protecting from other damages till setting of mortar etc complete complying as per MORTH Specifications. TNDSS No.56 & 57 |
| 9 | Floor finishing with ceromic tiles of 20cm x20 cmx 6mm finished thickness with c.m 1:3-20mm Tk and polished with same colorcement including all cost and convene of all materials etc.,complete |
| 10 | Dadooing of walls with colour glazed tiles of size 300x200x6 mm finished thickness with c.m 1:2- and polished with same colorcement including all cost and convene of all materials etc.,complete |
| 11 | Supplying and fixing in position of23\" sizecolour Orissa pan Indian Water closet of approved quality with S or P trap including fixing the same in position etc., completed. |
| 12 | Providing UPVC (Un-Plasticized Polyvinyl Chloride) Door: Providing and fixing casement doors fabricated from un-plasticized polyvinyl chloride (uPVC) sections. Profiles: The profiles should be three chamber system which provides high insulation properties with outer frame 60mm x 55mm with an outer wall thickness of 2.4mm. The window unit should be designed with all corner joints mitred and fusion welded. Windows should be steel reinforced with 25 x 24 x 25mm steel reinforcement with a thickness of 1mm to have dimensional stability. The sash should be of 60 x 102mm. The mullion should be of 60 x 74mm. The profiles should have co-extruded seals. Hardware: All the hardware like friction stays, handles should be screwed with self tapping screws. The handles, locks should be designed so that they cannot be released from outside.Glazing: The window system should be glazed with 5mm plain float glass / 6mm bison lam Installation: The profiles should be cut to length and welded 45 degrees. The window should be designed such that the water drainage does not pass through the reinforcement chamber. The window system should be fixed directly to the plastered brick wall using self expanding nylon plug and driving ms electroplated screws into plug.(SOR Item no.264,P.No.65) |
| 13 | Painting two coats ready mixed Approved Exteriar Emulsion of first quality and of approved colour over a primingcoat including through scarbing clan removel ofone coat of priming with best Cement paintas directed by the department officers etc completeand including necessary plaster of paris whever regd.(S.l.No.358) |
| 14 | Painting two coats with best-approved quality Colour Enamel paint for New Iron Works including cost and conveyance of enamel paint etc., Complete. |
| 15 | Supplying and fixing in position best Indian make white glazed earthenware WASH HAND BASIN of 560x406mm with a a pair of C.I. Brackets, 15mm dia C.P. Pillar tap, 32mm G.I. Waster water pipe, 32mm dia C.P. Brass waster coupling, plug with chain, 15mm dia PVC connection, 15mm G.M. wheel valve with ISI mark and necessary G.I. union and G.I. Elbow, including fixing wash hand basin in position with white lead, clamps, teakwood plugs, screws, rubber washer etc., complete without any leakage complying with standard specifications. |
| 16 | Wiring with 2 x 1.5 sq.mm. (22 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories and with TW switch box and 5A FT switch with painting of suitable colour for open PVC light point / fan point (for electronic regulator) (4 points per coil) (SD 17) |
| 17 | Supply and fixing of WT bulk head fitting with guard (Philps / Bajaj / Crompton / K. Lite) suitable for 11W CFL lamp with CFL. (SD 83) |
| 18 | Supply and fixing of 20W - 4ft LED fitting with LED with TW round blocks on wall or ceiling with flu tube with PVC unsheathed Copper leads from terminals to the fitting.(TWAD-SOR:2023-2024) |
| 19 | Supply and fixng of TNEB meter board suitable for 3 phase 63A service connection made up of suitable angle iron frame work of size 2 feet x 1-1/2 feet using angle iron of size 1-1/2\" x 1-1/2\" x 1/4\" rigidly fixed on wall covered with hylem sheet of size 2 feet x 1/2 feet of 6mm thickness with necessary bolts and nuts supports and supply and fixing of 3 Nos. 63A fuse units (500V), 1 No. neutral link, copper earth flat of size 1\" x 1/4\" with inter connection of EB meter to fuse units by 16 Sq.mm PVC insulated copper wire with earth connection complete (SD 129) |
| 20 | Supply and fixing of 25W LED Street Light Fitting With LED complete with 19mm dia GI pipe (Class \"B\") with 1 No. 19mm GI Bend complete on the existing post/wall with 16A aerial fuse unit on MS plate with PVC unsheathed Cu. leads, with MS clamps and aluminium painting. |
| 21 | supply and run of 4 x 6 sq.mm (56Nos/0.3mm.Dia) PVC Insulated Single core unsheathed copper conductor cable of 1100 V on 7/20 G.I bearer wire for service connection mains (SD 68) |
| 22 | supply and run of 4 x 4 sq.mm (84/0.3) PVC Insulated SC unsheathed cu. conductor of 1100 V grade in 25mm dia G.I pipe (\"Bclass) suitable bend at both ends with necessary angle iron up right and end supports for mains SD-73. |
| 23 | Supplying, fabricating and fixing in position factory made Stainless Steel Flush Door Shutter 35mm thick using SS 304 Grade 1.6 mm thick, Stainless Sheets on both sides (Equivalent to IS 6911-04 Cr. 19, Ni 9) minimum 8-8.5% nickel and 18% chromium sourced from original stainless steel manufacturer with view panel size 30mm x 45mm made up of 6mm thick clear toughened glass fitted with double side adhesive tape and finished with dowconing silicon sealant, floor spring for each shutter, consealed tower bolt, suitable stainless steel locking arrangement and other necessary furniture fittings of approved quality. The vertical styles and other frame members and cross stiffeners shall be of same quality stainless steel box section of suitable size and thickness with proper core material as prescribed by the Departmental Officers. |
| 24 | Supplying and fixing in position best Bevelled Edge MIRROR of 6mm thick of size 50cm x 40cm fibre glass shelf type with necessary plywood backing and rubber button, chromium plated screws, teakwood plugs, etc., complete complying with standard specification and as directed by the departmental officers. |
| 25 | Supplying and fixing in position best Indian make Aluminium anodised TOWEL RAIL of approved quality and size 60cm long and 20mm dia with brackets of same material including fixing with necessary teak wood plugs C.P. Screws etc., complete as directed by the departmental officers. |
AI Tender Summary
Tender Timeline
Jul 13, 2024
11:30 IST
Tender Published
Tender notice published.
CompletedJul 19, 2024
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJul 19, 2024
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender