|
| 1 | Dismantling stone slabs and tiles of any description or thickness, laid bedded and pointed in any mortar in floors, aprons etcall as specified and as directed. |
| 2 | Dismantling floor, hearth or wall tiling including cement mortar bedding (But not backing), removing and rubbish of the premisses, completeall as specified and as directed. |
| 3 | Taking down cement plaster on brick or stone walls, ceiling, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete , all as specified and as directed. |
| 4 | Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thickness (below or above ground level) complete , all as specified and as directed. |
| 5 | M&L for Non Skidceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, as in floors etc. set and jointed in neat cement slurry and including 15mm thick bedding layer in cement mortar (1:6) including necessary cutting and waste as per site requirement pointed in white or coloured cement to match complete all as specified and directed. |
| 6 | M&L for Non Skidceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, as in floors etc. set and jointed in neat cement slurry and including 15mm thick bedding layer in cement mortar 1:6 including necessary cutting and waste as per site requirement pointed in white or coloured cement to match complete all as specified and directed. |
| 7 | M&L for Non Skidceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, as in skirting, dado etc . set and jointed in neat cement slurry and including 10mm thick rendering in cement mortar (1:4) including necessary cutting as per site requirement complete all as specified and directed. including necessary cutting and waste as per site requirement pointed in white or coloured cement to match complete all as specified and directed. |
| 8 | S&F Coloured Glazedtiles 300x200x7mm thick, on walls/verticaletc. set & jointed in neat cement slurry & pointed in white or coloured cement to match over 10mm thick plaster in CM(1:4) on fair face of brick or concrete surface |
| 9 | M&L for Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing including 15mm thick screed bed in cement mortar 1:6including pointing in white cement 1:2 using marble dust with admixture of pigment to match with marble complete, all as specified. complete |
| 10 | M&L for Machine cut Kota stone slab flooring 20-25 mm thich laid over 20 mm thick cement screed bed in CM 1:6, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polioshing complete all as specified and directed |
| 11 | M & L for PCC 1:5:10 type E2 (using 40mm graded stone aggregate) as in, foundation filing and mass concrete. bed blocks, coping, lintels upto 1.5m span and similar work complete all as specified and directed. |
| 12 | M & L for rendering 15mm thick in CM 1:3 with water proofing compund on fair faces of brick on concrete slab & sides of sunken portion, finished even and smooth w/o using extra cement all as specified and directed |
| 13 | Supply only integral water proofing compound (ISI marked) all as specified and directed |
| 14 | M & Lfor applying evently a tack coat of industrial bitumen at the rate of 1.2 Kg per Sqm including cleaning surfaces all as specified and directed |
| 15 | M & L APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyester non woven fabric (wt not less than 150 gms/sqm) laid on primed surface by forced application complete all as specified |
| 16 | M&L for 25mm thick cement concrete 1:2:4 type B-0 (using 12.5mm graded crushed stone agg ) as in flooring, finished even & rough to receive floor finishes complete all as specified and directed. |
| 17 | M &L Rendering 10 mm thick on fair faces of brick or concrete surfaces in CM 1:6 and finished even and smooth without using extra cement (Internal surfaces) all as specified and directed |
| 18 | M&L for Rendering cement plaster 10mm thick in cement mortar 1:3 (1 cement : 3 coarse sand) on ceiling, surface finished even and smooth without using extra cement,complete all as specified and directed. all as specified. |
| 19 | M&L for Preparation of new plastered or unplastered surfaces of walls and applying two coats of oil bound distemper over a coat of primercomplete all as specified and directed. |
| 20 | M&L for Preparation of new plastered or unplastered surfaces and applying three coats of white wash on ceiling complete all as specified and directed. |
| 21 | S&Fin repair for Mild steel galvanised iron tubings (ISI Marked) 15mm dia medium grade with all fittings & fixtures complete to walls/ ceilings or laid in floorsincluding taking down complete all as specified and as directed. |
| 22 | S&F in repairfor Mild steel galvanised iron tubings (ISI Marked) 20mm dia medium grade with all fittings & fixtures complete to walls/ ceilings or laid in floors including taking down complete all as specified and as directed. |
| 23 | S & F 20mm bore Unplasticised PVC pipes including all fittings of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc.,complete and making good the area to match with existing surface, including taking down complete all as specified and as directed. |
| 24 | All as per item No 23 above,but 15 mm bore. |
| 25 | S&F in repair PVC bib taps PTMT (Symet) 15mm dia (Any Colour) screwed down for iron pipem or for brass ferrule all as specified and directed |
| 26 | S&F in repairs 15mm dia Pillar tap standard of PTMT any colourscrewed for iron pipe (minimum weight 15 mm -110 gm) all as specified and directed |
| 27 | S&F in repairs 15mm dia stop valve of PTMT any colour screwed for iron pipe and fixed (minimum weight 15 mm -90 gm) all as specified and directed |
| 28 | S&F in repairs 15mm dia angle valve of PTMT any colour screwed for iron pipe and fixed (minimum weight 15 mm -90 gm) all as specified and directed |
| 29 | S&F in repairs Swivel shower of PTMT any colour for fixing with 15 mm pipe ( minimum weight 40 gm) complete all as specified and as directed. |
| 30 | S&F in repairfor bib taps, cromimum plated cast copper alloy, screwed down, screwed for iron pipe of 15mm bore all as specified or as directed. |
| 31 | S&F in repair 15mm diachromium plated pillar taps, cast copper alloy with capstan heads screwed down high pressure, with or without lettered \"Hot\" of cold with long screed shanks and fly nuts screwed for iron pipe and fixed with crutch or butterfly handle, screwed both ends for iron pipe or for brass ferrule and fixed complete all as specified and directed. |
| 32 | S & F in repairs Brass chromium plated shower rose 125mm size swivel type complete all as specified and as directed. |
| 33 | S&F in repair for Stop valves/ angle valve, cast copper alloy, chromium plated, fancy type, screwed down,high pressure with crutch or butterfly handle,screwed both ends for 15mm bore iron pipe or for unions complete, all as specified and directed |
| 34 | S&F in repairfor Gun metal globe or gate valves (ISI-marked), cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or union of 20 mm bore , all as specified and directed |
| 35 | S & F in repairs Vitreous china squatting pan of \"Orissa\" patternof size 580x 440mm white with \"integral foot rests, complete incl provision of lime concrete bedding all as specified and directed |
| 36 | S & F in repairs Vitreous china water closet pan (pedestal pattern), white including fixing bolts, plastic water closet seat, black/white closed pattern with flat bottom and cover and mild steel chromium plated hinging device complete all as directed. |
| 37 | S & F in repairs PVC valve less flushing cistern syphonic action type, low level, inlet, ball valve, float & handle 10 litre capacity including brackets, flush pipe and all as specified and directed |
| 38 | S & F in repair vitreous chinaurinal bowl (back or corner wall type) type, white, including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including60mm long brass screws pointing around urinal back in cement complete all as specified and directed |
| 39 | S & F in repairs sinks with drainage board made of stainless steel sheet 1mm thick for kitchen fixed with plugs, washer and wastes, including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting unions to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm all as specified and directed |
| 40 | S&F in repair vitreous china wash basin (WHB) , white , flat back , size 550 mm x 400 mmexcluding supply of taps,but includingwaste fittings , brass Chromium plated for glazed basins etc. with long screw shanks and flt nuts , flange end embedded in red lead cement and other end fixed , chain and plug and porcelain stopper and brackets including cutting for and pinning in ends of brackets or erecting stand ,making connections to waste and supply pipes andcomplete all as specified and directed |
| 41 | S & F in repair 32mm bore PVC waste pipe for sink / wash basin 90cm long all as specified and directed |
| 42 | S & F in repairs plastic water closet seat cover,black or white closed pattern with flat bottom and cover and mild steel chromium plated hinging device all as specified and directed |
| 43 | S & F in repairs rotational moulded polyethylene water storage tank ( cylindrical vertical with closed top) hoisted and fixed in position of 500 litres capacity confiring to IS specification and incl Dismantling water tanks and removing to store all as specified and directed |
| 44 | All as per item No.43 above but 1000 ltr capacity |
| 45 | S & F in repairs 25mm bore, ball cock, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (minimum weight 455 gms) all as specified and directed |
| 46 | S & F in repairs 20mm bore, ball cock, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (minimum weight 455 gms) all as specified and directed |
| 47 | S & F in repairs PVC connections 15mm size with PTMT nuts of length 450mm all as specified and directed |
| 48 | S & F PVC (SWR) pipes in any length with or without ears, with rubber ring joints 75mm dia fixed to walls including taking down existing unserviceable pipes all as specified and directed |
| 49 | All as per item No.48 herebefore but 110 mm |
| 50 | S & F in repairs PVC (SWR) bends any radius 75mm bore all as specified and directed |
| 51 | All as per item No.50above but 110mm bore. |
| 52 | S & F in repair PVC (SWR) floor trap plain with grating including jointing with solvent cement of diameter of outlet 75mm dia complete all as specified and directed. |
| 53 | S & F in repairs of 2-in-1 faucet with 1.5m tube and hook all as specified and directed |
| 54 | S & F water storage tank lid fit for any sizes complete all as specified & directed. |
| 55 | S&F in repair brass chromium plated tubular towel rail, 20mm dia D type, 60cm long between flanges of cupboardall as specified and directed. |
| 56 | S&F in repairs Stainless steel plate rack of size 900X800X230mm with screws and necessary fittings incl cutting to hole fixed to wall complete all as specified and directed. |
| 57 | S&F in repair 600x450 mm bevelled edge mirror of selected quality glass mountedon 6mm thick AC building board or commercial plywood PVC moulded beading alround and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed |
| 58 | E & M Portion |
| 59 | S&F in replacement of Recess mounting LED backlit panel ceiling light environmental friendly new generation aesthetically designed ultra modern recess mounting luminaire with high brightness SMD LEDs as light source, LED backlit luminaire suitable for armstrong/grid ceiling complete for low ceiling applications 30/34 Watt LED (2\"X2\") complete with electronic driver, suitable for operation on AC, single phase , 220/230V , 50 Hz , including provision of suitable twin corecopper conductor PVC insulated , 1100 Volts grade cables not more than 5 m long and connecting up ceiling rose and fittings and testing ,all as specified and as directed. |
| 60 | S&F in replacement of Surface mounting LED backlit panel ceiling lightenvironmental friendly new generation aesthetically designed ultra modern surface mounting luminaire with high brightness SMD LEDs as light source, LED backlit luminaire with podwer coated white CRCA full glow backlit LED Panel complete for ceiling applications 30/34 Watt LED (2\"X2\") complete with electronic driver, suitable for operation on AC, single phase , 220/230V , 50 Hz , including provision of suitable twin core copper conductor PVC insulated , 1100 Volts grade cables not more than 5 m long and connecting up ceiling rose and fittings and testing,all as specified and as directed. |
| 61 | S&F in replacement of surface mounting LED backlit panel ceiling light4x1 environmental friendly new generation aesthetically designed ultra modern surface mounting luminaire with high brightness SMD LEDs as light source, LED backlit luminaire suitable for low ceiling applications 36/40 Watt LED (4\"X1\") complete with electronic driver, suitable for operation on AC, single phase , 220/230V , 50 Hz , including provision of twin core 2.5 Sq.mm copper conductor PVC insulated , 1100 Volts grade cables not more than 5 m long and connecting up ceiling rose and fittings and testing, all as specified and as directed. |
| 62 | S&F in replacement ofLED light fitting 1x16/20 Watt flame proof, CMRI certified recommended for gas/ vapor group of IIA & IIIB, Zone 1 & 2 and IP 65 protection with die cast aluminum housing with heat resistant toughened glass with LED tube light fixtures driver,holders, connector etc. Complete with all accessories prewired and including connecting up with three core flexible copper conductor cable with suitable size complete all as specified. |
| 63 | S&F in replacement ofLED tube light fitting 20/22 wattconnecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete with all fixing accessories all as specified and directed. |
| 64 | S&F in replacement ofLED tube light fitting 9/10 wattconnecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete with all fixing accessories all as specified and directed. |
| 65 | S&F in replacement ofLED Bulb 9/12/15 watt, B-22 base suitable for operation on AC, single phasecomplete all as specified and directed. |
| 66 | S&F in replacement of Decorative ECO bulkhead luminaire capacity 10 W, environmental friendly ultra modern energy saving surface mounted, LED luminaire comprising of high brightness and including connecting up with twin core twisted flexible copper conductor cable with suitable size of 230V, 50 HZcomplete all as specified and directed |
| 67 | S&F in replacement ofLED building security street light 25 W, made up of pressure die cast housing with toughed glass and individual high power LEDs with secondary optics, IP66 protection and impact resistance of IK07 incuding drivers, connecter block etc complete pre wired & connecting up with suitable twin core flexble copper wire and suitable bracket complete all as specified and directed |
| 68 | S&F in replacement ofFlood light luminaries LED energy saving 50 Watt, LED exlusive innovative designed, long life versatile pressure die-cast aluminium IP 65 flood light with high pressure die cast aluminium housing and impact resistant polycarbonate lens complete with all accessories and glass cover with suitable bracket or with grouted spring pressure fasterner/steel rawal plugs as directedincluding connection from juction box to lilght fittings with suitable twin core PVC insulated and unsheather, multi stranded FRLS copper conductor cable drawn in flexible conduit complete all specified and directed |
| 69 | S&F in replacement ofFlood light luminaries LED energy saving 100 Watt, LED exlusive innovative designed, long life versatile pressure die-cast aluminium IP 65 flood light with high pressure die cast aluminium housing and impact resistant polycarbonate lens complete with all accessories and glass cover with suitable bracket or with grouted spring pressure fasterner/steel rawal plugs as directed by Engineer in Charge including connection from juction box to lilght fittings with suitable twin core PVC insulated and unsheathed, multi stranded FRLS copper conductor cable drawn in flexible conduit complete all as specified and directed |
| 70 | S&F in replacement of LED energy saving High bay light fitting for capacity 150 watt, IP65 with high efficancy integrated electronic driver complete including connectionto light fitting with suitable size of connection cable complete with suitbale fixing arrangements of trusses controlled by one suitable MCB complete all as specified and directed. |
| 71 | Taking down carefully unserviceable point wiring copper / aluminium (light, fan, socket or power) complete, including removal of batten / conduit / gutties / wooden board etc., including fittings and fixtures such as switches, ceiling roses, regulators, sockets, light fittings, fans etc.,removal from site under Sch of credit and removal of unserviceable items out of site and making good the disturbed surfaces of walls, ceilings etc.,complete all as specified and as directed. |
| 72 | M&L Pointing wiring in Existing conduit with 1.5 Sqmm (nominal area) PVC insulated,(FRLS) unsheathed, multistranded, 1100 volts grade copper conductor cable single core, drawn through existing PVC/ steel heavy duty conduit 20 mm diaconduit including one run of 1.5 Sqmm PVC insulated copper conductor cable green in colour for continuous earthing, 1.6 mm thick MS terminal box finished to wall with 3 mm thick laminated hylam sheet top coverfor one light/fan/5 Amp socket all as specifiedand directed. |
| 73 | M&L Pointing wiring in Existing conduit with 4 Sqmm (nominal area) PVC insulated,(FRLS) unsheathed, multistranded, 1100 volts grade copper conductor cable single core, drawn through existing PVC/ steel heavy duty conduit 20 mm diaconduit including one run of 4 Sqmm PVC insulated copper conductor cable green in colour for continuous earthing, 1.6 mm thick MS terminal box finished to wall with 3 mm thick laminated hylam sheet top coverfor 15 Amp socket all as specifiedand directed. |
| 74 | S&F Switch piano flush type, single pole,5 Amps, 240 volts complete all as specified and directed |
| 75 | S&F Switch socket 3 pin 5 amps , multi pin , flush type,complete all as specified and directed |
| 76 | S&F Switch socket 3 pin 15 Amps, multipurpose, flush type complete all as specified and directed |
| 77 | S&F ceiling rose 65 X 50 mm , three terminals ,bakelite , surface complete all as specified and directed |
| 78 | S&F electronic fan regulator, flush type phenolic laminated sheet etc; all as specified and directed |
| 79 | S&F Switch flame proof rotary type with termination box in LM6, 16A, single pole 240V complete all as specified and directed |
| 80 | Taking down carefully Power / Sub main wirings with PVC aluminum conductor cables in PVC/STEEL conduits / TW battens up to 3 runs of 1.5/2.5/6 Sq.mm removing materials from site, taken ascredit ,making good thedisturbed surfaces all as specifiedand as directed. |
| 81 | M & L for sub main wiring in Existing steel conduit pipe with two runs of 1.5 Sqmm (nominal area) FRLSH ,PVC insulated, unsheathed, multistrand, 1100 volts grade copper conductor cable single core, one run of 1.5 sqmm copper conductor cable (green) as earth contunity conductor for flame proof fittings incl taking down unsv sub main wiring complete all as specified and directed. |
| 82 | M & L for sub main wiring in Existing steel conduit pipe with two runs of 2.5 Sqmm (nominal area) FRLSH ,PVC insulated, unsheathed, multistrand, 1100 volts grade copper conductor cable single core, one run of 2.5 sqmm copper conductor cable (green) as earth contunity conductorfor flame proof fittings incl taking down unsv sub main wiring complete all as specified and directed. |
| 83 | M&L in replacement of steel conduit 20/25mm dia ISI marked with all accessories to be fixed on wall/ceiling/roofcomplete all as specified and directed. |
| 84 | M&L in replacement of GI flexible conduit 20/25mm dia complete all as specified and directed. |
| 85 | Power / Sub-main wiring with PVC insulated unsheathed, FRLSH ,1100 volts, grade multistranded copper conductor, two runs of single core 6 sqmmconforming to IS-694, drawn through and includingsuitable dia rigid PVCconduit, conduit fittings and conduit accessories alongwith one run 6 sqmm PVC insulated single core multistrandedcopper conductorcable (green) asearth continuity conductor fixed on wall/ ceiling / roof trusses etc. and connecting tocommon earth dolly complete including taking down unserviceable submain wiring with accessories all as specified and as directed. |
| 86 | S&F in replacement of MCB DB SPN 8 way, doubledoor, powder coated, 240 volts, AC, 50Hz, IP 43 protected, with provision for MCBdouble pole as incomer andSP MCBs as outgoing with tinned copper bus bar, neutral link, earth linkand connecting up complete all as specified and as directed. Note : Incomingand Outgoing MCB measured separately relevent items. |
| 87 | S&F in replacement ofMCB DB TPN 4 way,distribution DB double door, powder coated, 415 volts, AC, 50Hz, IP 54 protected, fixed on wall semi flush with provision for TPN MCB 63 Amps as incomer and SP MCBs 40Amps as outgoing with tinned copper bus bar, neutral link, earth linkand connecting up complete all as specified and as directed. Note : Incoming MCB and Outgoing MCB measured separately relevent items. |
| 88 | S&F in replacement of Load line MCB DB TP&N 4 way, vertical, doubledoor, powder coated, 415 volts, AC, 50Hz, IP 54 protected, fixed on wall semi flush with provision for FP MCCB 100 Amps as incomer and SP MCBs 40 / 63 Amps as outgoing with tinned copper bus bar, neutral link, earth linkand connecting up complete all as specified and as directed. Note : Incoming MCCB and Outgoing MCB measured separately relevent items. |
| 89 | S&F MCCBs 100 Amps 415V,16KA, 4 Pole complete all as specified and directed |
| 90 | S&F in replacement of 240V, 10 KA \"B\" curve miniature circuit breaker (MCB) of single poles and current carrying capacity 6 to 32 AMP, in the MCB DB Complete with connection testing and commissioning complete all as specified and directed |
| 91 | S&F in replacement of 240V, 10 KA \"B\" curve miniature circuit breaker (MCB) of single poles and current carrying capacity 32/40 AMP, in the MCB DBComplete with connection testing and commissioning complete all as specified and directed |
| 92 | S&F in replacement of 415V 10KA \"B\" curve miniature circuit breaker (MCB) of TPN and current carrying capacity 63 Ampin the DB complete with connection testing and commissioning completeall as specified and directed |
| 93 | Material and labour for earth continuity conductor or main earthing lead fixed to valve on batten or recess or chases or burried in ground or drawing in conduit or any other situation for loop earthing etc as reqd 4 mm dia galvanized steel wire all as specified and directed |
| 94 | Earthing complete with galvanised iron earth plate electrode 600mm X600mm X 6mm thick, with and including earthing of 4mm dia GI wire protected by 15mm dia GI pipe light grade upto a length of 7.5m. The plate shall be buried directlyin ground vertically to a depth not lessthan2.25 metres below ground level with top edge of the earth plateat a depth not less than1.5 metres belowgroundlevel, connectedto earth leadasdescribedhere-in-beforebymeansofbolts,nuts, washers and checknuts made out ofgalvanised iron or mild steel, earthingleadprotectedby asdescribedhere-in-beforeand connected to main switch board or main control board or electric poleall asshownonelectricalplate No.3of MES Sch Part-Iincluding necessaryearth work and excavation in any type ofsoil,plain cementconcrete1:3:6,typeC1 chamber,reinforcedcement concretecover slab with locking arrangement and handle of 10mm dia MS round bars 450mm long, 1:2:4 type B1, 50mm thick with 8mm diaTMT barsat140mmcentreto centrebothways, GI pipe of bore 20mm medium grade for watering with funnel, wiremesh, salt, charcoal, lugsincluding testingand taking down old unserviceable earth pit complete all as specified and as directed. |
