Tender For Providing Laying And Jointing Of Different Size Of Pipe Line In Urban And Rural Water Supply Scheme Under Jurisdiction Of Division Malpura Under Annual Rate Contract
Tender Value
1.20 Crore
Estimated cost
Bid Submission
24 Jul 2024
0 days left
EMD
2.40 Lakhs
Bank guarantee accepted
Document Fee
3000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
malpura → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Providing Laying And Jointing Of Different Size Of Pipe Line In Urban And Rural Water Supply Scheme Under Jurisdiction Of Division Malpura Under Annual Rate Contract
BOQ
| Sl. No. | Item Description |
| 1 | Providing, lowering, laying in trenches, aligning, fixing in position and jointingDuctileIron(DI)ISI markedK-7 gradeS&Spipesas per IS:8329-2000 (amendedup todate),withinternalcementmortar liningsuitable forpotablewaterwithrubberring (EPDM) jointsas perIS:5382-1985includingalltaxes(Centralandlocal), transportation and freight charges, inspection charges, loading/ unloadingcharges, includingcostoflabourandmaterial,specials (Tee,bendetc.)satisfactoryhydraulictesting,disinfection, commissioning etc. complete as per technical specifications and direction of Engineer-in-charge. (excluding earth work)Note:Providingandfixingofallrequisitespecialsasperdrawing, design and layout are inclusive in RM measurement of the item and shall not be paid separately. |
| 2 | 80 mm |
| 3 | 100 mm |
| 4 | 150 mm |
| 5 | 200 mm |
| 6 | Providing, lowering, laying in trenches, aligning, fixing in position and jointing DuctileIron (DI) ISImarked K-9gradeS&Spipes asper IS:8329-2000 (amendedup todate),withinternalcementmortar liningsuitable forpotablewaterwithrubberring (EPDM) jointsas perIS:5382-1985includingalltaxes(Centralandlocal), transportation and freight charges, inspection charges, loading/ unloadingcharges, includingcostoflabourandmaterial,specials (Tee,bendetc.)satisfactoryhydraulictesting,disinfection, commissioning etc. complete as per technical specifications and direction of Engineer-in-charge. (excluding earth work)Note:Providingandfixingofallrequisitespecialsasperdrawing, design and layout are inclusive in RM measurement of the item and shall not be paid separately. |
| 7 | 100 mm |
| 8 | 150 mm |
| 9 | 200 mm |
| 10 | Providing, lowering, laying, aligning, fixing in positionand jointing at all level/ depths DI standard specials with rubber ring (EPDM)/ nut bolt and insertion sheet andjointingasperIS:9523- 2000 or as amended up to date,suchastees,bends, tapers,caps etc.withintrenches inDIpipe line completeincluding all material, labour, taxes, testingand commissioningalong with pipe line as per technical specifications anddirection of Engineer-in-charge (excluding earth work). |
| 11 | All End Socketed |
| 12 | Up to 300 mm Diameter |
| 13 | All End Flanged |
| 14 | Up to 300 mm Diameter |
| 15 | Single Flange/ MJ Collar |
| 16 | Up to 300 mm Diameter |
| 17 | Providing,lowering,layingandjointing intrenches, standard lengths HDPEISI marked Pipes as per IS-4984: 1995 (amended up to date) withnecessaryjointingmateriallikemechanicalconnectors,i.e.thread/insertjoint/quickreleasecouplerjoint/compression fittingjointorflangedjointandspecialsjointingpipeby electro fusion welding method, including all taxes , transportation and freight charges, inspection charges, loading/ unloading charges, stacking of pipes, including cost of labour and material, specials (Tee, bend etc.), satisfactory hydraulic testing, disinfection, commissioning etc. complete as per technical specifications and direction of Engineer in-charge of following class and diameter. (excluding earth work) . Note:Providingandfixingofallrequisitespecialsasperdrawing, design and layout are inclusive in RM measurement of the item and shall not be paid separately.Supply may be in coil or straight length in 6 M/12 M. |
| 18 | HDPE PE-80PN-6 |
| 19 | 63 mm dia |
| 20 | 75 mm dia |
| 21 | 90 mm dia |
| 22 | 110 mm dia |
| 23 | HDPE PE-100PN-6 |
| 24 | 63 mm dia |
| 25 | 75 mm dia |
| 26 | 90 mm dia |
| 27 | 110 mm dia |
| 28 | HDPE PE-80PN-10 |
| 29 | 90 mm dia |
| 30 | 110 mm dia |
| 31 | HDPE PE-100PN-10 |
| 32 | 90 mm dia |
| 33 | 110 mm dia |
| 34 | Providing,lowering,layingandjointing intrenches, standard lengths HDPEISI marked Pipes as per IS-4984: 1995 (amended up to date) withnecessaryjointingmateriallikemechanicalconnectors,i.e.thread/insertjoint/quickreleasecouplerjoint/compression fitting joint or flanged joint and specials jointing pipe by butt fusion/ electrofusionweldingmethod,includingalltaxes,transportation andfreight charges, inspectioncharges, loading/unloading charges, stacking of pipes, including cost of labour and material, specials (Tee, bend etc.), satisfactory hydraulic testing, disinfection, commissioning etc. complete as per technical specifications and direction of Engineer in-charge of following class and diameter. (excluding earth work). Note:Providingandfixingofallrequisitespecialsasperdrawing, design and layout are inclusive in RM measurement of the item and shall not be paid separately.Supply of pipe shall be in straight length in 6/12 M. |
| 35 | HDPE PE-80PN-6 |
| 36 | 125 mm dia |
| 37 | 140 mm dia |
| 38 | 160 mm dia |
| 39 | 180 mm dia |
| 40 | 200 mm dia |
| 41 | HDPE PE-100PN-6 |
| 42 | 125 mm dia |
| 43 | 140 mm dia |
| 44 | 160 mm dia |
| 45 | 180 mm dia |
| 46 | 200 mm dia |
| 47 | HDPE PE-80PN-10 |
| 48 | 125 mm dia |
| 49 | 140 mm dia |
| 50 | 160 mm dia |
| 51 | 180 mm dia |
| 52 | 200 mm dia |
| 53 | HDPE PE-100PN-10 |
| 54 | 125 mm dia |
| 55 | 140 mm dia |
| 56 | 160 mm dia |
| 57 | 180 mm dia |
| 58 | 200 mm dia |
| 59 | Providing and fixing of flanged/ plain ended MS Specials made from MS sheet strips of relevant IS specification of approved thickness by welding,lowering,laying,aligning,fixinginpositionatalllevel/ depthsintrenchescompleteincluding alltaxes,material, labour, inside lining, outside coating, testingandcommissioning alongwith pipelineaspertechnicalspecifications anddirection of Engineer in-charge. |
| 60 | MS pipespecialsup to600mmdia (withminimum5mmthicknesssheet) |
| 61 | Laying, Jointing, Testing and Commissioningof Ductile Iron (DI) Pipes of any class in assorted length with specials, valves etc. including local handling and transportation from PHED store and then refilling of soil with proper compaction and disposing of all surplus soilas directed with in a lead of 30 mtr as per satisfaction of EIC. (Rates are Exclusive of Earth Work and jointing materials) |
| 62 | 80 mm |
| 63 | 100 mm |
| 64 | 125 mm |
| 65 | 150 mm |
| 66 | 200 mm |
| 67 | Laying,Jointing,TestingandCommissioning ofHDPEpipesofany gradein assorted length with specials, valves etc. with jointing material/ fixing of necessary jointing material like mechanical connector i.e. thread/ insert joint/quick release coupler joint compression fitting joint or flanged joint and jointing pipe in proper positionandjointingofallspecialsbybuttfusion/electrofusion weldingmethod,includinglocalhandlingandtransportationfrom PHEDstoreandthenrefillingofsoilwithpropercompactionand disposing of all surplus soil as directed with in a lead of 30 mtr as per satisfactionofEIC.(RatesareExclusiveofEarthWorkandjointing materials) |
| 68 | 90 mm |
| 69 | 110 mm |
| 70 | 125 mm |
| 71 | 140 mm |
| 72 | 160 mm |
| 73 | 180 mm |
| 74 | 200 mm |
| 75 | Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in trenches of required width and gradient for laying and jointing of pipe line including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5 Mtr. including taking out the excavated soil, and then returning the soil as required in layers not exceeding 20cm in depth including consolidating each deposited layer by ramming, watering etc. and disposal of surplus excavated soil as directed within a lead of 50 Mtr. including required all safety provisions etc.:All kinds of soil |
| 76 | Add extra for trenches for every additional lift over item no 4.1 |
| 77 | Above 1.5 mtr and up to 3.0 mtr. |
| 78 | Dismantlingofcementconcretepavementforpipeline andchambersby mechanicalmeansusingpneumatictools,cuttingtheperipheraledgebyCC cutter, breaking to pieces not exceeding 0.02 cum in volume and stock piling at designated locations and disposal of dismantled materials up to a lead of 1000 meters.Measurementfordismantledtrenchtobemade asperstandard trenchwidthspecifiedintenderdocumentandnoextrapaymentshallbe made be made for trench width more than specified, re-handling of material/earth to complete the tasks as per technical specification and scope of work. |
| 79 | Dismantlingofflexiblepavementforpipeline andchambersbymechanical meansusingpneumatictools,breakingtopiecesnotexceeding0.02cumin volumeandstockpilingatdesignatedlocationsanddisposalofdismantled materials up to a lead of 1000 meters. Measurement for dismantled trench to bemade asper standardtrench widthspecified intender documentand no extra payment shall be made be made for trench width more than specified, re handlingofmaterial/earthtocompletethetaskspertechnicalspecification and scope of work. |
| 80 | Bituminous courses |
| 81 | Granular courses |
| 82 | Providing and laying in position cement concrete M10 grade nominal mix 1:3:6 (1 Cement : 3coarse sand : 6 graded stone aggregate 40 mm nominal size) in base course complete including all material, labour, machinery, lighting, guarding for road restoration work in trenches of pipe line and chamber work. Measurement for CC work to be madeas per standard trench width specified in tender document and no extra payment shall be made be made for trench width morethan specified, completeworkasper technicalspecification and scope of work. |
| 83 | Providingandlayinginpositioncementconcreteinspecifiedgradeover prepared base course complete including finishing, curing, all material, labour, machinery, lighting, guarding for road restoration work in trenches of pipe line andchamberwork.MeasurementforCCworktobemade asperstandard trenchwidthspecifiedintenderdocumentandnoextrapaymentshallbe madebemadefortrenchwidthmorethanspecified, completeworkasper technical specification and scope of work. |
| 84 | M20 grade Nominal Mix1: 1.5: 3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size). |
| 85 | Providing, lowering,aligning, fixing inposition inpipe line, CI D/F Sluice valves straightandpocketlessbodypassageofapprovedmakeof following Pressure rating & dia complete, confirming to IS:14846 (amended up to date) and of following specifications: Body, Bonnet, Wedge, Gland, Thrust Plate, Cap & Hand wheel of Grey cast iron of IS:210/ FG200Stem - AISI- 410 ,Body Seat ring, Wedge facingring&Bushes-LTB2/SS ,FacetofacedimensionsasperIS14846/2000 (amendeduptodate),Epoxy(Non-Toxic-suitablefordrinkingwater)applied inside and outside,Flanges Drilled as per IS 1538. Nut-Bolt confirming to IS:1363 andIS:1367/CS/galvanisedsteel InsertionrubberofblackEPDM6mmthick. Sluice valves including all jointing & jointing material, labour, testing and commissioningalongwithpipelineasperTechnicalSpecificationsandasper direction of Engineer-in-charge.Note: Rates are exclusive of tail piece/ dismantling joints and earth work. |
| 86 | Manually Operated CI Sluice valve of Class PN-1.0 |
| 87 | 80 mm HW |
| 88 | 100 mm HW |
| 89 | 125 mm HW |
| 90 | 150 mm HW |
| 91 | 200 mm HW |
| 92 | Providing, lowering, aligning, fixing in position in pipe line, CIdouble flangedDual plate check valve of approved make of following Pressure rating & dia complete, asperAPI:594/API:598andoffollowingspecifications: Body&CoverofGrey cast iron ofIS:210/ FG200 , Disc / plates - Cast steel ,Disc seal ring of EPDM/ NBR (foodgradequality),BodyseatofSS,FacetofacedimensionsasperAPI:594,FlangesDrilledasperIS:1538. Epoxy(Non-Toxic&suitablefordrinkingwater) applied on body & coverinside and outside . Shaft/Stop Pin of SS- AISI- 304/410 , Hinge SS AISI 316/304 / CS ,Spring SS AISI 316/304 , Bonnet Gasket EPDM ,Bush- BrasswithEPDM/NBR\"O\"ringseal.Nut-BoltconfirmingtoIS:1363andIS:1367 (galvanisedsteel),InsertionrubberofblackEPDM6mmthick.Suitable support structureasperdirectionsofEIC includingjointing&jointingmaterial,labour, testing and commissioning along with pipeline as per Technical Specification & as per direction of Engineer-in-charge.Note: Rates are exclusive of tail piece/ dismantling joints and earth work. |
| 93 | Class PN 1.0 |
| 94 | 80 mm dia |
| 95 | 100 mm dia |
| 96 | 125 mm dia |
| 97 | 150 mm dia |
| 98 | 200 mm dia |
| 99 | Providing, lowering, aligning, fixing in position and Jointing in pipe line, CI single Air ValveFlanged/ Screwed type of approved makes for following pressure rating & dia complete, confirming to IS: 14845-2000 (amendedup to date) and of following specifications: Body , Cover and Cowl - Grey Cast Iron as per IS:210- FG 200 ,Float StainlessSteelAISI304/IS:3444,FloatGuide-HBT1,Bodyseatring-Leadedtin bronze/ SS , Seal ring and face ring - EPDM/NBR, Ends flanged according to IS 6418 orScrewed type shall have external pipe threads conforming to IS 554Fasteners - CSEpoxypaintinsideoutsideoffoodgradesafefordrinkingwater,Valves including all material, labour, testing and commissioning as per Technical Specifications and as per direction of Engineer in charge.Note: Rates are exclusive of connecting tee, pipe piece and earth work. |
| 100 | Class PN 1.0 |
| 101 | 15 mm S-1 Type |
| 102 | 25 mm S-1 Type |
| 103 | 40 mm S-1 Type |
| 104 | 50 mm S-2 Type |
| 105 | ConstructionofRCCSluicevalvechamberfordifferenttypeofvalves includingearthworkexcavation,100mmPCCM15 aslevellingcourse, RCC M25 grade for base slab, side wall & cover slab , including cost of steelreinforcement,formwork,Pre-castslabs,plasticencapsulated CI/MS Foot Rest, MS flats for the support of pre-cast, proper curing of concrete work complete in all respect as perspecifications andstandard drawings and as per direction of Engineer-in-Charge. |
| 106 | For Class-A loading |
| 107 | Sluice valve chamber of size1.13m x0.85m x1.27mfor pipe size-upto100mm |
| 108 | Sluice valve chamber of size1.17m x0.95m x1.415mfor pipe size-from 125-to-150mm |
| 109 | Sluice valve chamber of size1.26m x1.185m x1.82mfor pipe size-from 200-to-300mm |
| 110 | ConstructionofRCCAirvalvechamberfordifferenttypeofvalves includingearthworkexcavation,100mmPCCM15 aslevellingcourse, RCC M25 grade for base slab, side wall & cover slab , including cost of steelreinforcement,formwork,Pre-castslabs,Plasticencapsulated CI/MS Foot Rest, MS flats for the support of pre-cast, proper curing of concrete work complete in all respect as perspecifications andstandard drawings and as per direction of Engineer-in-Charge. |
| 111 | For Class-A loading |
| 112 | Air valve chamber of size0.9m x1m x1.71mfor air valve size-from 50 mm-to-80mm |
| 113 | Air valve chamber of size1m x1.1m x1.96mfor air valve size of 100mm |
| 114 | Air valve chamber of size1.05m x1.4m x2.42mfor air valve size of 150mm |
| 115 | Air valve chamber of size1.325m x1.7m x2.9mfor air valve size of 200mm |
AI Tender Summary
Tender Timeline
Jul 12, 2024
11:30 IST
Tender Published
Tender notice published.
CompletedJul 24, 2024
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJul 25, 2024
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender