tender for Internal Electrification In Different Buildings And Con. Of Ht/Lt Line Doubel Pole Structure 250 Kva Transformer Street Light On Pole Sitc Of 2 No 16 Mtr High Mast Light System And S/F Over Head And Catiliver Retro Ref Sign Bord At Smy Mahrajganj, Internal Electrification in Office Building, Check Post, Toilet Block, Bank Building, B Type Shops-10 Nos, C Type Shops-10 Nos., A.P.F.(12x78) -1 No in Grain Mandi and C Type Shops-10 Nos., A.P.F.(12x60) -2 Nos in Fruit & Vegetable Mandi with Gate Light etc. works, Construction of H.T/LT Line , Double pole structure. 250 KVA Transformer S/F of LED street light, S/I/T/C of 02 Nos. 16 mtr. Highmast Lighting System with 200w LED flood light AND S/F Overhead andCantilever Retro Reflective Sign board and Signage BoardatS.M.Y. Maharajganj (Partawal) Sl. No. Item Description 1 BILL OF QUANTITY Part A-Internal Electrification in Office Building, Check Post, Toilet Block, Bank Building, B Type Shops-10 Nos, C Type Shops-10 Nos., A.P.F.(12x78) -1 No in Grain Mandi and C Type Shops-10 Nos., A.P.F.(12x60) -2 Nos in Fruit & Vegetable Mandi with Gate Light etc. works at S.M.Y. Mahrajganj (Partawal)Wiring point for light with 1.5 sq. mm FR PVC insulated multistrand single core copper conductor cable in heavy gauge rigid steel conduit pipe concealed in wall, complete with 14 SWG copper earth continuity wire, GP box, modular type switch & ceiling rose/angle/batten holder fixed on 3 mm thick phenolic laminated bakelite sheet etc complete in all respect, as directed including matching colour wash. (S.I. No. 138 C + 187 A) 2 Wiring point for fan with 1.5 sq. mm FR PVC insulated multistrand single core copper conductor cable in heavy gauge rigid steel conduit pipe concealed in wall, complete with 14 SWG copper earth continuity wire, GP box, modular type switch & ceiling rose/angle/batten holder fixed on 3 mm thick phenolic laminated bakelite sheet etc complete in all respect, as directed including matching colour wash ( S.I. No.140 C + 187 A) 3 Wiring point for plug with 1.5 sq. mm FR PVC insulated multistrand single core copper conductor cable in heavy gauge rigid steel conduit pipe concealed in wall, complete with 14 SWG copper earth continuity wire, GP box, modular type switch & ceiling rose/angle/batten holder fixed on 3 mm thick phenolic laminated bakelite sheet etc complete in all respect, as directed including matching colour wash.(S.I. No. 141 C + 187 C) 4 Wiring point for call bell with 1.5 sq. mm FR PVC insulated multistrand single core copper conductor cable in heavy gauge rigid steel conduit pipe concealed in wall, complete with 14 SWG copper earth continuity wire, GP box, modular type switch & ceiling rose/angle/batten holder fixed on 3 mm thick phenolic laminated bakelite sheet etc complete in all respect, as directed including matching colour wash.(S.I. No. 142 C + 187 E) 5 Supply and fixing of LED Tube Light with batten suitable for up to 1 x 22 watt LED Tube Light fitting including tube on surface complete in all respect.(S.I. No. 1413) CAT.AAA 6 Supply and fixing of LED Tube Light with batten suitable for up to 2 x 22 watt LED Tube Light fitting including tube on surface complete in all respect.(S.I. No. 1414) CAT.AAA 7 Supply and fixing of 36Watt to 46 Watt indoor recess mounting LED Square fitting for armstrong ceiling havinghaving Powder coated die cast aluminium housing with extended heat sink diffuser/reflector and driver set complete in all respects. (S.I. No. 1406CAT.AAA ) 8 Supply and fixing of water tight oblong 10 watt LEDbulkhead luminarie with driver set confirming to IP 65 and above protection. Complete in all respect. (S.I. No. 1417)CAT.AA 9 Supply and fixing of LED Street Light Fitting having die cast Aluminium body and diffuser with driver set suitable for 110-130 watt. Confirming to IP 65 and above protection complete in all respect. (S.I. No. 1424) CAT.AAA 10 Supply and fixing of power plug with 20A/250 volt flush type modular switch and 5 pin 20A/250V flush type universal modular socket switch on concealed M.S. box includingsupply of all material, labour T&P etc. required for proper completion of work.(S.I. No. 1139 A) 11 Supply and wiring of sub main with 2 Nos 4.0 sqmm FRLSH PVC insulated 1100 V grade single core multistrand copper conductor cable in 20mm dia 2mm thick PVCconduit onsurface with 1 No. 2.5sq mm copper earth continuity wire .complete in all respects (S.I. No. 211 C) 12 Supply and wiring of sub main with 2 Nos 4.0 sqmm FRLSH PVC insulated 1100 V grade single core multistrand copper conductor cable in 20mm dia 2mm thick PVCconduitin wall with 1 No. 2.5 sqmm copper earth continuity wire including matching colour wash etc., complete in all respects.S.I. No. 216 (C) 13 Supply and wiring of sub main with 2 Nos 6 sqmm FRLSH PVC insulated 1100 V grade single core multistrand copper conductor cable in 20mm dia 2mm thick PVCconduitin wall with 1 No. 4 sqmm copper earth continuity wire including matching colour wash etc., complete in all respects.(S.I. No. 217 (C) 14 Supply and wiring of sub main with 2 Nos 10 sqmm FRLSH PVC insulated 1100 V grade single core multistrand copper conductor cable in 20mm dia 2mm thick PVCconduitin wall with 1 No. 4 sqmm copper earth continuity wire including matching colour wash etc., complete in all respects. (S.I. No. 218 (C) 15 S/F of 6-32 Amp. MCB (10KA) CAT.B (S.I. No. 1002) 16 S/F of 6-32 Amp. DPMCB (10KA) CAT.B (S.I. No. 1009) 17 S/F of 63 Amp. DPMCB (10KA) CAT.B (S.I. No. 1011) 18 S/f surface/flush mounting 4 ways SPN distribution board with additional metal door without MCB complete in all respect and as directed at site.CAT.B (S.I. No. 1022 A) 19 S/f surface/flush mounting 8 ways SPN distribution board with additional metal door without MCB complete in all respect and as directed at site.CAT.B (S.I. No. 1024 A) 20 S/f surface/flush mounting 12 ways SPN distribution board with additional metal door without MCB complete in all respect and as directed at site.CAT.B (S.I. No. 1025 A) 21 S/F of sheet steel enclosure surface/flush mounting fitted with 20 Amp. 2 pin and earth metal clad scraping earth plug and socket complete in all respect as directed at site by E/C CAT.B (S.I. No. 1031) 22 Supply and fixing of electronic fan regulator 120-280 V ISI marked, on the existing switch board including making connections, required material, labour T&P etc for proper completion of work to the satisfaction of E/C of work (S.I. No. 1203 C) 23 Supply of Ceiling Fan with fan motor of AC Permanent insulation capacitor rating confirming BEE 5 star rating and IS:374/79 and also comply with IS: 1709/1984 with latest amendment. The rated voltage 220/240 volts, 50 Hz, 1 ph AC the fan assemble should consists of down rod blades, shackle canopies etc and with double ball bearing system (ii) BEE 4 star rated- 1200 mm sweep(S.I. No. 1501 (i) ) 24 Errection & Testing of Fan and regulator (S.I. No. 1115) 25 Supply and fixing of 16 SWG M.S. drum with luvers duly painted including making hole in the wall for exhaust fan and finishing property complete in all respect(S.I. No. 1122 A) 26 S/F of Fresh air fan 300 mm .Complete in all respects (GEM) 27 Providing, laying and fixing following dia G.I. pipe (medium class) in ground complete. 65 mm dia. ( Civil 18.12.7 ) 28 Providing, laying and fixing following dia G.I. pipe (medium class) in ground complete. 100 mm dia. ( DSR 14.13.3 ) 29 Supply and fixing of door chime on PMDFEG/ Teak wood board including making connections etc complete in all respect. (S.I. No. 1102) 30 Supply and fixing of decorative 40 to 45 Watt LED Post Top indirect Light luminaire having pressure die cast Aluminium body and clear glass with driver set Confirming to IP 65 and above protection complete in all respect. (S.I. No. 1443 CAT.AAA) 31 Supply and fixing of recess/surface mounting round 15Watt to 18 Watt LED Down Lighter having Powder coated die cast aluminium housing with extended heat sink diffuser/reflector and driver set complete in all respects. (S.I. No. 1403 CAT.AAA ) 32 S/f of 63 Amp metal clad TPN type switch fuse unit complete with rewirable type fuse on angle iron bracket complete in all respects CAT.B (S.I. No. 316 ) 33 S/f of 32 Amp metal clad TPN type switch fuse unit complete with rewirable type fuse on angle iron bracket complete in all respects CAT.B (S.I. No. 315 ) 34 Supply and burring of Safe Earthing Electrode T-19 (Hot Dip Galvanized), Length up to 2000mm, outer pipe 50mm, inner pipe 25, terminal Dia 12 mm, outer GI pipe of 16 swgand inner GI pipe of 12 swg with Hot Dip Galvanization up to 100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity along with 30cm square C.I. frame with hinged cover & masonry husing (from electrode terminal to switch board, cost of 25 x 3 G.I . strip will be extra) Make: As approved in U.P. P.W.D., & C.P.R.I. Certified.SI No.725(A) 35 Supply and burring of Safe Earthing Electrode T-19 (Hot Dip Galvanized), Length up to 3000mm, outer pipe 50mm, inner pipe 25, terminal Dia 12 mm, outer GI pipe of 16 swgand inner GI pipe of 12 swg with Hot Dip Galvanization up to 100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity along with 30cm square C.I. frame with hinged cover & masonry husing (from electrode terminal to switch board, cost of 25 x 3 G.I . strip will be extra) Make: As approved in U.P. P.W.D., & C.P.R.I. Certified. SI No.725(B) 36 Supply and fixing of one number 8 SWG G.I. wire in 15 mm. dia. G.I. pipe for earthing, laid in ground or in wall duly concealed including the cost of cement, sand, labour, T&P other material required for proper completion of the work as directed at site.(S.I. No. 721) 37 Supply and laying of aluminium conductor PVC insulated armored served sheathed cables 1100 Volts grade at depth of 750 mm below ground level over a cushion of 75mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on MS clamps etc. of suitable size or as directed by the Engineer-In-charge, complete in all respect. The armoring of the cable shall be properly connected with the earth conductor by clamps etc. (a) 6 sq. mm 2 core (S.I. No. 501 a) 38 (a) 16 sq. mm 2 coreS.I. No. 501 (c) 39 (a) 16 sq. mm 4 core S.I. No. 501 (i) 40 (a) 25 sq. mm 3.5 coreS.I. No. 501 (j) 41 (a) 35 sq. mm 3.5 core S.I. No. 501 (k) 42 (a) 95 sq. mm 3.5 coreS.I. No. 501 (n) 43 (a) 185 sq. mm 3.5 coreS.I. No. 501 (q) 44 Supply and fixing of palm or pin type copper tin plated cable socket (lug) to the cable leads, insulating with tape, and making connections etc. complete in all respects as per direction of the Engineer-in charge. (a) 16 sq. mm Lugs S.I. No. 504 (d) 45 (a) 25 sq. mm Lugs S.I. No. 504 (e) 46 (a) 35 sq. mm Lugs S.I. No. 504 (f) 47 (a) 95 sq. mmLugsS.I. No. 504 (i) 48 (a) 185 sq. mmLugsS.I. No. 504 (l) 49 Supply and fixing of palm or pin type copper tin plated cable socket (lug) to the cable leads, insulating with tape, and making connections etc. complete in all respects as per direction of the Engineer-in charge. (a) 35 sq. mm 3.5 core GlandS.I. No. 503 (k) 50 (a) 95 sq. mm 3.5 coreGlandS.I. No. 503 (n) 51 (a) 185 sq. mm 3.5 coreGlandS.I. No. 50 (q) 52 S/F of Hexagonal Fan Box complete in all respects (SI No. 1149 ) 53 S/F of single pole MCB blanking plate CAT.B(S.I. No. 1034 B) 54 Supply and fixing of recess/surface mounting round 24Watt to 32 Watt LED Down Lighter having Powder coated die cast aluminium housing with extended heat sink diffuser/reflector and driver set complete in all respects. (S.I. No. 1404 CAT.AAA ) 55 Supply and erection for factory fabricated and wired metal clad dust and vermin proof floor mounting MS Chanel base with bottom and top cable entreis Electrical control panel with TPN MCCBs (four pole 36 KA with thermal magnatic release ) switches complete and instrument chamber the followingswitches with fuses and instrument chamber etc. complete in all respects. The instrument chamber shall be separate and shall comprise of flush type digital ammeter, voltmeter, selector switches for ammeter and voltmeter instrument, fuses current transformers etc. The board shall have suitable capacity electrolytic aluminum bus bars as per IS: 8623 or aboveinsulated with heat shrink sleeving and mounted on non hygroscopic supports such as CMC/DMC supports with detachable side covers and shall be suitable for extension on the sides. The switches shall be complete with suitable cable and boxes, reverse entry boxes in case of pedestal type, cable sockets, compression glands and indicating lamp on incoming etc. The job includes the grouting of the board as per direction of Engineer-in-charge. All outgoing switches of 100 Amp. And above will be provided with ammeter, current transformers and selector switches etc. and instrument fuses etc. The switch board shall be galvanized with CRCA sheet with a minimum thickness of 1.6mm / 2mm cubicle type switch board shall be of cat. A. & B only. Cubicle type Cat B S.I.No 812.(b)INCOMING200 Amp. MCCB-1No.OUTGOING(i) 63 Amp. MCCB -03Nos (ii) 32 Amp. TPN- 02Nos 56 S/F of factory fabricated MS Box in existing Sunk of Size 600mm X 480mm X 200mm deep with godrej type almirah cover with handle etc fabricated from 18 SWG (1.25mm) MS Sheet duly painted red oxide nprimer followed two coates of synthetic enamel paint complete with necessary conduit entry and DP/TPN fixing arrangement and provision for compartment for loose wire openable housing on the top and hold fast etc including supply of all material and labour TNPreuired for completion of the work. (SI No 1147) 57 Construction of recess 600mm X 480mm X 200mm size of main board, distribution board of all sizes including cutting of brick work providing lintel of suitable size and thickness, plastering etc with supply of all material and labour required for proper completion of work (SI No. 1141 B) 58 S/F of 20 Amp,240V SPN industrial type socket outlet with 2 pole and earth , metal inclosed plug along with 20 Amp. C curve SPMCB in sheet steel inclosure on surface are in recess with chain metal cover for the socket outlet and complete with connection testing commissioning etc. as required. (DSR 2.18) 59 BILL OF QUANTITY Part B-Construction of H.T/LT Line , Double pole structure. 250 KVA Transformer S/F of LED street light on pole at S.M.Y.Maharajganj,Distt. Maharajganj. S/F steel tubular pole 9.5 meter long designated 410 SP-39 in 1:3:6 cement concrete foundation including excavation back filling etc. complete in al respects. (S.I. No. 616) 60 S/F of 100 mm × 110 mm shackle insulator/100 mm × 80 mm pin insulator(S.I. No. 621) 61 Supply and fixing of 230 mm × 32 mm × 1.5 mm galvanised steel strips including holes for shackle insulators pins and bolts etc. complete in all respect. (S.I. No. 622) 62 Supply and erection of D clamps of 50 mm × 6 mm flat iron on steel tubular poles / steel rail poles with bolts, nuts etc. complete in all respects including painting with aluminium paint. (S.I. No. 623) 63 S/E of O/H lines with ACSR conductor `weasel on poles including binding &jumpering complete in all respects(S.I. No. 627) 64 S/E of overhead line with G.I. wire on 8 SWG, GI wire on poles including binding complete in all respects (S.I. No. 628) 65 S/E of hexagonal / cradle type gaurd of G.I. wire no. 8 to 4 SWG including binding etc. complete in all respects.(S.I. No. 629) 66 S/E of stay set at 3.5 Metres away from the pole complete with galvanised 19 mm dia × 1.80 Metre long stay rod, 30 cm × 30 × 6.3 mm anchor plat, thimble stay clamps, stay insulator, 19 mm 600 mm double screw tightener, 7/3.5 mm G.I. stay wire etc. in 1:3:6 cement concrete in all respects.(S.I. No. 631) 67 Painting of pole with 2 coats of Aluminum paint over Red Oxide primer complete in all respects. (S.I. No. 634) 68 S/F of G.I. Pipe 65 mm diaB Class. DSR 2021 Civil 18.12.7 69 S/F of G.I. Pipe 100 mm diaB Class. DSR E/M 2022 14.13.3 70 Supply and fixing of LED Street Light Fitting having die cast Aluminium body and diffuser with driver set suitable for 110 to 130 watt. Confirming to IP 65 and above protection complete in all respect. CAT.AAA(S.I. No. 1424) 71 S/B of 600 mm × 600 mm × 6 mm GI plate vertically for earthing with its top at least 3 m below ground level with 20 mm dia GI pipe & funnel for watering. One earthing lead of 1 No. 8-10 SWG GI wire in 15 mm dia G.I. pipe up to switch board (from apron to switch board, the cost of GI pipe & GI wire will be extra) 30 Cm square C.I. frame with hinged cover masonry housing alternate layers of charcoal/coke and salt at least 150 mm thick alround etc. as per direction of E/I complete in all respect as per drawing (S.I. No. 702) 72 SS/F of 1 No. 8 SWG GI wire in 15 mm dia GI pipe for earthinglaid in ground or in wall duly from concealed including the cost of cement, sand, labour, T & P other material required for proper completion of the work as directed at site.(S.I. No. 721) 73 S/F of steel tubular pole 11.0 Meter long designated 410 SP-55 in 1:3:6 Cement concrete foundation including excavation back filling etc. complete in all respects. UPPCL H002991 (22) 74 Supply and laying of aluminium conductor PVC insulated armored served sheathed cables 1100 Volts grade at depth of 750 mm below ground level over a cushion of 75mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on MS clamps etc. of suitable size or as directed by the Engineer-In-charge, complete in all respect. The armoring of the cable shall be properly connected with the earth conductor by clamps etc. (a) 16 sq. mm 2 core (S.I. No. 501 c) 75 (b) 240 sq. mm 31/2 core (S.I. No. 501 R) 76 Supply and Fixing of 500 AMP 415 volt heavy Duty Double Break HRC Fuse Type metal clad TPN Complete with HRC Fuse ETC on Angel Iron Frame complete in all respect. Cat A 350 77 Erection of double pole three wire cross arm for 11KV/22KV/33KV overhead line required.DSR 13.9 78 Installation, testing & commissioning of 250 KVA, 11 K V / 433 V, 50 Hz, 3 phase Delta / Star connected Copper wound ONAN transformer with Dyn-11 vector group suitable for out-door, floor mounting. The transformer shall have OFF Load taps in steps of +/- 2.5 % and +/- 5 %, complete with first fill of oil and shall conform to I S : 2026, 1977 (latest edition). H.T. & L. T. sides of the transformer shall be suitable for cable termination complete with cable end-boxes as follows: :H.T.Side:1x3C x70 sq.mm. XLPE cable :L.T.Side:2 x3.5Cx 240 sq. mm. cables. :Transformer shall be provided with a Marshalling box with all the wiring for safety, measuring and indicating devices wired and terminated in it. : Providing Electrical Safety Certificates & UPPCL Handover etc.250KVA Transformer as described above Complete in all respects.Make: C.G.L/Siemens/ABB/K.P.L or any Equivalent and approved Company UPPCL V101206 (72) 79 Supply and laying of 3 core standard aluminium conductor XLPE (Cross linked polyethylene) insulated PVC bedded, Galvanised flat steel strip armoured cables conforming to I S : 7098 (Part II with latest amendments) 11 KV Grade at a depth of 900 mm below ground level over a cushion of 100 mm thick fine river sand all around and protected with well burnt bricks on sides and on top put across. The armouring of cable shall be properly connected with earth conductor by clamps etc.(a) 95 sq. mm. x 3 Core cable.506(d) 80 S/F of 63Amp. 415V metal clad T.P.N rewire able type switch fuse unit on angle iron bracket complete in all respects. 316 Cat B 81 Supply and burring of Safe Earthing Electrode T-39, (Hot Dip Galvanized), Length up to 2000mm, outer door pipe 76mminner Dia 38 mm, terminal Dia 12mm, outer GI pipeof 16 SWG and inner GI pipe of 12 SWG with Hot Dip Galvanization up to 100 micron filled with crystallineconductive mixture (CCM) having anti corrosive & conductive propertywith 50 kgs activatedsoil(BFC) capable of reducing the soil resistivity with good mixture of retainingcapacity along with 30 cm square C.I. frame with hinged cover & masonry housing. (from apron to switch board, of 25mm x 3mm G.I. stripwill be extra) make as App. in UP PWD & CPRI Certified725 A 82 S/L of 25mm x 3mm G.I. stripfrom earth electrode directly in the ground asrequired complete in all respects 716 83 Supply and burring of Safe Earthing Electrode T-19, (Hot Dip Galvanized), Length up to 3000mm, outer dia 50mminner Dia 25 mm, terminal Dia 12mm, outer GI pipeof 16 SWG and inner GI pipe of 12 SWG with Hot Dip Galvanization up to 100 micron filled with crystallineconductive mixture (CCM) having anti corrosive & conductive propertywith 50 kgs activatedsoil(BFC) capable of reducing the soil resistivity with good mixture of retainingcapacity and one earthing leadof 25mm x 3mm G.I. strip upto Switch Board (from apron to switch board,will be extra) along with 30 cm square C.I. frame with hinged cover & masonry housing. make as App. in UP PWD & CPRI Certified725 B 84 S/L of 32mm x 6mm G.I. stripfrom earth electrode directly in the ground asrequired complete in all respects 717 85 S/F of Disc Insulator (T & C Type) – 45KN 11KV. UPPCL H201 102 (24) UPPCL 86 S/F of Disc Fitting 45 KN (T & C Type) UPPCL H201 102 (28)UPPCL 87 S/F of Pin Insulator on HT Pole(11KV) UPPCL H201 501 (30) UPPCL 88 S/F of Pin with Net 11KV UPPCL H201 501 (34) UPPCL 89 S/F 11KV V Type Steel Cross Arm UPPCL H201 501 (36) UPPCL 90 S/F of Three Piece nonlinear resister type lightening arrestor suitable for three wire 11 KV overhead lines with rated voltage 9 KV(RMS) with a nominal discharge current rating of 5 KA and complete with galvanised clamping arrangement GI Volts Nut washers etc required. DSR 2022 13.13 91 S/F of 2 mtr high cage fabricated with 3mm thick expanded metal fixed on 50mmx50mmx6mm angle iron frame having vertical members spaced at 1 to 1.25 mts. and horizontal members spaced at 1mt. The vertical members shall grouted in floor and horizontal members in the wall to a depth of 300mm with ends forked. The cage shall have 2000mmx 1000mm size one leaf door with locking device having door frame fabricated with 35mmx35mmx6mm angle iron and 3mm expanded metal duly fixed with the cage member with hinges etc. the cage shall be painted with red oxide primer and synthetic enamel paint. The job includes all materials, labour, T&P for proper completion of work. 1142 92 S/M straight through cable jointing with cost raising compound, including ferrule and lugs and other jointing materials for 120 sq mm 3 core XLPE aluminium conductor cable of 11 KV Grade. DSR 2022 10.2.2 93 S/F of 11 KV TPMO with Polymer Insulator. UPPCL X50 515 (92) UPPCL 94 S/F 3 phase D.O. Fuse Set 11 KV. UPPCL X50 515 (93)UPPCL 95 S/E of MS channel cross arm 100X 50X 2240mm.UPPCL Schedule 21Anex 2 (3) UPPCL 96 S/F of danger board fabricated from 10 gauge M.S. Sheet as per I.E. Rules. 1109 97 Construction of First class Brick work in 1:6 Cement & Coarse Sand in Foundation & Plinth including supply of all materials, labour and T&P etc. required for proper completion of works. Civil 303 98 Providing 12 mm thick Plaster with cement Mortar consisting one part cement & two parts coarse sand over brick work minimum thickness not less than 3/8(10mm) thick including supply of all materials, labour & T&P etc. required for proper completion of works. Civil 581 99 Providing White washing with two coats including supply of all materials, labour & T&P etc. required for proper completion of works. Civil 672 100 Construction of Cement concrete with 2 cm gauge grit ballast approved coarse sand & cement in the proportion of 4:2:1 including supply of all materials, labour & T&P etc. required for proper completion of works. Civil 279-A 101 BILL OF QUANTITY Part C - S/I/T/C of 02 Nos. 16 mtr. Highmast Lighting System with 200w LED flood light at S.M.Y. Mahrajganj (Partawal) Supply and fixing of 16 mtr. High mast pole of approved make with rising system, hot dip Galvanized inside & outside, having pole sheet thickness 4mm, top dia minimum 150 mm, bottom dia minimum 360mm, base plate 32 mm. thick, suitable for wind velocity as per IS 875 part 3 & having no. circumferential weld, with accessories for high mast such as head frame suitable for 6 luminaries & its control gear boxes, 1 HP power tool motor, 3 point suspension with steel wire rope 6 mm. dia double drum which including making suitable foundation as per manufacture drawing & site requirement along with foundation bolts, nuts, washers, anchors, plates etc. Complete in all respect as per direction and satisfaction to the Engineer-in-charge.(S.I. No. 652) 102 Supply and fixing of single unit LED aviation obstruction light complete with transformer and LED spiral etc. complete in all respects. Cat AAA( S.I. No.409) 103 Supply &fixing of Factory wired IntegralLED flood light luminaries with die cast aluminium housing built with driver set suitable for 170 to 200 Watt. Confirming to IP 66 and above Protection complete in all respect. Cat AAA(S.I. No. 1455) 104 S/F of following capacity of automatic street light cubical control panel painted with anti corrosive alkali and acid proof paint consisting of time switch TSO 100 series with contractors HRC fuses Isolating switch Metering instrument & instrument box with CTs etc . In case of TPN complete in all respect.25Amp TPN (S.I. No. 807 e ii) 105 S/W of 4no. 4 sq mm. copper conductor submain complete in all respect.(S.I. No. 266 C) 106 Supply and laying of 25mm x 3mm G.I. strip from earth electrode directly in the ground as required complete in all respect. (S.I. No. 716) 107 Supply and fixing of palm or pin type copper tin plated cable socket (lug) to the cable leads, insulating with tape, and making connections etc. complete in all respects as per direction of the Engineer-in charge. (a) 16 sq. mm Lugs S.I. No. 504 (d) 108 (a) 50 sq. mm Lugs S.I. No. 504 (g) 109 (a) 95 sq. mm Lugs S.I. No. 504 (l) 110 Supply and erection for factory fabricated and wired metal clad dust and vermin proof floor mounting panel TPN switch board complete with the following HRC type heavy duty TPN fuse switches with fuses and instrument chamber etc. complete in all respects. The instrument chamber shall be separate and shall comprise of flush type ammeter, voltmeter, selector switches for ammeter and voltmeter instrument, fuses current transformers etc. The board shall have suitable capacity electrolytic aluminum bus bars as per IS: 8623 insulated with heat shrink sleeving and mounted on non hygroscopic supports such as CMC/DMC supports with detachable side covers and shall be suitable for extension on the sides. The switches shall be complete with suitable cable and boxes, reverse entry boxes in case of pedestal type, cable sockets, compression glands and indicating lamp on incoming etc. The job includes the grouting of the board as per direction of Engineer-in-charge. All outgoing switches of 100 Amp. And above will be provided with ammeter, current transformers and selector switches etc. and instrument fuses etc. The switch board shall be galvanized with CRCA sheet with a minimum thickness of 1.6mm / 2mm cubicle type switch board shall be of cat. A.B & B-II and pedestal type for cat. C only. Cubicle type Cat B INCOMING 100 Amp. TPN-1NoOUTGOING (i) 63 Amp. TPN -01Nos (ii) 32 Amp. TPN- 02Nos 801C 111 Supply and burring of Safe Earthing Electrode T-19 (Hot Dip Galvanized), Length up to 2000mm, outer pipe 50mm, inner pipe 25, terminal Dia 12 mm, outer GI pipe of 16 swgand inner GI pipe of 12 swg with Hot Dip Galvanization up to 100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity along with 30cm square C.I. frame with hinged cover & masonry husing (from electrode terminal to switch board, cost of 25 x 3 G.I . strip will be extra) Make: As approved in U.P. P.W.D., & C.P.R.I. Certified.SI No.725(A) 112 Supply and laying of aluminium conductor PVC insulated armored served sheathed cables 1100 Volts grade at depth of 750 mm below ground level over a cushion of 75mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on MS clamps etc. of suitable size or as directed by the Engineer-In-charge, complete in all respect. The armoring of the cable shall be properly connected with the earth conductor by clamps etc.(a) 16 sq. mm 4 core (S.I. No. 501 i) 113 (a) 95 sq. mm 3.5 coreS.I. No. 501 (l) 114 Supply and burring of Safe Earthing Electrode T-19 (Hot Dip Galvanized), Length up to 3000mm, outer pipe 50mm, inner pipe 25, terminal Dia 12 mm, outer GI pipe of 16 swgand inner GI pipe of 12 swg with Hot Dip Galvanization up to 100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity along with 30cm square C.I. frame with hinged cover & masonry husing (from electrode terminal to switch board, cost of 25 x 3 G.I . strip will be extra) Make: As approved in U.P. P.W.D., & C.P.R.I. Certified. SI No.725(B) 115 S/L of G.I. Pipe 65 mmB Class. (Civil DSR). (Civil 18.12.7) 116 S/F of G.I. Pipe 100 mm diaB Class. DSR E/M 2022 14.13.3 117 BILL OF QUANTITY Part D-S/F of 01 No. Overhead and 02 Nos. Cantilever Retro Reflective Sign board and Signage Board atS.M.Y. Maharajganj (Partawal) Providing fixing and hosting complete in position of welded built up structure of MS Pipe for overhead type structure signage comprising two vertical posts 6.30M clear height from the top of R.C.C foundation make of two No. 300mm dia NB heavy class M.S. pipe ISI Mark as vertical, post welded with 10mm, 2 Nos. at bottom and two nos. at top thickM.S Plate of size0.90mm x 0.90mm x 0.10mm RCC foundation for bearing with stiffness and horizontal frame 40mm NB(M) as diagonal bracing with one coats of metal primer and two coats of synthetic enamel paint including excavation foundation will be of 2.60M x 1.8M x 1.8M with bolts of size 20mm dia with MS plate of size 1.05 M x 1.05M X 10MM with hosting in position. Span 12 to 16M (Appd.) 118 Cantilever-Type-StructureProviding fixing and hosting complete in position of welded built up structure of MS Pipe for cantilever type structure signage comprising one vertical posts 6.00M clear height from the top of R.C.C foundation made of 300mm dai. NB heavy class M.S. pipe ISI Mark as vertical, post welded with 1 nos.10mm thickM.S Plate of size 0.75mm x 0.75mm at top and 1nos. 10mm thick MS plate of size 0.90mm x 0.90mm at bottom welded with 300mm MS pipe and 1 nos. 10mm thick MS plate of size 1.05mm x1.05mm at bottom with R.C.C Foundation for bearing with stiffness and horizontal and vertical frame of 40mm dia NB mark medium pipe and 25mm dia NB ISI mark medium pipe and as horizontal bracing as per drawing with one coats of metal primer and then two coats of synthetic enamel paint including excavation in foundation with R.C.C work as per drawing enclosed The foundation will be of 1.10m x 1.10m x 2.00m with bolt of size 20mm dia with MS plate with hoisting in position and as per drawing The job includes all other materials required for proper completion of work.6 Mtr. Span.( Appd.) 119 Supply and fixing of Retro Reflective High intensity sign board made of 2mm thick aluminum sheet face to be fully covered with high intensity grade Retro Reflective sheet (Approved Brand of M.O.S.T) colour as per required and test matter sign & symbol shall be computerized cutting machine and fabricated out of high intensity grade Retro Reflective sheeting. The board are to be supply along with back frame of angleiron of size 40x10x4mm all around and across with proper clamping arrangement painted with synthetic enamel paint to fix with tubular structure of on wall. The back of aluminum sheet shall be powder coated.(1) For Cantilever Board(A) FrontSide 3 x 6 x 1.22=21.96 sqm(B) Backside- 3 x 6 x 1.22=21.96 sqmA + B= 21.96 + 21.96 = 43.92 sq m(2)On Over Head (C) Front Side1 x 16 x 1.22 = 19.52sq m(D) Back Side – 1 x 6 x 1.22=7.32sq m C + D=19.52 + 7.32=26.84 sq mTotal (1+2)= 43.92 + 26.84=70.76 sq m (Appd.) 120 Internal Signage board of size (1.50m x 1.22m)As per detail attach.(Appd.) 121 Internal Signage board of size (0.60 m x 1.22m)As per detail attach.(Appd.)
