|
| 1 | Earth work open excavation and depositing on bank with in the initial lead of 10m and a lift of 2m in hard stiff clay, stiff block cotton, hard red earth, shales, murram, gravel, stoney earth and earth mixed with small size boulders etc. complete. complying with std. specifications.SS 20 A |
| 2 | Earth work excavation for foundation and depositing on bank with in the initial lead of 10m and a lift of 2m in hard stiff clay, stiff block cotton, hard red earth, shales, murram, gravel, stoney earth and earth mixed with small size boulders etc. complete. complying with std. specifications.SS 20 B |
| 3 | Plain Cement Concrete 1:4:8 Mix (one part cement, four part sand and eight part of aggrigate) using 40 mm size ISS HBG metal from approved quarry including cost and conveyance of all materials to site. Loading and unloading charges and labour charges for mixing. Laying and curing etc. complete. Complying with Standard Specifications as per TNDSS No. 28 V, VI (S2) V,VI (S5A) VII |
| 4 | Supplying and Fabricaton ofTMT rods including cost of cutting,bending and tying with cost of binding wire including cost and conveyance of all materials and labours charges etc., complete as per standard specification |
| 5 | Providing and laying in position Standardised Concrete Mix M-20 Grade in accordance with IS 456-2000 Using 20mm and down grade hard broken granite Stone jelly for all RCC items of works with mimimum cement contenet of 325 kg /cum and maximum water cement ratio of 0.55 incluting admixtur(plasticier /super plasticiser ) in recommended proportions as per IS 9103 to accelerate, related setting of concrete, improve workabillity without imparing strength and durabillity with about (5.0cum), 7730kg of 20mm machine crushed stone jelly and with about (3.3cum),5156 kg of 10- 12mm machine crushed stone jelly and with about (4.79 cum) 7670kg of sand but excluting cost of reinforcedment grill and fabricating charges centering and shuttering but incluting laying vibrating with machine vibrating ,finishing ,curring ,etc,,and providing fixtures like fan clamps in the RCC Floor /roof slabs wherever necessary without claiming extra cost etc., compete complying with standard specificaton and as directed by the departmental officer -The Coarse and Fine aggregates to be used should comply with the requirements of IS Standards. (No separate paymentswill be made by the depatment for the excess usage of materials ) |
| 6 | Steel shuttering with MS Sheets and MS angels including fixing in position with country wood scantlings for drain side wallsincluding cost and conveyance of all materials and all labour charges to site and other incidental charges etc., complete.as per standard specification 86 A & 86 K. a) Square columns |
| 7 | b) Plain surface |
| 8 | Supply and filling well gravel including cost and conveyance of gravel to site stacking them to department gauge for taking pre-measurement etc. complete as per standard specification |
| 9 | Brick work in cement mortar 1:5 (one cement five sand) using best quality country bricks including cost and conveyance of all materials to working site in super sector curing etc. complete. Complying with standard specifications and has directed by departmental Engineers. Including cost and conveyance of all materials to working site etc. |
| 10 | Plastering in Cement Mortar 1:5 Mix (one Cement, Five sand ) 12mm thick including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing etc. complete . complying with std. specifications as per TNDSS No.56 & 57 |
| 11 | Plastering in Cement Mortar 1:3 Mix (one Cement, Three sand ) 10mm thick including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing etc. complete . complying with std. specifications as per TNDSS No.56 & 57 |
| 12 | Supplying and fixing in position of23\" sizewhite Orissa pan Indian Water closet of approved quality with S or P trap including fixing the same in position etc., completed. |
| 13 | Supplying and fixing M.S.grill to doors, special windows and ventilators etc as directed by the departmental officers inclusive of cost of MS grill including one of cost red oxide and fixing in position etc., complete (as per the schedule of rate) SL.NO.182 Q3 |
| 14 | Dadooing the walls from the floor level with white glazed tiles of 300mmx300mm x 6mm of best and approved quality set in cement mortar 1:2 mix (one cement and two sand) 12mm thick and pointing with white cement neatly as directed Complying with standard specifications |
| 15 | Flooring with Ceramic tills 20cmx20cmx6mm thick laided with cm 1:3 10mm thick and point with cement using 0.40kg per M2 including finishing and joint and pointing flush suraface etc complete |
| 16 | Painting the new walls two coats over one coat of priming with best Cement paint of approved colour and quality including preparation of surface and finishing neatly etc., complete complying with standard specification and as directed by the department officers (S.l.No.359-A) |
| 17 | Painting the new iron work in all floor two coat of best synthetic enamel paintof approved colour and brand over one coat of primer including scrapping and preparation of surface, cost of breshes and neat finishing complying with stadard specifications. |
| 18 | Supply and run of 2 of 4 sq.mm. (56 / 0.3) PVC insulated SC unsheathed copperconductor of 1100V on 7 / 20 GIbearer wire for service connection mains (SD 65) |
| 19 | Supply and run of 2 of 4 sq.mm. (56 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in suitablePVC rigid pipe on wall and ceiling with continuous earth wire connection of 14 SWG TC wire with painting of suitablecolour(SD 56) |
| 20 | Wiring with 2 x 1.5 sq.mm. (22 / 0.3 ) PVC insulated single core unsheathed copper conductor cable of 1100V grade insuitable heavy gauge MS conduit pipe on wall and ceiling with MS accessories with MS switch Box and 5A FT switchwith painting of suitable colour continuous earth wire connection of 14 SWG TC wire for light point / fan point (forelectronic regulator)(SD1) |
| 21 | Wiring with 2 x 4 sq.mm. (56 / 0.3) PVC insulated SC unsheathed copper conductor cable of 1100V grade in suitablepipe on wall and ceiling with PVC accessories with 150mm x 100mm x 113mm TW switch box for 15A 3 pin non interocking wall socket with 15A flush type switch with painting of suitable colour with continuous earth wire connection of l14 SWG TC wire for open PVC power plug point |
| 22 | supply and fixing of Eectrical materialWoodern board |
| 23 | 32 Amp fuse carier |
| 24 | 9 W CFL Bulb |
| 25 | v)1x36 CFL Street light higher end |
| 26 | Cudapha slab 30mm thickness |
| 27 | Supply and Delivery of PVC Pipes GI Pipes HDPE Hose and Specials etc complete. 1000 lts HDPE TANK |
| 28 | 110 mm dia PVC 4.50 KG/CM ² pipe |
| 29 | 110 mm dia PVC Elbow |
| 30 | 110 mm dia PVC TEE |
| 31 | 25 MM TANK NIPPLE |
| 32 | 25mm dia PVC Tee |
| 33 | 25mm dia UPVC pipe |
| 34 | 25mm dia UPVC Elbow |
| 35 | 25x20mm PVC Reduce |
| 36 | 20 mm dia UPVC pipe |
| 37 | 20 mm dia UPVC Elbow |
| 38 | 20mm dia UPVC Tee |
| 39 | 20mm PVCThreated Lbow |
| 40 | 20 mm Waste water nut tap |
| 41 | 50 mm thick rcc precaust jolly |
| 42 | 75mm thick rcc precaust jolly |
| 43 | Towards labour charges for fixing of PVC ,GI pipe and(CM) including cost and conveyance of all materials and all labour charges etc complete as per standard specification. 110mm dia PVCpipe: |
| 44 | 25mm dia PVCpipe: |
| 45 | 20 mm dia PVCpipe: |
