Tender For Construction and repair work to fulfill the prescribed parameters in Primary School Boys Number 63 PAC, under Ward No. 24 Operation Kanyakalp Yojana, 1 Excavation in foundation in ordinary soil (Loam, Clay or Sand) Including lift upto 1.50 m and lead upto 30m and including filling watering and ramming of excavated earth into the trenches or into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the Engineer In-charge upto a distance of 30m from the foundation trenches by Hydraulic excavator/manual means. For Building/ Drain work only. 2 Providing and laying cement concrete in 1:6:12 (1 cement : 6 Fine sand : 12 Graded stone aggregate 40mm nominal size) including supply of all material, labour and T&P etc. required for proper completion of the work. In Foundation and floors. 3 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation-150 in foundation and plinth in:Cement mortar 1:4 (1 cement : 4 coarse sand) 4 Providing and laying D.P.C 25 mm thick with Cement concrete Consisting of 1:1.5:3 (1 Cement : 1.5 Coarse Sand : 3 approved 5.6 mm graded Stone grit) and including water proofing martreial as approved by the Engineer-In-Charge in the proportion as specified by manufacturer. 5 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 150 in superstructure above plinth level up to floor V level in all shapes and sizes in :: Cement mortar 1:4 (1 cement : 4 coarse sand) 6 Providing and laying in position specified grade of reinforced cement concrete, including the cost of centering, shuttering, finishing and excluding reinforcement - All work up to plinth level : (a) 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) 7 M.S or Iron work in plain work such as reinforced concrete or reinforced brick work (When not included in and an over all rates) brought to required shape as necessary of the work and including the suply of steel and its wastage bend, hooks and authorized over lapping shall be measured upto floor to level. 8 12 mm cement plaster on brick work with cement mortar of mix (upto 10 mtr height from Ground level) (II) 1:4 (1 cement : 4 Coarse sand) 9 Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid 10 Providing and laying cement concrete in 1:2:4 (1 Cement : 2 Coarse sand : 4 graded stone aggregate 20 mm nominal size) including supply of all material, labour and T&P etc. required for proper completion of the work. All work upto plinth level 11 Providing and laying Ceramic glazed floor tiles of size 300×300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete. 12 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete including cost of all material, Labour, T&P etc. complete required for proper completion of the work. 13 Finishing walls (Two coats) with water proofing cement paint of approved make such as Super snowcem, Durocem, Robiance, Guttucem, Supercem quality and of required shade on undecorated wall surface over and including one coat white cement primer to give and even shade after thoroughly brushing the surface, including cost of all material, Labour, T&P etc. complete required for proper completion of the work. 14 Painting on Steel/G.S. sheet with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : New work (two or more coats) including a coat of approved steel primer but excluding a coat of mordant solution. 15 S/F Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand). 16 Providing and fixing angle/Tee iron frames for doors, windows and ventilators of mild steel Angle sections of size 35×35×5 mm, joints mitred and welded by angle iron 35×35×5 mm or 35×5 mm flat pieces to the existing T-iron frame or to the wall with dash fastener, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer, all complete as per the direction of Engineer-In-charge. 17 Supply and fixiing ward robe shutters made of 18 gauge (1.25 mm) M.S sheets including cold rolling of required shape and including supply & fixing of approved qualitiy locks handle etc. Complete including supply of all material labourand T&P spray painting etc. complete 18 Mild Steel Iron grill, balcony & staircase railing of a approved qualitiy and drawingincluding supply of all materials, fabrication, labour, T&Pin all respect as per direction of Engineer-in-charge for proper completion of work at site. 19 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: (f) White Vitreous China Angle back wash basin size 400×400 mm with single 15 mm C.P. brass pillar tap 20 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: (f) White Vitreous China Angle back wash basin size 400×400 mm with single 15 mm C.P. brass pillar tap 21 Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : (b) Rectangular shape 453×357 mm 22 Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gms 23 Suppling and hoisting of Sintex or equivalent high density polyethylene seamless of piece moulded tanks and placing the same in proper position including all materials, labours and T&P etc. for proper completion of the work. Tank should be ISI marked, Sintex or equivalent and I/C all taxes. (c ) For 500 litres. 24 Providing and fixing stainless steel drop down rail with screws etc. complete. 25 Providing and fixing stainless steel horizontal and vertical Grab Rail (handle) with screws etc. complete. 26 Drainage System and Water Supply System 27 Providing and laying vitrified floor tiles in different sizes with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all coloums and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. (A) With lean concrete (ii)600×600 mm size tiles 28 Excavation in foundation in ordinary soil (Loam, Clay or Sand) Including lift upto 1.50 m and lead upto 30m and including filling watering and ramming of excavated earth into the trenches or into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the Engineer In-charge upto a distance of 30m from the foundation trenches by Hydraulic excavator/manual means. For Building/ Drain work only. 29 Providing and laying cement concrete in 1:6:12 (1 cement : 6 Fine sand : 12 Graded stone aggregate 40mm nominal size) including supply of all material, labour and T&P etc. required for proper completion of the work. In Foundation and floors. 30 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation-150 in foundation and plinth in:Cement mortar 1:4 (1 cement : 4 coarse sand) 31 Providing and laying D.P.C 25 mm thick with Cement concrete Consisting of 1:1.5:3 (1 Cement : 1.5 Coarse Sand : 3 approved 5.6 mm graded Stone grit) and including water proofing martreial as approved by the Engineer-In-Charge in the proportion as specified by manufacturer. 32 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 150 in superstructure above plinth level up to floor V level in all shapes and sizes in :: Cement mortar 1:4 (1 cement : 4 coarse sand) 33 Providing and laying in position specified grade of reinforced cement concrete, including the cost of centering, shuttering, finishing and excluding reinforcement - All work up to plinth level : (a) 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) 34 M.S or Iron work in plain work such as reinforced concrete or reinforced brick work (When not included in and an over all rates) brought to required shape as necessary of the work and including the suply of steel and its wastage bend, hooks and authorized over lapping shall be measured upto floor to level. 35 12 mm cement plaster on brick work with cement mortar of mix (upto 10 mtr height from Ground level) (II) 1:4 (1 cement : 4 Coarse sand) 36 Providing and laying cement concrete in 1:4:8 (1 Cement : 4 Fine sand : 8 graded stone aggregate 40 mm nominal size) including supply of all material, labour and T&P etc. required for proper completion of the work.In Foundation and floors. 37 Providing and laying cement concrete in 1:2:4 (1 Cement : 2 Coarse sand : 4 graded stone aggregate 20 mm nominal size) including supply of all material, labour and T&P etc. required for proper completion of the work. All work upto plinth level 38 Providing and laying Ceramic glazed floor tiles of size 300×300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete. 39 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete including cost of all material, Labour, T&P etc. complete required for proper completion of the work. 40 Finishing walls (Two coats) with water proofing cement paint of approved make such as Super snowcem, Durocem, Robiance, Guttucem, Supercem quality and of required shade on undecorated wall surface over and including one coat white cement primer to give and even shade after thoroughly brushing the surface, including cost of all material, Labour, T&P etc. complete required for proper completion of the work. 41 Painting on Steel/G.S. sheet with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : New work (two or more coats) including a coat of approved steel primer but excluding a coat of mordant solution. 42 S/F Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand). 43 Providing and fixing angle/Tee iron frames for doors, windows and ventilators of mild steel Angle sections of size 35×35×5 mm, joints mitred and welded by angle iron 35×35×5 mm or 35×5 mm flat pieces to the existing T-iron frame or to the wall with dash fastener, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer, all complete as per the direction of Engineer-In-charge. 44 Supply and fixiing ward robe shutters made of 18 gauge (1.25 mm) M.S sheets including cold rolling of required shape and including supply & fixing of approved qualitiy locks handle etc. Complete including supply of all material labourand T&P spray painting etc. complete 45 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430×260×350 mm or 340×410×265 mm sizes respectively. 46 P.V.C. Water Storage Tank Sintex or Equivalent 47 Making Soak pit 2.5m diameter 3.0m deep with 45x45 cm dry brick honey comb shaft with bricks of class designation 75 and S.W. drain pipe 100mm diameter, 1.8m long complete as per standard design. With F.P.S. bricks 48 Drainage System and Water Supply System 49 Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground within 50 metres lead : (a) With cement mortar of mix 1:4 (1 cement : 4 fine sand) (not less than in 1.25 FM) 50 Providing and laying Ceramic glazed floor tiles of size 300×300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete. 51 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete including cost of all material, Labour, T&P etc. complete required for proper completion of the work. 52 Finishing walls (Two coats) with water proofing cement paint of approved make such as Super snowcem, Durocem, Robiance, Guttucem, Supercem quality and of required shade on undecorated wall surface over and including one coat white cement primer to give and even shade after thoroughly brushing the surface, including cost of all material, Labour, T&P etc. complete required for proper completion of the work. 53 Providing and fixing angle/Tee iron frames for doors, windows and ventilators of mild steel Angle sections of size 35×35×5 mm, joints mitred and welded by angle iron 35×35×5 mm or 35×5 mm flat pieces to the existing T-iron frame or to the wall with dash fastener, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer, all complete as per the direction of Engineer-In-charge. 54 Supply and fixiing ward robe shutters made of 18 gauge (1.25 mm) M.S sheets including cold rolling of required shape and including supply & fixing of approved qualitiy locks handle etc. Complete including supply of all material labourand T&P spray painting etc. complete 55 Providing and laying cement concrete in 1:2:4 (1 Cement : 2 Coarse sand : 4 graded stone aggregate 20 mm nominal size) including supply of all material, labour and T&P etc. required for proper completion of the work. All work upto plinth level 56 Construction of padestal Granite stone etc all complete. 57 Add 18% GST 58 The Total value of Schedule4
