Tender For Annual Repair (2024-25) Of Rajender Nagar Pwd Colony In District Bareilly, 1 Concrete With 4Cm(1½). Gauge Brick Ballast, Coarse Sandand Cement In Proportion Of 8:4:1 In ... And T&P Etc.Required For Proper Completion Of The Work. Si-275 2 R, bareilly-Uttar Pradesh

Tender For Annual Repair (2024-25) Of Rajender Nagar Pwd Colony In District Bareilly, 1 Concrete with 4cm(1½). Gauge brick ballast, Coarse sandand cement in proportion of 8:4:1 in ... and T&P etc.required for proper completion of the work. SI-275 2 R.C.C. work with cement approved coarse sand and 2 cm (3/4) gauge approved …. and T&P etc. required for proper completion of the work. Binding wire cost being included in the item.SI-283 3 First class brick work in 1:6 cement and coarse sand mortar in foundation and plinth including supply of all materials, labour and T&P etc. required for proper completion of the work.SI-303 4 12 mm thick plaster over brick work minimum thickness not to be less than 3/8 (10 mm)... all materials, labour and T&P etc. required for proper completion of the work. SI-584 5 Supply and fixing of 32mm thick flush Doors commercial quality conforming to I.S. 2202 Part I (1983)..fitting with necessary screws to be supplied departmentally.SI-470(I) 6 Mild steel or iron work of small size and sections such asfabrication of door and window….required for proper completion of work.SI-502(b) 7 Mild steel or iron in plain work such as reinforced concrete or reinforced brick work ...lapping & hooks.SI-504 8 2.5 cm (1 thick 1:2:4 plain cement concrete floor with cement, approved coarse sand and 2 cm…..materials, labour and T&P etc. requierd for proper completion of the work.SI-601(a) 9 Providing and laying Plaster of pris putty (thickness to be specified by the manufacturer) …etc complete. DSR no 13.26 10 Distemper one coat with oil bound distemper of approved brand manufacture and required shade on previously old distemper surfaces including cost of all materials. 11 item same as above but second coat on previous surface. 12 Painting one Coat on previously painted old surface with paint of Superior quality on ...all materials ,labour ,T&P etc required for the proper complition of the work.SI-3(iii) 13 item same as above but second coat . 14 White washing two coat, including supply of all materials, labour & T&P etc. required for proper completion of the work.SI-672 15 Colour washing two coat, using approved colouring materials of bluff, blue, grey, or brown shade, including supply of all materials, labour & T&P etc. required for proper completion of the work. 16 Scraping old white or colour wash including disposal of refuse as directed by the Engineer-in-Charge within distance of 60 mt. (200 ft.).SI-708 17 Providing and fixing White Vitreous china Orissa pattern W.C. pan of size 580x440mm with integral type foot rests water closet squatting pan ...making good the walls and floors wherever required. D.S.R.-17.1.1 18 Providing and fixing 10 litre capacity-coloured-White P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. DSR-17.18.1 19 Providing and fixing white vitreous china wash basin Flat back wash basin of size 550x400mm including making all connections but excluding the cost of fittings. DSR-17.25.5 20 Providing and fixing 600x450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.DSR-17.31 21 Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. linternal work - Exposed on wall. 22 15 mm dia. nominal bore. DSR-18.10.1 23 20 mm dia. nominal bore. DSR-18.10.1 24 Providing and fixing brass bib cock of approved quality 25 15 mm nominal bore. DSR-18.15.1 26 20 mm nominal bore. DSR-18.15.2 27 Providing and placing on terrace (at all floor levels) polyethylene water….pipes but without fittings and the base support for tank.DSR-18.48 28 Providing and fixing 15 mm dia. Nominal size C.P. brass bib cock of approved quality conforming to IS:8931.DSR-18.49.1 29 Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931. DSR-18.53.1 30 Providing and fixing on wall face unplasticised Rigid PVC 110mm dia. Rain water pipes conforming to IS : 13592 Type A including jointing with seal ring confirming to IS : 5382 leaving 10mm gap for thermal expansion. (i) Single socketed pipes. DSR- 12.41.2 31 Providing and fixing fly proof galvanised M.S. wire gauge to windows and clerestory ….0.63 mm. DSR no 9.51.1 with 2nd class teak wood beading 62x19mm D.S.R no 9.51.1 32 Renewing glass pares with Putty and Nails whereever necessary including racking out, old putty. DSR No. 14.5.1 33 Supply & fixing 6 mm (1/4) China white glazed in flooring or skirting dado laid with 1:3 cement …...of the work.S.I.no 628

Sr No	CorrigendumDate	Corrigendum	CorrigendumType	NewSubmissionDate
1	23-07-2024	Date Corrigendum	Date	27-07-2024

INR 856 /-

INR 13 Lakhs /-