Tender For Repairing And Replacement Of Damaged Line, Pole And Other Materials Due To Storm In Area Of Edd-Garh, 1 For Reparing & Replacement Of Damaged Electricity Lines, Poles & Other Materials, Due To Heavy Storm, Under The Juirisdiction Of Edd-Garhm, hapur-Uttar Pradesh

tender for Repairing And Replacement Of Damaged Line, Pole And Other Materials Due To Storm In Area Of Edd-Garh, 1 FOR REPARING & REPLACEMENT OF DAMAGED ELECTRICITY LINES, POLES & OTHER MATERIALS, DUE TO HEAVY STORM, UNDER THE JUIRISDICTION OF EDD-GARHMUKTESHWER, UNDER EDC., HAPUR 2 Carriage of line material from Electricity Store Center, Hapur to site of work with loading and unloading at both ends on Kachha Packka road. 3 Carriage of S.T. Pole 11 Mtr. Long from Electricity store center, Hapur to site of work with loading and unloading at both ends on Kachha Packka road. 4 Carriage of PCC Pole 8.5 Mtr. Long from Electricity store center, Hapur to site of work with loading and unloading at both ends on Kachha Packka road. 5 Erection & Fixing of ST. Pole 11 mtr. longin 11 KV/33KV line after digging of suitable pits including fixing of requisite accessories as per RESPO Drawing/Norms by providing F-Bracket made of M.S. Flat of size 50x6 mm, Cross Arm holding Clamps made of M.S. Flat of size 50x6 mm with proper size nuts and bolts. 6 Erection & Fixing of PCC Pole 8.5 mtr. longin LT/11 KV line after digging of suitable pits including fixing of requisite accessories as per RESPO Drawing/Norms by providing F-Bracket made of M.S. Flat of size 50x6 mm, Cross Arm holding Clamps made of M.S. Flat of size 50x6 mm with proper size nuts and bolts. 7 Fabrication, erection, fixing and straightening of old & damaged double pole on PCC/ST Pole with fixing of M.S. Top & Dropper Channel, M.S. S/S Angle, E-Bracket, 11 KV Pin insulator with Pin,Disc Insulator with Disc fitting as per RESPO Drawing/Norms by providing topand dropper clamps made of M.S. Flat of size 50x6 mm with proper size nuts and bolts, including removal of Transformers and after completion work, mounting of Transformers with proper jumpering as per RESPO Norms. 8 Laying , Stringing and final sagging of ACSRWeasel Conductor after binding from Insulator. 9 Laying , Stringing and final sagging of ACSR Dog Conductor after binding from Insulator. 10 Laying , Stringing and final sagging of ABC (3x195+1x70+1x16) Conductor after binding from Insulator. 11 Ressagging of loose ACSR Conductor of L.T./H.T. line as per RESPO Norms. 12 Grouting & fixing of stay rods (20x1800)mm including all work of excavation, cement concrete in size (0.60x0.60x0.30)m in ratio 1:4:8 cement, sand, 40mm brick ballast as per drg. Including back filling, proper ramming etc and fixing tightening & nozzling of stay wire with stay rod with the poles of required tension as per drawing as per RESPO Drawing/Norms by providing all grouting material and stay clamp made of M.S. Flat of size 50x6mm with proper size bolts & nuts & loops. 13 Earthing of supports with MS earth Rod of (20x2500)mm long including excavation of pit and driving M.S. Rod 3.0 M apart from support and 0.5m below the ground level and connection below the earth electrodes with the help of G.I. wire & earthing lugs as per RESPO Drawing/Norms by providing proper size nuts & bolts. 14 Grouting of following STP Pole supports in CC 1:4:8 (Cement, sand & 40mm brick ballast) Grouting will be done in the block of size (450x450)mm x1/6th of full length of the support, up to ground level, 300mm plinth above the ground level with CC 1:3:6 (Cement, core sand and Stone grit) with mufting as per drawing, work includes back filling & proper ramming by providing all required grouting materials. 15 Fabrication & Fixing of T-channel on pole by providing Holding Clamps, F-Clamps & Poroper size nuts & bolts, as per RESPO/Norms. 16 Removal of old & usedACSR Weasel Conductor from existing line & bundling the same. 17 Removal of old & usedABC Conductor from existing line & bundling the same. 18 Re-straightening of Tilted Pole after digging of pit of suitable size adjustment of PCC Poles/STP as per norms of RESPO Lucknow 19 Removal of old and used STP (Scrap), after digging of pit of suitable size and removal of all accessoiresas per norms of Drawing/RESPO. 20 Carriage of old & damaged STP Scrap (15Nos.), old & damaged ABC (180Kg) & scrap Acsr Weasel Conductor (198Kg). from site of work to Electricity Store Centre Hapur including loading and unloading at both the ends on Kachha and Packka road., 21 T-branch cutting and jumpering work properly as per RESPO/Norms.

Sr No	CorrigendumDate	Corrigendum	CorrigendumType	NewSubmissionDate
1	01-08-2024	Ex date	Date	09-08-2024
2	09-08-2024	exe dated	Date	16-08-2024
3	16-08-2024	date ext again	Date	21-08-2024
4	18-07-2024	Ex dat	Date	25-07-2024
5	25-07-2024	date ex	Date	01-08-2024

INR 1180 /-

INR 5000.0 /-

INR 5 Lakhs /-