Tender For Spr 2000143822 Capital S/D Jobs Csp Caster-1-2-3, Smp-2, Hazira-Gujarat

Tender For Spr 2000143822 Capital S/D Jobs Csp Caster-1-2-3, Smp-2 2000143822 10 10 20 SCRAPING OF OLD PAINT & SURFACE CLEANING 3,000 M2 30 APPLICATION OF TWO COAT EPOXY PAINT 3,000 M2 10 SAND BLASTING & PAINTING 3,000 TO Email : hardik.joshi@amns.in Contact : Name : Hardik Joshi Item Details : Scope of Work SPR NO: - 2000143822 Line-Item 10 SERVICE: - CAPITAL SHUT DOWN JOBS FOR CSP CASTERS, SMP-2. Scope of Work- Vendor: - SLAG BLASTING, CLEANING & PAINTING: - 1. All required equipment’s / skilled manpower for sand blasting & painting job must be provided by vendor. 2. Sand / slag blasting machines, compressors & related equipment’s like spray gun with operator with all transportation will be provided by vendor Minimum 3-4 sets as per requirements. 3. Sand / slag required for blasting with all transportation will be provided by vendor. 4. 3-4 compressor / spray machine for painting will be provided by vendor with all transportation as per department requirement. 5. All scale /sand/slag to be cleaned during shutdown from continuous casting machine, torch cutting machine fume tunnel and tunnel connecting scale pit. 6. Small items like wire, wire brush, pawda, belcha, tagara, paint brush, rollers for cleaning & painting to be provided by vendor. 7. Required all safety items / PPEs for workers to be provided by contractor. 8. Supervisor to be provided by contractor during work on 24 hours basis of 12-12 hours shift. 9. Any labor and supervisor cannot go from working area without permission of machine in charge and shift in charge of caster operation. 10. Vendor must Finish/complete all the jobs of slag blasting, painting & scale cleaning / machine cleaning job in given time periods. 11. Vendor must provide slag blasting compressor with such a capacity that at least 4 parallel slags blasting line / OPRN continues in 2 machines with adequate manpower. 12. Before slag blasting job, water cleaning, chipping work must be done by vendor will be inspected by engineer. 13. 2 coats of colter primer of 200 micron each & 1 coat of Finish paint of 50 micron each to be applied on slag blasted area inside, outside & wherever required. 14. Diesel for compressor will be in vendor scope. 15. Manpower should be competent as per competency matrix as per latest MSA. 16. WSA & Group insurance policy 17. Following company rules and regulation provided by AM/NS Management time to time related to safety HSE and other rules and regulation. 18. All associates attendance, Salary, Invoice related data, Scrum attendance system tracking and request generation for attendance regularization in scrum system as and when required. (If applicable) 19.Transportation BUS facility to be provided to manpower. SAFETY • Contractor shall fulfil all safety and environment rules as per guidelines of AM/NS safety department. Page 2 of 2 ArcelorMittal Nippon Steel India Limited AM/NS HAZIRA PLANT 27th KM, Surat-Hazira Road,,HAZIRA,394270,Gujarat,India GSTIN 24AAACE1741P1ZN PAN AAACE1741P CIN U27100GJ1976FLC013787 Request for Quotation Number 6000116472 Date 09.07.2024 Submission Date 16.07.2024 Coll Req No AMNS deals with OEMs directly. We are very well equipped in every way to import / buy our goods directly from OEMs from any part of the world in a professional manner. We also use the vast global networks of our parent companies where necessary. We do not welcome any contact from intermediaries or Indian Agents of vendors. We assure all OEMs that you do not need to engage anyone to manage your transactions with us.Kindly respond to our RFQs and deal with our officials directly without involving any agents or intermediaries. Offers of vendors who insist on involving intermediaries in dealings with us could be disqualified. Contact for this RFQ null Latha ArunKumar Contact Email latha.arunkumar@ext.amns.in MATERIALS / SERVICES Please acknowledge receipt of the RFQ And provide your best quote for below given RFQ details. SR. No PR No. PR Item RFQ Item Services for line Item Quantity UOM Technical Details Other Details • Contractor shall provide following safety gears with specifications approved by AM/NS to his work force: 1. Safety Helmet. 2. Safety Shoes. 3. Safety Jacket (as per AM/NS standard). 4. Safety Goggles 5. Hand Gloves. 6. Safety Belts 7. Any additional safety gears as requested by AM/NS India. Scope of Work- AM/NS India: - 1. All work permits, electrical connection, work instruction will be provided by AM/NS. 2. All required paints & thinners will be provided by AM/NS for painting job. 3. Specific penalty for non-performance by vendor and must be strictly measured. 4. Penalty will be imposed in case of non-compliance / violation of HSE Norms and supervisor incompetency.

Refer document

Refer document

Refer document