Rate Contract For Supply Of Store Material Divisional Store Of Ed Bandipora For The Year 2024-25

Sharing tender

Rate Contract For Supply Of Store Material Divisional Store Of Ed Bandipora For The Year 2024-25-11 KV Porcelain pin insulators conforming to relevant IS 731 2 Galvanized pins suitable for 11 KV pin insulators. (Weight not less than 0.8 Kg including nuts and washers) 3 11 KV Disc. Insulators (45 KN) conforming to IS 731 complete with fittings suitable upto 0.01 ACSR. 4 G.I. Wire8 SWG of standard quality of relevant IS. 5 Gulvanised Guy wire7/14 SWG of relevant IS 6 11 KV Guy insulator confrming to IS 5300. 7 Drop out fuse set on post type 11 KV pin inulators mounted on ISMC- 75(600mm long) 8 S.L. Clamps 120 mm2. Make as per IS 9 S.L. Clamps 185 mm2. Make as per IS 10 S.L. Clamps 300 mm2. Make as per IS 11 S.L. Clamps 400 mm2.Make as per IS 12 Moulded case circuit breaker (MCCB make Liegrand, Havels, Merlin) 415 V/1100V, 3 phase, 35 KA enclosed in sheet cabinet, power coated complete with bus bars, locking arrangement etc including collars (2 Nos) of 50x6mm flat iron mounting on ST poles:- 100 Amp. 13 Moulded case circuit breaker (MCCB make Liegrand, Havels, Merlin) 415 V/1100V, 3 phase, 35 KA enclosed in sheet cabinet, power coated complete with bus bars, locking arrangement etc including collars (2 Nos) of 50x6mm flat iron mounting on ST poles:- 160 Amp. 14 Moulded case circuit breaker (MCCB make Liegrand, Havels, Merlin) 415 V/1100V, 3 phase, 35 KA enclosed in sheet cabinet, power coated complete with bus bars, locking arrangement etc including collars (2 Nos) of 50x6mm flat iron mounting on ST poles:-250 Amp. 15 Moulded case circuit breaker (MCCB make Liegrand, Havels, Merlin) 415 V/1100V, 3 phase, 35 KA enclosed in sheet cabinet, power coated complete with bus bars, locking arrangement etc including collars (2 Nos) of 50x6mm flat iron mounting on ST poles:- 400 Amp. 16 Almn. Thimbles of Dowells 3-D make:- 400 Sq. mm 17 Almn. Thimbles of Dowells 3-D make:- 300 Sq. mm 18 Almn. Thimbles of Dowells 3-D make:- 185 Sq. mm 19 Almn. Thimbles of Dowells 3-D make:- 120 Sq. mm 20 LT shackle insulators conforming to relevant IS 1445. 21 D-clamps for LT shakle insulators of flat iron 30x4mm duly painted and fabricated. 22 11 KV Gang operator switch with drop out set (including 12 post type insulators heavy duty) with fittings complete of ISMC-75 (Galvanised) including operation rod mechnisim 23 LT Guy Insulators conforming to IS 5300. 24 11 KV Lighting Arrester Set (Station type) complete fittingsconforming to relevant IS 25 11 KV Lighting Arrester Set(line type)complete fittings conforming to relevant IS 26 Guy rod 16mm dia iron rod rod 1.5 mtr long duly Galvinized with 12 length threaded at one end including two nutts and bolts with 1x1 base plate 5mm thick 27 Mannila rope of standard quality:- 3/4 dia 28 Mannila rope of standard quality:-1 dia 29 Polypropelene rope:- 3/4 dia 30 Polypropelene rope:- 1 dia 31 Almn. Paint (nerolac, Berger make) 32 Red oxide paint (nerolca, Berger make) 33 LT separators:- 1 phase 2 wire 34 LT separators:- 2 phase 3 wire 35 LT separators:- 3 pahse 4 wire 36 painting brush 3 37 LT fuse set (3 phase) 400 A consisting of 6 No Almn. Connectors (130x45x12mm) installed on polymer LT insulator/ Procelain insulator and mounted on angle iron frame (40x40x6mm) of size 80x40 cm complete with collars (50x6mm) flat iron for mounting on ST poles. 38 GI Channel iron x-arms of ISMC 100 (9.2 KG/MT) 6 to 9 long, duly fabricated ,and painted with one coat of red oxide and two coats of Almn. Paint. 39 GI Channel iron x-arms of ISMC 75 (6.80 KG/MT) 6 to 9 long, duly fabricatedand painted with one coat of red oxide and two coats of Almn. Paint. 40 GI Channel iron V-cross arms of ISMC 75 (6.80 KG/MT) as per REC specifications duly fabricated and painted with one coat of red oxide and two coats of Almn. Paint. 41 GI Angle iron braces of 50x50x6mm angle (4.5 KG/MT0 3 to 5 long duly fabricated and painted with one coat of red oxide and two coats of Almn. Paint. 42 GI LT brackets of angle iron 50x50x6mm angle (4.5 KG/MT) 3 to 5 long duly fabricated and painted with one coat of red oxide and two coats of Almn. Paint. 43 GIFlat iron collars of 50x6mm flat iron fabricated and painted with one coat of red oxide and two coats of Almn. Paint. 44 GI Top pin clamps duly fabricated from 50x6mm flat iron as per REC specifications and Galvinized and painted with one coat of red oxide and two coats of Almn. Paint. 45 MS Channel iron x-arms of ISMC 100 6 to 9 long, duly fabricated and painted with one coat of red oxide and two coats of Almn. Paint. 46 MS Channel iron x-arms of ISMC 75 6 to 9 long, duly fabricated and painted with one coat of red oxide and two coats of Almn. Paint. 47 MS Channel iron V-cross arms of ISMC 75 as per REC specifications duly fabricated and painted with one coat of Red oxide and two coats of Almn. Paint. 48 MS Angle iron braces of 50x50x6mm angle 3 to 5 long duly fabricated and painted with one coat of Red oxide and two coats of Almn. Paint. 49 MS Angle iron braces of 65x65x6mm angle 3 to 5 long duly fabricated and painted with one coat of Red oxide and two coats of Almn. Paint. 50 MS Angle iron braces of 75x75x6mm angle 3 to 5 long duly fabricated and painted with one coat of Red oxide and two coats of Almn. Paint. 51 MS LT brackets of angle iron 50x50x6mm angle (4.5 KG/MT) 3 to 5 long duly fabricated and painted with one coat of red oxide and two coats of Almn. Paint. 52 MS Flat iron collars of 50x6mm flat iron fabricated and painted with one coat of red oxide and two coats of almn. Paint. 53 MS Top pin clamps duly fabricated from 50x6mm flat iron as per REC specifications and painted with one coat of red oxide and two coats of Almn paint. 54 MS Wide flange beam of sizes (HEA 100 to 360) 55 Supply of 2-Core, 16 mm sqPVC insulatedAlumunium Conductor 650/1100 -V Grade Armoured Cable (Havels / Polycab make) 56 PVC inulated and sheathed un-armoured Aluminium conductor cable 1100V grade of Havels/glouster/Polycab make:- 400 mm2 57 PVC inulated and sheathed un-armoured Aluminium conductor cable 1100V grade of Havels/glouster/Polycab make:- 300 mm2 58 PVC inulated and sheathed un-armoured Aluminium conductor cable 1100V grade of Havels/glouster/Polycab make:- 240 mm2 59 PVC inulated and sheathed un-armoured Aluminium conductor cable 1100V grade of Havels/glouster/Polycab make:- 185 mm2 60 PVC inulated and sheathed un-armoured Aluminium conductor cable 1100V grade of Havels/glouster/Polycab make:- 120 mm2 61 PVC inulated and sheathed un-armoured Aluminium conductor cable 1100V grade of Havels/glouster/Polycab make:-95 mm2 62 11 KV three core XLPE HT Air bunched cable (havels/Glouster/ Polycab make):- 3x35 mm2 + 70mm2 63 11 KV three core XLPE HT Air bunched cable (havels/Glouster/ Polycab make):- 3x70 mm2 + 70mm2 64 11 KV three core XLPE HT Air bunched cable (havels/Glouster/ Polycab make):- 3x95 mm2 + 80mm2 65 11 KV three core XLPE HT Air bunched cable (havels/Glouster/ Polycab make):- 3x120 mm2 + 100mm2 66 Heat shrink cable kits outdoor type with rain sheds of standard make suitable for:-35 mm2 67 Heat shrink cable kits outdoor type with rain sheds of standard make suitable for:-50 mm2 68 Heat shrink cable kits outdoor type with rain sheds of standard make suitable for:-95 mm2 69 Galvanised Nutts and Bolts of Sizes full thread. 70 Washer of Sizes 71 Bamboo ladders 20 long 72 Aluminium ladder 20 long (10 feet two pices with standard rope for adjusting hight with good insulated rubber ends) 73 Bamboo link rods 16 feet long 74 11 KV Isolator with earthing blade with fittings ISI mark 75 Earthing rode of 16 mm dia rod 1.5 mtr long duly galavanised with 6 length threaded at one end include two nuts and bolts 76 11KV link set (post type)600Amp 77 11 KV, Link Set (Stationtype)400Amp 78 Guy wire 18 Mtr long7/14 SWGcomplete with GUY insulator (Fixed at 1/3 length of guy wire ) with Guy Rod 1.5 mtr long duly Galvinized with 12threaded fixed at one end including two nuttswith 1x1 base plate 5mm thick& Turn Bucklewith pole clamp (fixed onanother end) 79 Plaiers heavy duty( big size) with good insulation legs of ISI mark 80 Safety jackets with sizes (heavy) 81 Rubber/Safety Gloves(Electrical 11 KV Rubber Insulating Seamless hand safety gloves(Size XXL,Material----Rubber,Type-Reusable) 82 Safety Helmet conforming ISO: 3873,IS 2925: 1999( PN-542 Shell blast with peak having plastic cradle ) 83 Safety Belti)Belt Material----polyester)ii)Belt Width---upto 50mmiii) RopeMaterial ----Nylon 84 Men`s Black PVC ISI Marked Industrial purpose super safety Gum boots 85 Portable earthing and short circuting Kit suitable for LV/HV earthing 86 Telescopic Earthing/Grounding Stick suitable for overhead HT/LT lines 87 Live line High voltage detector kit 88 Com-N-Long suitable for:- 0.03 ACSR conductor 89 Com-N-Long suitable for:- 0.05 ACSR condutor 90 Com-N-Long suitable for:- 0.1 ACSR conductor 91 Single Phase digital energy meter (10 - 60 ) AMP with optical communication port and batery operated display 92 Single Phase digital energy meter (20- 80 ) AMP with optical communication port and batery operated display 93 Three Phase digital energy meter (20- 80) AMP with optical communication port and batery operated display 94 Three phase Prodigy Digital Energy Meter (40-200) AMP 95 kiosk type outdoor HT meter Units at 11 KV level employing CT/PT combo unit with 3 phase 4 wire CT/PT operated fully static, AMR compatible, DLMS complaint Tri-Vector energy meter, with RS-232 communication port and GPRS modem with 35 mm2 3 core 11 KV cable of length 11 mtr and 9 mtr with cable kits fixied on each end of cable. with earthing strip and rods complete. 96 GI pipe 20 ft long, 1/2 Inch Dia 97 GI pipe 20 ft long, 3/4 inch dia 98 Flexible wire 99 12 V 150 AH Exide Make battery 100 12 V 42 AHExide Make battery 101 Supply of GI mukey clamps with 16 kN (Polymer/ Porcelain) LT Shackle insulator complete. 102 Supply of Toll kit Complete 103 Supply of switches and 3 pin sockets with Gang boxes complete of standard make (Havells/Anchor) 104 Supply of Turpentine oil 105 supply of Nuts and bolts of sizes 106 Suppy and testing of S.T.Poles 9m long ( 540 SP-10-33) 107 Suppy and testing of ST.Poles 8m Long (540 SP-10-15) 108 Suppy and testing of ST.Poles 11m Long (540 SP-10-15) 109 Suppy and testing of PCC Pole 8m long (PCC-WL-250 Kg) 110 Supply of Oil seal for bush road purpose 111 11KV 400 Amperes, Triple pole switches Gang Operated (G.O. Set) conforming: IS-2544, IS: 5340 (Part-III) and SS: 9921 (Part-I -V) 112 11KV 200 Amperes, Triple pole switches Gang Operated (G.O. Set) conforming: IS-2544, IS: 5340 (Part-III) and SS: 9921 (Part-I -V) 113 11 KV D.O. Set (fuse 3-phase 400A)as per Relevant IS. 114 For Earthing of Substation- pipe of 40 mm Nominal bore & 4mm wall thickness & length 2.5 mtr long as per IS 1239. 115 GI strip50mm*6mm for connection of transformer body, G.O Set & lightening Arrestor as per IS 2629/85,(For earthing arrangement) 116 GI strip for neutral earthing of size 75mm*10mm &as per IS 2629/85,(For earthing arrangement) 117 GI strip50mm*6mm for connection of transformer body, G.O Set & lightening Arrestor as per IS 2629/85 118 11 KV Pin Insulator(polymer) with pins (5KN) 119 LT Distribution Box for 63/100 KVA DTR with MCCB for incomer & SFUs for outgoing Circuits. 120 LT Distribution Box for 200/250KVA DTR with MCCB for incomer & SFUs for outgoing Circuits. 121 3-phase,4 wire Trivector Meter with CT with meter box 122 Danger Plate With Clamps as per Standards. 123 Anti Climbing devices(GI Barbed Wire) 124 Sundry items like Aluminum lugs, binding tape,jumpers 125 Pole Collars/Clamps 50x8mm flate iron (Al. Painted) 126 Pole Collars/Clamps 50x8mm flate iron (Galvanised as per IS) 127 HT Fuse Wire for 100KVA DT 128 HT Fuse Wire for 400KVA DT 129 HT Fuse Wire for 250KVA DT 130 HT Fuse Wire for 63 KVA DT 131 HT Fuse Wire for 25 KVA DT 132 HT Fuse Wire for 630KVA DT 133 HT Fuse Wire for 500 KVA DT 134 Pole Collars/Clamps 50x8mm flat iron (Al. Painted) 135 ACSR 100mmSq conforming with the Indian Standard specification IS: 398 (PLI)-1976 and IS : 398 (PL II)- 1976 or the latest version thereof. 136 ACSR 30mmSq conforming with the Indian Standard specification IS: 398 (PLI)-1976 and IS : 398 (PL II)- 1976 or the latest version thereof. 137 ACSR 50mmSq conforming with the Indian Standard specification IS: 398 (PLI)-1976 and IS : 398 (PL II)- 1976 or the latest version thereof. 138 HT Tape 139 Glass wool sleeves of sizes 140 Al. brazing Rod (std. length) 141 Copper brazing rods (standard length) 142 PVC sheets 1mm.thick 143 Empire tape 1” 144 Cotton tape 1” (size) 35m long. 145 HV Bush clamps(MS) 146 Al. clamping member (shoes) for HV Bushing 147 M.S Flat washers 148 Aluminum Welding flux 149 Aluminum flat 4/6/8/10.mm thick of required width. 150 Copper flat 4/6/8/10mm thick of required width. 151 MS plug & caps ½” ¾” 1” 1.1/4” 1.1/2” 152 Oil seal rings (O-rings) for LV/HV bush rods 12.mm dia 153 Oil seal rings(O-rings) for LV/HV bush rods 20mm dia. 154 Oil seal rings(O-rings)for LV/HV bush rods 25.mm dia 155 Creep tape 1” 156 M4 grade CRGO silicon steel core laminations/stampings duly insulation coated, of required size as per sample 157 Empire sleeves of sizes 158 Paint thinner 159 Steel preimer 160 Welding Rods 3.15mm/4mm 161 Re-filling of Oxygen gas 162 Dhoti Cloth/Old Sarries 163 HT Insulation paper 164 Hammers (1Kg-1.5Kg-2Kg) 165 Scissors 166 Chain Saw (of Size) 167 moterized Chain PullyBlock (03 Ton Capacity) 168 supply of Almunium joint breezing point.