Tender For Maintenance Of Internal Electrical Work For Community Center Sector- Gamma-1, 2 And Delta-1, 2, Greater Noida., 1 Boq 2 Wiring Point For Light In 1.5 Sq Mm Frlsh Pvc Insulated Multistrand Single Core Copper Conductor Cable (Drawn Through Ex

Sharing tender

Tender For Maintenance Of Internal Electrical Work For Community Center Sector- Gamma-1, 2 And Delta-1, 2, Greater Noida., 1 BOQ 2 Wiring point for light in 1.5 sq mm FRLSH PVC insulated multistrand single core copper conductor cable (drawn through existing concealed PVC conduit), and 5 Amp flush type switch & ceiling rose/angle/batten holder fixed with 3mm thick phenolic laminated backalite sheet with brass machine screws and cup washers mounted over existing MS. switch board box/ junction box with supply of all material, labour & T&P etc required for proper completion of the work as directed at site by the Engineer in charge (UPPWD-2018/174) 3 Wiring point for ceiling fan in 1.5 sq. mm FRLSH PVC insulated multistrand single core copper conductor cable (drawn through existing concealed PVC conduit) and 5 Amp flush type switch & ceiling rose/angle/batten holder fixed with 3mm thick phenolic laminated backalite sheet with brass machine screws and cup washers mounted over existing MS switch board box/ junction box with supply of all material, labour & T&P etc. required for proper completion of the work as directed at site by the Engineer in charge (UPPWD-2018/174) 4 Supply and fixing of power plug with 15A/250 volt flush type switch and 5 pin 15A/250V flush type modular socket in suitable MS box of 175mm x 100mm x 50mm size with phenolic laminated bakelite sheet cover 3mm thick fixed with brass machine screw and cup washer item no.1139+187C 5 Supply and Wiring of submains with 2 nos 2.5 sq mm FRLSH PVC insulated multistrand copper conductor cable in existing conduit complete with supply of all material labour and T&P required for proper completion of the work as directed at site by Engineer in charge item no.289 P 6 Same as in itme no. 289 but with 3 nos. 4 sq. mm. FRLSH PVC insulatedmultistrand copper conductor cable. item no.289 B 7 S & F surface/Flush mounting 12ways TPN distribution board with additional metal door without MCB complete in all respect, as directed at site by Engineer in charge. CAT-B item no.1029B 8 S&F of 63 Amp. 4 Pole Isolator CAT- B item.no.1007 B 9 S&F single pole MCB blanking plate cat. B item no 1034 B 10 S&F of 6 Amp to 32 Amp. SP MCB (10 KA) C Curve CAT-B item no.1002 11 Supply of 1200mm sweep ceiling fan complete with double ball bearings.bladers, down rod, shackle insulator, canopy etc. complete as requireditem no 1501 model- BEE 4 star rating 1200 mm sweep. 12 Erection and testing of ceiling fan and regulator etc. excluding supply ofdown rod, complete in all respect. (UPPWD-2018/1115) 13 Motor winding of following size ceiling fan 1200mm (FTS-121235/21-22) 14 Supply, Installation, testing and commissioning of 300mm dia exhaust fancomplete in all required (AR) FTS-131561 15 Supply and fixing of electronic fan regulator( Modular) 120-280 V ISI marked, on the existing switch board including making connections required material, labour T&P etc. for proper completion of work to theatisfaction of Engineer in charge of work. (Item no. 1203c) 16 Supply and fixing of LED Tube Light with batten suitable for up to 1 X 22 watt LED tube light fitting including tube on Surface complete in all respect CAT-AA Item no.1413 17 Supply and fixing of LED Street light Fitting having die cast aluminum body and diffuser with driver set suitable for 52 watt to 72 Watt Confirming to IP66 Protection complete in all respect CAT AA (UPPWD-1422) 18 Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Voits grade at a depth of 750 mm below ground level over a cushion of 75 mm thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S clamps etc of suitable size or as directed by the Engineer-Incharge. complete in all respect The armouring of the cable shall be properly connected with the earth conductor by clamps etc as per up pwd schedule 2018 item no 501 19 3.5CX120sqmm 20 Supply and fixing of plain or pin type copper tin plated cable socket (Lugto the cable leads, insulating with tape and making connection etccomplete in all respect as per direction of the Engineer-Incharge. Up pwdschedule 2018 item no 504 21 3.5CX120sqmm 22 Supplying and fixing following piano type switch on the existing switch box/cover including connections etc. as required. 5/6 amps switch (DSR-1.23) 23 Supplying and fixing following piano type socket on the existing switch box/cover including connections etc. as required. 5/6 amps switch (DSR-1.23) 24 Supply and burying of 40mm dia x 4.5 metres long G.I. Pipe vertically for earthing having 12mm dia. Holes spaced 75mm apart drilled up to 2 metre from the bottom complete with earthing lead of No. 6 to 8SWG GI wire in G.I. Pipe up to appron (and from appron to switch board the cost of G.I. wire and pipe will be extra) upto switch board, 30cm square C.I. box with hinged cover masonary enclosure, funnel at top, alternate layers of charcoal/coke and salt at least 150mm thick alround etc. as per directions of Engineer-in-charge complete in all respects as per drawing.As per UPPWD Schedule-701 25 Supply and laying of 25mm x 3mm G1 stop from earth ciectrode directly in the ground as required complete in all respect (UPPWD-2018/716) 26 S&F of 250 Amp 4 pole MCCB (25 KA) Thermal Magnetic release (UPPWD2018/1021G) CAT-B 27 S/L of 90mm dia DWC pipe for drawing of power cable across the road bydrilling of 120mm dia at 1mtr. Below the road level thereby doing the workproviding DWC pipe by manual Trenchless method. (ERP-2023/967) 28 Labour Cess will be paid extra as per applicable 29 GST will be paid extra as per applicable