|
| 1 | Demolition of brick work or stone / boulder masonary, built in cement mortar including all quoins, arches pillars etc but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and directed. |
| 2 | M&L for Machine cut Laterite stone masonryas block-in-course masonry well bonded exc. 10 cm in width and setting in cement mortar 1:4 all as specified and as directed. |
| 3 | M&Lrendering 15mm thick in CM 1:4on surfaces other than fair face of stone masonary work finished even and smooth using sagol finishcomplete all as specified and directed. |
| 4 | Dismantling asbesots cement (corrugated, semi-corrugated etc) sheets in roof coverings Complete all as specified and directed. |
| 5 | S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of colour having tensile strength of 550 Mpa as iin roof covering/cladding to wall, fixed with self tapping screws including dismantling complete all as specified and as directed. . |
| 6 | S&F prepainted galvalume aluminium zinc coating GI basedplain steel sheet 0.50 mm thick ofcolour having tensile strength of 550 Mpa as inplain sheet as in ridges, gutters , facia bd etcl, fixed with self tapping screws or \"J\" /\"L\"hooksincluding dismantling complete all as specified and as directed. . |
| 7 | Taking down cement plaster any descriptionfrom walls/ceiling including racking out joints hacking for key scrubbing down with water etccomplete all as specified and directed. |
| 8 | M&L for rendering 15mm thick plaster in CM (1:4) on stoneor concrete surfacesfinished even & smoothcomplete all as specified and as directed. |
| 9 | M&L forrendering 15mm thick plaster in CM (1:6) on stoneor concrete surfacesfinished even & smooth, complete all as specified and as directed. |
| 10 | All as per item No 9 herein before but 10mm thick in CM (1:3) on ceiling, complete all as specified and as directed. |
| 11 | M&L for two coats of oil bound distemper over and applying plaster of paris putty of 1 mm thickness over plastered surface to prepare the surface even and smoothsurfacees, oil bound distemper over a coat of primer on newly plastered surface using roller only as per manufacturers instruction, complete all as specified and as directed. |
| 12 | M&L for three coats of white wash on newly plastered surface on ceiling, complete all as specified and as directed. |
| 13 | M&L for preparation of newly plastered surfaces of wall and applying two coat of cement base paintcomplete all as specified and as directed. |
| 14 | Demolition of reinforced cement concrete of any description and in any position no otherwise specifically provided for as in cover slabs (for man holes, septic tank, soak well etc) complete all specified and as directed. |
| 15 | M&L for slabs supported on walls, beams and columns in floors, roofs, kitchen slabs, balconies, canopies made in RCC 1:2:4 type B1 using 20mm graded aggrall as specified and as directed. |
| 16 | MS bars (TMT) 10mm dia and over cut to length bent to shape reqd incl cranking binding spirally for hooking for cols and binding with and inc mild steel wire (Annealed) not less than 0.9mm dia as in reinforcement Complete all as specified and directed. |
| 17 | Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressum-mers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etccomplete all as specified and directed. |
| 18 | Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofsexc 5 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 5 cm but n exc 10 cm widecomplete all as specified and directed. |
| 19 | Dismantling of stone slab of any description including cement mortar bedding but not backing, complete all as specified and as directed. |
| 20 | M&Lfor 18 to 20 mm thick granite of any type/colour as approved,work (tablerubbed mirror polished) edges rounded chamfered and bull nosed laid and fixed in any position (Vertical/Horizontal/Inclined) over and including cement screed over Cement mortar bedding in CM(1:4) 10 thick and pointed in white or colour cement with admixer of pigment to match with shade of granite stone incl grinding and polishing complete all as specified and as directed. |
| 21 | Demolition of cement concrete in ground floor and pavings nexc 15cm thickness (below or above ground level)complete all as specified and directed. |
| 22 | M&L 25mm thick PCC (1:2:4) type B-0 (using 12.5mm graded stone aggregate) on floor as sub base or roof surface to bring uniform surfaces complete all as specified and directed |
| 23 | M&L non skid cermic colouredtiles 8mmthick ( square or rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18sqm,in floor etc and jointed in neat cement slurry andpointed in white cement or coloured cement to match the shade of tile over and including 15mm thick screed bed or bedding layer in CM (1:6) all as specified and directed |
| 24 | M&L non skid cermic colouredtiles 8mmthick ( square or rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18sqm, on dado / skirtingetc and jointed in neat cement slurry andpointed in white cement or coloured cement to match the shade of tile over and including 10mm thick screed bed or bedding layer in CM (1:4) all as specified and directed |
| 25 | Dismantling floor, hearth or wall tiling incl cement mortar bedding (but not backing), removing serviceable tiles to store andrubbishoff the premises, complete all asdirected. |
| 26 | S&F glazed ceramic coloured tiles in vertical surfaces 450x300x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match incl cutting to reqd shape and size over and including 10mm thick plaster in CM (1:4) on vertical surfaces as backing coat |
| 27 | M&L for 75 mm thickPCC 1:2:4 type B2 (using 40mm graded aggr) as in path/hard standing, finished with smooth even surface all as specified and directed |
| 28 | M&L for 75 mm thick PCC 1:3:6 type C-1 (20mm graded aggregate ) plinth protection and similar work surface even and fair without using extra cement all as specified and directed, |
| 29 | Taking down chowkats or frames with shutters w/o taking off shutters from the frames n.exc 1.5 Sqm each,complete all as specified and as directed. |
| 30 | Taking down chowkats or frames with shutters) w/o taking off shutters from the frames exc 1.5 Sqm and n.exc 4.0 sqm each each, complete all as specified and as directed. |
| 31 | Taking down shutter of any description exc 1.00 Sqm and not exc 2.00 sqm each , complete all as specified and as directed. |
| 32 | S&F second class hard wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixedcomplete all as specified and directed. |
| 33 | Treating the back of Chowkats Surfaces of any description wood, steel, iron, concrete, brick, stone, etc., exceeding 10cm in width or girth Black bitumin-ous paintcomplete all as specified and directed. |
| 34 | S&F 35mm thick Glazed skeleton door shutters, open rebated and prepared to receive glass, Gauze etc (with out sashbars) edges of framing plain, chemfered or rounded, fitted with cut and mitred beads for securing glass, gauze etc, size of members of shutters as specified in SSR Part-I Section 8, clause.8.24 (a), using IInd Class Hard wood complete all as specified and as directed. |
| 35 | S&F30mm thick flush shutter, soild core construction, with block board core and plywood face panels, commercial type on both sides including following fittings and fixturescomplete all as specified and directed. |
| 36 | S&F for 35mm thick,IInd class hard wood,plain framed,paneled shutter (two panel) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part-I), kiln seasoned and chemically pressure treatedcomplete all as specified and directed. |
| 37 | Refixingshutter of same opening any descriptionexc 1.00 Sqm and n.exc 2.0 Sqm each complete all as specified and as directed. |
| 38 | S & Fgalvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanised wire staples all as specified and as directed. |
| 39 | S&F in 3mm thick plain glass, ordinary quality and glazing with oil putty in squares n.exc 0.5 Sqm in each panecomplete all as specified and directed. |
| 40 | S & F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet, reinforced with M.S. square tube and fixing in opening as per specification & drawing complete all as specified and as directed. |
| 41 | S&F factory made solid panel pvc door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C\" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at siteall as specified and directed. |
| 42 | M&L for preparation of new or previously untreated wooden surfaces over 10 cm in width or girth and applying two coats of synthetic enamel paint over one coat of pink primer, complete all as specified and directed |
| 43 | S&Fframed work such as grills, gratings etc. with ends of bars shouldered and or rebated or forged into spikes, framed guard bars etc confirming to Fe-290-Gde-E-165 complete all as specified and as directed. |
| 44 | M&L for preparation of new or previously untreated steel surfaces over 10cm in width or girth and applying two coats of synthetic enamel paint over one coat of red oxidecomplete all as specified and directed. |
| 45 | S&F 150 mm long anodised aluminium handles, cast type complete all as specified and as directed. |
| 46 | S&F in repairs for 150 mm long anodised aluminium handles, cast type complete all as specified and as directed. |
| 47 | S&F for 150 mm long anodised aluminiumbarrel tower bolt of extruded section complete all as specified and as directed. |
| 48 | S&F in repairs for 150 mm long anodised aluminiumbarrel tower bolt of extruded section complete all as specified and as directed. |
| 49 | S&F 300mm long aluminium anodised sliding door bolt with hasp staple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixedcomplete all as specified and directed. |
| 50 | S&F in repair 300mm long aluminium anodised sliding door bolt with hasp staple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixedcomplete all as specified and directed. |
| 51 | S&F butt hinges, 100 mm extuded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed type B-21complete all as specified and directed. |
| 52 | S&F in repairs for butt hinges, 100 mm extuded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed type B-21complete all as specified and directed. |
| 53 | S&F 300mm MS ordinary rat tail spring (Helical door spring)including roller and roller plate complete all as specified and directed. |
| 54 | S&F in repair 600 x 450 mm and 5.5 mm thick glass bevelled edge mirror of selected quality glass mounted on 6 mm thick AC building board or commercial ply woodand fixed wooden plugs with CP brass screws and cup washers complete all as specified and directed. |
| 55 | S&F15 mm bore GI water tubemedium grade with all fittings and fixed to wall, floor and ceiling etc, complete including taking down all as specified and as directed. |
| 56 | S&F20 mm bore GI water tubemedium grade with all fittings and fixed to wall, floor and ceiling etc, complete including taking down all as specified and as directed. |
| 57 | Cutting chases pinning in, making good to facing where required & pointing in CM 1:3 for concealed water tubing not exc 10CM girth in brick wall, complete all as specified and as directed. |
| 58 | S&F in repair vitreous china wash hand basin, (white), flat back of size 550x400 mmwith and including two CI brackets, brass chromium platedincl waste coupling fittings andPVC waste pipe complete all as specified and as directed. |
| 59 | S&Fin repairs ISI marked 15mm bore, chromium plated bib tap long body fancy type of cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed. |
| 60 | S & F in repairs 15 mm dia bore cast copper alloy chromium plated angle cock/stop cock with long shank and cup (concealed type) screwed down high pressure with capstan head, screwed both ends for iron pipes or for union and fixed, complete all as specified and as directed. |
| 61 | S & F in repairs 15 mm dia bore fancy type pillar taps ,cast copper alloy chromium platedscrewed down high pressure with or without lettered \"Hot\" or \"Cold\" with capstan head, screwedfor iron pipes or for union and fixed, complete all as specified and as directed. |
| 62 | S&F in repair 32 mm CP Waste coupling for Sink/WHB complete all as specified and as directed |
| 63 | S&F in repair brass chromium plated over head shower rose with arm 125 mm size with long bodywith swivel joint including fixing to steel pipe or union, complete all as specified and as directed. |
| 64 | S & Fin repair Vitreous China squatting pan, `Orissa` pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern) complete all as specified and as directed. |
| 65 | S&F in repairs vitreous china wash down water closet pan (pedestal pattern) coloured (including two Nosfixing bolts incl PVC seat cover but excludingflushing cistern and flush pipe) complete includingmaking good to floor with and including fixing of P or S trap, complete all as specified and as directed. |
| 66 | S&F in repair PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet ball valve, float and handle including brackets., flush pipe of polyethylene of low or high density or PVC 32mm dia for low level flushing cistern, PVC connection 450 mm longcomplete all as directed. |
| 67 | S&F in repair PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and as directed. |
| 68 | S&F in repair soap dish, brass, chromium plated fixed to wall with brass chromium plated screw, complete all as specified and as directed. |
| 69 | S&F in repair CP towel rail 20 mm dia D type, 60 cm long fixed with CP screws and rowel plug inwall, complete all as specified and as directed. |
| 70 | S&F in repair sheet glass shelf consisting of 5.5mm thick sheet glass self assembly 12cm width with chromium plated guard and railing 60cm long, complete all as specified and as directed. |
| 71 | S&F repairrotational moulded PVC water tanks cylinderical with closed top hoisted and fixed in position of 500 Ltrs capacity all as specified in SSR Part Iincluding dismantling existing tank..Make : SINTEXISI MARKED/ROTEX/JINDALcomplete all as specified and directed. |
| 72 | S&F repair rotational moulded PVC water tanks cylinderical with closed top hoisted and fixed in position of 1000 Ltrs capacity all as specified in SSR Part Iincluding dismantling existing tank..Make : SINTEXISI MARKED/ROTEX/JINDALcomplete all as specified and directed. |
| 73 | S&F 20 mm PVC float valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe, complete all as specified and as directed. |
| 74 | S&F in repair PVC (SWR) pipe 110 mm dia, conforming to IS-13592-1992 type \"B\", single socketed in any length with rubber ring joint fixed to walls with clamp including taking down all as specified and directed. |
| 75 | S&F in repair PVC (SWR) pipe 75 mm dia, conforming to IS-13592-1992 type \"B\", single socketed in any length with rubber ring joint fixed to walls with clamp including taking down all as specified and directed. |
| 76 | S&F in repair PVC (SWR) bend any radius, 110 mm dia all as specified and directed.. |
| 77 | S&F in repair PVC (SWR) junction single \"T\" equal with access door 110 mm dia complete all as specified and directed. |
| 78 | S&F in repairs low density polyethylene (LDPE) pipe of pressure rating 6 Kg/Sqcm, 50mm bore, complete all as specified and as directed. |
| 79 | M&LforPCC 1:2:4 type B-0 (using 12.5mm graded stone aggregate ) as in coping including necessary formwork etc complete all as specified and directed |
| 80 | M&L for 100 mm thickPCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in Sub base for path/hard standing ,complete all as specified and as dircted. |
| 81 | S&F in repairs PVC water closet seat cover white, closed pattern and mild steel chromium plated or aluminised hinging device |
| 82 | S&F in repairschromium plated health faucet8mm dia 1 mtr long cp flexible tube with wall hookand zet sutable for 15 mm bore pipe or for union and fixedof approved make, complete all as specified and as directed. |
| 83 | M&L for preparation of old decorated plastered or unplastered surface of walland applying one coat of white wash, complete all as specified and as directed. |
| 84 | All as per item No 83 hereinbefore but as on ceiling complete all as specified and directed. |
| 85 | M&L for preparation of old decorated surfaces of wall and applying one coat of oil bound distemper including making good the surface by filling with wall care putty making surface even and smooth, complete all as specified and as directed. |
| 86 | M&L for preparation of old decorated surfaces of wall and applying two coat of oil bound distemper including making good the surface by filling with wall care putty making surface even and smooth, complete all as specified and as directed. |
| 87 | M&L for complete removal of existing treatment and applying two coats of oil emultion distemper over a coat of primer over a coat of 1 mm thick exterior wall care putty including preparation of surface using roller only as per manufacturers instruction, complete all as specified and as directed. |
| 88 | M&L for preparation of old decorated surfaces of wall and applying one coat of cement base paint complete all as specified and as directed. |
| 89 | M&L for preparation of old decorated surfaces of wall and applying one coat of exterior grade emulsion paint including making good the surface by filling with wall care putty complete all as specified and as directed. |
| 90 | M&L for preparation of old painted wooden surfaceand applying one coat of synthetic enamel paintof any description exc 10 cm width or girth, complete all as specified and as directed. |
| 91 | M&L for preparation of old painted steel surfaces over 10cm in width or girth and applying one coat of syanthetic enamel paint, completeall as specified and as directed |
| 92 | Taking down cement plaster including raking out joints hacking for key, scrubbing down with water, complete all as specified and as directed |
| 93 | M&L for Rendering 15mm thick in CM (1:4) on fair faces of brick or Concrete Surfaces Mixing WPC @ 3% by wt of cement and finished even & smooth without using extra cement, complete all as specified and as directed. (Note : WPC shall be measuredand paid separately) |
| 94 | M & L for rendering 15 mm thick on other thanfair faces of Brick wall finished fair & even in CM (1:6), complete all as specified and as directed. |
| 95 | Supply only water proofing compoundcomplete all as specified and directed. |
| 96 | M&L for preparation of newly plastered surfaces of wall and applying two coats of oil bound distemper over a coat of primer over a coat of 1 mm thick exterior wall care putty including preparation of surface using roller only as per manufacturers instruction, complete all as specified and as directed. |
| 97 | M&L for preparation of newly plastered surfaces of wall and applying two coat of cement base paint incl preparation of surfacecomplete all as specified and as directed. |
| 98 | Cleaning of blocked in sewage line of any dia 100 mm to 200 mm by rodding from one MH to next MH and washing through in fresh water including removing all sludge from the sewage line and man hole including removingexisting MH cover and refixing properly after cleaning and removing all sludge outside MD land all as specified and directed. |
| 99 | Cleaning of MH of any description of size not exceeding 1.5 m in depth including lifting lifting up andd removing sludge and accumulated/ semi solid sludgeand other foreign materialwith trailer mountedsewage cleaning pump s/mechanical devices and removing to a distance not exceeding 250 m where directedby Engr-in-Charge & washing down with water for smooth fuctionof sewage all asspecified and directed. Note : The sewage cleaning pump & all equipment at site are to be arranged by contractorcomplete all as specified and directed. |
| 100 | M&L removal of blockage from WC by using rubber cup 125mm dia with wooden handle and clearing the blockage upto manhole with cleaning rod including removal of all materials from \"P\" trap of WC andremoval of blockage from kitchen/Bathroom /WHB by using rubber cup 125mm dia and clearing the blockage upto gully traps with cleaning rod including removal of all materials from floor trap including dismantling and refixing of gratings.(qtrs from ground floor to 3rd floor) all as specified and directed. |
| 101 | Cleaning of septic tanks of 100 users capacity by bailing out water, removing sludge dust mud and other accumulated solids, semi solids etc including cleaning & sewage sludge and other materials with trailer mounted sewage cleaning pump/ mechnical device and deposit outside the MD land and near STP plant. all as specified and directed. Note:-( a ) Cleaning septic tanksmonthly once during non rainy season using sewage cleaning pump.(b) cleaning septic tanks monthly twice during rainy season as available reach it full capacity using sewage cleaning pump.(c) The sewage cleaning pump & all equipment at site are to be arranged by contractorcomplete all as specified and directed. |
| 102 | Cleaning and removing all scale and dirt, etc. from 500 to 1000 ltr tanks and from mouths of circulating pipes, etc, Note :- The tank should be cleaned bybleaching powder and cleaningdate to be mention on the tank all as specified and directed |
| 103 | Excavation in trenches not exc 1.5 m wide and not exc 1.5 m in depth and getting out in soft/loose soil as in foundation of manholes and SGWG pipeline all as required and directed. |
| 104 | Excavation in trenches not exc 1.5 m wide but depth exc 1.5 m and not exc 3.00m and getting out in soft/loose soilcomplete all as specified and as directed. |
| 105 | M&L for PCC (1:4:8) type D2, using 40 mm graded crushed stone stone aggregate as in foundation filling and mass concrete complete all as specified and directed. |
| 106 | Returning filling in including spreading, levelling, watering and well ramming in layer not exc 25 cm in soft/loose soil complete all as specified and as directed. |
| 107 | Removing excavated materials to a distance not exceeding 50 m and depositing at a level not exceeding1.5 m from starting point. |
| 108 | M&L for salt glazed stone ware drain pipes grade \"A; 100 mm bore laid in trenches and jointed in CM (1:1) including demolition and breaking up old drain pipes complete all as specified and directed. |
| 109 | M&L for salt glazed stone ware drain pipes grade \"A; 150 mm bore laid in trenches and jointed in CM (1:1) including demolition and breaking up old drain pipes complete all as specified and directed. |
| 110 | M&L for PCC (1:4:8) type D2 (using 40 mm graded stone aggregate) as in concrete bed to SGSW drain pipes 100 mm bore including packing under, and haunching against the sides of pipes after they are laid and tested along with demolition of existing concrete bed complete all as specified and directed. |
| 111 | M&L for PCC (1:4:8) type D2 (using 40 mm graded stone aggregate) as in concrete bed to SGSW drain pipes 150 mm bore including packing under, and haunching against the sides of pipes after they are laid and tested along with demolition of existing concrete bed complete all as specified and directed. |
| 112 | Cutting into existing manholes for connecting new drain, making good to pipe 100 mm bore and rendering cutting out existing benching for and formingbranch channel (½ round or ¾ section) in cement concrete 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) smooth finished, and reforming benching as required all as specified and directed. |
| 113 | Demolition of reinforced cement concrete of any description and in any position no otherwise specifically provided for as in cover slabs (for man holes, septic tank, soak well etc) complete all specified and as directed. |
| 114 | Separating, scraping and cleaning of reinforcement (Demolition of concrete measured separately) complete all as specified and as directed. |
| 115 | M&L for precast RCC (1:2:4) nominal mix, type B1, using 20 mm graded stone aggregate as in landing, cover slabs (for man holes, septic tank, soak well etc) chullah hoods, chajjas water troughs, manholes, shelves and similar article set in CM (1:4), complete all as specified and as directed.Note:- Reinforcement shall be measured and paid separately. |
| 116 | S&F for Mild steel TMT bars 6 mm to 8 mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire annealed) not less than 0.9mm dia complete all as specified and as directed. |
| 117 | Taking down cement plaster on brickwalls, etc. including raking out joints, hacking for key, scrubbing down with water, etc to receive new plaster complete all as specified and as directed. |
| 118 | Demolition brick work built in cement mortar of any description complete all as specified and as directed. |
| 119 | M&L for Machine cut Laterite stone masonryas block-in-course masonry well bonded exc. 10 cm in width and setting in cement mortar 1:4 all as specified and as directed. |
| 120 | M&Lrendering 15mm thick in CM 1:4on surfaces other than fair face of stone masonary work finished even and smooth using sagol finishcomplete all as specified and directed. |
| 121 | S&F in repairs PVC (SWR) pipes 110 mm single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed. |
| 122 | S&F in repairs PVC (SWR) pipes 110 mm single socketed, in any length with rubber ring joints,fixed to wallswith pipe clips spacing at 1.50 metre c/c including taking down old PVC pipes complete all as specified and directed. |
| 123 | S&F in repairs PVC (SWR) bend any radius, 110 mm dia with access door with solvent cement joint complete all as specified and as directed. |
| 124 | S&F in repairs PVC (SWR) junction single \"T\" equal with access door 110 mm dia with solvent cement joint complete all as specified and directed. |
| 125 | S&F in repairs PVC (SWR) branch piece, single (single Y) equal or unequal 110 mm dia with solvent cement joint complete all as specified and directed. |
| 126 | S&F in repairs for PVC (SWR) pipe 75 mm dia, conforming to IS-13592-1992 type \"B\", single socketed in any length with solvent cement joint fixed to walls with pipe clips spacing at 1.50 metre c/c including taking down old PVC pipes complete all as specified and directed. |
| 127 | S&F in repairs PVC (SWR) bend any radius, 75 mm dia with solvent cement joint complete all as specified and as directed. |
| 128 | S&F in repairs PVC (SWR) junction single \"T\" equal with acess door 75 mm dia with solvent cement joint complete all as specified and directed. |
| 129 | S&F in repairs PVC (SWR) vent cowl of 110 mm dia complete all as specified and as directed. |
| 130 | S&F in repairs low density polyethylene (LDPE) pipe of pressure rating 6 Kg/Sqcm, 50mm bore including bend and tee, complete all as specified and as directed. |
| 131 | S&F in repairs 15 mm PVC float valve high pressure of PTMT with epoxy coated aluminum rod and high density plastic ball screwed for iron pipe, complete all as specified and as directed. |
| 132 | S&F in repair 20 mm PVC float valve high pressure of PTMT with epoxy coated aluminum rod and high density plastic ball screwed for iron pipe, complete all as specified and as directed. |
| 133 | M&L for preparation of old decorated surfaces of wall and applying one coat of oil bound distemper including making good the surface by filling with wall care putty making surface even and smooth, complete all as specified and as directed. |
| 134 | S&F in repairs PVC water closet seat cover white, closed pattern and mild steel chromium plated or aluminised hinging devicecomplete all as specified and directed. |
| 135 | S&F in repairschromium plated health faucet8mm dia 1 mtr long cp flexible tube with wall hookand zet sutable for 15 mm bore pipe or for union and fixedof approved make, complete all as specified and as directed. |
| 136 | S&F in repair CP towel rail 20 mm dia D type, 60 cm long fixed with CP screws and rowel plug inwall, complete all as specified and as directed. |
| 137 | S&F in repair sheet glass shelf consisting of 5.5mm thick sheet glass self assembly 12cm width with chromium plated guard and railing 60cm long, complete all as specified and as directed. |
| 138 | S&Fin repairs ISI marked 15mm bore, chromium plated bib tap long body fancy type of cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed. |
| 139 | S & F in repairs 15 mm dia bore cast copper alloy chromium plated angle cock/stop cock with long shank and cup (concealed type) screwed down high pressure with capstan head, screwed both ends for iron pipes or for union and fixed, complete all as specified and as directed. |
| 140 | S & F in repairs 15 mm dia bore fancy type pillar taps ,cast copper alloy chromium platedscrewed down high pressure with or without lettered \"Hot\" or \"Cold\" with capstan head, screwedfor iron pipes or for union and fixed, complete all as specified and as directed. |
| 141 | S&F in repair 32 mm CP Waste coupling for Sink/WHB complete all as specified and as directed |
| 142 | S&F in repair brass chromium plated over head shower rose with arm 125 mm size with long bodywith swivel joint including fixing to steel pipe or union, complete all as specified and as directed. |
| 143 | Dismantling floor hearth and wall tiling including cement mortar bedding (but not backing), removing rubbish off the premises, complete all as specified and directed. |
| 144 | M&L forVitrified coloured ceramic tiles (Light Shade) 10 mm thick (square or rectangular) area of each tile not exceeding 0.36 sqmin floor etc set and jointed in neat cement slurry andpointed in white cement or coloured cement to match the shade of tile over 15 mm thick screed bed or bedding leyer in CM (1:6)complete all as specified and as directed. |
| 145 | All as per item No 144 hereinbefore but on dado/ skirting over 10mm thick screed bed in CM (1:4) complete all as specified and as directed. |
| 146 | Dismantling of stone slab of any description including cement mortar bedding but not backing, complete all as specified and as directed. |
| 147 | M&Lfor 18 to 20 mm thick granite of any type/colour as approved,work (tablerubbed mirror polished) edges rounded chamfered and bull nosed laid and fixed in any position (Vertical/Horizontal/Inclined) over cement screed over Cement Mortar bedding in CM (1:4) 10 thick and pointed in white or colour cement with admixer of pigment to match with shade of granite stone incl grinding and polishing complete all as specified and as directed. |
| 148 | S&F in repair 20mm dia curtain rails, mild steel, chromium plated with fixing bracket stops, rollers etc, complete all as specified and as directed. |
